ZH
RU
ES

New Superconducting Materials

New Superconducting Materials, Total:129 items.

In the international standard classification, New Superconducting Materials involves: Vocabularies, Semiconducting materials, Construction materials, Electric road vehicles, Products of non-ferrous metals, Analytical chemistry, Conducting materials, Testing of metals, Rubber and plastics products, Electricity. Magnetism. Electrical and magnetic measurements, Nuclear energy engineering, Materials for aerospace construction, Aerospace fluid systems and components, Pipeline components and pipelines, Medical equipment, Surface treatment and coating, Electrical wires and cables, Electrical accessories, Magnetic materials, Components for aerospace construction, Road vehicle systems, Plastics, Cutting tools, Equipment for petroleum and natural gas industries, Semiconductor devices, Electromechanical components for electronic and telecommunications equipment, Insulating materials, Aerospace electric equipment and systems, Air quality, Printed circuits and boards.

RU-GOST R, New Superconducting Materials

GOST 23869-1979 Superconductor materials. Terms and definitions
GOST 28981-1991 Cutters for internal turning with super hand materials inserts. Types and basic dimensions
GOST 26474-1985 Diamond and extra-hard composite material drill bits and core bits. Types and main dimensions
GOST 28980-1991 Cutters for external turning with super hand materials inserts. Types and basic dimensions

Group Standards of the People's Republic of China, New Superconducting Materials

T/SHDSGY 135-2023 New Energy Semiconductor Silicon Wafer Material Technology
T/ZAMA 1003-2023 Design and testing specifications for new lightweight materials for new energy vehicles
T/GBMEA 01-2023 New low carbon cementitious material used in concrete
T/CNIA 0143-2022 Ultrapure Resin Vessels for Trace Impurity Analysis of Semiconductor Materials
T/CSEE 0292-2022 Guidelines for the selection of materials and specifications for main steam, reheat steam and water supply pipelines of super (super) critical units in thermal power plants
T/CSCM 06-2020 Carbon fiber reinforced resin matrix composite materials cryoresistive dangling ring for nuclear magnetic resonance
T/CBMF 12-2016 The second generation of new dry process cement matching refractory technical acceptance regulations

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, New Superconducting Materials

GB/T 42529-2023 Evaluation Requirements for Moisture Conduction and Phase Change Breathing Function of New Wall Materials
GB/T 1550-1997 Standard methods for measuring conductivity type of extrinsic semiconducting materials

Military Standard of the People's Republic of China-General Armament Department, New Superconducting Materials

GJB 8770-2015 Specification for new thermal insulation materials resistant to thermal radiation

商务部, New Superconducting Materials

SB/T 11212-2017 New building materials after-sales service specifications

Professional Standard - Electricity, New Superconducting Materials

DL/T 1161-2012 The technical inspection codes for metal and structural components in ultra-supercritical units

Standard Association of Australia （SAA）, New Superconducting Materials

AS 4586:2013

American Society for Testing and Materials (ASTM), New Superconducting Materials

ASTM B884-11 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM B884-05 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM B884-97 Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
ASTM B884-01 Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
ASTM D6712-01(2009) Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ASTM D6712-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ASTM B976-11(2015) Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)
ASTM D5116-06 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
ASTM D5116-97 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products

Association Francaise de Normalisation, New Superconducting Materials

NF EN IEC 61788-26:2020 Supraconductivité - Partie 26 : mesurage du courant critique - Courant critique continu des composites supraconducteurs de RE-Ba-Cu-O
NF EN IEC 61788-4:2020 Supraconductivité - Partie 4 : mesurage du rapport de résistance résiduelle - Rapport de résistance résiduelle des composites supraconducteurs de Nb-Ti et de Nb3Sn
NF EN 61788-10:2006 Supraconductivité - Partie 10 : mesure de la température critique - Température critique des composites supraconducteurs par une méthode par résistance
NF EN 61788-13:2013 Supraconductivité - Partie 13 : mesure des pertes en courant alternatif - Méthodes de mesure par magnétomètre des pertes par hystérésis dans les composites multi-filamentaires supraconducteurs
NF EN IEC 62677-3-103:2019 Profilés thermorétractables basse et moyenne tensions - Partie 3 : spécification pour matériaux particuliers - Feuille 103 : profilés thermorétractables conducteurs en polyoléfine pour applications moyenne tension
NF EN ISO 21304-1:2019 Plastiques - Matériaux à base de polyéthylène à très haute masse moléculaire (PE-UHMW) pour moulage et extrusion - Partie 1 : système de désignation et base de spécifications
NF C31-888-13:2003 Superconductivity - Part 13 : AC loss measurements - Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites.
NF C96-050-18*NF EN 62047-18:2014 Semiconductor devices - Micro-electromechanical devices - Part 18 : bend testing methods of thin film materials
NF C96-050-2*NF EN 62047-2:2006 Semiconductor devices - Micro-electromechanical devices - Part 2 : tensile testing methods of thin film materials.
NF C96-050-21*NF EN 62047-21:2014 Semiconductor devices - Micro-electromechanical devices - Part 21 : test method for Poisson's ratio of thin film MEMS materials

