T60 拖拉机综合 标准查询与下载
共找到 249 条与 拖拉机综合 相关的标准，共 17 页
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Operator's manual - Content and format
- ICS
- 65.060.01
- CCS
- T60
- 发布
- 2012
- 实施
ISO 4254-1과 함께 사용되어야 하는 이 표준은 농업에 사용되는 장착식, 반장착식 및
Agricultural machinery-Safety-Part 5:Power-driven soil-working machines
- ICS
- 65.060.20
- CCS
- T60
- 发布
- 2011-12-30
- 实施
- 2011-12-30
이 표준은 ISO 4254-1과 함께 적용하기 위한 표준으로서, 콤바인수확기, 목초수확기
Agricultural machinery-Safety-Part 7:Combine harvesters, forage harvesters and cotton harvesters
- ICS
- 65.060.50
- CCS
- T60
- 发布
- 2011-12-30
- 实施
- 2011-12-30
이 표준은 KS B ISO 10326-1에 따라 농업용 차륜형 트랙터의 운전석 현가장치에
Agricultural wheeled tractors-Operator’s seat-Laboratory measurement of transmitted vibration
- ICS
- 13.160;65.060.10
- CCS
- T60
- 发布
- 2011-12-30
- 实施
- 2011-12-30
ISO 4254-1과 함께 사용되는 이 표준은 농업 및 원예산업에 사용되는 파종/시비 겸용
Agricultural machinery-Safety-Part 9:Seed drills
- ICS
- 65.060.30
- CCS
- T60
- 发布
- 2011-12-30
- 实施
- 2011-12-30
This SAE Standard applies to an overhead cover installed on a protective frame or enclosure conforming to SAE J2194 or alternately SAE J1194 and the following additional requirement of a drop test to verify the effectiveness of the overhead cover in protecting the operator from falling objects. The test procedures and performance requirements outlined in this document are based on currently available engineering data. This document establishes test and performance requirements for overhead protection to minimize the frequency and severity of operator injury due to falling objects encounted in normal operation of a wheeled agricultural tractor.
Overhead Protection for Agricultural Tractors Test Procedures and Performance Requirements
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2011-04-01
- 实施
Agricultural tractor - Rear-mounted power take-off types 1, 2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2011
- 实施
This part of ISO 26322 specifies the general safety requirements and their verification for the design and construction of narrow-track and small tractors used in agriculture and forestry. It also specifies the type of information on safe working practices, including residual risks, to be provided by the manufacturer. It provides technical means for improving the level of personal safety of operators and others involved in the course of the normal operation, maintenance and use of these tractors. It is applicable to narrow-track tractors having at least two axles for pneumatic-tyred wheels, or having tracks instead of wheels with a smallest fixed or adjustable track width of not more than 1 150 mm, and to small tractors having an unladen mass not greater than 600 kg. NOTE Tractors having a smallest fixed or adjustable track width greater than 1 150 mm and an unladen mass greater than 600 kg are dealt with in ISO 26322-1. It is not applicable to vibration or braking.
Tractors for agriculture and forestry - Safety - Part 2: Narrow-track and small tractors
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2010-10-01
- 实施
- 2010-10-01
本标准规定了皮带传动轮式拖拉机主要零部件、总成及整机的修理技术要求、检验方法、验收与交付要求。 本标准适用于皮带传动轮式拖拉机主要零部件、总成及整机的修理质量评定。
Repairing quality for wheeled tractors.Part 1:Belt-driven wheeled tractors
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2010-07-08
- 实施
- 2010-09-01
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures; German version EN 15695-2:2009
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2010-07
- 实施
- 2010-07-01
本标准规定了轮式拖拉机质心位置测定的术语和定义、测定条件和测定方法。 本标准适用于轮式拖拉机;其他轮式农业机械可参照执行。
Measurement methods for location of Centre of Wheeled tractor mass-Mass periods methods
- ICS
- 65.060.
