ZH
RU
ES

New hot spot material

New hot spot material, Total:345 items.

In the international standard classification, New hot spot material involves: Products of the textile industry, Construction materials, Electric road vehicles, Protection against fire, Insulating materials, Vocabularies, Non-metalliferous minerals, Plastics, Protection of and in buildings, Footwear, Heat recovery. Thermal insulation, Installations in buildings, Rubber and plastics products, Rubber, Elements of buildings, Ceramics, Reinforced plastics, Materials for aerospace construction, Packaging materials and accessories, Components for electrical equipment, Welding, brazing and soldering, Electrical wires and cables, Electrical engineering in general, Powder metallurgy, Testing of metals, Products of the chemical industry, Power transmission and distribution networks, Pipeline components and pipelines, Refractories, Protection against dangerous goods, Semi-manufactures of timber, Fasteners, Raw materials for rubber and plastics, Environmental testing, Electronic components in general, Linear and angular measurements, Sewing machines and other equipment for the clothing industry, Analytical chemistry, Aerospace electric equipment and systems, Shipbuilding and marine structures in general, Small craft, Iron and steel products.

Military Standard of the People's Republic of China-General Armament Department, New hot spot material

GJB 8770-2015 Specification for new thermal insulation materials resistant to thermal radiation

British Standards Institution (BSI), New hot spot material

PD 6680:2002 Guidance on the new European Standards for thermal insulation materials
BS EN ISO 10350-1:2017 Plastics. Acquisition and presentation of comparable single-point data. Moulding materials
BS ISO 34-1:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces
BS ISO 34-1:2010 Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces
BS EN ISO 7808:1999 Plastics. Thermosetting moulding materials. Determination of transfer flow
BS 7414:1991 Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS EN ISO 11248:2000 Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures
PD CEN/TR 17603-32-05:2022 Space engineering. Structural materials handbook. New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints
22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 293:2023 Tracked Changes. Plastics. Compression moulding of test specimens of thermoplastic materials
BS 3958-4:1982 Thermal insulating materials - Bonded preformed man-made mineral fibre pipe sections
BS EN 61212-3-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated rolled tubes
BS EN 60695-2-13:2011 Fire hazard testing. Glowing/hot-wire based test methods Glow-wire ignition temperature (GWIT) test method for materials
BS EN 60695-2-13:2010 Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials
BS PD IEC/TR 60893-4:2014 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
BS EN ISO 11833-1:2007 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Sheets of thickness not less than 1 mm
BS EN ISO 294-4:2019 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
BS 7655 Sec.2.2:1993 Specification for insulating and sheathing materials for cables. Elastomeric sheathing compounds. Heat resisting types
BS ISO 10059-2:2004 Dense shaped refractory materials - Determination of cold compressive strength - Test with packing
BS EN 479:2018 Tracked Changes. Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of heat reversion
BS IEC 62899-202-10:2023 Printed electronics - Materials. Resistance measurement method for thermoformable conducting layer
BS EN 15534-6:2015 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for fencing profiles and elements
BS EN 15534-1:2014+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
BS EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for decking profiles and tiles
BS EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
BS EN ISO 294-2:2018 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
BS EN 15534-6:2015+A1:2017 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for fencing profiles and elements

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, New hot spot material

GB/Z 32013-2015 New textile materials.Datasheet of thermal properties
GB/T 23615.2-2012 Accessorial material for architectural aluminum alloy profiles.Part 2:Material for thermal barrier polyurethane
GB/T 42529-2023 Evaluation Requirements for Moisture Conduction and Phase Change Breathing Function of New Wall Materials
GB/T 17369-1998 Application categories and basic requirements of thermal insulation materials for building
GB/T 23615.1-2009 Accessorial material for architectural aluminum alloy profiles.Part 1:Thermal barrier strip of polyamide

ACI - American Concrete Institute, New hot spot material

ACI SP-209-2002 Innovations in Design with Emphasis on Seismic@ Wind@ and Environmental Loading; Quality Control and Innovations in Materials/Hot-Weather Concreting
ACI SP-312-2016 Novel Characterization Techniques and Advanced Cementitious Materials: Tribute to James J. Beaudoin

