ZH
RU
ES

New Piezoelectric Materials

New Piezoelectric Materials, Total:497 items.

In the international standard classification, New Piezoelectric Materials involves: Construction materials, Road vehicle systems, Piezoelectric and dielectric devices, Electric road vehicles, Tyres, Insulating materials, Vocabularies, Hand-held tools, Ground service and maintenance equipment, Chipless working equipment, Plastics, Testing of metals, Road vehicles in general, Adhesives, Iron and steel products, Elements of buildings, Reinforced plastics, Inorganic chemicals, Electrical wires and cables, Welding, brazing and soldering, Medical equipment, Cellular materials, Rubber and plastics products, Electricity. Magnetism. Electrical and magnetic measurements, Manufacturing forming processes, Non-ferrous metals, Products of non-ferrous metals, Powder metallurgy, Shipbuilding and marine structures in general, Aerospace electric equipment and systems, Rotating machinery, Products of the chemical industry, Electromechanical components for electronic and telecommunications equipment, Electronic components in general, Nuclear energy engineering, Materials for aerospace construction, Insulating fluids, Products of the textile industry, Transformers. Reactors, Structures of buildings, Pipeline components and pipelines, Ceramics, Protection against fire, Electrical accessories, Magnetic materials, Refractories, Non-textile floor coverings, Road engineering, Electromagnetic compatibility (EMC), Paints and varnishes, Equipment for railway/cableway construction and maintenance, Installations in buildings, Components for electrical equipment, Corrosion of metals, Radiation measurements, Printed circuits and boards, Insulation.

IET - Institution of Engineering and Technology, New Piezoelectric Materials

HDBK ELEC RESIST-2012 The Handbook of Electrical Resistivity: New materials and pressure effects

商务部, New Piezoelectric Materials

SB/T 11212-2017 New building materials after-sales service specifications

Military Standard of the People's Republic of China-General Armament Department, New Piezoelectric Materials

GJB 8770-2015 Specification for new thermal insulation materials resistant to thermal radiation
GJB 9852.11-2020 Technical requirements for energy equipment selection Part 11: Explosion-proof electrostatic voltmeter

Group Standards of the People's Republic of China, New Piezoelectric Materials

T/SHDSGY 136-2023 New energy hydrogen fuel cell material technology
T/ZAMA 1003-2023 Design and testing specifications for new lightweight materials for new energy vehicles
T/GBMEA 01-2023 New low carbon cementitious material used in concrete
T/ZZB 2123-2021 NC forming hydraulic press for permanent magnet materials
T/CNS 12-2019 Environmentally assisted fatigue model of metallic materials used in pressurized water reactor nuclear power plants
T/ACREI CREIS34005-2022 Rare earth permanent materials for drive motors of new energy vehicles
T/CNEA 101.16-2021 PWR pressure boundary components—Material— Part 16:Stainless steel bars and shapes for pressure vessels
T/CBMF 12-2016 The second generation of new dry process cement matching refractory technical acceptance regulations
T/CEC 560.1～560.2-2021 Materials for rated voltage 500kV DC cables
T/CIPR 0011-2022 Preparation method of high strength aluminum alloy profile for new energy vehicle battery tray
T/CIPR 0011-2023 Preparation method of high-strength aluminum alloy profile for new energy vehicle battery tray
T/CAMMT 31-2020 Molding process of composite prepreg
T/QGCML 654-2023 Special iron for cathode material of lithium iron phosphate new energy power battery
T/QGCML 1155-2023 Ferrite permanent magnet material wet pressing magnetic field forming fully automatic hydraulic machine
T/QGCML 1219-2023 Ferrite permanent magnet material wet pressing magnetic field forming fully automatic hydraulic machine
T/ESD 2005-2022 Measurement method for fractional voltage of planar materials
T/ICMTIA 1-2019 The Integrated Circuit Materials Industry Technology Innovative Alliance—Gas base specification
T/CNEA 101.17-2021 PWR pressure boundary components—Material— Part 17:Hot-rolled and cold-finished age-hardening stainless steel bars and shapes
T/CNEA 101.25-2021 PWR pressure boundary components—Material— Part 25:General Requirements of rolled structural bars, plates, shapes, and sheet pilings
T/QGCML 218-2021 Selection of Fireproof Sealing Material for Relay Protection Screen
T/CNS 6-2018 Electrochemistry test method in high temperature high pressure water for metallic materials used in nuclear power plants
T/CNS 18-2020 Test method for galvanic corrosion of metallic materials in high temperature and high pressure water for nuclear power plants

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, New Piezoelectric Materials

GB/T 3388-2002 Designations for types of piezoelectric ceramics
GB/T 9532-2012 Designations for piezoelectric crystals
GB/T 42529-2023 Evaluation Requirements for Moisture Conduction and Phase Change Breathing Function of New Wall Materials
GB/T 42719-2023 Triboelectric voltage detection method for planar materials
GB/T 11320-1989 Test methods for the properties of piezoelectric ceramics material with the low mechanical quality factor
GB 11320-1989 Piezoelectric Ceramic Material Properties Test Method for Low Mechanical Quality Factor Piezoelectric Ceramic Material Properties
GB/T 5237.3-2017(英文版) Wrought aluminium alloy extruded profiles for architecture—Part 3:Electrodeposition coating profiles
GB/T 9532-1988 Designations for LiNbO3,LiTaO3,Bi12GeO20,Bi12SiO20 piezoelectric crystals
GB/T 16528-1996 Zinc oxide ceramics for use in varistors
GB/T 11312-1989 Test methods for SAW properties of piezoelectric ceramics and crystals
GB/T 2413-1980 Piezoelectric ceramic materials--Measuring methods for determination of volume density
GB/T 2413-1981 Piezoelectric ceramic materials--Measuring methods fordetermination of volume and density
GB 2413-1981 Measurement method of bulk density of piezoelectric ceramic materials
GB 2413-1980 Measurement method of bulk density of piezoelectric ceramic materials
GB/T 15750-1995 Test program for the ageing properties of piezoelectric ceramics
GB/T 29311-2012 Electrical insulating materials.A.A.voltage endurance evaluation.Introduction
GB/T 29305-2012 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
GB/T 33377-2016 Non-silicon release liner for flexible PC base film
GB/T 1411-2002/IEC 61621-1997 Dry,solid insulating materials--Resistance test to high-voltage,low-current arc discharges
GB/T 1411-2002/IEC 61621:1997 Dry,solid insulating materials--Resistance test to high-voltage,low-current arc discharges
GB/T 1411-2002 Dry,solid insulating materials--Resistance test to high-voltage,low-current arc discharges
GB/T 15155-1994 Generic specification for piezoelectric ceramic for use in filters
GB/T 11387-1989 Testing methods for static flexural strength of piezoelectric ceramics
GB/T 1550-1997 Standard methods for measuring conductivity type of extrinsic semiconducting materials
GB/T 3389.8-1986 Test methods for the properties of piezoelectric ceramics--Test for the pyroelectric coefficient
GB/Z 28818-2012 Selection guide for polymeric materials for outdoor use under HV stress
GB/T 3389.2-1999 Test methods for the properties of piezoelectric ceramics. Static test for piezoelectric strain constant d33
GB/T 30142-2013 Measuring methods for shielding effectiveness of planar electromagnetic shielding materials
GB/T 11309-1989 Test methods for the properties of piezoelectric ceramics--Quasi-static test for piezoelectric strain constant d33
GB 11309-1989 Piezoelectric ceramic material performance test method quasi-static test of longitudinal piezoelectric strain constant d33
GB/T 3389.7-1986 Test methods for the properties of piezoelectric ceramics--Test for dielectric properties in high electric field
GB/T 16304-2008 Test methods of the properties for piezoelectric ceramics.Test for relation between electric field and strain

