ZH
RU
ES
New Functional Materials
New Functional Materials, Total:147 items.
In the international standard classification, New Functional Materials involves: Construction materials, Electric road vehicles, Elements of buildings, Paint ingredients, Road vehicle systems, Non-ferrous metals, Products of the textile industry, Semiconducting materials, Iron and steel products, Manufacturing forming processes, Medical sciences and health care facilities in general, Paints and varnishes, Refractories, Rubber, Road vehicles in general, Vocabularies, Tunnel construction, Printed circuits and boards, Powder metallurgy, Ceramics, Piezoelectric and dielectric devices, Environmental protection, Raw materials for rubber and plastics, Rubber and plastics products, Plastics, On-board equipment and instruments, Radiation measurements, Protection against fire, Air quality, Hospital equipment, Packaging and distribution of goods in general, Electronic components in general, Medical equipment, Reinforced plastics, Fasteners, Insulating materials.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, New Functional Materials
- GB/T 42529-2023 Evaluation Requirements for Moisture Conduction and Phase Change Breathing Function of New Wall Materials
- GB/Z 32012-2015 New textile materials.Datasheet of chemical properties
- GB/Z 32013-2015 New textile materials.Datasheet of thermal properties
- GB/Z 32009-2015 New textile materials.Datasheet of mechanical properties
- GB/T 32527-2016 Design specification of space materials science experimental facility.Multifunctional high temperature furnace
- GB/T 30142-2013 Measuring methods for shielding effectiveness of planar electromagnetic shielding materials
- GB/T 8763-1988 Test methods of gas absorption characteristic for non-evaporation gettering materials and products
- GB 8763-1988 Test methods of gas absorption characteristic for non-evaporation gettering materials and products
Group Standards of the People's Republic of China, New Functional Materials
- T/ZAMA 1003-2023 Design and testing specifications for new lightweight materials for new energy vehicles
- T/YTQB 0001-2019 Functional color (filler) material
- T/SHDSGY 136-2023 New energy hydrogen fuel cell material technology
- T/CIPR 0012-2023 New energy vehicle skeleton aluminum alloy profile
- T/SHDSGY 135-2023 New Energy Semiconductor Silicon Wafer Material Technology
- T/CADBM 35-2021 Antibacterial functional facing materials for hospitals
- T/CIPR 0012-2022 Aluminum Alloy profiles for New Energy Vehicle Skeleton
- T/GBMEA 01-2023 New low carbon cementitious material used in concrete
- T/SDAS 634-2023 Process specification for directed energy deposition gradient functional materials
- T/ACREI CREIS34005-2022 Rare earth permanent materials for drive motors of new energy vehicles
- T/CBMCA 031-2022 On-site detection method of negative ion functional building materials
- T/CHTS 10060-2022 Technical Guideline for Application of Multifunctional Energy-Storage and Luminescent Materials in Highway Tunnels
- T/CSTM 00789-2023 Tourmaline porous compound material with negative ion function in vehicle
- T/CIPR 0011-2022 Preparation method of high strength aluminum alloy profile for new energy vehicle battery tray
- T/CIPR 0011-2023 Preparation method of high-strength aluminum alloy profile for new energy vehicle battery tray
- T/CSTM 00993-2023 Guidelines for batch consistency evaluation of critical properties of new materials for communication
- T/QGCML 654-2023 Special iron for cathode material of lithium iron phosphate new energy power battery
- T/CBMF 12-2016 The second generation of new dry process cement matching refractory technical acceptance regulations
- T/SQIA 058-2023 Technical requirements for carbon footprint assessment of lithium battery cathode and anode functional materials
FI-SFS, New Functional Materials
Professional Standard - Construction Industry, New Functional Materials
- JG/T 176-2005 Function structure measurement of plastic window/door and profile
- JG/T 176-2015 Functional structural dimensions of plastic doors, windows and profiles
- JG/T 152-2003 Profiles of steel multifunction external doorframe
IETF - Internet Engineering Task Force, New Functional Materials
- RFC 7144-2014 Internet Small Computer System Interface (iSCSI) SCSI Features Update
商务部, New Functional Materials
Military Standard of the People's Republic of China-General Armament Department, New Functional Materials
- GJB 8770-2015 Specification for new thermal insulation materials resistant to thermal radiation
GM North America, New Functional Materials
- GM GM4388M-2001 Exterior Paint Performance Requirements for Approval of New Plastic Materials
- GM4388M-2010 Exterior Paint Performance Requirements for Approval of New Plastic Materials Issue 6; Do Not Use on New Programs; Replaced by GMW16172
- GM GM4388M-2010 Exterior Paint Performance Requirements for Approval of New Plastic Materials (Issue 6; Do Not Use on New Programs; Replaced by GMW16172)
- GM GM6171M-2011 Material and Performance Requirements for Type TR (Thread Rolling) Screws Case Hardened (Issue 3; Do Not Use on New Programs; Replaced by GMW15170; Best Copy Available)