商务部, New hot spot material

SB/T 11212-2017 New building materials after-sales service specifications

RU-GOST R, New hot spot material

GOST R 56507-2015 Aggregates thermolit of siliceous raw materials. Specifications
GOST ISO 2478-2013 Dense shaped refractory products. Determination of permanent change in dimensions on heating
GOST 28913-1991 Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources

Standard Association of Australia （SAA）, New hot spot material

AS 4586:2013

Group Standards of the People's Republic of China, New hot spot material

T/ZAMA 1003-2023 Design and testing specifications for new lightweight materials for new energy vehicles
T/GBMEA 01-2023 New low carbon cementitious material used in concrete
T/ZZB 1482-2019 Heat activated stiffeners and toepuffs for footwear
T/CBMF 12-2016 The second generation of new dry process cement matching refractory technical acceptance regulations
T/ZZB 0797-2018 Packing material Polyolefin cross-linked shrink film
T/CNEA 101.17-2021 PWR pressure boundary components—Material— Part 17:Hot-rolled and cold-finished age-hardening stainless steel bars and shapes

American National Standards Institute （ANSI), New hot spot material

ANSI/ASTM D6194:2010 Test Method for Glow-Wire Ignition of Materials
ANSI/ASTM E1623:2011 TEST METHOD FOR DETERMINATION OF FIRE AND THERMAL PARAMETERS OF MATERIALS, PRODUCTS, AND SYSTEMS USING AN INTERMEDIATE SCALE CALORIMETER (ICAL)
ANSI/ASTM B613:1976 Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ANSI/ASTM E2230:2013 Practice for Thermal Qualification of Type B Packages for Radioactive Material
ANSI/ASTM D3150:2011 Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., New hot spot material

ASHRAE KC-03-11-4-2003 A New Mass Transfer Based Model of VOC Emissions from Building Materials
ASHRAE 4168-1998 The Knitted Metal Fiber Burner: A New Generation of Surface Combustion Material for Radiant Heat and Low NOx Applications

Japanese Industrial Standards Committee (JISC), New hot spot material

JIS A 9511:2006 Preformed cellular plastics thermal insulation materials
JIS C 2251:1992 Rigid mica materials for heat molding
JIS A 9511 AMD 1:2009 Preformed cellular plastics thermal insulation materials (Amendment 1)
JIS A 9511 R AMD 1:2009 Preformed cellular plastics thermal insulation materials (Amendment 1)
JIS C 60695-2-13:2013 Fire hazard testing.Part 2-13: Glowing/hot-wire based test methods.Glow-wire ignition temperature (GWIT) test method for materials
JIS R 1672:2006 Determination of specific heat of fiber-reinforced ceramics composite by differential scanning calorimetry methods
JIS C 60695-2-20:2001 Fire hazard testing -- Part 2: Glowing/Hot wire based test methods -- Section 20: Hot-wire coil ignitability test on materials
JIS K 6718-2:2015 Plastics -- Poly(methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 2: Extruded sheets
JIS F 1034-1:2002 Small craft -- Hull construction and scantlings -- Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate
JIS C 0079:2001 Fire hazard testing -- Part 2: Glowing/Hot wire based test methods -- Section 20: Hot-wire coil ignitability test on materials

