Z13 固体废弃物、土壤及其他环境要素采样方法 标准查询与下载

DIN 19682-8:2012 土质. 现场试验. 第8部分: 采用螺旋钻洞法对导水性的测定

Soil quality - Field tests - Part 8: Determination of the hydraulic conductivity by auger hole method

DIN 19662:2012 土质. 现场试验. 使用手持式穿透计测定土壤的穿透阻力

Soil quality - Field tests - Determination of soil penetration resistance by means of a hand held penetrometer

DIN CEN/TS 16177:2012 污泥, 处理过的生物废弃物和土壤. 为可萃取的氨水, 硝酸盐和亚硝酸盐测定而进行的萃取; 德文版本CEN/TS 16177-2012

Sludge, treated biowaste and soil - Extraction for the determination of extractable ammonia, nitrate and nitrite; German version CEN/TS 16177:2012

DIN CEN/TS 16182:2012 污泥, 经处理生物废弃物和土壤. 采用带质量选择性检测的气相色谱法(GC-MS)对壬基酚(NP), 壬基苯酚单乙氧基醇和壬基苯酚二乙氧基醇的测定; 德文版本CEN/TS 16182-2012

Sludge, treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS); German version CEN/TS 16182:2012

DIN CEN/TS 16188:2012 污泥, 处理过的生物废弃物和土壤. 王水和硝酸溶解物中的元素的测定. 火焰原子吸收光谱法 (FAAS); 德文版本CEN/TS 16188-2012

Sludge, treated biowaste and soil - Determination of elements in aqua regia and nitric acid digests - Flame atomic absorption spectrometry method (FAAS); German version CEN/TS 16188:2012

DIN CEN/TS 16190:2012 污泥, 经处理生物废弃物和土壤. 采用带高分辨率质量选择性检测的气相色谱法(HR GC-MS)对二恶英, 呋喃和二恶英类似多氯联苯的测定; 德文版本CEN/TS 16190-2012

Sludge, treated biowaste and soil - Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS); German version CEN/TS 16190:2012

DIN CEN/TS 16183:2012 污泥, 处理过的生物废弃物和土壤. 利用带有质谱检测功能的毛细管气相色谱法 (GC-MS) 进行选择的邻苯二甲酸酯的测定; 德文版本CEN/TS 16183-2012

Sludge, treated biowaste and soil - Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC-MS); German version CEN/TS 16183:2012

DIN CEN/TS 16189:2012 污泥, 经处理生物废弃物和土壤. 采用带荧光检测(FLD)或质量选择性检测(MS)的高效液相色谱法(HPLC)对直链烷基苯磺酸钠(LAS)的测定; 德文版本CEN/TS 16189-2012

Sludge, treated biowaste and soil - Determination of linear alkylbenzene sulfonates (LAS) by high-performance liquid chromatography (HPLC) with fluorescence detection (FLD) or mass selective detection (MS); German version CEN/TS 16189:2012

DIN CEN/TS 16178:2012 污泥, 处理过的生物废弃物和土壤. 药用物品的测定; 德文版本CEN/TS 16178-2012

Sludge, treated biowaste and soil - Determination of pharmaceutical products; German version CEN/TS 16178:2012

ASTM D4982-12 废弃物潜在易燃性筛选分析的标准试验方法

1.1 These test methods are used to indicate the fire-producing or fire-sustaining potential of wastes. The following test methods can be applied to waste liquids, sludges, or solids: Sections Test Method A???Test Sample Exposed to Heat and Flame 7-9 Test Method B???Test Sample Exposed to Spark Source 10 and 11 1.2 These test methods should be used to measure and describe the properties of materials, in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials under actual fire conditions. However, results of these tests may be used in addition to all other factors that are pertinent to a fire hazard assessment of a particular end use. 1.3 These test methods are designed and intended as preliminary tests to complement quantitative analytical techniques that may be used to determine flammability. These test methods offer the option and the ability to screen waste for hazardous flammability potential when the analytical techniques are not available or the total waste composition is unknown. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard information is given in Section 5, 8.3.1 and 9.4.3.

Standard Test Methods for Flammability Potential Screening Analysis of Waste

ASTM D4981-12 在废弃物中筛选氧化剂的标准试验方法

1.1 This test method is intended for use prior to preparation of waste samples for organic analysis. Waste samples that have oxidizing compounds may react with certain reagents in the laboratory (for example, organic solvents). 1.2 This test method is applicable to the analysis of waste liquids, sludges, and solids. 1.3 This test method can neither identify specific oxidizing compounds nor measure concentrations. Since no acid or base is added in this test method, potential oxidizers that require the presence of acid or base will not be detected by this test method. 1.4 It is recommended that, prior to this test, waste samples be screened for water compatibility; see Test Methods D5058. 1.5 This test method is designed and intended as a preliminary test to complement quantitative analytical techniques that may be used to determine the presence of oxidizers in wastes. This test method offers the ability to screen waste for potentially hazardous reactions due to oxidizer content when the more sophisticated techniques are not available or the total waste composition is unknown. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Screening of Oxidizers in Waste