- GM GM6171M-1989 Material and Performance Requirements for Type TR (Thread Rolling) Screws Case Hardened
- GM GM6217M-1989 Material and Performance Requirements for Induction Hardened (Thread Cutting) Tapping Screws Type D Type F Type T
- GM GM6170M-1989 Material and Performance Requirements for Case Hardened (Thread Cutting) Tapping Screws Type D Type F Type T
- GM GM337M-2011 Mechanical Properties and Material Requirements for Cold Formed and Headed Non-Heat Treated Externally Threaded Fasteners (Issue 2; Do Not Use on New Programs; Replaced by GMW25)
- GM GM6202M-2004 Material and Performance Requirements for Induction Hardened Type TR (Thread Rolling) Tapping Screws
- GM GM6170M-2011 Material and Performance Requirements for Case Hardened (Thread Cutting) Tapping Screws Type D Type F Type T (Issue 3; Do Not Use on New Programs; Replaced by ISO 2702)
- GM GM6217M-2011 Material and Performance Requirements for Induction Hardened - Thread Cutting - Tapping Screws Type D Type F Type T (Issue 2; Do Not Use on New Programs; Replaced by ISO 2702)
Standard Association of Australia （SAA）, New Functional Materials
Professional Standard - Building Materials, New Functional Materials
- JC/T 2082-2011 Indoor decorative building materials with the function of humidity-control
- JC/T 1074-2008 Purificatory performance of coatings with air Purification
- JC/T 2040-2010 Indoor decorative materials with the function of negative air ion
Professional Standard - Hygiene , New Functional Materials
- WS/T 450-2014 Fundamental function specification of new rural cooperative medical scheme management information system
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., New Functional Materials
工业和信息化部, New Functional Materials
- JC/T 1074-2021 Indoor air purification function coating material purification performance
- JC/T 2040-2022 Negative ion functional building interior decoration materials
- JB/T 12174.5-2018 Heat shrinkable molded profiles Part 5: Semi-rigid, highly elastic material specifications and system performance
Professional Standard - Ferrous Metallurgy, New Functional Materials
IPC - Association Connecting Electronics Industries, New Functional Materials
German Institute for Standardization, New Functional Materials
- DIN 5514-3:1980 Materials for railway vehicles; elastomers, functional group: permanent door and window seals, specification group
- DIN 5514-5:1984 Materials for rail vehicles; elastomers; function group: profiles for the vehicle superstructures; specification groups
- DIN 50050-2:1988 Testing the burning behaviour of materials; large burning cabinet
- DIN 13089-1:2003 Modular storage and transport equipment in hospitals - Part 1: Requirements on materials, design, performance and function
- DIN 5514-6:1989 Materials for railway vehicles; elastomerers; functional group: brakeparts, specification groups
- DIN 16948-2:1975 Glass fibre reinforced reaktion moulding materials in the moulded state; properties of special moulding materials
Ningxia Provincial Standard of the People's Republic of China, New Functional Materials
- DB64/T 1829.1-2022 Ningxia's "six new" industry high-quality development standard system part 1: new materials
Jiangsu Provincial Standard of the People's Republic of China, New Functional Materials
- DB32/T 3378-2018 New wall material production enterprise laboratory management specification
Anhui Provincial Standard of the People's Republic of China, New Functional Materials
- DB34/T 3969-2021 New wall material production enterprise laboratory management specification
HU-MSZT, New Functional Materials
ACI - American Concrete Institute, New Functional Materials
- ACI SP-312-2016 Novel Characterization Techniques and Advanced Cementitious Materials: Tribute to James J. Beaudoin
- ACI SP-172-1997 High-Performance Concrete: Design and Materials and Recent Advances in Concrete Technology (Out of Print)
Korean Agency for Technology and Standards (KATS), New Functional Materials
- KS R 1115-2003(2018) Testing of dynamometer performance for brake friction material of passenger car
- KS C IEC 61249-4-2:2008 Materials for printed boards and other interconnecting structures-Part 4-2:Sectional specification set for prepreg materials, unclad-Multifunctional epoxide woven E-glass prepreg of defined flammability
- KS C IEC 61249-4-2:2013 Materials for printed boards and other interconnecting structures－Part 4－2：Sectional specification set for prepreg materials, unclad－Multifunctional epoxide woven E-glass prepreg of defined flammability
- KS I 2008-2013 Test method for bacterial reduction rate of building material ― Large chamber method
- KS C IEC 61249-4-12:2008 Materials for printed boards and other interconnecting structures-Part 4-12:Sectional specification set for prepreg material, unclad-Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
- KS C IEC 61249-4-12:2013 Materials for printed boards and other interconnecting structures－Part 4－12：Sectional specification set for prepreg material, unclad－Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
Professional Standard - Agriculture, New Functional Materials