American Society for Testing and Materials (ASTM), New hot spot material

ASTM D6194-23 Standard Test Method for Glow-Wire Ignition of Materials
ASTM D3874-18 Standard Test Method for Ignition of Materials by Hot Wire Sources
ASTM D3874-20 Standard Test Method for Ignition of Materials by Hot Wire Sources
ASTM C592-00 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
ASTM C592-97 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
ASTM C592-04 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
ASTM C592-80 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation )Metal-Mesh Covered) (Industrial Type)
ASTM C592-08 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
ASTM D6194-10 Standard Test Method for Glow-Wire Ignition of Materials
ASTM D3874-10 Standard Test Method for Ignition of Materials by Hot Wire Sources
ASTM B613-76(2012) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ASTM B613-76(2000) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ASTM B613-76(2006) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ASTM D3641-21 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM C800-05 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
ASTM C800-02e1 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
ASTM C800-02 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
ASTM C800-03 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
ASTM C800-03e2 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
ASTM C800-08 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
ASTM C800-14 Standard Specification for Fibrous Glass Blanket Insulation 40;Aircraft Type41;
ASTM B613-17 Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ASTM E2230-22 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
ASTM B613-17(2023) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ASTM A437/A437M-06 Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
ASTM C303-98 Standard Test Method for Dimensions and Density of Preformed Block and Broad-Type Thermal Insulation
ASTM C303-02 Standard Test Method for Dimensions and Density of Preformed Block and Broad-Type Thermal Insulation
ASTM C167-09 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
ASTM E2230-08 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
ASTM C303-10(2016) Standard Test Method for Dimensions and Density of Preformed Block and Board&x2013;Type Thermal Insulation
ASTM C356-10 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM C687-96 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
ASTM C421-95 Standard Test Method for Tumbling Friability of Preformed Block-Type Thermal Insulation
ASTM C421-00 Standard Test Method for Tumbling Friability of Preformed Block-Type Thermal Insulation
ASTM C687-02 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
ASTM D6341-13 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between ndash;30 and 140deg;F (ndash;34.4 and 60deg;C)
ASTM D6341-14 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between ndash;30 and 140deg;F 40;ndash;34.4 and 60deg;C41;
ASTM C167-98 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
ASTM C203-99 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C167-98(2003) Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
ASTM C203-05a Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C203-05 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C203-22 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C302-13(2022) Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
ASTM C203-05a(2012) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C303-21 Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
ASTM C203-05a(2017) Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C303-07 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
ASTM C167-15 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

CZ-CSN, New hot spot material

CSN 02 5243-1959
CSN 34 6501 Cast.7-1986 Thermal endurance of thermosetting moulding and embedding materials
CSN 64 0206-1976 Compression moulding test specimens f thermoaetting materials
CSN 02 5244-1959
CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials
CSN 64 0215-1989 Flowability determinantion of termo- etting molding materials
CSN 64 0207-1979 Compression moulding est specimens oí thermo- lastics materials. eneral conditions

Ningxia Provincial Standard of the People's Republic of China, New hot spot material

DB64/T 1829.1-2022 Ningxia's "six new" industry high-quality development standard system part 1: new materials

SE-SIS, New hot spot material

SIS SS 16 11 54-1980 Plastics — Injection moulding test specimens of thermoplastic materials
SIS SS 16 67 20-1979 Thermoset polyester moulding materials — General information
SIS SEN 24 02 41-1968 Rubber and thermoplastic insulated cords and cables Light PVC-insulated and PVC-sheathed flexible cords Type SKK and SKX

