T47 新能源汽车及其他类型汽车 标准查询与下载

SAE J2579-2009 燃料电池和其他氢型车辆中燃料系统用技术信息报告

The purpose of this document is to define design, construction, operational, and maintenance requirements for hydrogenfuel storage and handling systems in on-road vehicles.Performance-based requirements for verification of design prototype and production hydrogen storage and handlingsystems are also defined in this document. Complementary test protocols (for use in type approval or self-certification) toqualify designs (and/or production) as meeting the specified performance requirements are described.Crashworthiness of hydrogen storage and handling systems is beyond the scope of this document. SAE J2578 includesrequirements relating to crashworthiness and vehicle integration for fuel cell vehicles. It defines recommended practicesrelated to the integration of hydrogen storage and handling systems, fuel cell system, and electrical systems into theoverall Fuel Cell Vehicle.

Technical Information Report for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles

KS B 8202-2008 住宅用太阳能热水器

이 표준은 주로 주택의 급탕에 사용하는 태양열 온수기(이하 온수기라 한다.)에 대하여 규정

Solar hot water heater for dwellings

SAE J2572-2008 以压缩气体氢作燃料的燃料电池和混合燃料电池车辆燃油消耗量范围测量的推荐操作规程

This SAE Recommended Practice establishes uniform procedures for testing fuel cell and hybrid fuel cell electric vehicles, excluding low speed vehicles, designed primarily for operation on the public streets, roads and highways. The procedure addresses those vehicles under test using compressed hydrogen gas supplied by an off-board source or stored and supplied as a compressed gas onboard. This practice provides standard tests that will allow for determination of fuel consumption and range based on the US Federal Emission Test Procedures, using the Urban Dynamometer Driving Schedule (UDDS) and the Highway Fuel Economy Driving Schedule (HFEDS). Chassis dynamometer test procedures are specified in this document to eliminate the test-to-test variations inherent with track testing, and to adhere to standard industry practice for fuel consumption and range testing. Communication between vehicle manufacturer and the governing authority is essential when starting official manufacturer in-house and official government confirmatory testing that incorporates this practice.

Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fuelled by Compressed Gaseous Hydrogen

ISO/TR 11954:2008 燃料电池道路车辆.最高速度测量

Fuel cell road vehicles - Maximum speed measurement

SAE J2343-2008 液化石油气(LNG)中型和重型驱动车辆用推荐实施规程

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of LNG powered medium, heavy-duty vehicles and all LNG vehicles used for public transit or commercial applications.1.1 PurposeThe purpose of this document is to establish a uniform practice for construction, operation, and maintenance of LNG powered vehicles and is subject to change to keep pace with experience and technical advances. The revised FailureModes and Effects Analysis (FMEA) which influences this document is a separate document, available in part as an informative appendix (Appendix B).

Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles

CENELEC CLC/TS 50457-2-2008 电动汽车的传导充电.第2部分:车外充电器和电动车辆之间的通信协议

This Technical Specification applies to the communication data link between external charger and electric road vehicle for the charging procedure, using the most common communication link. This Part 2 applies to communication data link between the off-board charging system with direct current and electric road vehicles. The aspects covered are the physical layer, the data link layer and the communication applicative layer. This Technical Specification does not cover communication between dedicated off-board charger and their electric vehicle. Annex A gives an example of normal operation.

Conductive charging for electric vehicles - Part 2: Communication protocol between off-board charger and electric vehicle

CENELEC CLC/TS 50457-1-2008 电动汽车的传导充电.第1部分:直流（D.C.）充电站

This Technical Specification, together with EN 61851-1, gives the requirements for d.c. electric vehicle charging stations for conductive connection to the vehicle, with an a.c. supply voltage per IEC 60038, up to 690 V. This Technical Specification does not cover all safety aspects related to maintenance. This Technical Specification is not applicable to dedicated off-board charger.

Conductive charging for electric vehicles — Part 1: D.C. charging station

CGA G-1.6-2008 机动乙炔拖车系统用推荐实施规程

This publication presents safe practices recommended for the design, construction, and operation of mobile acetylene trailer systems (MATS) containing acetylene cylinders manifolded for the purposes of charging, transporting, and discharging large quantities of acetylene. It also covers ground-mounted auxiliary equipment used in conjunction with the MATS such as piping, regulators, flash arrestors, and meters.

