T40 汽车综合 标准查询与下载

KS R ISO 15005:2009 道路车辆.运输信息和控制系统的人类工效学特性.对话管理原则和一致性程序

이 표준은 차량이 움직이고 있을 때 도로 차량에 탑승한 운전자와 차량의 교통 정보와 제어

Road vehicles-Ergonomic aspects of transport information and control systems-Dialogue management principles and compliance procedures

SAE J551/15-2009 抗静电放电(ESD)电磁类车辆

This SAE Standard specifies the ESD test methods and procedures necessary to evaluate electronic modules intendedfor vehicle use. It describes test procedures for evaluating electronic modules in complete vehicles.A procedure for verifying the simulator that is used to generate the electrostatic discharges is given in Appendix A.Functional status classifications for immunity to ESD are given in Appendix B.

Vehicle Electromagnetic Immunity Electrostatic Discharge (ESD)

KS R ISO 1728:2008 道路车辆.汽车和挂车之间的气压制动连接装置.互换性

이 표준은 자동차와 피견인 차량 사이의 공기식 제동 장치의 연결 장치의 호환성을 보증하는

Road vehicles－Pneumatic braking connections between motor vehicles and towed vehicles－Interchangeability

KS R ISO 14512:2008 客用车.具有裂口摩擦系数的正向前方地面制动系统.开环试验方法

이 표준은 마찰 계수가 서로 다른 노면에서 직진 제동하는 차량의 반응을 평가하는 개방 루프

Passenger cars－Straight-ahead braking on surfaces with split coefficient of friction－Open-loop test method

TH 42043-2008 汽车和设备.EC,ECE和国家认可方案的应用指南

Motor Vehicles and Equipment - An international guide to the application of EC, ECE and national approval schemes

DIN 70020-3:2008 道路车辆.汽车工程.第3部分:试验条件、最大速度、加速度和弹性、质量、术语等方面

Road vehicles - Automotive engineering - Part 3: Testing conditions, maximum speed, acceleration and elasticity, mass, terms, miscellaneous

QC/T 799-2008 伸缩式皮带输送车

本标准规定了伸缩式皮带输送车的术语和定义、要求、试验方法、检验规则、产品标牌、使用说明书、随车文件及包装、运输与储存。 本标准适用于采用已定型的汽车二类底盘改装的用于输送各类混凝土及其他散状物料的带多节臂架的伸缩式皮带输送车。

Telescopic belt truck conveyer

KS R ISO 2416:2007 客车.载荷分布

이 규격은 승용차에 대하여 운반할 수 있는 질량의 분포를 규정하고, 다음에 대하여 상술한다

Passenger cars-Mass distribution

KS R ISO 14722:2007 机动脚踏两用车及使用者运动学.词汇

a) 이 규격은 모페드와 운전자의 움직임, 운동학, 모델링과 관련된 용어, 기호 및 규칙에

Moped and moped-rider kinematics-Vocabulary

GOST R 41.13-2007 有关刹车类别为M、N和O的制动车辆的统一规定

Uniform provisions concerning the vehicles of categories M, N and O with regard to braking

SANS 10267:2006 汽车型号的批准

Covers general provisions for the homologation of motor vehicle models of categories M, N and O, including incomplete motor vehicles, as covered by compulsory vehicle specifications promulgated under the Standards Act, 1993 (Act No. 29 of 1993).

Homologation of motor vehicle models

SN/T 1688.4-2006 进出口机动车辆检验规程 第4部分:汽车产品

本部分规定了进出口汽车产品的技术要求、检验方法、抽样和合格判定。 本部分适用于对列入《出入境检验检疫机构实施检验检疫的进出口商品目录》内的汽车产品的检验。对进出口汽车列车产品的检验可参照本部分使用。 出口汽车产品合同对技术要求有规定的，按合同规定检验；合同无规定或规定或规定不明确的，按本部分检验。

Rules for the inspection of power-driven vehicles for import and export- Part 4:Motor vehicle products

QC/T 760-2006 四轮全地形车通用技术条件

本标准规定了四轮全地形车的有关术语和定义、技术要求、试验方法、检验规则、标志、包装、运输与储存的要求。 本标准适用于四轮全地形车。

General specincations for four wheeled all -terrain vehicles

ISO 20176:2006 道路车辆.H点机械(HPM II).H点测定的规范程序

This International Standard provides the specifications and procedures for using the H-point machine [HPM1) ] to audit vehicle seating positions. The HPM is a physical tool used to establish key reference points and measurements in a vehicle (see Figure 1 and Annex A). The H-point design tool (HPD) is a simplified CAD2) version of the HPM, which can be used in conjunction with the HPM to take the optional measurements specified in this document, or used independently during product design (see Annex D) . These H-point devices provide a method for reliable layout and measurement of occupant seating compartments and/or seats. This document specifies the procedures for using the H-point machine (HPM) to audit (verify) key reference points and measurements in a vehicle. The devices are intended for application at designated seating positions. They are not to be construed as tools that measure or indicate occupant capabilities or comfort. They are not intended for use in defining or assessing temporary seating, such as folding jump seats.

Road vehicles - H-point machine (HPM II) - Specifications and procedure for H-point determination

KS R ISO 16333:2005 重型商用车辆与公共汽车.稳态倾翻阈.倾斜台试验方法

이 규격은 정상 상태에서 대형 상용 차량 및 버스의 롤 전복 한계를 추정하기 위한 틸트 테

Heavy commercial vehicles and buses-Steady-staterollover threshold-Tilt-table test method

KS R ISO 14794:2005 重型商用车辆与公共汽车.转弯制动.开环试验方法

이 규격은 다음에 열거된 장치를 사용하여 제동을 완성했을 때 대형 차량 또는 대형 연결 차

Heavy commercial vehicles and buses-Braking in a turn-Open-loop test methods

KS R ISO 14793:2005 公路车辆.重型商用车辆与公共汽车.横向瞬时反应试验方法

이 기술 보고서는 중량 상용 차량, 중량 상용 연결 차량, KS R ISO 3833에 정의

Road vehicles-Heavy commercial vehicles and buses-Lateral transient response test methods

KS R ISO 17288-2:2005 乘用车.自由控制性能.第2部分:转向脉冲开环试验方法

이 규격은 KS R ISO 3833에서 정의된 것처럼, 똑바로 정상 상태로부터 출발하고,

Passenger cars-Free-steer behaviour-Part 2:Steering-pulse open-loop test method

KS R ISO 14792:2005 道路车辆.重型商用车辆和公共汽车.稳态循环试验

이 기술 보고서는 차량 동역학 및 로드 홀딩 성질을 구성하는 요소의 하나인 중량 차량의 정

Road vehicles-Heavy commercial vehicles and buses-Steady-state circular tests

KS R ISO 1724:2004 道路车辆.牵引车和挂车之间电气连接用连接器.带12V标称电源电压的车辆用12N(标准)型7极连接器

이 규격은 12V용 7폴 일반 커넥터(12 N)에 대한 치수 특성 및 구체적인 요구 사

Road vehicles－Connectors for the electrical connection of towing and towed vehicles－7 pole connector type 12N(normal)for vehicles with 12V nominal supply voltage