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., New Superconducting Materials

ASHRAE KC-03-11-4-2003 A New Mass Transfer Based Model of VOC Emissions from Building Materials

ES-UNE, New Superconducting Materials

UNE-EN 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (Endorsed by AENOR in November of 2012.)
UNE-CEN/TR 17603-32-05:2022 Space engineering - Structural materials handbook - Part 5: New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN ISO 21304-1:2020 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019)
UNE-EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)
UNE-EN IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications (Endorsed by Asociación Española de Normalizaci...

Danish Standards Foundation, New Superconducting Materials

DS/EN 61788-13:2013 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
DS/ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

CENELEC - European Committee for Electrotechnical Standardization, New Superconducting Materials

EN 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
EN 61788-13:2003 Superconductivity Part 13: AC loss measurements Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites

国家市场监督管理总局、中国国家标准化管理委员会, New Superconducting Materials

GB/T 1550-2018 Test methods for conductivity type of extrinsic semiconducting materials
GB/T 21227-2021 AC loss measurements—Magnetometer methods for hysteresis loss in superconducting multifilamentary composites

National Association of Corrosion Engineers (NACE), New Superconducting Materials

NACE RP0188-1999 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates
NACE SP0188-2006 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates Item No. 21038

American National Standards Institute （ANSI), New Superconducting Materials

ANSI/ASTM D6712:2001 Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ANSI N14.7-2013 Guidance for Packaging Type A Quantities of Radioactive Materials

Ningxia Provincial Standard of the People's Republic of China, New Superconducting Materials

DB64/T 1829.1-2022 Ningxia's "six new" industry high-quality development standard system part 1: new materials

Jiangsu Provincial Standard of the People's Republic of China, New Superconducting Materials

DB32/T 3378-2018 New wall material production enterprise laboratory management specification

Anhui Provincial Standard of the People's Republic of China, New Superconducting Materials

DB34/T 3969-2021 New wall material production enterprise laboratory management specification
DB34/T 3770-2020 Test method for electrical testing of composite insulators for use in superconducting magnet systems

Lithuanian Standards Office , New Superconducting Materials

LST EN 61788-13-2013 Superconductivity -- Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (IEC 61788-13:2012)
LST EN 61788-13-2004 Superconductivity. Part 13: AC loss measurements. Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites (IEC 61788-13:2003)

ACI - American Concrete Institute, New Superconducting Materials

ACI SP-312-2016 Novel Characterization Techniques and Advanced Cementitious Materials: Tribute to James J. Beaudoin

SE-SIS, New Superconducting Materials

SIS SS 11 23 88-1979 Metallic materials — Uniaxial fatigue test pieces from flat products with thickness exceeding 12 mm — Type UP
SIS SS 11 21 21-1979 Tensile test pieces type L

European Committee for Standardization (CEN), New Superconducting Materials

EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
EN ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021)

Japanese Industrial Standards Committee (JISC), New Superconducting Materials

JIS C 2500:2022 Methods of measurement of the magnetic properties of permanent magnet (magnetically hard) materials in an open magnetic circuit using a superconducting magnet
JIS H 7504:2003 Method for evaluation of blow formability by bulging test on metallic superplastic materials
JIS H 7505:2004 Method for evaluation of tensile properties of metallic superplastic materials using R-type specimen
JIS H 7311:2006 Superconductivity -- AC loss measurements -- Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
JIS C 5630-2:2009 Semiconductor devices -- Micro-electromechanical devices-- Part 2: Tensile testing method of thin film materials
JIS C 5630-18:2014 Semiconductor devices -- Micro-electromechanical devices -- Part 18: Bend testing methods of thin film materials

