ZH
RU
ES

New color changing material

New color changing material, Total:137 items.

In the international standard classification, New color changing material involves: Construction materials, Electric road vehicles, Products of the chemical industry, Electronic display devices, Vocabularies, Rubber and plastics products, Raw materials for rubber and plastics, Photography, Installations in buildings, Footwear, Adhesives, Paints and varnishes, Products of the textile industry, Refractories, Transformers. Reactors, Reinforced plastics, Protection against fire, Testing of metals, Environmental testing, Plastics, Medical equipment, Aerospace electric equipment and systems, Nuclear energy engineering, Measurement of volume, mass, density, viscosity, Insulating materials.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, New color changing material

GB/T 42529-2023 Evaluation Requirements for Moisture Conduction and Phase Change Breathing Function of New Wall Materials
GB/T 30069.1-2013 Metallic materials.Tensile testing at high strain rates.Part 1: Elastic-bar-type systems
GB/T 30069.2-2016 Metallic materials.Tensile testing at high strain rates.Part 2:Servo-hydraulic and other test systems
GB/T 13477.21-2022 Test method for building sealants—Part 21：Determination of color change after laboratory accelerated weathering procedures

HU-MSZT, New color changing material

MSZ 9402/2.lap-1958

GM North America, New color changing material

GM GM9191P-1988 Shrinkage, Grain Loss, Gloss and Color Change Vacuum Forming Material
GM GM9162P-1989 Test for Shrinkage, Grain Loss, Gloss and Color Change of Vacuum Forming Material
GM GMP.PVC.065-2002 PVC 65 Shore A, Weatherable, Integral Colored, Low Compression Set, Flexible Extrusion Compound
GMP.PVC.088-2011 PVC ?57 Shore A, 35% Compression Set, Weatherable, Integrally Colored, Extrusion Molding Compound Issue 3; Do Not Use on New Programs; Replaced by GMW16048
GM4359P-2010 Cycle ?Immersion Corrosion Test for Stainless Steel Molding Materials Issue 2; Do Not Use on New Programs; Replaced by GMW15283
GM GMP.PVC.023-2011 PVC - 70 Shore A, UV Stabilized, Integral Colored, Injection Molding Compound (Issue 3; Do Not Use on New Programs; Replaced by GMW16080)
GM GMP.PVC.037-2011 PVC - 80 Shore A, UV Stabilized, Integral Colored, Injection Molding Compound (Issue 2; Do Not Use on New Programs; Replaced by GMW16080)
GM GM292M-2012 Spring Materials - Oil Tempered Chromium-Silicon Steel Wire, Valve Spring Quality (Issue 2; Do Not Use on New Programs; Replaced by GMW16807 Type A)
GM GM2901M-2012 Spring Materials - Oil Tempered High Tensile Steel Wire, Valve Spring Quality (Issue 4; Do Not Use on New Programs; Replaced by GMW16807 Type B)
GM GM6171M-2011 Material and Performance Requirements for Type TR (Thread Rolling) Screws Case Hardened (Issue 3; Do Not Use on New Programs; Replaced by GMW15170; Best Copy Available)
GM GMP.PVC.003-2011 PVC - 37 Shore D, Weatherable, Integral Colored, Extrusion Molding Compound (Issue 3; Do Not Use on New Programs; Replaced by GMW16084)
GM GMP.PVC.007-2011 PVC - 80 Shore A, Weatherable, Integral Colored, Extrusion Molding Compound (Issue 3; Do Not Use on New Programs; Replaced by GMW16084)

IT-UNI, New color changing material

Military Standard of the People's Republic of China-General Armament Department, New color changing material

GJB 8770-2015 Specification for new thermal insulation materials resistant to thermal radiation

商务部, New color changing material

SB/T 11212-2017 New building materials after-sales service specifications

Standard Association of Australia （SAA）, New color changing material

AS 4586:2013
AS/NZS 1580.481.1.12:1998 Paints and related materials - Methods of test - Coatings - Exposed to weathering - Degree of colour change
AS 3730.24:1993 Guide to the properties of paints for buildings Part 24: Wood stain-Solvent-Borne-Interior
AS 3730.28:2006 Guide to the properties of paints for buildings - Wood stain - Solvent-borne - Exterior

