U66 船舶通信设备 标准查询与下载

IEC 62616:2010 海上航行及无线电通讯设备和系统.桥式导航表报警系统(BNWAS)

This International Standard specifies the minimum performance requirements@ technical characteristics and methods of testing@ and required test results@ for a bridge navigational watch alarm system (BNWAS) as required by Chapter V of the International Convention for the Safety of Life at Sea (SOLAS)@ as amended. It takes account of the general requirements given in IMO resolution A.694(17) and is associated with IEC 60945. When a requirement in this International Standard is different from IEC 60945@ the requirement in this standard takes precedence. This standard incorporates the parts of the performance standards included in IMO resolution MSC.128(75). NOTE 1 All text of this standard@ whose wording is identical to that of IMO resolution MSC.128(75)@ is printed in italics@ and the resolution and associated performance standard paragraph numbers are indicated in brackets. (128/A1) The purpose of a bridge navigational watch alarm system (BNWAS) is to monitor bridge activity and detect operator disability which could lead to marine accidents. The system monitors the awareness of the Officer of the Watch (OOW) and automatically alerts the Master or another qualified OOW if for any reason the OOW becomes incapable of performing the OOW's duties. This purpose is achieved by a series of indications and alarms to alert first the OOW and@ if he is not responding@ then to alert the Master or another qualified OOW. Additionally@ the BNWAS may provide the OOW with a means of calling for immediate assistance@ if required. The BNWAS should be operational whenever the ship is underway at sea (SOLAS V/19.2.2.3). NOTE 2 BNWAS may not@ in practice@ be realised as a stand alone equipment. It may be integrated in other equipment such as radar@ ECDIS@ etc.

Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS)

GJB 6850.88-2009 水面舰船系泊和航行试验规程 第88部分：作战指挥系统试验

Surface ship mooring and sailing test procedures part 88: Combat command system test

GJB 6850.112-2009 水面舰船系泊和航行试验规程 第112部分：卫星通信系统试验

Surface ship mooring and sailing test procedures part 112: satellite communication system test

GJB 6850.117-2009 水面舰船系泊和航行试验规程 第117部分：通信对抗系统试验

Surface ship mooring and sailing test procedures part 117: communication countermeasure system test

GJB 6850.83-2009 水面舰船系泊和航行试验规程 第83部分：红外警戒设备试验

Surface ship mooring and sailing test procedures part 83: infrared warning equipment test

GJB 6850.104-2009 水面舰船系泊和航行试验规程 第104部分：闭路电视系统试验

Surface ship mooring and sailing test procedures part 104: closed circuit television system test

GJB 6850.108-2009 水面舰船系泊和航行试验规程 第108部分：内部综合通信系统试验

Surface ship mooring and sailing test procedures part 108: internal integrated communication system test

GJB 6850.105-2009 水面舰船系泊和航行试验规程 第105部分：电视监视系统试验

Surface ship mooring and sailing test procedures part 105: TV surveillance system test

GJB 6850.107-2009 水面舰船系泊和航行试验规程 第107部分：战斗报警信号装置试验

Mooring and sailing test procedures for surface ships part 107: Combat warning signal device test

GJB 6850.113-2009 水面舰船系泊和航行试验规程 第113部分：水下通信设备试验

Surface ship mooring and sailing test procedures part 113: underwater communication equipment test

GJB 6850.102-2009 水面舰船系泊和航行试验规程 第102部分：电话系统试验

Surface ship mooring and sailing test procedures part 102: telephone system test

GJB 6850.139-2009 水面舰船系泊和航行试验规程 第139部分：信号地系统试验

Surface ship mooring and sailing test procedures part 139: signal ground system test

GJB 6850.114-2009 水面舰船系泊和航行试验规程 第114部分：海军综合数据链试验

Surface Vessel Mooring and Sea Trial Procedures Part 114: Naval Integrated Data Link Test

GJB 6850.103-2009 水面舰船系泊和航行试验规程 第103部分：广播系统试验

Surface ship mooring and sailing test procedures part 103: broadcasting system test

GJB 6850.82-2009 水面舰船系泊和航行试验规程 第82部分：敌我识别器试验

Surface ship mooring and sailing test procedures part 82: IFF test

GJB 6850.109-2009 水面舰船系泊和航行试验规程 第109部分：无线电通信发送设备及接收设备试验

Surface warship mooring and sailing test procedures part 109: radiocommunication transmitting equipment and receiving equipment test

GJB 6850.111-2009 水面舰船系泊和航行试验规程 第111部分：通信终端设备试验

Surface ship mooring and sailing test procedures part 111: communication terminal equipment test

GJB 6850.110-2009 水面舰船系泊和航行试验规程 第110部分：无线电台设备试验

Surface ship mooring and sailing test procedures part 110: radio station equipment test

BS EN 61162-3:2008+A1:2010 海上导航和无线电通信设备及系统.数字接口.串联数据设备网络

This part of IEC 61162 is based upon the NMEA 2000 standard. The NMEA 2000 standard contains the requirements for the minimum implementation of a serial-data communications network to interconnect marine electronic equipment onboard vessels. Equipment designed to this standard will have the ability to share data, including commands and status, with other compatible equipment over a single signalling channel. Data messages are transmitted as a series of data frames, each with robust error check confirmed frame delivery and guaranteed latency times. As the actual data content of a data frame is at best 50 % of the transmitted bits, this standard is primarily intended to support relatively brief data messages, which may be periodic, transmitted as needed, or on-demand by use of query commands. Typical data includes discrete parameters such as position latitude and longitude, GPS status values, steering commands to autopilots, finite parameter lists such as waypoints, and moderately sized blocks of data such as electronic chart database updates. This standard is not necessarily intended to support high-bandwidth applications such as radar, electronic chart or other video data, or other intensive database or file transfer applications. This standard defines all of the pertinent layers of the International Standards Organisation Open Systems Interconnect (ISO/OSI) model, from the application layer to the physical layer, necessary to implement the required IEC 61162-3 network functionality. This standard defines data formats, network protocol, and the minimum physical layer necessary for devices to interface. SOLAS applications shall employ redundant designs (for instance dual networks, redundant network interface circuits) to reduce the impact of single point failures. The NMEA 2000 standard provides the fundamental tools and methods to support redundant equipment, buses and messaging. Specific shipboard installation designs are beyond the scope of this standard, however some guidance is given in Annex A

Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Part 3: Serial data instrument network

BS EN 61162-3:2009 海上导航和无线电通信设备及系统.数字接口.串联数据设备网络

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Serial data instrument network