ZH
RU
ES

Contact Disc Verification

Contact Disc Verification, Total:500 items.

In the international standard classification, Contact Disc Verification involves: Materials and articles in contact with foodstuffs, Kitchen equipment, Linear and angular measurements, Welding, brazing and soldering, Electrical accessories, Photography, Applications of information technology, Electric traction equipment, Medical equipment, Electromechanical components for electronic and telecommunications equipment, Vocabularies, Mechanical testing, Transformers. Reactors, Plastics, INFORMATION TECHNOLOGY. OFFICE MACHINES, Rails and railway components, Railway rolling stock, Testing of metals, Electrical and electronic testing, Packaging and distribution of goods in general, Packaging materials and accessories, Gears, Road vehicles in general, Valves, Aerospace electric equipment and systems, Lifting equipment, Test conditions and procedures in general, Construction of railways, Water quality, Sociology. Demography, Products of the chemical industry, Protection against dangerous goods, Environmental protection, Bearings, Thermodynamics and temperature measurements, Non-ferrous metals, Environmental testing, Electrical engineering in general, Switchgear and controlgear, Construction materials, Materials for aerospace construction, Telecommunication systems, Rubber and plastics products, Non-destructive testing, Conducting materials, Analytical chemistry, Fruits. Vegetables, Electricity. Magnetism. Electrical and magnetic measurements, Radiocommunications, Items of art and handicrafts, Components and accessories for telecommunications equipment, Medical sciences and health care facilities in general, Protection against fire, Road vehicle systems, Fuels, Laboratory medicine, Veterinary medicine, Shop fittings, Audio, video and audiovisual engineering, Sterilization and disinfection, Pharmaceutics, Heat treatment, Alarm and warning systems, Textile fibres, Leather technology, Farming and forestry, Capacitors, Jewellery, Passenger cars. Caravans and light trailers.

German Institute for Standardization, Contact Disc Verification

DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
DIN EN ISO 8442-6:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000
DIN-Fachbericht CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations; English version CEN/TR 15356-1:2006
DIN EN 60512-2-5:2004 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance (IEC 60512-2-5:2003); German version EN 60512-2-5:2003
DIN EN 50318:2003 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line; German version EN 50318:2002
DIN EN 14481:2003-09 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact; German version EN 14481:2003
DIN EN ISO 8442-7:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000
DIN EN ISO 17662:2005 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2005); German version EN ISO 17662:2005
DIN EN 60512-2-2:2004 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method (IEC 60512-2-2:2003); German version EN 60512-2-2:2003
DIN EN 50317/A2 Berichtigung 2:2010 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2002/A2:2007, Corrigendum to DIN EN 50317/A2 (VDE 0115-503
DIN EN 60512-16-9:2009 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008); German version EN 60512-16-9:2008
DIN EN 60512-16-7:2009 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008); German version EN 60512-16-7:2008
DIN EN 2349-307:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop; German and English version EN 2349-307:2006
DIN EN 13001-3-3:2015-02 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts; German version EN 13001-3-3:2014 / Note: Applies in conjunction with DIN EN 13001-1 (2009-12), DIN EN 13001-2 (2014-12).
DIN EN 2349-307:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop; German and English version EN 2349-307:2006
DIN 41626-1:1989 Special contacts for multi two-part connectors; contacts for high current (type H); dimensions, ratings, requirements, tests
DIN EN 60512-16-3:2009 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008
DIN EN 60512-2-3:2003 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests; Test 2c: Contact resistance variation (IEC 60512-2-3:2002); German version EN 60512-2-3:2002
DIN EN 60068-2-43:2004 Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections (IEC 60068-2-43:2003); German version EN 60068-2-43:2003
DIN 41704-2:1987 Electrical communications engineering; connectors with two rows of contacts, connection box and connector, 4- and 8poles; requirements, tests
DIN EN 60512-16-18:2009 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation (IEC 60512-16-18:2008); German version EN 60512-16-18:2008
DIN 53756:1974 Testing of plastics; storage test in contact with chemicals
DIN EN 1183:1997 Materials and articles in contact with foodstuffs - Test methods for thermal shock endurance; German version EN 1183:1997
DIN EN 60512-2-1:2003 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests; Test 2a: Contact resistance; Millivolt level method (IEC 60512-2-1:2002); German version EN 60512-2-1:2002
DIN EN 60068-2-42:2004 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections (IEC 60068-2-42:2003); German version EN 60068-2-42:2003
DIN EN ISO 17662:2016 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016); German version EN ISO 17662:2016
DIN EN 2591-201:1998 Aerospace series - Elements of electrical and optical connection; test methods - Part 201: Contact resistance, low level; German version EN 2591-201:1996
DIN EN 2591-204:1998 Aerospace series - Elements of electrical and optical connection; test methods - Part 204: Discontinuity of contacts in the microsecond range; German version EN 2591-204:1996
DIN EN 60512-16-5:2009 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008); German version EN 60512-16-5:2008