AT-ON, New Superconducting Materials

ONORM E 6551-1996 Electrical installation material - Fittings für rigid steel conduits for heavy or very heavy mechanical stress
ONORM E 6552-1997 Electrical installation material - Fittings für rigid aluminium conduits for heavy or very heavy mechanical stress
ONORM E 6541 Teil.2-1989 Electrical Installation material; rigid steel conduits, piain, for very heavy mechanical stress
ONORM E 6541-1996 Electrical installation material - Rigid steel conduits, piain or threaded, for heavy or very heavy mechanical stress
ONORM E 6542-1997 Electrical installation material - Rigid aluminium conduits, piain or threaded, for heavy or very heavy mechanical stress
ONORM E 6557-1996 Electrical installation material - Fittings for insulating conduits, halogenfree, for light,medium or heavy mechanical stress, non flamepropagating
ONORM E 6548-1996 Electrical installation material - Pliable corrugated insulating conduits, halogenfree, for light, medium or heavy mechanical stress, non flamepropagating

International Electrotechnical Commission (IEC), New Superconducting Materials

IEC TR 63304:2021 Methods of measurement of the magnetic properties of permanent magnet (magnetically hard) materials in an open magnetic circuit using a superconducting magnet
IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applicatio
IEC 62047-2:2006 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
IEC 62047-18:2013 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials
IEC 62899-202-10:2023 Printed electronics - Part 202-10: Materials - Resistance measurement method for thermoformable conducting layer
IEC 62047-21:2014 Semiconductor devices - Micro-electromechanical devices - Part 21: Test method for Poisson's ratio of thin film MEMS materials
IEC 62047-14:2012 Semiconductor devices - Microelectromechanical devices - Part 14: Forming limit measuring method of metallic film materials

British Standards Institution (BSI), New Superconducting Materials

PD IEC TR 63304:2021 Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties in an open magnetic circuit using a superconducting magnet
PD CEN/TR 17603-32-05:2022 Space engineering. Structural materials handbook. New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints
BS ISO 4765:2022 Chemically-induced ultraweak photon emission (UPE). Measurement as an analysis method of degradation of polymeric material
BS IEC 62899-202-10:2023 Printed electronics - Materials. Resistance measurement method for thermoformable conducting layer
23/30468955 DC BS EN IEC 60404-18. Magnetic materials - Part 18. Permanent magnet (magnetically hard) materials. Methods of measurement of the magnetic properties in an open magnetic circuit using a superconducting magnet
BS PD IEC TR 63304:2021 Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties in an open magnetic circuit using a superconducting magnet
21/30423455 DC BS ISO 4765. Chemically Induced UPE (ultra-weak photon emission). Measurement as an analysis method of degradation of polymeric material
BS EN 62047-18:2013 Semiconductor devices. Micro-electromechanical devices. Bend testing methods of thin film materials
BS EN 62047-2:2006 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
BS EN 62047-10:2011 Semiconductor devices. Micro-electromechanical devices. Micro-pillar compression test for MEMS materials
BS EN 62047-21:2014 Semiconductor devices. Micro-electromechanical devices. Test method for Poisson's ratio of thin film MEMS materials
BS EN ISO 21304-2:2021 Plastics. Ultra-high-molecular-weight polyethylene (PE- UHMW) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 62047-14:2012 Semiconductor devices. Micro-electromechanical devices. Forming limit measuring method of metallic film materials
19/30387275 DC BS EN ISO 21304-2. Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
BS EN 62047-11:2013 Semiconductor devices. Micro-electromechanical devices. Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems

Society of Automotive Engineers (SAE), New Superconducting Materials

SAE AMS-T-81914/2-1999 Tubing, Plastic, Extra Flexible, Convoluted, Polytetrafluoroethylene, Close Convolution FSC 9330; Should Be Used Instead of MIL-T-81914/2(AS), which Was Inactivated for New Design on 31 August 1999
SAE AS81531-1998 Marking of Electrical Insulating Materials FSC 6145; Should be Used for New Design Instead of MIL-M-81531, Which Was Inactivated for New Design on September 30, 1998

The American Road & Transportation Builders Association, New Superconducting Materials

AASHTO TF-29-1994 Subcommittee on New Highway Materials Task Force 29 Report Guide Specification for Cathodic Protection of Concrete Bridge Decks

International Organization for Standardization (ISO), New Superconducting Materials

