T47 新能源汽车及其他类型汽车 标准查询与下载

QC/T 755-2006 液化天然气(LNG)汽车专用装置技术条件

本标准规定了使用液化天然气（LNG）为燃料的汽车专用装置的技术条件。 本标准适用于液化天然气额定工作压力不大于1.6MPa的液化天然气单一燃料汽车。

Technology requirements of special equipment for LNG vehicle

KS B 8200-2006 太阳能集热器性能检测方法

이 규격은 집열 매체로서 액체를 강제 순환시켜 태양열을 현열로서 집열하는 평판형, 진공 유

Test method of thermal performance for solar collectors

CSA NGV1-2006-2006 压缩天然气车辆(NGV)燃料连接装置.第2版.CSA/ANSI NGV1-2006

Compressed Natural Gas Vehicle (NGV) Fueling Connection Devices Second Edition; CSA/ANSI NGV1-2006

Compressed Natural Gas Vehicle (NGV) Fueling Connection Devices Second Edition

HJ/T 182-2005 环境标志产品技术要求 轻型汽车

本标准规定了低污染型轻型汽车类环境标志产品基本要求、技术内容及其检验方法。 本标准适用于以点燃式发动机或压燃式发动机为动力，最大设计车速大于或等于50 km/h 的轻型汽车的环境标志产品认证。

Environmental Labeling Products standard–Light-duty Vehicles

GM 9986153-2005 工厂用自动传动液

Foljande justeringar har gjorts sedan foregaende utgava: Following changes have been done compared to previous issue: Ytvikt, tjocklek, garnnummer, varp, tradtathet for stolpar och maskor, draghallfasthet och brottojning har andrats. Weight per unit a

Factory Fill Automatic Transmission Fluid Revision A

KS B 8204-2004 太阳能蓄热罐

이 규격은 대기압 상태에서 비등점을 초과하지 않는 액체를 수두압 98 kPa 이하에서

Solar storage tanks

KS B 8201-2004 太阳能蓄热罐性能检测方法

이 규격은 축열 매체로 액체를 사용하고, 태양열 시스템을 이용하여 열에너지를 현열(顯熱

Test method of thermal performance for solar storage tanks

GM 9982276-2004 隔热保护膜

Freigabemuster, fur die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung und Konstruktion genehmigt sein

Masking Film, Thermoforming Revision A

GM2211M-2004 隔声板组件

Freigabemuster, fur die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung und Konstruktion genehmigt sein

Sound Barrier Assembly Laminates Revision B

GM9909P-2004 海豹皮制品的耐磨性

All test pieces shall be manufactured by injection moulding.

Seals Abrasion Resistance Revision B

SAE J1779-2003 针对海事车辆的船舶系统和设备液压系统设计标准

The marine environment differs greatly from other environments in which hydraulics are used. This Recommended Practice provides hydraulic design considerations and criteria for the marine environment and is applicable to commercial vessels, military ships, and submersible vehicles. This document may be used for manned and un-manned vehicles.

Ship Systems and Equipment - Hydraulic System Design Criteria for Marine Vehicles

QC/T 247-2002 液化石油气汽车专用装置技术条件

本标准规定了液化石油气汽车专用装置的通用技术条件。 　　本标准适用于使用符合SY 7548要求的汽车用液化石油气、额定工作压力为2.2MPa的专用装置。

Specifications for special equipment for liquefied petroleum gas vehicles

QC/T 697-2002 液化石油气乘用车技术条件

本标准规定了液化石油气单燃料和汽油/液化石油气两用燃料乘用车(越野乘用车及专用乘用车出外)的技术要求、试验方法、检验规则、标志、运输和贮存等。 　　本标准适用于装用公称工作压力为2.2MPa液化石油气钢瓶的液化石油气单燃料和汽油/液化石油气两用燃料乘用车。

Technical conditions for liquefied petroleum gas passenger vehicles

QC/T 245-2002 压缩天然气汽车专用装置技术条件

本标准规定了压缩天然气汽车专用装置的定义和技术要求。 　　本标准适用于使用符合GB 18047要求的汽车用压缩天然气、额定工作压力为20MPa的专用装置。

Technical specifications for special equipment for compressed natural gas vehicles

SAE J2645-2003 液化天然气车辆计量和配气系统

This SAE Recommended Practice applies to Liquefied Natural Gas Vehicle Fuel. The purpose of this document is to provide information on issues that are important to consider regarding LNG metering and dispensing systems.

Liquefied Natural Gas (LNG) Vehicle Metering and Dispensing Systems

GM2217M-2003 隔音材料.发动机舱

Unbeschadet etwaiger durch den Abnenmer erfolgenden Stichprobenprüfungen tragt der Lieferant die Verantwortung dafür, do6 die gelieferte Ware die Opel - Zeichnungsvorschriften erfüllt. Mustern sowie Teilen einer ersten Serienlieferung ist unaufgefordert

Acoustical Barrier Materials - Engine Compartment Revision B

GM 9984235-2003 高烘烤轻质钢丝夹胶粘剂.密封粘合剂

Freigabemuster, fur die diese Vorschrift zutrifft, müssen nach dieser Vorschrift geprüft werden und von der Produktentwicklung und Konstruktion genehmigt sein

Sealer/Adhesive - High Bake, Light Weight, Wire Clip Adhesive Revision A

DIN EN 1986-2:2003 电动道路车辆.能量性能测量.第2部分:热电混合车辆

The document aims at defining the range in pure electric driving mode and the consumption measurements for a thermal electric hybrid road vehicle from M1, N1, or M2 category, and for tricycles and quadricycles from the motorcycle types. This standard applies to the above mentioned vehicles whose range and consumption can be tested following the provisions already laid down for conventional vehicles (i.e. internal combustion e ngine vehicle) from the equivalent categories.#,,#

Electrically propelled road vehicles - Measurement of energy performance - Part 2: ThermaL electric hybrid vehicles; German version EN 1986-2:2001

DIN EN 13447:2003 电动道路车辆.术语

The document gives definitions used in European standards for electrically propelled road vehicles. It is not intented to give definitions of all terms concerning these vehicles, but to permit a good understanding of the content of standards dealing with electrically propelled road vehicles.#,,#

Electrically propelled road vehicles - Terminology; German version EN 13447:2001

GM 9984273-2003 焊透,500%膨胀率,可泵送密封剂

Stoff zum Überziehen von Sitzen und Rückenlehnen. Fabric for covering of seats and seat backs.

Sealer - Pumpable, 500% Expandable, Weld-Through Revision B