Japanese Industrial Standards Committee (JISC), Contact Disc Verification

JIS B 7441:2009 Acceptance and reverification tests for coordinate measuring machines (CMM) with non-contacting probing systems
JIS C 5402-2-5:2005 Connectors for electronic equipment -- Tests and measurements -- Part 2-5: Electrical continuity and contact resistance tests -- Test 2e: Contact disturbance
JIS E 2002:1994 Overhead contact lines -- Fittings -- Test methods
JIS C 5402-2-3:2005 Connectors for electronic equipment -- Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests -- Test 2c: Contact resistance variation
JIS C 5402-16-3:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations -- Test 16c: Contact-bending strength
JIS C 5402-16-9:2015 Connectors for electronic equipment -- Tests and measurements -- Part 16-9: Mechanical tests on contacts and terminations -- Test 16i: Grounding contact spring holding force
JIS C 5402-2-2:2005 Connectors for electrical equipment -- Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests -- Test 2b: Contact resistance -- Specified test current method
JIS C 5402-2-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests -- Test 2a : Contact resistance -- Millivolt level method
JIS C 5402-16-7:2012 Connectors for electronic equipment -- Tests and measurements -- Part 16-7: Mechanical tests on contacts and terminations -- Test 16g: Measurement of contact deformation after crimping
JIS C 5402-16-6:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-6: Mechanical tests on contacts and terminations -- Test 16f: Robustness of terminations
JIS C 5402-15-1:2014 Connectors for electronic equipment.Tests and measurements.Part 15-1: Connector tests (mechanical).Test 15a: Contact retention in insert
JIS B 8611-8:1999 Commercial refrigerated cabinets -- Methods of test -- Part 8: Test for accidental mechanical contact
JIS C 0092:1993 Basic environmental testing procedures Part 2: Tests Test Kd: Hydrogen sulphide test for contacts and connections
JIS C 5402-16-5:2012 Connectors for electronic equipment -- Tests and measurements -- Part 16-5: Mechanical tests on contacts and terminations -- Test 16e: Gauge retention force (resilient contacts)

ETSI - European Telecommunications Standards Institute, Contact Disc Verification

GS ZSM 006-2018 Zero touch network and Service Management (ZSM); Proof of Concept Framework (V1.1.1)

NEMA - National Electrical Manufacturers Association, Contact Disc Verification

NEMA EVSE 1.2-2015 EV Charging Network Interoperability Standards Part 2: A Contactless RFID Credential for Authentication (UR Interface)

American Society for Testing and Materials (ASTM), Contact Disc Verification

ASTM E164-97 Standard Practice for Ultrasonic Contact Examination of Weldments
ASTM B539-02e1 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-02 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-02(2013) Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B182-49(1965) Method for Life Test of Electrical Contact Materials
ASTM B942-21 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM B942-05 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM B942-10 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM B942-10e1 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM B942-10(2015) Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM E164-03 Standard Practice for Ultrasonic Contact Examination of Weldment
ASTM E164-08 Standard Practice for Contact Ultrasonic Testing of Weldments
ASTM E164-19 Standard Practice for Ultrasonic Contact Examination of Weldment
ASTM B539-96 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-90 Standard Test Methods for Measuring Contact Resistance of Electrical Connections (Static Contacts)
ASTM B539-01 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-18 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-20 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B277-18 Standard Test Method for Hardness of Electrical Contact Materials
ASTM B277-95(2012) Standard Test Method for Hardness of Electrical Contact Materials
ASTM D1370-00 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D1370/D1370M-12(2021) Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D1370/D1370M-12(2016) Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM E114-95(2005) Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method
ASTM E587-15 Standard Practice for Ultrasonic Angle-Beam Contact Testing
ASTM B576-94(2016) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
ASTM D6851-02 Standard Test Method for Determination of Contact pH with Activated Carbon
ASTM D6851-02(2007)e1 Standard Test Method for Determination of Contact pH with Activated Carbon
ASTM E587-10 Standard Practice for Ultrasonic Angle-Beam Contact Testing
ASTM F1661-96 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM F1661-96(2002) Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM E993-88(1996)e1 Standard Test Method for Evaluation of Delayed Contact Hypersensitivity
ASTM E993-01 Standard Test Method for Evaluation of Delayed Contact Hypersensitivity
ASTM B576-94(2005) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
ASTM F1661-08 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM F1661-09 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
ASTM B576-94(2010) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
ASTM D6851-02(2011) Standard Test Method for Determination of Contact pH with Activated Carbon
ASTM E993-05 Standard Test Method for Evaluation of Delayed Contact Hypersensitivity
ASTM B576-94(2021) Standard Guide for Arc Erosion Testing of Electrical Contact Materials
ASTM F1578-07 Standard Test Method for Contact Closure Cycling of a Membrane Switch
ASTM E3285-22 Standard Test Method for Evaluation of Contact-Mediated Microbial Transference
ASTM F1578-07(2014) Standard Test Method for Contact Closure Cycling of a Membrane Switch
ASTM D1611-12 Standard Test Method for Corrosion Produced by Leather in Contact with Metal
ASTM B845-97(2013)e1 Standard Guide for Mixed Flowing Gas &40;MFG&41; Tests for Electrical Contacts
ASTM D1370-00(2007) Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D1370/D1370M-12 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)

