T60 拖拉机综合 标准查询与下载
共找到 249 条与 拖拉机综合 相关的标准，共 17 页
Engineering Geophysical Specifications
- ICS
- 91.010.01
- CCS
- T60
- 发布
- 2014-03-20
- 实施
- 2014-04-20
Technical conditions for tractors with bent steering wheel
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2014-03-20
- 实施
- 2014-04-20
Agricultural tractors. Requirements, test procedures and acceptance criteria for the operator’s field of vision. Field of vision to the side and to the rear
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2014-02-28
- 实施
- 2014-02-28
本标准规定了单缸直联传动轮式拖拉机的技术要求、试验方法、检验规则、交货、标志、运输和贮存。本标准适用于以功率不大于22.06 kW单缸柴油机为动力的直联传动轮式拖拉机(以下简称拖拉机)。
Single casing direct linking transmission wheeled tractors.General requirement
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了手扶拖拉机水田铁轮的术语和定义、技术要求、试验方法、检验规则及标志、包装、运输和贮存。本标准适用于18 kW以下手扶拖拉机水田铁轮(以下简称水田铁轮)。
Specifications of paddy field-wheel for walking tractor
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了拖拉机的功率分类及功率型谱。本标准适用于拖拉机。
Tractor.Power category and series
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了不大于13 kW (18马力)直联传动手扶拖拉机的技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于直联传动手扶拖拉机(以下简称拖拉机)。
Direct-drive walking tractors.Specifications
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2013-12-31
- 实施
- 2014-07-01
This part of ISO 5721 specifies the requirements, test procedures and acceptance criteria for the field of vision to the front of the operator of agricultural tractors.
Agricultural tractors - Requirements, test procedures and acceptance criteria for the operator's field of vision - Part 1: Field of vision to the front
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2013-07-01
- 实施
Agricultural wheel tractors - Front-mounted equipment - Part 1: Power take-off and three-point linkage
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2013
- 实施
Agricultural wheeled tractors - Rear-mounted three-point linkage - Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2013
- 实施
이 표준은 농업에 사용되는 장착식, 반장착식 및 견인식 기계와 자주식 승용기계의 설계와 제
Agricultural machinery-Safety-Part 1:General requirements
- ICS
- 65.060.01
- CCS
- T60
- 发布
- 2012-12-28
- 实施
- 2012-12-28
本标准规定了轮式拖拉机能效限值要求、试验方法、能效检验规则、能效等级评价方法、能效等级标注。 本标准适用于农业轮式拖拉机（以下简称拖拉机）。农用柴油机和其他以柴油机为动力的农用机械可参照执行。
Level evaluation of energy efficiency for wheeled trators
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2012-12-07
- 实施
- 2013-03-01
本标准规定了手扶拖拉机整机或系统总成修理后的质量要求、检验方法、验收与交付要求。 本标准适用于安装柴油机的手扶拖拉机（以下简称拖拉机）整机或系统总成的修理质量评定。
Repairing quality for walking tractors
- ICS
- 65.060.01
- CCS
- T60
- 发布
- 2012-12-07
- 实施
- 2013-03-01
本标准规定了轮式拖拉机号牌座的形状、尺寸和安装要求。 本标准适用于轮式拖拉机、拖拉机运输机组、手扶拖拉机和履带拖拉机。
Technical specifications for license plate holder setting on tractors
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2012-12-07
- 实施
- 2013-03-01
Establish the test and performance requirements of a roll-over protective structure, ROPS, designed for compact utility tractors to minimize the frequency and severity of crushing injury to the operator resulting from accidental tractor upset.
Roll-Over Protective Structures (ROPS) for Compact Utility Tractors
- ICS
- 43.080.10
- CCS
- T60
- 发布
- 2012-01-01
- 实施
Specifies general safety requirements & their verification for the design and construction of standard tractors used in agriculture & forestry. Tractors have at least two axles for pneumatic-tyred wheels, with the smallest track gauge of the rear axle exceeding 1 150 mm, or tracks instead of wheels, with their unballasted tractor mass being greater than 600 kg. Specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer, as well as technical means for improving the degree of personal safety of the operator and others involved in a tractor's normal operation, maintenance and use.
Tractors for agriculture and forestry - Safety - Part 1: Standard tractors
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2012
- 实施
Specifies the requirements for pelvic restraint (seat) belt assemblies intended to be used by the operators of agricultural tractors and self-propelled machinery. NOTE Seat belt assemblies that meet the requirements of UNECE R16:2000, Clause 6, but excluding 6.4 of that regulation, or seat belt assemblies complying with the requirements of SAE J386 are deemed to comply with the requirements of this part of ISO 3776.
Tractors and machinery for agriculture - Seat belts - Part 3: Requirements for assemblies
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2012
- 实施
Specifies the location, relative position and threaded hole dimensions of the anchorages for pelvic restraint (seat) belt assemblies intended to be used by the operators of gricultural tractors and self-propelled machinery.
Tractors and machinery for agriculture - Seat belts - Part 1: Anchorage location requirements
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2012
- 实施
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Operator's manual - Content and format
- ICS
- 65.060.01
- CCS
- T60
- 发布
- 2012
- 实施
Specifies the design dimensions of agricultural tractors having a minimum track width exceeding 1150 mm in respect of: a) the minimum dimensions of their access doorways, b) the number, location and minimum dimensions of their emergency exits, and c) their minimum internal clearance dimensions.
Agricultural tractors - Operator's workplace, access and exit - Dimensions
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2012
- 实施