Standard Association of Australia （SAA）, New Piezoelectric Materials

AS 4586:2013
AS 4024.3002:2009
AS/NZS 3008.1.2:2010
AS 4024.3001:2009
AS/NZS 3008.1.2:2017 Electrical installations — Selection of cables, Part 1.2: Cables for alternating voltages up to and including 0.6/1 kV — Typical New Zealand conditions
AS/NZS 1429.1:2006 Electric cables - Polymeric insulated - For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV
AS/NZS 3008.1.2:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions

GM Holden Ltd, New Piezoelectric Materials

HOLDEN HN 2424-2003 DEADENER PATCH - PRESSURE SENSITIVE
HOLDEN HN 0216-2012 Compression and Recovery of Automotive Textile Materials Do Not Use on New Programs, No Replacement. Limited for current use

U.S. Military Regulations and Norms, New Piezoelectric Materials

ARMY A-A-52518 VALID NOTICE 1-2004 TIRE, PNEUMATIC: RETREAD AND REPAIR MATERIALS (METRIC)
ARMY A-A-52518-1995 TIRE, PNEUMATIC: RETREAD AND REPAIR MATERIALS (METRIC)
ARMY MIL-P-43038 B VALID NOTICE 5-2013 Plastic Molding Material, Polyester, Low-Pressure Laminating, High Temperature Rresistant
ARMY MIL-P-43038 B REINST NOTICE 3-2000 PLASTIC MOLDING MATERIAL, POLYESTER, LOW-PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT
ARMY MIL-P-46185 NOTICE 3-1998 PLASTIC MOLDING AND EXTRUSION MATERIALS, POLYETHERSULFONE
ARMY MIL-P-46185 VALID NOTICE 2-1989 PLASTIC MOLDING AND EXTRUSION MATERIALS, POLYETHERSULFONE
ARMY MIL-P-46185-1983 PLASTIC MOLDING AND EXTRUSION MATERIALS, POLYETHERSULFONE
ARMY MIL-P-46183 VALID NOTICE 1-2004 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK)
ARMY MIL-P-46183 (2)-1999 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK)
ARMY MIL-P-46183-1984 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK)
ARMY MIL-D-435 F NOTICE 1-1998 DISTRIBUTORS, LIQUID BITUMINOUS MATERIAL, TANKLESS-TYPE, TRAILER-MOUNTED
ARMY MIL-D-435 F (4)-1988 DISTRIBUTORS, LIQUID BITUMINOUS MATERIAL, TANKLESS-TYPE, TRAILER-MOUNTED
ARMY MIL-D-435 F-1985 DISTRIBUTORS, LIQUID BITUMINOUS MATERIAL, TANKLESS-TYPE, TRAILER-MOUNTED

IN-BIS, New Piezoelectric Materials

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., New Piezoelectric Materials

ASHRAE KC-03-11-4-2003 A New Mass Transfer Based Model of VOC Emissions from Building Materials