Association Francaise de Normalisation, New hot spot material

NF EN 62329-3-100:2010 Profilés thermorétractables - Partie 3 : exigences relatives aux dimensions des profilés, exigences de matériaux et performances de compatibilité - Feuille 100 : dimensions des profilés thermorétractables
NF EN 62329-3-101:2010 Profilés thermorétractables - Partie 3 : exigences relatives aux dimensions des profilés, exigences de matériaux et performances de compatibilité - Feuille 101 : profilés thermorétractables, exigences relatives aux matériaux semi-rigides en pol...
NF P75-222/A1:2007 Thermal insulating products for building applications - Determination of behaviour under point load.
NF EN 61100:1992 Classification des isolants liquides selon le point de feu et le pouvoir calorifique inférieur
NF T51-223:1985 Plastics. Semi-cristalline materials. Determination of the conventional melting temperature by thermal analyse.
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF EN IEC 62677-3-101:2018 Profilés thermorétractables basse et moyenne tensions Partie 3 : spécification pour matériaux particuliers - Feuille 101 : profilés thermorétractables en polyoléfine pour applications basse tension
NF EN 62329-3-102:2010 Profilés thermorétractables - Partie 3 : exigences relatives aux dimensions des profilés, exigences de matériaux et performances de compatibilité - Feuille 102 : profilés thermorétractables en élastomère, semi-rigides - Exigences relatives aux...
NF T50-062-1*NF EN ISO 10350-1:2017 Plastics - Acquisition and presentation of comparable single-point data - Part 1 : moulding materials
NF EN ISO 294-3:2020 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 3 : plaques de petites dimensions
NF EN ISO 294-2:2018 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 2 : Barreaux de traction de petites dimensions
NF P24-503*NF EN 479:2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion
NF B40-379:1982 Refractory products - Prepared unshaped materials control of castables refractories dense and insulating
NF EN 479:2018 Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Détermination du retrait à chaud
NF EN IEC 62677-3-103:2019 Profilés thermorétractables basse et moyenne tensions - Partie 3 : spécification pour matériaux particuliers - Feuille 103 : profilés thermorétractables conducteurs en polyoléfine pour applications moyenne tension
NF T51-294-3*NF EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates
NF T70-504:2018 Energetic materials for defense - Safety, Vulnerability - Progressive heating (temperature of ignition)
NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
NF EN ISO 294-4:2019 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4 : détermination du retrait au moulage
NF EN 1842:1997 Plastiques - Matières à mouler thermodurcissables (SMC-BMC) - Détermination du retrait au moulage par compression.
NF T70-504:2007 Energetic materials for defense - Safety - Vulnerability - Progressive heating (temperature of ignition).
NF T70-504:1996 Energetic materials for defense. Safety. Vulnerability. Progressive heating (temperature of ignition).
NF T51-294-2*NF EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
NF EN ISO 294-1:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 1 : principes généraux, et moulage des éprouvettes à usages multiples et des barreaux
NF T58-300-6*NF EN 15534-6+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 6 : Specifications for fencing profiles and elements
NF T58-300-6/IN1*NF EN 15534-6/IN1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6 : specifications for fencing profiles and elements
NF C20-924-2-13*NF EN 60695-2-13:2011 Fire hazard testing - Part 2-13 : glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
NF T58-300-5*NF EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5 : specifications for cladding profiles and tiles
NF T58-300-4*NF EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4 : specifications for decking profiles and tiles
NF EN 15534-6/IN1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 6 : Spécifications relatives aux profiles et éléments pour clôtures
NF EN 15534-6+A1:2018 Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 6 : Spécifications relatives aux profilés et éléments pour clôtures
NF T51-294-1*NF EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens

PL-PKN, New hot spot material

PN C89011-1992 Plastics. Compression moulding test specimens of thermoplasticmaterials
PN C89040-1964 Thermosetting moulding ma?erials. Evaluotion of test specimens oppearance
PN C89036-1961 Thermosetting moulding materials. Flow test by Raschig raethod
PN C99220-02-1988 Materials for registration (recording) Heat sensitive paper for electrocardiography type EKG-30
PN-EN ISO 294-3-2021-01 E Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)

Jiangsu Provincial Standard of the People's Republic of China, New hot spot material

DB32/T 3378-2018 New wall material production enterprise laboratory management specification

Anhui Provincial Standard of the People's Republic of China, New hot spot material

DB34/T 3969-2021 New wall material production enterprise laboratory management specification

(U.S.) Ford Automotive Standards, New hot spot material

FORD WSS-M5G44-C1-1996 DEADENER, LIGHT WEIGHT, HEAT BONDABLE
FORD ESB-M5G30-A2-2000 DEADENER, MASTIC SHEET - HEAT EXPANDING
FORD ESB-M5G36-A-1983 DEADENER, POLYOLEFIN SHEET - HEAT EXPANDING
FORD FLTM BV 021-01-2000 CONSTRAINED EXPANSION TEST FOR HEAT-EXPANDABLE VIBRATION DAMPING MATERIALS
FORD WK902-2005 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS
FORD WSS-M5G44-C2-1996 DEADENER, MEDIUM WEIGHT, HEAT BONDABLE (Shown on WSS-M5G44-C1)
FORD WSS-M5G44-C3-1996 DEADENER, HEAVY WEIGHT, HEAT BONDABLE (Shown on WSS-M5G44-C1)
FORD WK 902-2010 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS
FORD WSS-M5G62-A1-1995 DEADENER, ASPHALT/SBR MASTIC, LIGHT WEIGHT, PSA/HEAT BONDABLE
FORD WK 902 APPENDIX A-2013 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS
FORD WK 902-2013 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS

Professional Standard - Aviation, New hot spot material

HB/Z 305-1997 Composite autoclave molding process

German Institute for Standardization, New hot spot material

DIN 7742-1:1988-01 Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation
DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN ISO 10350-1:2018-03 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017); German version EN ISO 10350-1:2017
DIN EN 479:2018-04 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion; German version EN 479:2018
DIN EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
DIN EN 61212-3-2:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes (IEC 61212-3-2:2006); German version EN
DIN EN 60371-3-3:1997 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 3: Rigid mica materials for heating equipment (IEC 60371-3-3:1983); German version EN 60371-3-3:1995
DIN 30910-6:1990 Sintered metal materials; Werkstoff-Leistungsblätter (WLB) sint-material specifications; part 6: hot-forged sintered steels for structural parts
DIN EN ISO 10350-1:2018 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
DIN EN ISO 294-4:2019-04 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019
DIN 53497:2017-04 Testing of plastics - Hot storage test on mouldings made of thermoplastic moulding materials without external mechanical stressing
DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
DIN EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
DIN EN 15534-5:2019 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German and English version prEN 15534-5:2019
DIN EN ISO 294-4:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO/FDIS 294-4:2018); German and English version prEN ISO 294-4:2018
DIN EN 61212-3-3:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods (IEC 61212-3-3:2006); German version EN
DIN 16941:2012-11 Thermoplastics extruded profiles - General tolerances of size, form and orientation
DIN EN ISO 294-2:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
DIN EN ISO 293:2023-10 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN 15534-4:2014-04 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles; German version EN 15534-4:2014
DIN EN 15534-6:2018-01 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements; German version EN 15534-6:2015+A1:2017
DIN EN 15534-5:2019-02 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles; German and English version prEN 15534-5:2019 / ...
DIN 16941:1986 Thermoplastics extruded profiles; general tolerances of size, form and orientation
DIN 19698-5:2018-06 Characterization of solids - Sampling of solid and semi-solid materials - Part 5: Guidance for sampling hot-spots of populations
DIN EN 14510:2005-08 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack); German version EN 14510:2005

RO-ASRO, New hot spot material

STAS SR ISO 2577:1995 Plastics - Thermosetting moulding materials - Determination of shrinkage
SR ISO 295:1994 Plastics Compression moulding of test specimens of termosetting materials
STAS E 12194-1984 PLASTICS Shrinkage determination of thermoplastic materials used lor injection moulding
STAS 7144/1-1985 Electrical insulating materials THERM06ETTING LAMIXATED SHEETS Types and dimensions
STAS 11429-1980 Antiblister and lubricating materials for steel pouring THERMO INSULATING AND THERMOGENIC PLATES, TYPE PTN:S1 FOR STEELS POURING

Danish Standards Foundation, New hot spot material

DS/EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
DS/EN ISO 7808:1999 Plastics - Thermosetting moulding materials - Determination of transfer flow
DS/EN ISO 10350-1:2008 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials
DS/EN ISO 11248:1999 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures
DS/EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
DS/EN 17104:2021 Thermoplastics rigid protective wallcovering panels for internal use in buildings – Performance characteristics
DS/EN ISO 294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
DS/EN ISO 294-2:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars.
DS/ISO 15853:2000 Thermoplastics materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
DS/EN 12877-2:2000 Colouring materials in plastics - Determination of colour staility to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding
DS/EN ISO 294-1/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens
DS/EN ISO 294-1:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens

Indonesia Standards, New hot spot material

SNI ISO 295:2011 Plastics - Compression moulding of test specimens of thermosetting materials

