S30 机车车辆通用标准综合 标准查询与下载



共找到 439 条与 机车车辆通用标准综合 相关的标准,共 30

Specification for dynamic performance assessment and testing verification of rolling stock

ICS
45.060.01
CCS
S30
发布
2019-12-10 00:00:00.0
实施
2020-07-01 00:00:00.0

GB/T 25343的本部分规定了焊接的生产要求。 本部分适应于轨道车辆及其零部件制造和维修过程中金属材料的焊接。

Railway applications.Welding of railway vehicles and components.Part 4:Production requirements

ICS
45.060.01
CCS
S30
发布
2010-11-10
实施
2011-03-01

GB/T 25343的本部分规定了以下内容: 焊缝的检验及实验; 破坏性试验和无损检验; 表述产品复合型所需的文件。 本部分适用于轨道车辆及其零部件制造和维修过程中金属材料的焊接。

Railway applications.Welding of railway vehicles and components.Part 5:Inspection,testing and documentation

ICS
45.060.01
CCS
S30
发布
2010-11-10
实施
2011-03-01

GB/T 25343的本部分规定了轨道车辆及其零部件制造、维护的设计和分级规则。 本标准适应于轨道车辆及其零部件制造和维护过程中金属材料的焊接。 本部分没有定义计算参数。

Railway applications.Welding of railway vehicles and components.Part 3:Design requirements

ICS
45.060.01
CCS
S30
发布
2010-11-10
实施
2011-03-01

GB/T 25343的本部分规定了焊接制造商认证等级和相关质量要求,同时还规定了焊接制造商的认证程序。 本部分适应于轨道车辆及其零部件制造和维修过程中金属材料的焊接。

Railway applications.Welding of railway vehicles and components.Part 2:Quality requirements and certification of welding manufacturer

ICS
45.060.01
CCS
S30
发布
2010-11-10
实施
2011-03-01

本系列标准针对轨道车辆领域定义了承担新造和维修工作的焊接制造商的资质认证和质量要求。因而本系列标准将设计过程中的性能要求,生产过程中所达到的优质焊缝,以及通过检验展示出的满意的质量联系在一起。 本系列标准适用于轨道车辆及其零部件制造和维护过程中金属材料的焊接。 GB/T 25343的本部分对于轨道车辆及其零部件的焊接给出了总体建议和相关术语的定义。除了合同规定的特殊条款外,本部分适用于所有的焊接方法,包括GB/T 5185中定义的手工焊接、半自动焊、全机械化焊接或全自动焊接。 本部分适用于钢及铝合金的焊接,也包括铸件的焊接。 本系列标准不涉及产品认证。 本系列标准不适用于有特殊规定的设备部件,例如压力容器。

Railway applications.Welding of railway vehicles and components.Part 1:General

ICS
45.060.01
CCS
S30
发布
2010-11-10
实施
2011-03-01

本标准规定了铁道机车车辆车端动力连接器的使用环境,型号标记、结构形式与接触对的编号排列,技术要求、试验方法、检验规则,包装储运等。 本标准适用于铁道机车车辆车端动力连接器的制造、检验和验收。

Vehicle end power couplers for locomotives and rolling stocks

ICS
45.060.01
CCS
S30
发布
2010-09-02
实施
2010-12-01

本标准规定了铁道机车车辆车端电气通信(控制)连接器的使用环境,型号标记、结构形式与接触对的编号排列,技术要求、试验方法、检验规则,包装储运等。 本标准适用于铁道机车车辆车端电气通信连接器的制造、检验和验收。

Vechicle end electric communication (control) couplers for locomotives and rolling stocks

ICS
45.060.01
CCS
S30
发布
2010-09-02
实施
2010-12-01

本标准规定了铁路机车司机室及客车内部噪声测量的条件、方法及报告内容。 本标准适用于铁路内燃、电力机车司机室及客车的内部噪声测量。

Measurement of noise inside railway vehicles

ICS
17.140.30
CCS
S30
发布
1994-07-19
实施
1995-04-01

Rolling stock -- Car body structure for passenger cars -- General rules for design

ICS
45.060.01
CCS
S30
发布
2018-04-19
实施

ICS
ICS45.060.01
CCS
S30
发布
2018-04-12
实施
2018-11-01

ICS
ICS45.060.01
CCS
S30
发布
2018-04-12
实施
2018-11-01

ICS
ICS45.060.01
CCS
S30
发布
2018-04-12
实施
2018-11-01

The standards of the entire "State of railway vehicles" contained technical specifications for systems and components of railway vehicles in accordance with DIN 25003 which are relevant to safety and require monitoring. The standards of the "State of rail vehicles" as a whole define the limit state for the safe operation of railway vehicles and their components. They shall be applied where the vehicles are operated on a public railway infrastructure. The minimum requirements laid down in the standards for the processes for observing the desired condition of the railway vehicles are also to be applied. In addition, the standards must also be observed in the new design if constructive precautions are to be taken to comply with the operating limit criteria. This standard applies to weld-related maintenance of railway vehicles. Each vehicle is assigned a maintenance-related body (ECM), which specifies the applicable regulations and their implementation for the weld-related maintenance. As an alternative to the requirements in Sections 4, 6, 7 and Annex D of DIN EN 15085-2: 2008-01, the classification of the components and components according to 5.1 and the qualification of the welding companies according to Annex C may be applied.

State of railway vehicles - Basic principles and production technology - Part 6: Welding

ICS
45.060.01
CCS
S30
发布
2017-1201
实施

ICS
ICS45.060.01
CCS
S30
发布
2017-11-19
实施
2018-06-01

This European Standard defines a set of reference masses for specifying the requirements for the design, testing, acceptance, marking, delivery and operation of rail vehicles. The reference masses defined in this document are as follows: dead mass; design mass in working order; design mass under normal payload; design mass under exceptional payload; operational mass in working order; operational mass under normal payload; These reference masses are defined with respect to the whole vehicle, but they can also apply to a specific system or component. The specification of values for tolerances applicable to reference masses is not in the scope of this standard. Tolerances can be required by an application standard. Additional loadings due to environmental factors, for example snow and retained or absorbed rainwater, are not in the scope of this European Standard.

Railway applications - Vehicle reference masses; German version EN 15663:2017

ICS
45.060.01;RW020;RW910
CCS
S30
发布
2017-09-00
实施

State of railway vehicles - Basic principles and production technology - Part 9: Measuring

ICS
45.060.01
CCS
S30
发布
2017-06
实施

Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets; German version EN 16585-1:2017

ICS
11.180.01;45.060.20
CCS
S30
发布
2017-05
实施



Copyright ©2007-2016 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号