CH-SNV, New Piezoelectric Materials

British Standards Institution (BSI), New Piezoelectric Materials

BS EN 61212-3-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated rolled tubes
BS PD IEC/TR 60893-4:2014 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
BS EN 60893-3-1:2012 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Types of industrial rigid laminated sheets
BS 7414:1991 Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B
BS ISO 23930:2023 Fibre-reinforced plastic composites. Full-section compressive test for pultruded profiles
BS EN 17271:2019 Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the peel strength of profiles laminated with foils
PD CEN/TR 17603-32-05:2022 Space engineering. Structural materials handbook. New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints
DD IEC/TS 61994-4-2:2011 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary - Piezoelectric and dielectric materials. Piezoelectric ceramics
BS EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
BS CWA 15627:2007 Small punch test method for metallic materials
BS DD IEC/TS 61994-4-3:2008 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Materials - Materials for dielectric devices
BS EN 61212-3-3:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded rods
BS EN 61212-3-2:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded tubes
BS EN 60893-3-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for types of industrial rigid laminated sheets
22/30420635 DC BS ISO 23930. Fibre-reinforced plastic composites. Full section compression test for pultruded profiles
BS EN 62047-10:2011 Semiconductor devices. Micro-electromechanical devices. Micro-pillar compression test for MEMS materials
22/30445226 DC BS EN ISO 293. Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 293:2023 Tracked Changes. Plastics. Compression moulding of test specimens of thermoplastic materials
BS 7808:1995 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
BS 2898:1970 Specification for wrought aluminium and aluminium alloys for electrical purposes. Bars, extruded round tube and sections
BS EN 60641-3-2:2008 Pressboard and presspaper for electrical purposes - Specifications for individual materials - Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, and P.6.1
DD IEC/TS 61994-4-3:2008 Piezoelectric and dielectric devices for frequency control and selection. Glossary - Materials. Materials for dielectric devices
BS EN 61234-2:1998 Method of test for hydrolytic stability of electrical insulating materials. Moulded thermosets
BS EN 60076-14:2013 Power transformers. Liquid-immersed power transformers using high-temperature insulation materials
BS EN 61212-3-1:1996 Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated rolled tubes
BS DD IEC/TS 61994-4-2:2011 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary. Piezoelectric and dielectric materials. Piezoelectric ceramics
BS EN 61212-2:2006 Insulating materials — Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes — Part 2: Methods of test
BS EN 61212-3-2:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded tubes
BS EN 61251:2016 Electrical insulating materials and systems. A.C. voltage endurance evaluation
BS EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
BS IEC 62899-202-10:2023 Printed electronics - Materials. Resistance measurement method for thermoformable conducting layer
BS ISO 10059-2:2004 Dense shaped refractory materials - Determination of cold compressive strength - Test with packing
BS EN 60641-3-1:2008 Pressboard and presspaper for electrical purposes -Part 3: Specifications for individual materials - Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1
BS EN 50363-0:2006 Insulating, sheathing and covering materials for low voltage energy cables. General introduction
BS EN 50363-0:2011 Insulating, sheathing and covering materials for low-voltage energy cables. General introduction
BS EN 60763-3-1:2011 Laminated pressboard for electrical purposes. Specifications for individual materials. Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2
BS DD IEC/TS 61251:2008 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
BS EN 61621:1997 Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges
BS EN 61621:1998 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges
BS EN ISO 28941-1:2009 Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 28941-1:2008 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 15103-2:2007 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN 61212-3-2:2013 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Sheet 2: Round laminated moulded tubes
PD IEC TS 61994-4-1:2018 Tracked Changes. Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary. Piezoelectric materials. Synthetic quartz crystal
BS EN 61212-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Definitions, designations and general requirements
BS 7663:1993 Methods of test for determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form
PD IEC/TR 60893-4:2014+A1:2017 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
BS EN 61212-3-1:2013 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Sheet 1: Round laminated rolled tubes
BS PD IEC TS 62836:2020 Measurement of internal electric field in insulating materials. Pressure wave propagation method
BS EN 50324-1:2002 Piezoelectric properties of ceramic materials and components - Terms and definitions
PD IEC/TR 62836:2013 Measurement of internal electric field in insulating materials. Pressure wave propagation method
PD IEC TS 62836:2020 Measurement of internal electric field in insulating materials. Pressure wave propagation method
BS M 42:1972 Methods for non-destructive testing of fusion and resistance welds in thin gauge materials
BS DD IEC/PAS 61249-3-1:2007 Materials for printed boards and other interconnecting structures - Copper-clad laminates for flexible boards (adhesive and non-adhesive types)
BS DD IEC/TS 60076-14:2009 Power transformers. Design and application of liquid-immersed power transformers using high-temperature insulation materials
BS EN 61212-3-3:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods

Ningxia Provincial Standard of the People's Republic of China, New Piezoelectric Materials

DB64/T 1829.1-2022 Ningxia's "six new" industry high-quality development standard system part 1: new materials

Association Francaise de Normalisation, New Piezoelectric Materials

NF L54-128:1974 Hand crimping tool for electrical contacts. Indentors (new types).
NF EN IEC 62677-3-103:2019 Profilés thermorétractables basse et moyenne tensions - Partie 3 : spécification pour matériaux particuliers - Feuille 103 : profilés thermorétractables conducteurs en polyoléfine pour applications moyenne tension
NF EN IEC 62677-3-101:2018 Profilés thermorétractables basse et moyenne tensions Partie 3 : spécification pour matériaux particuliers - Feuille 101 : profilés thermorétractables en polyoléfine pour applications basse tension
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF T56-112:2001 Flexible cellular polymeric materials - Determination of compression set.
NF T56-112/A1:2007 Flexible cellular polymeric materials - Determination of compression set.
NF E63-513:1986 MATERIAL OF MOULDING AND EXTRUSION. METAL MOULD COMPONENTS. SLEEVE EJECTORS.
NF P24-508*NF EN 17271:2019 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils
NF C26-183-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1 : specification for individual materials - Requirements for types of industrial rigid laminated sheets.
NF EN 62770:2014 Fluides pour applications électrotechniques - Esters naturels neufs pour transformateurs et matériels électriques analogues
NF EN 1842:1997 Plastiques - Matières à mouler thermodurcissables (SMC-BMC) - Détermination du retrait au moulage par compression.
NF EN 61251:2016 Systèmes et matériaux isolants électriques - Évaluation de l'endurance à la tension alternative
NF C26-270/A1*NF EN 60450/A1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
NF C26-351*NF EN 61251:2016 Electrical insulating materials and systeme - A.C. voltage endurance evaluation
NF T47-301:1972 Rubber molded and extruded sealing rings and profiles for pipe work. General specifications of materials.
NF EN 61621:1998 Matériaux isolants solides secs - Essai de résistance aux décharges à l'arc haute tension, faible courant.
NF EN 60763-3-1:2011 Cartons comprimés et contrecollés à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 1 : exigences relatives aux cartons précomprimés contrecollés, Types LB 3.1A.1 et 3.1A.2
NF C26-183-1*NF EN 60893-3-1:2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1 : specifications for individual materials - Types of industrial rigid laminated sheets
NF EN 60893-3-1:2013 Matériaux isolants - Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 3-1 : spécifications pour matériaux particuliers - Types de stratifiés industriels rigides en planches
NF E63-515:1987 MATERIAL OF MOULDING AND EXTRUSION. METAL MOULD COMPONENTS. BLADE EJECTORS.
NF C26-270*NF EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
NF EN 61234-2:1998 Matériaux isolants électriques - Méthodes d'essai concernant la stabilité hydrolytique - Partie 2 : matériaux thermodurcissables moulés.
NF F58-501:1993 Railway track construction and maintenance plant. Levelling and layout maintenance of tracks. Tamping, trimming and re-stocking heavy mechanical.
NF C26-183-5/A1*NF EN 60893-3-5/A1:2009 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5 : Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
NF EN 50525-2-82:2012 Câbles électriques - Câbles d'énergie basse tension de tension assignée au plus égale à 450/750 V (U0/U) - Partie 2-82 : câbles pour applications générales - Câbles pour guirlandes lumineuses isolés en matériau élastomère réticulé
NF C26-166-3-2*NF EN 61212-3-2:2013 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : round laminated moulded tubes
NF C26-183-2/A1*NF EN 60893-3-2/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins
NF EN 60076-14:2014 Transformateurs de puissance - Partie 14 : transformateurs de puissance immergés dans du liquide utilisant des matériaux isolants haute température
NF C26-132-3-1*NF EN 60763-3-1:2011 Laminated pressboard for electrical purposes - Part 3 : specifications for individual materials - Sheet 1 : requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB 3.1A.2
NF P98-240-1:1993 Road testing. Measurement of the rate of hydraulic binders and additives in the cementitious materials. Part 1 : chemical method for the determination of the cement content in a new mixed material.
XP E68-004:2019 Equipements de fabrication des produits en matériaux composites - Outillage de moulage appliqué aux procédés de thermocompression, thermoestampage et compression SMC - Cahier des charges
NF EN 60450/A1:2007 Mesure du degré de polymérisation moyen viscométrique des matériaux isolants cellulosiques neufs et vieillis à usage électrique
NF EN 60450:2004 Mesure du degré de polymérisation moyen viscométrique des matériaux isolants cellulosiques neufs et vieillis à usage électrique
NF J24-010:1957 Shipbuilding. Flexible piping. General table. Diameters. Materials. Types of joint. Applications. Pressures.
NF C26-287*NF EN 61621:1998 Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges.