AENOR, New hot spot material

UNE-ISO 2577:2014 Plastics. Thermosetting moulding materials. Determination os shrinkage
UNE-EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
UNE-EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
UNE-EN ISO 10350-1:2008 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007)
UNE-EN ISO 11248:2000 PLASTICS - THERMOSETTING MOULDING MATERIALS - EVALUATION OF SHORT-TERM PERFORMANCE AT ELEVATED TEMPERATURES (ISO 11248:1993)
UNE-EN ISO 294-2:1999 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 2: SMALL TENSILE BARS (ISO 294-2:1996)
UNE-EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
UNE-EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
UNE-EN ISO 10350-1:2008/A1:2014 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007/Amd 1:2014)
UNE-EN 12877-2:2000 COLOURING MATERIALS IN PLASTICS - DETERMINATION OF COLOUR STABILITY TO HEAT DURING PROCESSING OF COLOURING MATERIALS IN PLASTICS - PART 2: DETERMINATION BY INJECTION MOULDING
UNE-EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles
UNE-EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, New hot spot material

GB/T 23615.1-2017 Thermal barrier materials for architecture aluminium alloy extruded profiles—Part 1：Polyamide profiles
GB/T 23615.2-2017 Thermal barrier materials for architectural aluminum alloy profiles—Part 2: Thermal barrier polyurethane

ES-AENOR, New hot spot material

Professional Standard - Light Industry, New hot spot material

QB/T 2676-2004 Footwear-Counter and puff materials-Hot melt type and solvent type
QB/T 2676-2013 Stiffeners and toepuffs for footwear.Heat activated and solvent activated
QB/T 4871-2015 Footwear machines.Disk type thermoplastic rubber injection moulding

IN-BIS, New hot spot material

IS 2213-1962

Liaoning Provincial Standard of the People's Republic of China, New hot spot material

DB21/T 2617-2016 Polymer material aluminum composite radiator

GOSTR, New hot spot material

GOST ISO 18333-2017 Pallets for materials handling. Characteristics of new wooden components for flat pallets

Korean Agency for Technology and Standards (KATS), New hot spot material

KS M 3005-2002 Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS L 1604-2002 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS C IEC 60114-2017(2022) Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type
KS F 2465-1995 Standard methods of test for thickness and density of blanket or batt-type thermal insulation materials
KS C IEC 60114:2005 Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type
KS C IEC 60114:2017 Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type
KS C IEC 60695-2-13-2017(2022) Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignition temperature(GWIT) test method for materials
KS M ISO 20028-1:2019 Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications
KS F 2465-2021 Standard test method for thickness and density of blanket or batt-type thermal insulation materials

International Organization for Standardization (ISO), New hot spot material

ISO 10724:1994 Plastics - Thermosetting moulding materials - Injection moulding of multipurpose test specimens
ISO/CD 10350-1:1980 Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
ISO 34-1:2010 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 34-1:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 294-3:2020 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
ISO 11833-1:2007 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm

未注明发布机构, New hot spot material

DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
BS 7414:1991(1999) Specification for White PVC - U extruded hollow profiles with heat welded corner joints for plastics windows : materials type B
DIN EN ISO 294-2:1998 Plastics — Injection molding of test specimens of thermoplastic materials — Part 2: Small tensile bars
DIN EN 13467:2018 Thermal insulation materials for building services and industrial systems – determining the dimensions, squareness and linearity of pre-formed pipe insulation materials

Lithuanian Standards Office , New hot spot material

LST EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
LST EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
LST EN ISO 7808:2002 Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992)
LST EN ISO 10350-1:2008 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007)
LST EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
LST EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
LST EN 12877-2-2002 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding
LST EN ISO 294-2:2000 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)

National Metrological Verification Regulations of the People's Republic of China, New hot spot material

JJG(民航) 0095-2006 Verification Regulation of Model HCS9000B/HCS9200B Composite Repair Controller/Hot Bonder

ES-UNE, New hot spot material

UNE-EN 479:2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion
UNE-EN ISO 10350-1:2018 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
UNE-CEN/TR 17603-32-05:2022 Space engineering - Structural materials handbook - Part 5: New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
UNE-EN IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications (Endorsed by Asociación Española de Normalizaci...
UNE-EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications (Endorsed by Asociación Española de Normalización in May of 2...
UNE-EN 62329-3-101:2010 Heat-shrinkable moulded shapes -- Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance -- Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requireme...
UNE-EN IEC 62677-3-102:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications (Endorsed by Asociación Española de Normaliz...
UNE-EN 15534-6:2016+A1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements

European Committee for Standardization (CEN), New hot spot material

EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
EN ISO 294-3:1998 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3:1996
EN ISO 294-3:2003 Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates ISO 294-3: 2002
EN ISO 11833-1:2019 Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019)
EN ISO 11833-1:2007 Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (Remains Current)

General Motors do Brasil, New hot spot material

GMSA EMS 0373-2011 Material for non heat treated aluminum silicon cylinder head Material para cabe莽ote de alum铆nio n茫o tratado termicamente Revision A; Do Not use on New Programs; No Replacement
GMSA LTP .PE.114-2011 Procedure for determining the heat resistance of textiles and trim materials Determina莽茫o da resist锚ncia 脿 temperatura de materiais t锚xteis e de acabamento Do Not use on New Programs; No Replacement
GMSA LTP.PE.108-2011 Procedure for determining the resistance to" spotting" of trim materials by water and saline solution Determina莽茫o da resist锚ncia ao gotejamento de 谩gua e de solu莽茫o salina em materiais de acabamento Do Not use on New Programs; No Replacement

United States Navy, New hot spot material

NAVY MIL-PRF-121 G-2001 BARRIER MATERIALS, GREASEPROOF, WATERPROOF, FLEXIBLE, HEAT-SEALABLE
NAVY QPL-131-47 (1)-2007 BARRIER MATERIALS, WATERVAPORPROOF, GREASEPROOF, FLEXIBLE, HEAT-SEALABLE
NAVY QPL-131-47-2006 BARRIER MATERIALS, WATERVAPORPROOF, GREASEPROOF, FLEXIBLE, HEAT-SEALABLE
NAVY MIL-PRF-131 K-2005 BARRIER MATERIALS, WATERVAPORPROOF, GREASEPROOF, FLEXIBLE, HEAT-SEALABLE

ZA-SANS, New hot spot material

SANS 5915:1980 Resistance to thermal shock and structural spalling of shaped refractory materials
SANS 10177-9:2006 Fire testing of materials, components and elements used in buildings Part 9: Small-scale burning characteristics of building materials: ignition, flame spread and heat contribution
SANS 12107:2003 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components

Association of German Mechanical Engineers, New hot spot material

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), New hot spot material

ASHRAE CH-06-6-2006 Symposium on Thermal Modeling of Phase-Change Materials in Building Envelopes: Old Problem, New Developments

International Federation of Trucks and Engines, New hot spot material

NAVISTAR TMS 6606-2016 VOID - Insulation, Floor Mat, Dash & Carpet (E-5 Type)

HU-MSZT, New hot spot material

(U.S.) Plastic Pipe Association, New hot spot material

PPI TR-11-2006 Resistance of Thermoplastic Piping Materials to Micro- and Macro- Biological Attack

Defense Logistics Agency, New hot spot material

DLA MIL-DTL-21097/3 F VALID NOTICE 1-2013 Connectors, Electrical, Printed Wiring Board Composite, Adapter, Contact Spacing (.200) Individual Contacts, Type CS
DLA MIL-DTL-21097/13 C VALID NOTICE 1-2010 Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing: 0.200, Alternate Dual Row, Type CR, Removable Contact
DLA MIL-DTL-21097/2 F VALID NOTICE 1-2010 Connectors, Electrical, Printed Wiring Board Composite, Receptacle, Contact Spacing (.200) Single Row, Type CR

Society of Automotive Engineers (SAE), New hot spot material

SAE AMS3581B-1991 CAST RODS, TUBES, AND SHAPES, METHYL METHACRYLATE PLASTIC Heat Resistant
SAE AMS5587F-2010 Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 47.5Ni 22Cr 1.5Co 9.0Mo 0.60W 18.5Fe Solution Heat Treated
SAE AS81531-1998 Marking of Electrical Insulating Materials FSC 6145; Should be Used for New Design Instead of MIL-M-81531, Which Was Inactivated for New Design on September 30, 1998

US-AAMA, New hot spot material

AAMA 311-2013 Voluntary Specification for Rigid Thermoplastic Cellulosic Composite Fenestration Exterior Profiles

US-CFR-file, New hot spot material

CFR 40-1048.810-2013 Protection of Environment. Part1048:Control of emissions from new, large nonroad spark-ignition engines. Section1048.810:What materials does this part reference?