CZ-CSN, New color changing material

CSN ON 64 2002-1967

Group Standards of the People's Republic of China, New color changing material

T/ZAMA 1003-2023 Design and testing specifications for new lightweight materials for new energy vehicles
T/GBMEA 01-2023 New low carbon cementitious material used in concrete
T/CBMF 12-2016 The second generation of new dry process cement matching refractory technical acceptance regulations
T/CIET 207-2023 Green Design Product Evaluation Technical Specification Bio-based New Material Polyhydroxyalkanoate
T/CNLIC 0055-2022 Technical specification for green-design product assessment — Plastic profiles for doors and windows
T/CSBM 0012-2021 Determination of elemental composition of biomedical materials with wavelength dispersion x-ray fluorescence spectrometry

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., New color changing material

ASHRAE 4509-2002 A New Test Instrument and Procedure for Evaluation of Fabrics Containing Phasa-Change Material
ASHRAE KC-03-11-4-2003 A New Mass Transfer Based Model of VOC Emissions from Building Materials

German Institute for Standardization, New color changing material

DIN CEN/TS 15082:2005 Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test; German version CEN/TS 15082:2005
DIN 6167:1980-01 Description of yellowness of near-white or near-colourless materials
DIN CEN/TS 15082:2005-10 Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test; German version CEN/TS 15082:2005
DIN EN 12705:2011-08 Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration; German version EN 12705:2011
DIN EN ISO 26203-1:2018-07 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2018); German version EN ISO 26203-1:2018
DIN 41300-1:1979 Small transformers - Characteristic data, M, EI, SM and SE cores (EI-type with small waste of material)
DIN EN 12705:2011 Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration; German version EN 12705:2011
DIN EN ISO 105-X18:2007-12 Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials (ISO 105-X18:2007); German version EN ISO 105-X18:2007

Professional Standard - Electron, New color changing material

SJ 20639-1997 Specification for black guest-host liquid crystal

British Standards Institution (BSI), New color changing material

BS DD CEN/TS 15082:2005 Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test
DD CEN/TS 15082:2005 Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test
BS EN ISO 105-J05:2007 Textiles - Tests for colour fastness - Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCONO2)
BS EN 12705:2011 Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration
PD CEN/TR 17603-32-05:2022 Space engineering. Structural materials handbook. New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints
BS EN 13245-1:2004 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Designation of light coloured profiles
BS EN ISO 26203-1:2010 Metallic materials. Tensile testing at high strain rates. Part 1: Elastic-bar-type systems

European Committee for Standardization (CEN), New color changing material

PD CEN/TS 15082:2005 Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test
EN 12705:2011 Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration
EN 12705:1999 Adhesives for Leather and Footwear Materials - Determination of Colour Change of White or Bright Coloured Leather Surfaces by Migration
EN 13245-1:2010 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles
EN ISO 26203-1:2010 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2010)

Danish Standards Foundation, New color changing material

DS/CEN/TS 15082:2005 Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test
DS/EN 12877-2:2000 Colouring materials in plastics - Determination of colour staility to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding
DS/EN 12705:2011 Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration
DS/EN ISO 105-X18:2007 Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials
DS/EN ISO 26203-1:2010 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems

AENOR, New color changing material

UNE-CEN/TS 15082:2012 EX Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test
UNE-EN 12877-2:2000 COLOURING MATERIALS IN PLASTICS - DETERMINATION OF COLOUR STABILITY TO HEAT DURING PROCESSING OF COLOURING MATERIALS IN PLASTICS - PART 2: DETERMINATION BY INJECTION MOULDING
UNE-EN 12705:2011 Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration
UNE-EN ISO 105-X18:2008 Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials (ISO 105-X18:2007)
UNE-EN ISO 26203-1:2010 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2010)