Jiangsu Provincial Standard of the People's Republic of China, New Piezoelectric Materials

DB32/T 3378-2018 New wall material production enterprise laboratory management specification

Anhui Provincial Standard of the People's Republic of China, New Piezoelectric Materials

DB34/T 3969-2021 New wall material production enterprise laboratory management specification

International Electrotechnical Commission (IEC), New Piezoelectric Materials

IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applicatio
IEC 60450:2004/AMD1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials; Amendment 1
IEC 49/855/CD:2009 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
IEC 49/910/CD:2010 Piezoelectric, dielectric and electrostatic and associated materials for frequency, control, selection and detection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
IEC 60893-3-1:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials; Requirements for types of industrial rigid laminated sheets
IEC 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheet
IEC TS 61251:2008 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction
IEC TS 61994-4-1:2018 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal
IEC TS 61994-4-1:2018 RLV Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal
IEC 60450:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC TR 60893-4:2014/AMD1:2017 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2014 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2003 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2014+AMD1:2017 CSV Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC 61251:2015 Electrical insulating materials and systems - AC voltage endurance evaluation
IEC 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
IEC 60450:2004+AMD1:2007 CSV Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC TR2 61251:1993 Electrical insulating materials; A.C. voltage endurance evaluation; introduction
IEC 61621:1997 Dry, solid insulating materials - Resistance test to high-voltage, low current arc discharges
IEC TS 61994-4-2:2003 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
IEC TS 61994-4-2:2011 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
IEC 60076-14:2013 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
IEC 60763-3-1:2010 Laminated pressboard for electrical purposes - Part 3: Specification for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and 3.1A.2
IEC TS 61994-4-4:2018 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-4: Piezoelectric materials - Single crystal wafers for s
IEC TS 61994-4-4:2018 RLV Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-4: Piezoelectric materials - Single crystal wafers for s
IEC TR 62836:2013 Measurement of internal electric field in insulating materials - Pressure wave propagation method
IEC TS 62836:2020 Measurement of internal electric field in insulating materials - Pressure wave propagation method
IEC 61212-3-2:2006 Insulating materials - Industrial rigid round lamineted tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
IEC 61212-3-2:2013 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
IEC 60404-8-8:2017 Magnetic materials - Part 8-8: Specifications for individual materials - Thin electrical steel strip and sheet for use at medium frequencies

Professional Standard - Aviation, New Piezoelectric Materials

HB/Z 326-1998 Composite molding process
HB/Z 305-1997 Composite autoclave molding process
HB/Z 350-2001 Composite resin transfer molding (injection) molding process

PL-PKN, New Piezoelectric Materials

PN C89011-1992 Plastics. Compression moulding test specimens of thermoplasticmaterials
PN E04441-1974 Solid insulating materials Testing of high-voltage, low-current arc resistance
PN C99220-02-1988 Materials for registration (recording) Heat sensitive paper for electrocardiography type EKG-30

CZ-CSN, New Piezoelectric Materials

CSN 64 0206-1976 Compression moulding test specimens f thermoaetting materials
CSN ISO 293:1992 Plastics. Compresion moulding test specimens of thermoplastic materials
CSN 64 0207-1979 Compression moulding est specimens oí thermo- lastics materials. eneral conditions
CSN 34 6471-1986 Test methods for electric insulating materials. Test method for determination of resistance insulating materials to high-voltage arc
CSN 72 5015-1982 Testing of ceramic electrotechnic materials. Definítion of the compressive strength
CSN 34 6511-1988 Clad laminated insulating materials for printed circuits. Types, dimensions, specifications
CSN 34 6467-1986 Test method for determination of resistance of insulating materials to low-voltage, high-current d.c. arc

RO-ASRO, New Piezoelectric Materials

SR ISO 295:1994 Plastics Compression moulding of test specimens of termosetting materials
STAS 10289-1982 Solid electroinsulating materials THERMOSETTING LAMINATED MATERIALS Test methods
STAS 7144/1-1985 Electrical insulating materials THERM06ETTING LAMIXATED SHEETS Types and dimensions
STAS 6415/1-1990 Solid electric insulating materials. Determination of low voltage arc resistance in direct current
STAS 10624-1988 Electric welding by pressure SPECIFICATIONS FOR MATERIALS USED FOR CONTACT ELECTRODS AND ANCILLARY EQUIPMENTS

Danish Standards Foundation, New Piezoelectric Materials

DS/EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
DS/EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
DS/EN 60450/A1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
DS/EN 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets
DS/ISO 15853:2000 Thermoplastics materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
DS/EN 60893-3-1:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets
DS/EN 61212-3-3:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
DS/EN 60763-3-1:2011 Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2
DS/EN 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
DS/IEC TS 62836:2020 Measurement of internal electric field in insulating materials – Pressure wave propagation method
DS/EN 61621:1998 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc dischargers
DS/IEC/TR 62836:2013 Measurement of internal electric field in insulating materials - Pressure wave propagation method
DS/HD 631.2 S1:2008 Electric cables - Accessories - Material characterisation - Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications

Indonesia Standards, New Piezoelectric Materials

SNI ISO 295:2011 Plastics - Compression moulding of test specimens of thermosetting materials
SNI IEC 60076-14:2016 Transformator daya – Bagian 14: Transformator daya terendam cairan menggunakan bahan insulasi suhu tinggi

American Society of Mechanical Engineers (ASME), New Piezoelectric Materials

ASME SEC III D1 MA APP IV-2001 Appendix IV Approval of New Materials Under the ASME Boiler and Pressure Vessel Code
ASME SEC II B MA APP 2-2002 Appendix 2 - Guideline on the Approval of New Materials Under the ASME Boiler and Pressure Vessel Code
ASME SEC VIII D3 NMA APP F-2002 Appendix F - Nonmandatory Approval of New Materials Under the ASME Boiler and Pressure Vessel Code
ASME SEC II D APPENDIX 5-2003 Appendix 5 Guideline on the Approval of New Materials Under the ASME Boiler and Pressure Vessel Code
ASME SEC II A MA APP 2-2002 Appendix 2 - Mandatory Guideline on the Approval of New Materials Under the ASME Boiler and Pressure Vessel Code