International Electrotechnical Commission (IEC), New hot spot material

IEC 60114:1959/COR1:1959 Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type; Corrigendum 1
IEC 60114:1959 Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type
IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applicatio
IEC 60695-2-13:2010 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
IEC 60695-2-13:2021 RLV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
IEC 60695-2-13:2010/AMD1:2014 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

KR-KS, New hot spot material

KS C IEC 60114-2017 Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type
KS M ISO 20028-1-2019 Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications

Professional Standard - Building Materials, New hot spot material

JC/T 490-2010 Dimensional tolerance of thermosetting glass fibre reinforced plastics pultruded shapes
JC/T 490-1992 Dimensional tolerance of extruded sections of fiber glass reinforced thermosetting plastic

Professional Standard - Machinery, New hot spot material

JB/T 8630-1997 Test method of determining melting heat, melting point and crystallization heat and crystallizing point of electrical insulation materials with differential scanning calorimetric method

GM North America, New hot spot material

GM GM337M-2011 Mechanical Properties and Material Requirements for Cold Formed and Headed Non-Heat Treated Externally Threaded Fasteners (Issue 2; Do Not Use on New Programs; Replaced by GMW25)
GM GM337M-2000 Mechanical properties and Meterial Requirements for Cold Formed and Heated Non-Heat Treated Externally Threaded Fasteners

NZ-SNZ, New hot spot material

AS/NZS 4586:2004 Slip Resistance of Classification of New Pedestrian Surface Materials (Supersedes AS/NZS 3661.1: 1993; Amendment 1: 02/14/2005)
NZS 4222:1992 MATERIALS FOR THE THERMAL INSULATION OF BUILDINGS PART 1 - MATERIALS GENERAL PART 2 - LOOSE FILL THERMAL INSULATION MATERIALS PART 3 - FLEXIBLE SLAB AND BLANKET THERMAL INSULATION MATERIALS PART 4 - REFLECTIVE FOIL THERMAL INSULATION MATERIALS

EU/EC - European Union/Commission Legislative Documents, New hot spot material

92/42/EEC CORR-2009 Council Directive on Efficiency Requirements for New Hot-Water Boilers Fired with Liquid or Gaseous Fuels

AT-ON, New hot spot material

OENORM EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
OENORM B 6001-2021 In-situ formed insulation materials for thermal and/or acoustic insulation in building construction - Product types, performance requirements and specifications for use

CH-SNV, New hot spot material

SN EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)

国家建筑材料工业局, New hot spot material

JC/T 490-1991 Dimensional tolerances for glass fiber reinforced thermoset plastic pultruded profiles

CEN - European Committee for Standardization, New hot spot material

PREN 15534-5-2019 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles

European Committee for Electrotechnical Standardization（CENELEC）, New hot spot material

EN 60695-2-13:2010 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials (Incorporates Amendment A1: 2014)

CENELEC - European Committee for Electrotechnical Standardization, New hot spot material

EN 60695-2-13:2001 Fire Hazard Testing Part 2-13: Glowing Hot-Wire Based Test Methods - Glow-Wire Ignitability Test Method for Materials

工业和信息化部, New hot spot material

JB/T 12174.5-2018 Heat shrinkable molded profiles Part 5: Semi-rigid, highly elastic material specifications and system performance

The American Road & Transportation Builders Association, New hot spot material

AASHTO M 249-2008 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)

CO-ICONTEC, New hot spot material

GM Global, New hot spot material

GMW 3131-2011 End of Line Reprocess Materials - Generic Qualification Issue 2; English; Do Not Use on New Programs; No Replacement

国家质量监督检验检疫总局, New hot spot material

SN/T 4879-2017 Test methods for combustion properties of polymers and their composites Microcalorimetry

IT-UNI, New hot spot material

UNI 7819-1978