T38 照明与信号设备 标准查询与下载

GB 5920-1999 汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能

本标准规定了汽车前位灯、后位灯、示廓灯和制动灯的配光性能、试验方法和检验规则。 本标准适用于M、N和O类汽车及挂车使用的各种类型的前位灯、后位灯、示廓灯和制动灯。

Photometric characteristics of front and Rear position lamps,end-outline marker lamps and stop lamps for motor vehicles and and their trailers

GB 17509-1998 汽车和挂车转向信号灯配光性能

本标准规定了汽车和挂车转向信号灯（以下简称为装置）的配光性能要求、配光性能和光色的测量方法以及检验规定。 本标准适用于汽车和挂车使用的转向信号灯。

Photometric characteristics of direction indicators for motor vehicles and their trailers

GB 4785-1998 汽车及挂车外部照明和信号装置的安装规定

本标准规定了汽车及挂车的外部照明和信号装置安装的技术要求、试验方法和检验规则等。 本标准适用于M、N和O类汽车及挂车。

Prescription for installation of the external lighting and light signalliug devices for motor vehicles and their trailers

GB 11554-1998 汽车及挂车后雾灯配光性能

本标准规定了汽车后雾灯的技术要求、试验方法和检验规则等。 本标准适用于M、N和O类汽车及挂车使用的各种类型的后雾灯。

Photometric characteristics of rear fog lamp for motor vehicles and their trailers

GB 5948-1998 摩托车白炽丝光源前照灯配光性能

本标准规定了摩托车白炽丝光源前照灯（以下简称前照灯）的技术要求、试验方法和检验规则等。 本标准适用于L3、L4和L5类摩托车（不包括轻便摩托车）使用的各种类型的前照灯。

Photometric characteristics of motocycle headlamps epuipped with filament light sources

GB 17510-1998 摩托车光信号装置配光性能

本标准规定了摩托车和轻便摩托车用前位灯、后位灯、制动灯、转向信号灯和后牌照灯的配光性能要求、配光性能和光色的测量方法以及检验规定。 本标准适用于摩托车和轻便摩托车用前位灯、后位灯、制动灯、转向信号灯和后牌照灯。 在本标准中，上述各种信号灯也称为装置。

Photometric characteristics of light-signalling devices for motorcycles

GB 11564-1998 机动车回复反射器

本标准规定了机动车回复反射器的技术要求、试验方法和检验规则等。 本标准适用于摩托车、汽车和挂车使用的各种类型的回复反射器。

Retro refletor for motor vehicles

GB/T 17348-1998 道路车辆 会车光束倾斜角随载荷变化的测量

本标准规定了道路车辆由于载荷改变姿态而引起的会车光束倾斜角相对初始倾斜角变化的测量方法。在车辆的型式鉴定试验时，特别宜用此测量方法。 车辆的载荷条件在附录A（标准的附录）中予以规定。除法规有不同载荷条件外，都可参照执行。附录B（标准的附录）对前大灯作了分类，并根据分类给出了相适用的测量方法的实例。附录C（标准的附录）给出了确定传统灯光明暗截止线某一点位置的光度测量方法。这是对附录B中测量方法实例之一的补充。 本标准适用于ISO 3833所规定的机动车辆。

Motor vehicle--Measurement of variations in dipped beam headlamp angle as a tunction of load

GB 15235-1994 汽车倒车灯配光性能

本标准规定了汽车倒车灯的配光性能、试验方法和检验规则。 本标准适用于M、N和O类汽车使用的各种类型的倒车灯。

Photometric characteristics of reversing lamps for motor vehicles and their trailers

GB 4660-1994 汽车前雾灯配光性能

本标准规定了汽车前雾灯配光性能、试验方法和检验规则。 本标准适用于M、N类汽车使用的各种类型的前雾灯。

Photometric characteristics of front fog lamps for motor vehicles

GB 4599-1994 汽车前照灯配光性能

本标准规定了汽车前照灯配光性能、试验方法和检验规则。 本标准适用于M、N类汽车使用的各种类型的前照灯。

Photometric characteristics of headlamps for motor vehicles

GB/T 10485-1989 汽车及挂车外部照明和信号装置基本环境试验

本标准规定了汽车及挂车外部照明和信号装置的基本环境试验项目、条件、方法和检验规则。 本标准适用于汽车及挂车外部使用的除反射器外各种类型照明和信号装置（以下简称汽车灯或灯）。

Basic environmental testing of lighting and signalling devices for motor vehicles and their trailers

GB/T 7360-1987 汽车与挂车照明和信号装置的工作电压及其测量

本标准规定了汽车与挂车外部照明和信号装置的工作电压范围，还规定了测量这些工作电压的方法。 本标准适用于以内燃机为动力并且装备铅酸蓄电池的汽车与挂车。

Working voltages and their measurement for lights and lighting signal devices fitted to motor vehicles and towed vehicles