ACI - American Concrete Institute, New Piezoelectric Materials

ACI SP-312-2016 Novel Characterization Techniques and Advanced Cementitious Materials: Tribute to James J. Beaudoin

German Institute for Standardization, New Piezoelectric Materials

DIN EN 61212-3-2:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes (IEC 61212-3-2:2006); German version EN
DIN EN 61212-3-3:2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods (IEC 61212-3-3:2006); German version EN
DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN 51911:2020 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN 51911:2020-12 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN EN 17271:2019-09 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils; German version EN 17271:2019
DIN 51919:1999 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method; solid materials
DIN 51919:2013 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 51919:2013-05 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN EN 17271:2019 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils
DIN VDE 0312:1959 Rules for testing methods for laminates; vulcanized fibres for electrical engineering
DIN EN ISO 293:2023 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
DIN IEC/TS 61994-4-2:2012-05*DIN SPEC 41994-4-2:2012-05 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics (IEC/TS 61994-4-2:2011)
DIN 65113:1990 Aerospace; bars and extruded profiles of aluminium and wrought aluminium alloys; technical specification; inactive for new design
DIN EN 60454-3-1:2002 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: PVC film tapes with pressure-sensitive adhesive (IEC 60454-3-1:1998 + A1:2001); German version EN 60454-3-1:1998 + A1:2001
DIN 51911:1997 Testing of carbon materials - Determination of specific electrical resistance by the current-voltage method - Solid matters
DIN VDE 0303-5:1990 Testing of electrical insulating materials; low voltage; high current arc resisting test
DIN IEC/TS 61994-4-2:2012 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics (IEC/TS 61994-4-2:2011)
DIN EN 60450:2008 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004 + A1:2007); German version EN 60450:2004 + A1:2007
DIN IEC/TR 60893-4:2018 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values (IEC/TR 60893-4:2014 + A1:2017)
DIN EN 12576:1998-09 Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC; German version EN 12576:1998
DIN EN 61061-3-1:1999 Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Sheets produced from beech veneer (IEC 61061-3-1:1998); German version EN 61061-3-1:1998
DIN 16941:2012-11 Thermoplastics extruded profiles - General tolerances of size, form and orientation
DIN EN ISO 293:2023-10 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN 41300-1:1979 Small transformers - Characteristic data, M, EI, SM and SE cores (EI-type with small waste of material)
DIN EN 61621:1999 Dry, solid insulating materials - Resistance test to high-voltage, low-current arc discharges (IEC 61621:1997); German version EN 61621:1997
DIN 16941:1986 Thermoplastics extruded profiles; general tolerances of size, form and orientation
DIN VDE 0441-1:1985 Tests on insulators of organic material for systems with nominal alternating voltages greater than 1000 V; tests on materials

IT-UNI, New Piezoelectric Materials

U.S. Air Force, New Piezoelectric Materials

AIR FORCE MIL-HDBK-1547 A-1998 ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE AND LAUNCH VEHICLES

HU-MSZT, New Piezoelectric Materials

工业和信息化部, New Piezoelectric Materials

HG/T 5752-2020 Facade (embossed) release materials for adhesive tapes
YS/T 728-2016 Acrylic electrophoretic coating for aluminum alloy building profiles

ES-UNE, New Piezoelectric Materials

UNE-EN IEC 62677-3-103:2019 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications (Endorsed by Asociación Española de Normalizaci...
UNE-EN 17271:2020 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils
UNE-EN IEC 62677-3-102:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications (Endorsed by Asociación Española de Normaliz...
UNE-CEN/TR 17603-32-05:2022 Space engineering - Structural materials handbook - Part 5: New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets (Endorsed by AENOR in November of 2012.)
UNE-EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications (Endorsed by Asociación Española de Normalización in May of 2...
UNE-EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation (Endorsed by AENOR in April of 2016.)
UNE-EN 60763-3-1:2011 Laminated pressboard for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and 3.1A.2 (Endorsed by AENOR in May of 2011.)

未注明发布机构, New Piezoelectric Materials

DIN EN ISO 293:2003 Plastics — Compression molding test specimens of thermoplastic materials
BS 7414:1991(1999) Specification for White PVC - U extruded hollow profiles with heat welded corner joints for plastics windows : materials type B
BS EN 60450:2004(2007) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

CU-NC, New Piezoelectric Materials

NC 09-207-1985 Material Forming. Screw Presses, Accuracy Control Methods
NC 54-211-1986 Construction Materials and Products. Pressure SteelCylinder-Type Concrete Pipe. Quality Specifications

ES-AENOR, New Piezoelectric Materials

Canadian Standards Association (CSA), New Piezoelectric Materials

CSA N285.0/N285.6 SERIE-2012 Exigences générales relatives aux systèmes et aux composants sous pression des centrales nucléaires CANDU/Normes sur les matériaux des composants de réacteurs des centrales nucléaires CANDU (Deuxième édition; Mise à jour no 2: Septembre 2013; Mise à jour

Professional Standard - Medicine, New Piezoelectric Materials

YY/T 0110-1993 Medical ultrasonic electroceramics materials
YY/T 0110-2009 Piezoelectric materials for medical ultrasound

Institute of Interconnecting and Packaging Electronic Circuits (IPC), New Piezoelectric Materials

IPC TM-650 2.4.23-1979 Soldering Resistance of Laminate Materials

IPC - Association Connecting Electronics Industries, New Piezoelectric Materials

IPC TM-650 2.5.7B-1987 Dielectric Withstanding Voltage@ Printed Wiring Material

Lithuanian Standards Office , New Piezoelectric Materials

LST EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
LST EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
LST EN 60893-3-1-2013 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets (IEC 60893-3-1:2012)
LST EN 60450-2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004)
LST EN 60450-2004/A1-2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004/A1:2007)
LST EN 61212-3-3-2007 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods (IEC 61212-3-3:2006)
LST HD 631.2 S1-2008 Electric cables - Accessories - Material characterisation - Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications
LST EN 61621-2001 Dry solid insulating materials. Resistance test to high-voltage, low-current arc discharges (IEC 61621:1997)
LST EN 60893-3-1-2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3-1: Specifications for individual materials. Requirements for types of industrial rigid laminated sheets (IEC 60893-3-1:2003)

AENOR, New Piezoelectric Materials

UNE-EN ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
UNE-EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
UNE-EN 60450:2005 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
UNE-IEC/TR 60893-4:2005 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
UNE-EN 60450:2005/A1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004/A1:2007).
UNE-EN 60076-14:2014 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
UNE-EN 61621:1998 DRY, SOLID INSULATING MATERIALS. RESISTANCE TEST TO HIGH-VOLTAGE, LOW-CURRENT ARC DISCHARGES.