Recommended practices for mobile acetylene trailer systems

SAE J2343-2007 液化天然气(LNG)中型和重型动力汽车的推荐实施规程

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of LNG powered heavy-duty vehicles and all LNG vehicles used for public transit or commercial applications.. The purpose of this document is to establish a uniform practice for construction, operation, and maintenance of LNG powered vehicles and is subject to change to keep pace with experience and technical advances. The revised Failure Modes and Effect Analysis (FMEA) which influences this document is a separate document, available in part as an informative appendix.

Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles

CSA D250-07-2007 校车 第8版

Autobus Scolaires Huitième Edition

School Buses Eighth Edition

CSA/AM ANSI/CSA NGV2-2007 天燃气车辆的容器

Natural Gas Vehicle Containers

Natural Gas Vehicle Containers

SAE J2758-2007 混合电车的可再充电储能系统中最大有效功率的测定

This document describes a test procedure for rating peak power of the Rechargeable Energy Storage System (RESS) used in a combustion engine Hybrid Electric Vehicle (HEV). Other types of vehicles with non fossil fuel primary engines, such as fuel cells, are not intended to use this test procedure. The purpose of this document is to provide a test procedure to determine RESS peak power so that a vehicle's ratio of RESS peak power rating to the sum of the Internal Combustion Engine power rating and the RESS peak power rating can be established. Because of the vehicle-specific nature of the RESS control and environment, this test is designed to calculate the RESS peak power for a specific vehicle. As a result, the same RESS used in a different vehicle must be retested to determine its peak power rating in the new HEV environment.

Determination of the Maximum Available Power from a Rechargeable Energy Storage System on a Hybrid Electric Vehicle

CSA/AM ANSI/IAS PRD 1B-2007 车辆压缩天然气(NGV)燃料容器卸压设备

Pressure Relief Devices for Compressed Natural Gas Vehicle (NGV) Fuel Containers

Pressure Relief Devices for Compressed Natural Gas Vehicle (NGV) Fuel Containers

SAE J2641-2007 雪地汽车的固定噪声测试、程序和实施问题

This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment and promote uniform testing. The purpose of this document is to identify problems in the administration and in safety of infield, snowmobile stationary sound testing, as described in SAE J2567.

Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues

SAE J2292-2006 非公路作业机用骨盆部/上身(类型2)驾驶员控制装置

This SAE Information Report provides performance and test requirements for combination pelvic/upper torso operator restraint systems provided for off-road self-propelled work machines. This document applies to 3-point and 4-point operator restraint systems (Type 2 and Type 2A) for off-road, self-propelled work machines fitted with ROPS.

Combination Pelvic/Upper Torso (Type 2) Operator Restraint Systems for Off-Road Work Machines

SANS 20067:2006 I．使用液化石油气推进装置的机动车的特殊设备的认证；II．装有使用液化石油气推进器特殊装置的机动车的认证的统一规定

Covers the provisions for the specific equipment of motor vehicles that use liquefied petroleum gases in their propulsion system, and provisions for the installation of such equipment.

Uniform provisions concerning I. approval of specific equipment of motor vehicles using liquefied petroleum gases in their propulsion system; II. approval of a vehicle fitted with specific equipment for the use of liquefied petroleum gases in its propulsi

SAE J1793-2006 自推式扫路机和洗刷罐和储斗容量

This SAE Standard applies to self-propelled sweepers and scrubbers as defined in SAE J2130. The purpose of the document is to provide uniform methods for determining the capacity of debris hoppers and fluid tanks used on self-propelled sweepers and scrubbers. The methods declared result in realistic useable volume measures.

Self-Propelled Sweepers and Scrubbers Tank and Hopper Capacity Rating

QC/T 755-2006 液化天然气(LNG)汽车专用装置技术条件

本标准规定了使用液化天然气（LNG）为燃料的汽车专用装置的技术条件。 本标准适用于液化天然气额定工作压力不大于1.6MPa的液化天然气单一燃料汽车。

Technology requirements of special equipment for LNG vehicle

KS B 8200-2006 太阳能集热器性能检测方法

이 규격은 집열 매체로서 액체를 강제 순환시켜 태양열을 현열로서 집열하는 평판형, 진공 유

Test method of thermal performance for solar collectors

CSA NGV1-2006-2006 压缩天然气车辆(NGV)燃料连接装置.第2版.CSA/ANSI NGV1-2006

Compressed Natural Gas Vehicle (NGV) Fueling Connection Devices Second Edition; CSA/ANSI NGV1-2006

Compressed Natural Gas Vehicle (NGV) Fueling Connection Devices Second Edition