T13 进排气与燃油供给系统 标准查询与下载
共找到 596 条与 进排气与燃油供给系统 相关的标准，共 40 页
This part of ISO 12619 specifies tests and requirements for the pressure regulator, a compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This part of ISO 12619 is applicable to vehicles using CGH2 in accordance with ISO 14687-1 or ISO 14687-2 and hydrogen/natural gas blends using natural gas in accordance with ISO 15403-1 and ISO/TR 154032. It is not applicable to the following: — liquefied hydrogen (LH2) fuel system components; — fuel containers; — stationary gas engines; — container mounting hardware; — electronic fuel management; — refuelling receptacles. NOTE 1 It is recognized that miscellaneous components not specifically covered herein can be examined to meet the criteria of this part of ISO 12619 and tested according to the appropriate functional tests. NOTE 2 All references to pressure in this part of ISO 12619 are to be considered gauge pressures unless otherwise specified. NOTE 3 This part of ISO 12619 may not apply to fuel cell vehicles in compliance with international regulations.
Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components - Part 3: Pressure regulator
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2014-06
- 实施
Road vehicles - Blended fuels refuelling connector
- ICS
- 43.060.40;75.200
- CCS
- T13
- 发布
- 2014-06
- 实施
Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M8 x 1 glow-plugs
- ICS
- 43.060.50
- CCS
- T13
- 发布
- 2014-05-31
- 实施
- 2014-05-31
本标准规定了乘用车空气滤清器(以下简称空滤器)及滤芯的技术要求、试验方法、检验规则,滤芯作为空滤器的核心元件,其所有技术要求对空滤器均适用。本标准适用于体积流量为900m3/h以下的乘用车空气滤清器及滤芯。其他空滤器及滤芯可参照使用。
Passenger car air filter technical specification
- ICS
- 43.060.20
- CCS
- T13
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本标准规定了电感耦合等离子体原子发射光谱(ICP-AES)法和电感耦合等离子体质谱(ICP-MS)法测定金属催化转化器中铂(Pt)、钯(Pd)、铑(Rh)含量的测定方法。本标准适用于以金属为载体并附载贵金属作活性组分的催化转化器中贵金属Pt、Pd、Rh含量的测定。
Determination methods of platinum, palladium and rhodium contents in metallic catalytic converters
- ICS
- 43.060.20
- CCS
- T13
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本标准规定了汽车金属燃油箱的技术要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于M和N类汽车所装车用汽油、车用柴油的金属燃油箱。醇类燃油、生物制燃油、煤制油等车用燃料的金属燃油箱可参照执行。塑料燃油箱用燃油箱盖和加油口的型式及连接尺寸也可参照执行。
Specifications for automobile metal fuel tank
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2014-05-06
- 实施
- 2014-10-01
This part of ISO 12219 specifies a chamber based, static headspace type method for measuring volatile organic compounds (VOCs), formaldehyde and other carbonyl compounds which may diffuse from vehicle interior unit components into the cabin air. The chamber emission test is intended to provide characteristic emission of unit component to car interior of assembly level emission. It also specifies the emission test chamber, preparation of the test specimen, connection of the vapour sampling devices and test conditions. This method is valid for new car interior unit components intended for vehicles, and can also be used for car interior unit components disassembled from assembly of car interior trim or used cars. A set of multi-unit components could be applicable according to the test purpose. A dynamic mode operation of emission chamber could be applied if corroborative information of the unit component emission between this method and small chamber method (ISO 12219-4:2013) is desired. The specified analytical procedure for VOCs (ISO 16000-6) is valid for the determination of VOCs ranging in concentration from sub-µg/m3 to several mg/m3. The method is applicable to the measurement of non-polar and slightly polar VOCs ranging in volatility from n-C6 to n-C16. Some very volatile compounds (VVOC) and semi-volatile organic compounds (SVOC) can also be analysed (see informative Annex D of This part of ISO 12219 is complementary to existing standards and provides third party test laboratories and manufacturing industry with an approach for: — comparing emissions from various unit components (sub-assemblies) with VOC emissions from related complete assemblies measured in other tests, — evaluating and categorising specific unit components by their VOC emission data, — comparing and correlating emission from unit components with VOC emission data obtained in other tests for the various materials used to make the unit component, — evaluating prototype, “low-emission” unit components during development. NOTE 1 All volatile carbonyls except formaldehyde can be analysed by ISO 16000-6:2011 incorporating informative Annex D. NOTE 2 The dynamic mode operation is described in the informative Annex D of this part of ISO 12219.