International Organization for Standardization (ISO), New Piezoelectric Materials

ISO 23930:2023 Fibre-reinforced plastic composites — Full-section compressive test for pultruded profiles
ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement

Professional Standard - Energy, New Piezoelectric Materials

NB/T 20240-2013 Physical start-up test after refueling of PWR nuclear power plant
NB/T 20184-2012 General specification on transport vessel for fresh fuel assembly of PWR nuclear power plants
NB/T 20141-2012 Packaging, transportation, loading & unloading and storage of fresh fuel assembly for PWR nuclear power plant
NB/T 20565-2019 Zirconium alloy bars and wires for fuel assembly for pressurized water reactor nuclear power plants
NB/T 20341-2015 Technical specification for nuclear island building hole blocking material and caulking material of PWR nuclear power plants
NB/T 20578-2019 Zirconium Alloy Strip for Fuel Assembly of PWR Nuclear Power Plant

Professional Standard - Electron, New Piezoelectric Materials

SJ/T 11182-1998 General specifications of hydraulic molding equipment for wet magnetic materials
SJ/T 11743.4.3-2019 Piezoelectric and dielectric devices for frequency control and selection – Glossary – Part 4-3: Materials – Materials for dielectric devices（IEC/TS 61994-4-3：2008，IDT）
SJ/T 11743.4.2-2019 Piezoelectric and dielectric devices forfrequency control and selection – Glossary –Part 4-2: Materials – Piezoelectric ceramics（IEC/TS 61994-4-2:2011,Piezoelectric, dielectric and electrostatic devices and associated materials for frequen...
SJ/T 11743.4.4-2019 Piezoelectric and dielectric devices for frequency control and selection – Glossary – Part 4-4: Materials – Materials for surface acoustic wave (SAW) devices（IEC/TS 61994-4-4：2010，IDT）
SJ/T 11469-2014 Test methods for the piezoelectric properties of ceramics shear piezoelectric strain constant d<下标15> testing on quasi-static principle

American Society for Testing and Materials (ASTM), New Piezoelectric Materials

ASTM D6108-18 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
ASTM D6108-19 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
ASTM D6108-13 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
ASTM D1248-04 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
ASTM D1248-00a Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
ASTM D1248-02 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
ASTM D1825-92(1997) Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
ASTM D1825-92(2002) Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
ASTM D3275-05 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
ASTM D3275-18 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
ASTM D5990-00 Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK)
ASTM D3159-10 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
ASTM D2133-66(1972) Standard Specification For Acetal Resin Injection Molding And Extrusion Materials
ASTM D2133-81 Standard Specification For Acetal Resin Injection Molding And Extrusion Materials
ASTM D6112-10 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D1389-97a Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM B613-76(2012) Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ASTM D6112-13 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D1825-03 Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
ASTM B317/B317M-07(2015) Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
ASTM B317/B317M-07(2015)e1 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
ASTM D6112-97 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D6112-18 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D5990-20 Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
ASTM D5990-20a Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
ASTM D1389-07 Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ASTM D6112-97(2005) Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

National Association of Corrosion Engineers (NACE), New Piezoelectric Materials

NACE RP0188-1999 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates
NACE SP0188-2006 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates Item No. 21038
NACE 8X194-2006 Materials and Fabrication Practices for New Pressure Vessels Used in Wet H2S Refinery Service (Item No. 24179)

Professional Standard - Non-ferrous Metal, New Piezoelectric Materials

YS/T 780-2011 Aluminum alloy extruded profiles used for motor shell
YS/T 728-2010 Acrilic eletrodeposition paint for aluminium alloy extruded profiles for architecture

Professional Standard-Ships, New Piezoelectric Materials

CB/Z 165-1979 Measurement method of isostatic piezoelectric strain constant dH for piezoelectric ceramic materials
CB 1125-1998 Specification for peizoelectric ceramic material of underwater sound
CB/Z 166-1979 Measurement method of volume resistivity ρv of piezoelectric ceramic materials
CB/Z 162-1979 Measurement method of linear expansion coefficient a1 of piezoelectric ceramic materials
CB/T 3794-2014 Test methods for the properties of piezoelectric ceramics.Test for electrode joint strength

AT-ON, New Piezoelectric Materials

ONORM C 9720 Teil.3-1981 Reinforced plastics; Laminates of glass fibre reinforced reaction moulding materials; Designation
ONORM E 6545-2-1995 Electrical installation material - Pliable self recovering conduits of insulating material for medium mechanical stress - Corrugated type, non flame propagating
ONORM E 6545-1-1995 Electrical installation material - Pliable self recovering conduits of insulating material for medium mechanical stress -Piain type, non flame propagating

Korean Agency for Technology and Standards (KATS), New Piezoelectric Materials

KS C 2127-1996 Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C IEC 61251:2002 Electrical insulating materials－A.C. voltage endurance evaluation－Introduction
KS C 2105-2003 Testing methods for electric strengthof solid insulating materials
KS C 2127-1996(2021) Testing method for proof-voltage testing of thin solid electrical insulating materials
KS C 2105-1982 Testing methods for electric strengthof solid insulating materials
KS C 2130-1996 Testing method for high-voltage, low-current, dry arc resistance of solid electrical insulation
KS C IEC 61251:2019 Electrical insulating materials and systems — AC voltage endurance evaluation
KS C 2130-1996(2016) Testing method for high-voltage, low-current, dry arc resistance of solid electrical insulation
KS C IEC 61621:2014 Dry, solid insulating materials — Resistance test to high-voltage, low-current arc discharges
KS W 1126-2003 Core material, plastic honeycomb, laminated glass fabric base,for aircraft structural and electronic applications
KS C 2131-1996 Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials
KS C 2131-1996(2016) Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials
KS C IEC 61621-2014(2019) Dry, solid insulating materials — Resistance test to high-voltage, low-current arc discharges
KS M ISO 1874-1:2013 PLASTICS — POLYAMIDE(PA) MOULDING AND EXTRUSION MATERIALS — PART 1: DESIGNATION
KS M ISO 1874-1:2008 Plastics-Polyamide(PA) moulding and extrusion materials-Part 1:Designation system and basis for specifications
KS C IEC 61212-3-2:2019 Insulating materials — Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes —Part 3: Specifications for individual materials —Sheet 2: Round laminated
KS C 2131-1996(2021) Testing method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials
KS L ISO 10059-2:2013 Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
KS C IEC 61249-3-1:2012 Materials for printed boards and other interconnecting structures－Part 3-1：Copper-clad laminates for flexible boards (Adhesive and non-adhesive types)