Association Francaise de Normalisation, New color changing material

XP X41-559*XP CEN/TS 15082:2006 Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test
NF EN 12705:2011 Adhésifs pour le cuir et les matériaux de chaussures - Détermination du changement de couleur par migration des surfaces de cuir blanc ou de couleurs claires
NF EN ISO 105-X18:2007 Textiles - Essais de solidité des teintures - Partie X18 : évaluation de la sensibilité au jaunissement phénolique des matériaux
NF T76-318*NF EN 12705:2011 Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration.
NF T54-409-1:2005 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1 : designation of light coloured profiles.
NF A03-006-1:2010 Metallic materials - Tensile testing method at high strain rates - Part 1 : elastic-bar-type systems.

Ningxia Provincial Standard of the People's Republic of China, New color changing material

DB64/T 1829.1-2022 Ningxia's "six new" industry high-quality development standard system part 1: new materials

Jiangsu Provincial Standard of the People's Republic of China, New color changing material

DB32/T 3378-2018 New wall material production enterprise laboratory management specification

Anhui Provincial Standard of the People's Republic of China, New color changing material

DB34/T 3969-2021 New wall material production enterprise laboratory management specification

American Society for Testing and Materials (ASTM), New color changing material

ASTM D6112-10 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D6112-13 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D6112-97 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D6112-18 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM D6112-97(2005) Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM F1514-03(2013) Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
ASTM E1304-97(2014) Standard Test Method for Plane-Strain &40;Chevron-Notch&41; Fracture Toughness of Metallic Materials
ASTM F1515-98 Standard Test Method for Measuring Light Stability of Resilient Vinyl Flooring by Color Change
ASTM F1515-03 Standard Test Method for Measuring Light Stability of Resilient Vinyl Flooring by Color Change
ASTM E1304-97(2002) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM D2196-10 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D2196-20 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer

Lithuanian Standards Office , New color changing material

LST EN 12877-2-2002 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding
LST EN 12705-2011 Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration
LST EN ISO 105-X18:2007 Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials (ISO 105-X18:2007)
LST EN ISO 26203-1:2010 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2010)

TR-TSE, New color changing material

TS 969-1971 DEGREE OF DETERIORATION OF SULPHUR—DYED TEXTILES MATERIALS UNDER NORMAL STORAGE CONDITIONS

Taiwan Provincial Standard of the People's Republic of China, New color changing material

CNS 5155-1980 Colour Film for General Use-Sizes of Sheet Material
CNS 5166-1980 Colour Paper for General Use-Sizes of Sheet Material

ACI - American Concrete Institute, New color changing material

ACI SP-312-2016 Novel Characterization Techniques and Advanced Cementitious Materials: Tribute to James J. Beaudoin

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), New color changing material

ASHRAE CH-06-6-2006 Symposium on Thermal Modeling of Phase-Change Materials in Building Envelopes: Old Problem, New Developments

ES-AENOR, New color changing material

US-FCR, New color changing material

FCR COE SL-91-7 FINAL REPORT-1991 DEVELOPMENT AND IMPLEMENTATION OF TIME-DEPENDENT CRACKING MATERIAL MODEL FOR CONCRETE

未注明发布机构, New color changing material

BS 7414:1991(1999) Specification for White PVC - U extruded hollow profiles with heat welded corner joints for plastics windows : materials type B

The American Road & Transportation Builders Association, New color changing material

AASHTO M 249-2008 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)

RU-GOST R, New color changing material

GOST 25128-1982 Organic cationic dyes. Test method of dyeability of fibrous materials
GOST ISO 2478-2013 Dense shaped refractory products. Determination of permanent change in dimensions on heating
GOST R 56741-2015 Composites. Method of measuring the uniformity of absorbing electrochromic coating on a glazing surface
GOST R 56773-2015 Composites. Method of accelerated ageining tests of absorptive electrochromic coatings on sealed insulating glass units