- 219药典 第三增补本-2010 New Appendices to Part II Appendix XIX S Guiding Principles for Functional Index Research of Pharmaceutical Excipients
KR-KS, New Functional Materials
- KS L 1672-2023 Specimen preparation for the performance test of slurry-type photocatalytic materials
British Standards Institution (BSI), New Functional Materials
- BS EN 50324-2:2002 Piezoelectric properties of ceramic materials and components - Methods of measurement - Low power
- BS EN 50324-3:2002 Piezoelectric properties of ceramic materials and components - Methods of measurement - High power
- PD CEN/TR 17603-32-05:2022 Space engineering. Structural materials handbook. New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints
- BS EN ISO 11248:2000 Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures
- BS EN 61249-4-2:2005 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional expoxide woven E-glass prepeg of defined flammability
- BS EN 61249-4-15:2009 Materials for printed boards and other interconnecting structures - Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burn
- BS EN 61249-4-12:2005 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability
- BS EN 477:2018 Tracked Changes. Plastics. Poly(vinyl chloride) (PVC) based profiles. Determination of the resistance to impact of profiles by falling mass
- BS EN 61249-4-16:2009 Materials for printed boards and other interconnecting structures - Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammabilit
Association Francaise de Normalisation, New Functional Materials
- NF EN 62329-3-100:2010 Profilés thermorétractables - Partie 3 : exigences relatives aux dimensions des profilés, exigences de matériaux et performances de compatibilité - Feuille 100 : dimensions des profilés thermorétractables
- NF EN 62329-3-101:2010 Profilés thermorétractables - Partie 3 : exigences relatives aux dimensions des profilés, exigences de matériaux et performances de compatibilité - Feuille 101 : profilés thermorétractables, exigences relatives aux matériaux semi-rigides en pol...
- NF EN IEC 60947-6-1:2023 Appareillage à basse tension - Partie 6-1 : matériels à fonctions multiples - Equipement de transfert de source
- NF C26-501-3*NF EN 50324-3:2002 Piezoelectric properties of ceramic materials and components - Part 3 : properties and methods of measurement - High power.
- NF C93-780-4-2*NF EN 61249-4-2:2006 Materials for printed boards and other interconnecting structures - Part 4-2 : sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
- NF C26-501-2*NF EN 50324-2:2002 Piezoelectric properties of ceramic materials and components - Part 2 : methods of measurement - Low power
- NF EN 62329-3-102:2010 Profilés thermorétractables - Partie 3 : exigences relatives aux dimensions des profilés, exigences de matériaux et performances de compatibilité - Feuille 102 : profilés thermorétractables en élastomère, semi-rigides - Exigences relatives aux...
- NF C93-780-4-12*NF EN 61249-4-12:2006 Materials for printed boards and other interconnecting structures - Part 4-12 : sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
- NF EN ISO 19712-3:2022 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 3 : détermination des propriétés - Produits mis en forme
- NF EN 61249-4-12:2006 Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 4-12 : série de spécifications intermédiaires pour matériaux préimprégnés, non plaqués - Tissu de verre époxyde préimprégné multifonctionnel de type E non ha...
- NF EN 61249-4-2:2006 Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 4-2 : série de spécifications intermédiaires pour matériaux préimprégnés, non plaqués Tissu de verre époxyde de type E préimprégné multifonctionnel d'inflam...
American Society for Testing and Materials (ASTM), New Functional Materials
- ASTM D6435-99 Standard Test Method for Shear Properties of Plastic Lumber and Plastic Lumber Shapes
- ASTM D6108-18 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
- ASTM D6108-19 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
- ASTM D6108-13 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
- ASTM E2925-19 Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function
- ASTM E2925-19a Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function
- ASTM E2925-17 Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function
ES-AENOR, New Functional Materials
Danish Standards Foundation, New Functional Materials
- DS/EN ISO 11248:1999 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures
- DS/EN ISO 61:1999 Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel
International Telecommunication Union (ITU), New Functional Materials
- ITU-T F.747.3-2013 Requirements and functional model for a ubiquitous network robot platform that supports ubiquitous sensor network applications and services (Study Group 16)
- ITU-T Y.1711 AMD 1 SPANISH-2005 Operation & Maintenance mechanism for MPLS networks Amendment 1: New function type codes
ES-UNE, New Functional Materials
- UNE-CEN/TR 17603-32-05:2022 Space engineering - Structural materials handbook - Part 5: New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints (Endorsed by Asociación Española de Normalización in March of 2022.)