Society of Automotive Engineers (SAE), New Piezoelectric Materials

SAE AS81531-1998 Marking of Electrical Insulating Materials FSC 6145; Should be Used for New Design Instead of MIL-M-81531, Which Was Inactivated for New Design on September 30, 1998
SAE J515-2022 Specification for O-Ring Materials Used with Hydraulic Connectors
SAE AMS-R-83283-1998 Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
SAE AMS-R-83283A-2014 Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
SAE AMS-QQ-A-200/14-1997 Aluminum Alloy, Bar, Rod, Shapes, and Wire, Extruded, 7178-T76 Improved Exfoliation Resistance UNS A97178
SAE AMS-QQ-A-200/15A-1998 Aluminum Alloy Bar, Rod, Shapes, Extruded, 7075-T76 Improved Exfoliation Resistance UNS A97075
SAE AS33671B-2001 Strap, Tiedown, Electrical Components, Adjustable, Self-Clinching, Plastic, Type I, Class 1 FSC 5975; Should Be Used for New Design Instead of MS3367, Which Was Inactivated for New Design on August 25, 1998
SAE AMS-R-25988A-2017 Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes

CEN - European Committee for Standardization, New Piezoelectric Materials

EN 17271:2019 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils
PREN 17271-2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils
EN ISO 1874-2:2006 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (Incorporates Amendment A1: 2010)

SAE - SAE International, New Piezoelectric Materials

SAE J515-1990 Specification for O-Ring Materials Used with Hydraulic Connectors
SAE J515-1997 Specification for O-Ring Materials Used with Hydraulic Connectors
SAE J515-1992 Hydraulic O-Ring@ Standard (June 1992)
SAE J515-1989 "Hydraulic ""O"" Ring"
SAE J515-2015 Specification for O-Ring Materials Used with Hydraulic Connectors

European Committee for Electrotechnical Standardization（CENELEC）, New Piezoelectric Materials

EN 62047-10:2011 Semiconductor devices - Micro-electromechanical devices - Part 10: Micro-pillar compression test for MEMS materials
EN 60893-3-1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets
EN 61251:2016 Electrical insulating materials and systems - A.C. voltage endurance evaluation
EN 60763-3-1:2011 Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2
EN 60076-14:2013 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials

European Committee for Standardization (CEN), New Piezoelectric Materials

EN 60893-3-1:2004 Insulating materials — Industrial rigid laminated sheets based on thermosetting resins for electrical purposes — Part 3-1: Specifications for individual materials — Requirements for types of industrial rigid laminated sheets
EN 1815:2016 Resilient and laminate floor coverings - Assessment of static electrical propensity
EN ISO 1874-2:1995 Plastics - Polyamide (PA) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties (ISO 1874-2 : 1995)
EN ISO 1874-2:2012 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

CENELEC - European Committee for Electrotechnical Standardization, New Piezoelectric Materials

EN 60893-3-1:1994 Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Types of Industrial Rigid Laminated Sheets
HD 631.2 S1-2007 Electric cables - Accessories - Material characterisation - Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications

YU-JUS, New Piezoelectric Materials

JUS N.A5.130-1984 Testitng of insulating materials for electrical purposes. Method of testing the resistance of insulating materials to tow voltage electric are

Professional Standard - Building Materials, New Piezoelectric Materials

JC/T 2025-2010 Lead magnesium niobate titanate (PMNT) piezoelectric single crystals

General Motors do Brasil, New Piezoelectric Materials

GMSA LTP .PE.118-2011 Procedure for determining blocking characteristics of vinyl and trim materials Determina莽茫o da caracter铆stica de colamento de superf铆cie de pl谩sticos laminados e materiais similares Do Not use on New Programs; No Replacement

GM North America, New Piezoelectric Materials

GM GM6243M-2010 Label, Pressure Sensitive, for Glass (Issue 6; Do Not Use on New Programs; Replaced by GMW14573)
GM GM9144P-2001 Resistance to Arcing or Charring of Dielectrically Embossed Materials
GM GM7474M-2014 Glass Fiber Reinforced Polyester / Balsa Wood Composite Laminate (Issue 2; Do Not Use on New Programs; Replaced by GMW17005)
GM4359P-2010 Cycle ?Immersion Corrosion Test for Stainless Steel Molding Materials Issue 2; Do Not Use on New Programs; Replaced by GMW15283

Professional Standard - Nuclear Industry, New Piezoelectric Materials

EJ/T 608-1991 General specifications for transport containers for new fuel assemblies in pressurized water reactor nuclear power plants
EJ/T 817-1994 Regulations on packaging, transportation, handling and storage of new fuel assemblies in pressurized water reactor nuclear power plants
EJ/T 1126-2000 Specification for safety - class. 2 bolting material used in pressure vessel for pressurized water reactor nuclear power plants

GM Europe, New Piezoelectric Materials

GME TM 945300-1996 Verbundwerkstoff formgepre遲, f黵 Formhimmel Compression Molded Composite Material for Formed Headliners English/German
GME TM 942500-2013 Compression Molded Composite Material for Formed Headliners, Substrate based on Glass Fibres
GME TM 949100-2013 Compression Molded Composite Material for Formed Headliners, Substrate made of Polyurethane Foam

国家市场监督管理总局、中国国家标准化管理委员会, New Piezoelectric Materials

GB/T 24523-2020 Metallic materials—Test method for rapid indentation (Brinell type) hardness testing
GB/T 29311-2020 Electrical insulating materials and systems—AC voltage endurance evaluation
GB/T 1550-2018 Test methods for conductivity type of extrinsic semiconducting materials
GB/T 1094.14-2022 Power transformers—Part 14: Liquid-immersed power transformer using high-temperature insulation materials
GB/T 39494-2020 Determination for coating adhesion of rare earth permanent magnetic materials for drive motor of new energy vehicle

US-AAMA, New Piezoelectric Materials

AAMA 312-2014 Voluntary Specification for the Lamination of Wood and Cellulosic Composite Materials Intended for Use on AAMA Certified Profiles
AAMA 307-2011 Voluntary Performance Requirements and Test Procedures for Laminates Intended for Use on AAMA Certified Profiles