GB/T 4659-1984 汽车前照灯类型、主要尺寸和连接尺寸

本标准规定了前照灯类型，圆形、矩形前照灯主要尺寸和连接尺寸规格及其一般要求，适用于汽车。

Type,main size and mounted dimension of headlamps for motor vehicle

QC/T 1124-2019 汽车自适应前照明系统调光装置耐久性试验方法

Durability test method for dimming device of automotive adaptive front lighting system

DIN EN IEC 60809:2018 道路车辆用灯.尺寸、电气和照明要求(IEC 60809-2014+A1-2017+A2-2017); 德文版本EN 60809-2015+A1-2017+EN IEC 60809-2015/A2-2018

This consolidated version of DIN EN 60809 includes amendment A1 of IEC 60809, Edition 3. This amendment adds to DIN EN 60809 requirements for non-replaceable filament lamps and for requirements for LED-light sources.

Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:2014 + A1:2017 + A2:2017); German version EN 60809:2015 + A1:2017 + EN IEC 60809:2015/A2:2018

DIN 14642:2018 车辆用带安装设备的防爆型便携式探照灯

This standard covers explosion-proof portable searchlights with mounting equipment for vehicles and specifies its requirements. This standard covers additionally provisions for explosion-proved portable searchlights and the relevant mounting equipment for special use.

Portable searchlight with mounting equipment for vehicles, explosion-proved

DIN EN 60809:2018 道路车辆用灯.尺寸,电气和照明要求(IEC 60809-2014+A1-2017);德文版本EN 60809-2015+A1-2017

This consolidated version of DIN EN 60809 includes Amendment A1 of IEC 60809, Edition 3. This amendment adds requirements for non-replaceable filament lamps and for requirements for LED-light sources.

Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:2014 + A1:2017); German version EN 60809:2015 + A1:2017

IEC 60809:2017 道路车辆用灯.尺寸、电气和照明要求

This International Standard is applicable to replaceable and standardised lamps (filament lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. In some applications, these lamps may be installed as non- replaceable. This standard is especially applicable to those lamps which are the subject of legislation. In particular, it includes the lamps contained in Regulations No. 37, No. 99, No. 128 and its series of amendments of the Geneva Agreement of 20 March 1958 of the United Nations Economic Commission for Europe (UNECE). However, the standard may be used for other lamps falling under the scope of this standard, as well as lamps which are subject of legislation but not contained in Regulations No. 37, No. 99 and No. 128, e. g. the non-replaceable (filament) lamps and LED modules. For replaceable and standardised lamps, the standard specifies the technical requirements with methods of tests and basic interchangeability (dimensional, electrical and luminous) for lamps of normal production and for standard (étalon) lamps. For most of the requirements given in this standard, reference is made to the "relevant lamp data sheet". For all lamps listed in Clause 8, data sheets are contained in this standard or included by reference. For other lamps, the relevant data are supplied by the lamp manufacturer or responsible vendor. It could be based on national legislation. Other requirements to replaceable and standardised lamps such as lamp life, luminous flux maintenance, torsion strength and resistance to vibration and shock are specified in IEC 60810. Such requirements to non-replaceable lamps are given in this standard. For some test methods, reference is made to IEC 60810. Road vehicle lamps for supplementary purposes which are not the subject of legislation are specified in IEC 60983. In countries which legislate for approval, for example under the terms of the aforementioned UN Regulations, it is suggested

Lamps for road vehicles - Dimensional, electrical and luminous requirements

IEC 60810:2017 道路车辆用灯、光源和LED封装.性能要求

This document is applicable to filament lamps, discharge lamps, LED light sources and LED packages to be used in road vehicles, i.e. in headlamps, fog-lamps, signalling lamps and interior lighting. It is especially applicable to those lamps and light sources which are listed in IEC 60809. It specifies requirements and test methods for the measurement of performance charac- teristics such as lamp life, luminous flux maintenance, torsion strength, glass bulb strength and resistance to vibration and shock. Moreover, information on temperature limits, maximum lamp outlines and maximum tolerable voltage surges is given as guidance for lighting and electrical equipment design. For some of the requirements given in this document, reference is made to data given in tables. For lamps not listed in such tables, the relevant data are supplied by the lamp manufacturer or responsible vendor. The performance requirements are additional to the basic requirements specified in IEC 60809. They are, however, not intended to be used by authorities for legal type-approval purposes. NOTE 1 In the various vocabularies and standards, different terms are used for "incandescent lamp" (IEC 60050-845:1987, 845-07-04) and "discharge lamp" (IEC 60050-845:1987, 845-07-17). In this document, "filament lamp" and "discharge lamp" are used. However, where only "lamp" is written both types are meant, unless the context clearly shows that it applies to one type only. NOTE 2 This document does not apply to luminaires. NOTE 3 In this document, the term LED light source is used, in other standards the term LED lamps can be used to describe similar products.

Lamps, light sources and led packages for road vehicles - Performance requirements