ISO 4765:2022 Chemically-induced ultra-weak photon emission (UPE) — Measurement as an analysis method of degradation of polymeric material
ISO 21304-1:2019 Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications
ISO 11227:2012/Amd 1:2021 Space systems - Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact - Amendment 1: Oblique impacts and Annex C update
ISO 21304-2:2021 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 11542-2:1998/cor 1:2007 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Technical Corrigendum 1

German Institute for Standardization, New Superconducting Materials

DIN 49019-1:1972 Conduits for electrical installation; flexible plain and non inflammable conduits of insulating material for middle and light pressure load
DIN EN ISO 21304-1:2019-08 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019); German version EN ISO 21304-1:2019
DIN EN 3718:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes; German and English version EN 3718:2012
DIN 49018-1:1972 Conduits and fittings for electrical installation; flexible corrugated and inflammable conduits of insulating material and couplers for middle and light pressure load
DIN EN ISO 21304-2:2021-04 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21304-2:2021); German version EN ISO 21304-2:2021
DIN EN 62047-2:2007 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006); German version EN 62047-2:2006

CO-ICONTEC, New Superconducting Materials

ICONTEC 1332-1981

VE-FONDONORMA, New Superconducting Materials

NORVEN 76-21-1965

NZ-SNZ, New Superconducting Materials

AS/NZS 4586:2004 Slip Resistance of Classification of New Pedestrian Surface Materials (Supersedes AS/NZS 3661.1: 1993; Amendment 1: 02/14/2005)

Defense Logistics Agency, New Superconducting Materials

DLA MIL-DTL-83528/11 E-2013 GASKETING MATERIAL, CONDUCTIVE, SHIELDING GASKET, ELECTRONIC, ELASTOMER, EMI/RFI, HOLLOW O-STRIP
DLA MIL-DTL-83528/5 E-2013 GASKETING MATERIAL, CONDUCTIVE, SHIELDING GASKET, ELECTRONIC, ELASTOMER, EMI/RFI, O-RING, NON-STANDARD
DLA MIL-DTL-83528/6 E-2013 GASKETING MATERIAL, CONDUCTIVE, SHIELDING GASKET, ELECTRONIC, ELASTOMER, EMI/RFI, RECTANGULAR, D-CROSS SECTION

CEN - European Committee for Standardization, New Superconducting Materials

EN ISO 21304-1:2019 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications

(U.S.) Ford Automotive Standards, New Superconducting Materials

FORD WSS-M96D33-A8-2006 HOSE, REINFORCED RUBBER, REFORMULATED FUEL RESISTANT CONDUCTIVE, LOW PERMEATING ***TO BE USED WITH FORD WSS-M99P1111-A***

Association of German Mechanical Engineers, New Superconducting Materials

DVS 2216-4-1992 "Ultrasonic joining of moulded parts and semi-finished parts of thermoplastic polymers in mass production, insertion of metal parts and other materials with ultrasonics"

United States Navy, New Superconducting Materials

NAVY MIL-N-24408 E (1)-2002 NOZZLES, FIRE HOSE, COMBINATION AQUEOUS FILM FORMING FOAM, WATER SPRAY, ADJUSTABLE PATTERN (SHIPBOARD USE)
NAVY MIL-N-24408 E-1994 NOZZLES, FIRE HOSE, COMBINATION AQUEOUS FILM FORMING FOAM, WATER SPRAY, ADJUSTABLE PATTERN (SHIPBOARD USE)

European Committee for Electrotechnical Standardization（CENELEC）, New Superconducting Materials

EN 62047-10:2011 Semiconductor devices - Micro-electromechanical devices - Part 10: Micro-pillar compression test for MEMS materials

GM North America, New Superconducting Materials

GM4359P-2010 Cycle ?Immersion Corrosion Test for Stainless Steel Molding Materials Issue 2; Do Not Use on New Programs; Replaced by GMW15283
GM GM292M-2012 Spring Materials - Oil Tempered Chromium-Silicon Steel Wire, Valve Spring Quality (Issue 2; Do Not Use on New Programs; Replaced by GMW16807 Type A)
GM GM2901M-2012 Spring Materials - Oil Tempered High Tensile Steel Wire, Valve Spring Quality (Issue 4; Do Not Use on New Programs; Replaced by GMW16807 Type B)
GM GM6171M-2011 Material and Performance Requirements for Type TR (Thread Rolling) Screws Case Hardened (Issue 3; Do Not Use on New Programs; Replaced by GMW15170; Best Copy Available)