Professional Standard - Textile, New Piezoelectric Materials

FZ/T 01043-1996 Determination of dynamic static voltage for electrostatic properties of textile materials
FZ/T 01042-1996 Determination of electrostatic half-life of electrostatic properties of textile materials

GOSTR, New Piezoelectric Materials

GOST R 57785-2017 Polymer composites. Prepregs and premixes. Determination of compression moulding shrinkage

SE-SIS, New Piezoelectric Materials

SIS SEN 04 05 53
SIS SS 11 01 52-1985 Metallic materials - Pressure vessel steel - Sampling for impact testing (V-notch)
SIS SS IEC 454:1987 Insulating materials - Specifications for pressure-sensitive adhesive tapes for electrical purposes
SIS SEN 24 02 50-1968 Rubber and thermoplastic insulaled cords and cables Heavy tough rubber sheathed and heavy polychloroprene sheathed flexible cables. Type RDVT and RDOT
SIS SEN 24 02 41-1968 Rubber and thermoplastic insulated cords and cables Light PVC-insulated and PVC-sheathed flexible cords Type SKK and SKX

NZ-SNZ, New Piezoelectric Materials

AS/NZS 4586:2004 Slip Resistance of Classification of New Pedestrian Surface Materials (Supersedes AS/NZS 3661.1: 1993; Amendment 1: 02/14/2005)

TR-TSE, New Piezoelectric Materials

TS 2293-1976 P L A STIC S METHOD OF TEST FOR HIGH - VOLTAGE - LOW CURRENT DRY ARC RESISTANCE OF SOLID ELECTRICAL INSULATION

Malaysia Standards, New Piezoelectric Materials

MS 1540-2002

RU-GOST R, New Piezoelectric Materials

GOST 6433.2-1971 Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages
GOST 6433.3-1971 Solid electrical insulating materials. Methods for evaluation of electrical strength at a. c. voltage at power (50 Hz) frequency and d. c. voltage
GOST 27380-1987 Section electrical insulating fiber-glass reinforced plastics. General specifications
GOST 33367-2015 Polymer composites. Production of plates by compression moulding of prepregs and premixes for preparation of test specimens
GOST 25045-1981 Electrical insulating materials with chips mica. General specifications
GOST 10345.2-1978 Solid electroinsulating materials. Method for the determination of arc resistance of direct current of low voltage
GOST 10345.1-1978 Solid electroinsulating materials. Method for the determination of arc resistance of alternating voltage greater than 1000 V

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., New Piezoelectric Materials

IEEE 402-1974 Guide for Measuring Resistivity of Cable-Insulation Materials at High Direct Voltages

BR-ABNT, New Piezoelectric Materials

ABNT NBR 8117-2011 Aluminum and its alloys - Wire, rods, profiles and extruded tubes - Requirements

IEC - International Electrotechnical Commission, New Piezoelectric Materials

TS 61251-2008 Electrical insulating materials – A.C. voltage endurance evaluation – Introduction (Edition 2.0)
TS 61994-4-3-2008 Piezoelectric and dielectric devices for frequency control and selection – Glossary – Part 4-3: Materials – Materials for dielectric devices (Edition 1.0)
TS 61994-4-1 (REDLINE + STANDARD)-2018 Piezoelectric@ dielectric and electrostatic devices and associated materials for frequency control@ selection and detection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal (Edition 3.0)
TS 61994-4-1-2018 Piezoelectric@ dielectric and electrostatic devices and associated materials for frequency control@ selection and detection - Glossary - Part 4-1: Piezoelectric materials - Synthetic quartz crystal (Edition 3.0)

KR-KS, New Piezoelectric Materials

KS C IEC 61251-2019 Electrical insulating materials and systems — AC voltage endurance evaluation
KS C IEC 61212-3-2-2019 Insulating materials — Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes —Part 3: Specifications for individual materials —Sheet 2: Round laminated

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, New Piezoelectric Materials

GB/T 34938-2017 General technical requirements for planar electromagnetic shielding materials

DE-GPVA, New Piezoelectric Materials

AD 2000-Merkblatt N2-2000 Pressure vessels made of non-metallic materials.Pressure vessels made of electro-graphite and hard burned carbon

PT-IPQ, New Piezoelectric Materials

NP 159-1963 Matériel pour installations électriques & basse tension. Tubes rigides em material plastiquo pour prctection des conducteurs

American National Standards Institute （ANSI), New Piezoelectric Materials

ANSI/ASTM D2303:2013 New Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
ANSI/ASTM B613:1976 Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts
ANSI/ASTM D1389:2007 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
ANSI/ASTM D2520:2013 New Standard Test Methods for Complex Permittivity Dielectric Constant of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures of 1650 C

Electrostatic Discharge Association (ESDA), New Piezoelectric Materials

ANSI/ESD STM97.2-2006 Floor Materials and Footwear - Voltage Measurement in Combination with a Person

ESD - ESD ASSOCIATION, New Piezoelectric Materials

STM97.2-2006 FLOOR MATERIALS AND FOOTWEAR - VOLTAGE MEASUREMENT IN COMBINATION WITH A PERSON
STM97.2-1999 Floor Materials and Footwear Voltage Measurement in Combination with a Person

国家能源局, New Piezoelectric Materials

NB/T 20538-2018 Zirconium alloy pipes for fuel cladding in pressurized water reactor nuclear power plants
NB/T 25078-2018 Guidelines for Selection of Metal Materials for Conventional Islands in Pressurized Water Reactor Nuclear Power Plants

Jiangxi Provincial Standard of the People's Republic of China, New Piezoelectric Materials

DB36/T 816-2014 AB3 type hydrogen storage alloy powder for nickel metal hydride battery anode material

Professional Standard-Packaging, New Piezoelectric Materials

BB/T 0082-2019 Packaging material Coated antistatic polyethylene terephthalate (PET) sheet (coil)

CO-ICONTEC, New Piezoelectric Materials

Institute of Electrical and Electronics Engineers (IEEE), New Piezoelectric Materials

IEEE Std 402-1974(R1982) IEEE Guide for Measuring Resistivity of Cable-Insulation Materials at High Direct Voltages
IEEE P1276/D3, October 2018 IEEE Draft Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed Distribution, Power and Regulating Transformers

Japanese Industrial Standards Committee (JISC), New Piezoelectric Materials

JIS C 2135:2011 Dry, solid insulating materials.Resistance test to high-voltage low-current arc discharges