Interior air of road vehicles - Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Static chamber method
- ICS
- 13.040.20;43.020
- CCS
- T13
- 发布
- 2014-05
- 实施
이 표준은 KS R ISO 22241-1에 규정하는 NOx 환원제 AUS 32(요소수 수용액)의 품질 특성을 측정하기 위해 요구되는 시험방법에 대하여 규정한다.이 표준의 나머지 부분에서는 “NOx 환원제 AUS 32”를 줄여서 “AUS 32”로 약술한다.
Diesel engines — NOx reduction agent AUS 32 — Part 2: Test methods
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2013-12-05
- 实施
- 2013-12-05
Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Test methods and general performance requirements
- ICS
- 43.040.10
- CCS
- T13
- 发布
- 2013-09-30
- 实施
- 2013-09-30
This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Standard covers the performance requirements for protective covers for gasoline fuel tubing. The ultimate performance of the protective cover can be highly dependant on the interaction of the fuel line tubing and protective cover. Therefore, it is recommended that specific tubing and cover combinations be tested as an assembly to qualify to this document. This document is intended to provide guidance to the engine
Standard for Protective Covers for Gasoline Fuel Line Tubing
- ICS
- 23.040.01;43.060.40
- CCS
- T13
- 发布
- 2013-05-29
- 实施
- 2013-09-13
This International Standard specifies dimensions necessary for the mounting of fuel injectors in diesel (compression-ignition) engines. The location of the fuel inlet and leak-off connections, and the dimensions of the clamp are not defined since they vary according to the particular application. This International Standard applies to clamp-mounted injectors of types 7 and 28 made of an integral nozzle and nozzle holder design with a 9,5 mm (nominal) injector shank diameter.
Diesel engines.Clamp-mounted fuel injectors, types 7 and 28
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2013-05
- 实施
Diesel engines. Cleanliness assessment of fuel injection equipment
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2013-04-30
- 实施
- 2013-04-30
This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Recommended Practice defines the minimum design verification testing required to verify the suitability of in-tank mounted electric motor driven fuel pumps used for pumping gasoline or gasoline blend fuels.
Validation Testing of Electric Fuel Pumps for Gasoline Fuel injection systems
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2013-04-30
- 实施
- 2013-09-13
本标准规定了汽车用汽油滤清器总成(以下简称滤清器)性能试验方法,以便使滤清器的试验室性能试验结果具有可比性。本标准适用于额定体积流量在3. 5L/min(210L/h)以下的汽车用汽油机的滤清器。
Test methods of petrol filter for automobiles
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了汽车燃油滤清器纸质滤芯的尺寸规范及标记。本标准适用于汽车燃油滤清器可更换纸质滤芯。
Dimensions of fuel filter paper element for vehicles
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了汽车柴油机燃油预滤器总成的术语和定义、要求、试验方法、检验规则、标志、包装、运输和储存。本标准适用于体积流量为15L/min(900L/h)以下的汽车柴油机燃油预滤器总成(以下简称总成)。
Specifications of fuel prefilter assembly for automotive diesels
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了汽车用空气滤清器纸质滤芯的技术要求、试验方法和检验规则以及标志、包装、运输和储存。本标准适用于体积流量为3000m/h以下的汽车用(轿车用的除外)空气滤清器纸质滤芯(以下简称滤芯)。工程机械、农林机械、船舶和固定动力用的滤芯也可参照使用。
Specifications of paper element for automobile air filters
- ICS
- 43.060.20
- CCS
- T13
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了汽车电喷汽油机汽油滤清器总成的技术要求、试验方法和检验规则以及标志、包装、运输和储存。本标准适用于体积流量为3.5L/min(210L/h)以下的汽车电喷汽油机汽油滤清器总成(以下简称总成),包括旋装式和其他形式的总成。
Specifications of petrol filter assembly for automotive engines with electronically controlled petrol injection system
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2013-04-25
- 实施
- 2013-09-01
This SAE standard includes complete general and dimensional specifications for those types of filler and drain plugs (shown in figures 1-7 and Tables 1 to 3) having straight threads which are commonly used with gaskets or seals in automotive and related industrial applications.
Automotive Straight Thread Filler and Drain Plugs
- ICS
- 01.060;23.040.01;43.040.01
- CCS
- T13
- 发布
- 2013-03-27
- 实施
- 2013-03-29
Diesel engines - 60 degree female cones for high-pressure fuel injection components
- ICS
- 43.060.40
- CCS
- T13
- 发布
- 2013-03
- 实施