ASTM D5058-12 废弃物的筛选分析兼容性的标准操作规程

This practice is intended for use by those in the waste management industries to aid in determining the compatibility of hazardous wastes before they are commingled.1.1 These practices cover assessment of the compatibility/reactivity of waste. The individual practices are as follows: Sections Practice ACommingled Waste Compatibility 8-12 Practice BPolymerization Potential (Reaction with Triethylamine)13-18 Practice CWater Compatibility 19-25 1.2 These practices are applicable to waste liquids, sludges, semi-solids, and solids. 1.3 These practices are designed and intended as a preliminary or supplementary test to complement the more sophisticated quantitative analytical techniques that should be used to determine waste composition and compatibilities. This standard offers the user the option and the ability to screen wastes for potentially hazardous reactions when the more sophisticated techniques are not available and the total waste composition is unknown and to screen compatibility when the composition is known. (WarningDelayed or slow reactions of wastes may go unnoticed.) 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4.1 Exception8212;The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard and warning statements, see Sections 1.3, 6.1, 10, 11.2.3, 11.5.2, 16 and 23.

Standard Practices for Compatibility of Screening Analysis of Waste

ASTM D4979-12 在废弃物中物理描述筛选分析的标准试验方法

1.1 This test method is used to identify wastes by describing certain physical properties. It has been developed as a rapid but effective means for visually screening wastes when received in the laboratory or during collection at the sampling site. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard and warning information is given in 9.1.6.

Standard Test Method for Physical Description Screening Analysis in Waste

DIN ISO 14238:2011 土质. 生物方法. 土壤中氮矿化性和氮化合性的测定和各种化学物质对这些过程的影响 (ISO/DIS 14238-2011)

Soil quality - Biological methods - Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes (ISO/DIS 14238:2011)

SN/T 2885-2011 进口固体废物原料易燃性试验方法

本标准规定了进口固体废物原料易燃性的试验方法和类别判定。 本标准适用于进口固体废物原料的易燃特性试验。

Test method of inflammability for import solid waste materials

HJ 615-2011 土壤　有机碳的测定　重铬酸钾氧化-分光光度法

本标准规定了测定土壤中有机碳的重铬酸钾氧化-分光光度法。 本标准适用于风干土壤中有机碳的测定。本标准不适用于氯离子含量大于2.0*10mg/kg的盐渍化土壤或盐碱化土壤的测定。 当样品量为0.5g时，本办法的检出限为0.06%（以干重计），测定下限为0.24%（以干重计）。

Soil.Determination of organic carbon.Potassium dichromate oxidation spectrphotometric method

DIN CEN/TR 16110:2011 废物特征描述.应用于废物的生态毒性试验指南.德文版本CEN/TR 16110-2010

Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste; German version CEN/TR 16110:2010

ASTM D7354-11 个人,非商业环境中画家x2019; 废弃颜料处置指南

This guide establishes recommendations for the environmentally responsible clean up and disposal of waste produced by users of artists’ paint products and solvents. It does not supersede laws or regulations, but recommends prudent practices. This guide’s use should be limited to artists whose work is not creating income. Artists who are in business or in other commercial or educational settings will usually be required to meet specific regulatory requirements.1.1 This guide establishes recommendations for the safe and environmentally friendly clean up and disposal of artists’ paints and by-products of their use in a private, non-commercial setting. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Artists&x2019; Paint Waste Disposal in Private, Non-Commercial Settings

ASTM D5438-11 用于化学分析的地板尘埃采集的标准操作规程

This practice may be used to collect dust from carpeted or bare floor surfaces for gravimetric or chemical analysis. The collected sample is substantially unmodified by the sampling procedure. This practice provides for a reproducible dust removal rate from level loop and plush carpets, as well as bare floors. It has the ability to achieve relatively constant removal efficiency at different loadings of surface dust. This practice also provides for the efficient capture of semivolatile organic chemicals associated with the dust. The test system can be fitted with special canisters downstream of the cyclone for the capture of specific semivolatile organic chemicals that may volatilize from the dust particles during collection. This practice does not describe procedures for evaluation of the safety of floor surfaces or the potential human exposure to carpet dust. It is the user's responsibility to evaluate the data collected by this practice and make such determinations in the light of other available information.1.1 This practice covers a procedure for the collection of a sample of dust from carpets and bare floors that can be analyzed for lead, pesticides, or other chemical compounds and elements. 1.2 This practice is applicable to a variety of carpeted and bare floor surfaces. It has been tested for level loop and plush pile carpets and bare wood floors, specifically. 1.3 This practice is not intended for the collection and evaluation of dust for the presence of asbestos fibers. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Collection of Floor Dust for Chemical Analysis

DIN ISO 11268-1:2010 土质. 污染物对蚯蚓(赤子爱胜蚓/安德爱胜蚓)的影响. 第1部分: 急性毒性的测定(ISO/CD 11268-1-2010)

Soil quality - Effects of pollutants on earthworms (Eisenia fetida/Eisenia andrei) - Part 1: Determination of acute toxicity (ISO/CD 11268-1:2010)