- CCS
- T60
- 发布
- 2010-05-20
- 实施
- 2010-09-01
Specifies dimensions and requirements for power take-off and for front three-point linkages in association with a power lift for the attachment of implements or equipment to the front of agricultural wheeled tractors. It is not applicable to tractors which are designed to run in two directions, where either end can be considered to be the front or rear; in this case ISO 500 ANSI/ASABE AD500-1:2004 W/Cor.1, ASABE/ISO 500-2:2004, ASABE/ISO 500-3:2004 and ISO 730 ISO 730-1 apply
Agricultural wheeled tractors - Front-mounted equipment - Part 2: Stationary equipment connection
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2010
- 实施
Volume B30.14 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of side boom tractors powered by an internal combustion engine used for pipe laying or lifting operations, utilizing a lifting boom, drum, wire rope, and/or hydraulic cylinders. The requirements for a side boom tractor that is used for other than lifting operations such as when converted for excavating work, and a side boom tractor with a rated load of one ton or less, are not included in this Volume.
Side Boom Tractors
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2010
- 实施
Provides a uniform method of warning owners, bystanders, and operators of the potential hazards encountered in the operation and servicing of agricultural tractors equipped with agricultural front-end loaders. This Standard emphasizes that hazard control and accident prevention are dependent upon the awareness, concern and prudence of personnel involved in the operation, transport, and maintenance of equipment. Annex A includes safe practice messages to enhance safety in the operation and servicing of such equipment.
Safety Practices for Agricultural Front-End Loaders
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2010
- 实施
本标准规定了拖拉机和联合收割机安全检验的流程、项目和方法。 本标准适用于国家规定需登记管理的拖拉机和联合收割机的注册登记检验和年度检验。
Technical specifications for safety supervision inspection of tractor and combine-harvester
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2009-12-22
- 实施
- 2010-02-01
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbol for operator controls and other displays - Part 4 : symbols for forestry machinery.
- ICS
- 01.080.20;01.080.30;65.060.80
- CCS
- T60
- 发布
- 2009-10-01
- 实施
- 2009-10-23
Agricultural and forestry tractors - Passenger seat - Requirements and test procedures.
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2009-09-01
- 实施
- 2009-09-05
本标准规定了拖拉机驾驶培训机构的术语和定义、主体资格、组织机构、岗位职责和管理制度、人员、教练机、教练场地、教学设备、教室等要求。 本标准适用于拖拉机驾驶培训机构的评价。
General requirements for tractor driving training organizations
- ICS
- 65.060
- CCS
- T60
- 发布
- 2009-04-23
- 实施
- 2009-05-20
本标准规定了节油型农业轮式拖拉机（以下简称节油型拖拉机）燃油经济性评价指标。 本标准适用于以小于73.5kW柴油发动机为动力的农业轮式拖拉机。
Fuel efficiency evalution criteria of agricultural wheeled tractors
- ICS
- 65.060.10
- CCS
- T60
- 发布
- 2009-04-23
- 实施
- 2009-05-20
Any ROPS meeting the performance requirement of ISO 5700 (Static ROPS Test Standard) or ISO 3463 (Dynamic ROPS Test Standard) meets the performance requirements of this SAE Standard if the ROPS temperature/material and seat belt requirements of this document are also met. Fulfillment of the intended purpose requires testing as follows: A temperature-material requirmenet. This can be satisfied by using the appropriate materials or by performing any of the structural performance tests at -18 degrees C. A laboratory test, under repeatable and controlled loading, to permit anaysis of the ROPS for compliance with the performance requirements of this document. Either the static test sequence or the impact test sequence shall be conducted. A set belt anchorage test. The test procedures and performance requirements outlined in this document are based on currently available engineering data. The purpose of this document is to establish the test and performance requirements of a roll-over protective structure (ROPS), designed for wheeled agricultural tractors to minimize the frequency and severity of operator injury resulting from accidental tractor upset.
Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors
- ICS
- 13.340.20;65.060.10
- CCS
- T60
- 发布
- 2009-04-02
- 实施