International Electrotechnical Commission (IEC), New Functional Materials
- IEC 61249-4-2:2005 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
- IEC 61249-4-12:2005 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
RU-GOST R, New Functional Materials
- GOST 25128-1982 Organic cationic dyes. Test method of dyeability of fibrous materials
- GOST R 50115-1992 Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel
BE-NBN, New Functional Materials
International Organization for Standardization (ISO), New Functional Materials
- ISO/CD 6031:2023 Functional extenders — Nanodiamonds for reinforcing polymer composites
- ISO/DIS 61 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
- ISO/FDIS 61:2004 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
- ISO 61:2023 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
SSPC - The Society for Protective Coatings, New Functional Materials
- PS 26.00-2000 Aluminum Pigmented Epoxy Coating System Materials Specification@ Performance-Based Type I@ for Use Over Blast Cleaned Steel Type II@ for Use Over Hand Cleaned Steel
European Committee for Electrotechnical Standardization（CENELEC）, New Functional Materials
- EN 50324-3:2002 Piezoelectric properties of ceramic materials and components Part 3: Methods of measurement - High power
- EN 61249-4-12:2005 Materials for printed boards and other interconnecting structures Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
- EN 61249-4-2:2005 Materials for printed boards and other interconnecting structures Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
Lithuanian Standards Office , New Functional Materials
- LST EN 50324-3-2003 Piezoelectric properties of ceramic materials and components. Part 3: Methods of measurement. High power
- LST EN 50324-2-2003 Piezoelectric properties of ceramic materials and components. Part 2: Methods of measurement Low power
AENOR, New Functional Materials
- UNE-EN ISO 11248:2000 PLASTICS - THERMOSETTING MOULDING MATERIALS - EVALUATION OF SHORT-TERM PERFORMANCE AT ELEVATED TEMPERATURES (ISO 11248:1993)
国家市场监督管理总局、中国国家标准化管理委员会, New Functional Materials
- GB/T 39494-2020 Determination for coating adhesion of rare earth permanent magnetic materials for drive motor of new energy vehicle
- GB/T 8763-2020 Test methods for gas absorption characteristic of non-evaporation gettering materials and products
- GB/T 40426.2-2021 Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material
NZ-SNZ, New Functional Materials
- AS/NZS 4586:2004 Slip Resistance of Classification of New Pedestrian Surface Materials (Supersedes AS/NZS 3661.1: 1993; Amendment 1: 02/14/2005)
US-AAMA, New Functional Materials
- AAMA 307-2011 Voluntary Performance Requirements and Test Procedures for Laminates Intended for Use on AAMA Certified Profiles
- AAMA 613-2008 Voluntary Performance Requirements and Test Procedures for Organic Coatings on Plastic Profiles
- AAMA 613-2013 Voluntary Performance Requirements and Test Procedures for Organic Coatings on Plastic Profiles
- AAMA 614-2013 Voluntary Specification,Performance Requirements and Test Procedures for High Performance Organic Coatings on Plastic Profiles
- AAMA 615-2013 Voluntary Specification,Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Plastic Profiles
- AAMA 615-2005 Voluntary Specification,Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Plastic Profiles
(U.S.) Ford Automotive Standards, New Functional Materials
- FORD WK902-2005 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS
- FORD WK 902-2010 DIMENSIONS, MATERIAL AND HEAT TREATMENT, AND PERFORMANCE OF HEAVY DUTY SPRING BAND HOSECLAMPS
American Concrete Institute, New Functional Materials
- ACI 446.1R-1991 Fracture Mechanics of Concrete: Concepts, Models and Determination of Material Properties
SAE - SAE International, New Functional Materials
- SAE J1652-2002 Dynamometer Effectiveness Characterization Test for Passenger Car and Light Truck Caliper Disc Brake Friction Materials@ Recommended Practice (April 1995)
- SAE J1652-1995 Dynamometer Effectiveness Characterization Test for Passenger Car and Light Truck Caliper Disc Brake Friction Materials@ Recommended Practice (April 1995)
Professional Standard - Aviation, New Functional Materials
- HB 7655-1999 Forced non-resonant test method for dynamic mechanical properties of plastics and composites
ETSI - European Telecommunications Standards Institute, New Functional Materials
- TS 102 527-5-2014 Digital Enhanced Cordless Telecommunications (DECT); New Generation DECT; Part 5: Additional feature set nr. 1 for extended wideband speech services (V1.2.1)
- TS 102 527-5-2013 Digital Enhanced Cordless Telecommunications (DECT); New Generation DECT; Part 5: Additional feature set nr. 1 for extended wideband speech services (V1.1.1)
Aerospace Industries Association/ANSI Aerospace Standards, New Functional Materials
US-CFR-file, New Functional Materials
- CFR 10-433.3-2013 Energy.Part433:Energy efficiency standards for new federal commercial and multi-family high-rise residential buildings. Section433.3:Materials incorporated by reference.