Korean Agency for Technology and Standards (KATS), New color changing material

KS K ISO 105-X18:2021 Textiles — Tests for colour fastness — Part X18: Assessment of the potential to phenolic yellowing of materials
KS K ISO 105-X18:2015 Textiles－Tests for colour fastness－Part X18：Assessment of the potential to phenolic yellowing of materials
KS L 3518-2002 Testing method for permanent of linear change on light weight castable refractories

KR-KS, New color changing material

KS K ISO 105-X18-2021 Textiles — Tests for colour fastness — Part X18: Assessment of the potential to phenolic yellowing of materials
KS K ISO 105-X18-2015 Textiles－Tests for colour fastness－Part X18：Assessment of the potential to phenolic yellowing of materials

American National Standards Institute （ANSI), New color changing material

ANSI/NAPM IT9.9-1996 Imaging Materials - Stability of Color Photographic Images - Methods for Measuring (revision and redesignation of ANSI IT9.9-1990)
ANSI IT2.24-1996 Photography - Materials for Direct-Positive Colour Print Cameras - Determination of ISO Speed Revision and Redesignation of ANSI PH2.47-1984; ANSI/ISO 7187-1995
ANSI/NAPM IT2.24-1996 Photography - Materials for Direct-Positive Colour Print Cameras - Determination of ISO Speed (revision and redesignation of ANSI/ISO 7187-1983, ANSI PH2.47-1984 (R1991))
ANSI/ASTM D3555:2007 Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 C Operation

CEN - European Committee for Standardization, New color changing material

EN 13245-1:2004 Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles
EN ISO 26203-1:2018 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems

ES-UNE, New color changing material

UNE-CEN/TR 17603-32-05:2022 Space engineering - Structural materials handbook - Part 5: New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints (Endorsed by Asociación Española de Normalización in March of 2022.)
UNE-EN ISO 26203-1:2018 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2018)

Society of Automotive Engineers (SAE), New color changing material

SAE AMS7101/1-2022 Fused Filament Fabrication, Type 1, Class 1, Form 1, Grade 0, Natural Color Material for
SAE AS81531-1998 Marking of Electrical Insulating Materials FSC 6145; Should be Used for New Design Instead of MIL-M-81531, Which Was Inactivated for New Design on September 30, 1998

International Organization for Standardization (ISO), New color changing material

ISO 26203-1:2010 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems
ISO 26203-1:2018 Metallic materials - Tensile testing at high strain rates- Part 1:Elastic-bar-type systems

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, New color changing material

TR 4648-2009 Aerospace series Cable@ electrical Re-qualification following changes in design@ material or manufacturing process (Edition 1)

VE-FONDONORMA, New color changing material

COVENIN 808-1975

NZ-SNZ, New color changing material

AS/NZS 4586:2004 Slip Resistance of Classification of New Pedestrian Surface Materials (Supersedes AS/NZS 3661.1: 1993; Amendment 1: 02/14/2005)
AS/NZS 1580.481.1.2:1998 Paints and Related Materials - Methods of Test Method 481.1.2: Coatings - Exposed to Weathering - Discolouration (Including Bronzing)

工业和信息化部, New color changing material

QB/T 5080-2017 Technical conditions for special colored co-extrusion materials for unplasticized polyvinyl chloride (PVC-U) profiles

GM Holden Ltd, New color changing material

HOLDEN HN 0068-2012 Colourfastness to Light of Trim materials - Natural Weathering Do Not Use on New Programs, No Replacement. Limited for current use

Professional Standard - Nuclear Industry, New color changing material

EJ/T 20150.17-2018 Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 17: Analysis of krypton and xenon in fuel rod fission gases by gas chromatography

YU-JUS, New color changing material

JUS B.D8.305-1986 Refractories. Methods of phisical testing. Determination of the permanent change in dimensions under the action of heat of dense shaped refractories

The Society for Protective Coatings (SSPC), New color changing material

SSPC PS 26.00-2000 Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based Type I, for Use Over Blast Cleaned Steel Type II, for Use Over Hand Cleaned Steel (Editorial Revisions November 1, 2004)