American National Standards Institute （ANSI), Contact Disc Verification

ANSI/EIA 364-1004:2010 TS-1004 Environmental Test Methodology for Verifying the Current Rating of Free-Standing Power Contacts or Electrical Connectors
ANSI PH3.45-1971 Contact Uniformity Test for Photographic Contact Printers
ANSI/EIA 364-15A:2006 Contact Strength Test Procedure for Electrical Connectors
ANSI/EIA 364-06B:2000 Electric Connectors - Contact Resistance Test Procedure
ANSI/EIA 364-29C:2006 Electric Connectors - Contact Retention Test Procedure
ANSI/EIA/ECA 364-15A:2006 Contact Strength Test Procedure for Electrical Connectors
ANSI/EIA 364-06C:2006 Contact Resistance Test Procedure for Electrical Connectors
ANSI/EIA 364-07C:2007 Electric Connectors - Crimp Contact Deformation Test Procedure
ANSI/AWS B2.3/B2.3M:2012 Specification for Soldering Procedure and Performance Qualification
ANSI/EIA 364-54A:1999 Magnetic Permeability Test Procedure for Electrical Connectors, Contacts and Sockets
ANSI/EIA 364-37C:2009 Contact Engagement and Separation Force Test Procedure for Electrical Connectors
ANSI/AWS B5.1:2003 Specification for the Qualification of Welding Inspectors
ANSI/SCTE 152-2008 Test Procedure for Contact Resistance Measurement of Mainline Plug Interface
ANSI/EIA 364-23C:2006 Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets
ANSI/EIA 364-37B:1998 Electric Connectors – Contact Engagement and Separation Force Test Procedure
ANSI/EIA 364-05B:2009 Contact Insertion, Release and Removal Force Test Procedure for Electrical Connectors
ANSI/SCTE 103-2012 Test Method for DC Contact Resistance, Drop cable to ôF connectors and F 81 Barrels
ANSI/INCITS TR 28-2002 Information Technology SCSI Domain Validation (SDV)

SE-SIS, Contact Disc Verification

SIS SS-ISO 7816-2:1989 Identification cards — Integrated circuit(s) cards with contacts — Part 2: Dimensions and location of the contacts
SIS SS-ISO 7816-1:1989 Identification cards — Integrated circuit(s) cards with contacts — Part 1: Physical characteristics
SIS SS-ISO 7816-3:1989 Identification cards — Integrated circuit(s) cards with contacts — Part 3: Electronic signals and transmission protocols

Underwriters Laboratories (UL), Contact Disc Verification

UL SUBJECT 116875-2010 OUTLINE OF INVESTIGATION FOR LEAD (Pb) CONTENT VERIFICATION OF PRODUCTS IN CONTACT WITH POTABLE WATER (Issue 1)

American Welding Society (AWS), Contact Disc Verification

AWS WI CH 14-2000 Proof Tests(Welding Inspection)
AWS WI CH 6-2000 Quality Assurance(Welding Inspection)
AWS QC1 PORTUGUESE-2007
AWS QC1-1996 Standard for AWS Certification of Welding Inspectors
AWS QC1-2007 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS [Superseded: AWS QC1-QC2]
AWS QC1-2016 Specification for AWS Certification of Welding Inspectors (6th Edition)

API - American Petroleum Institute, Contact Disc Verification

API TR 17TR7-2017 Verification and Validation of Subsea Connectors (FIRST EDITION)

Professional Standard - Electricity, Contact Disc Verification

DL/T 1183-2012 1,000 kV non-contact electroscope

YU-JUS, Contact Disc Verification

JUS N.K5.020-1979 Low-voltage controlgear. Contactors. Conventional test circuits for the verification of rated making and breaking capacities

International Organization for Standardization (ISO), Contact Disc Verification

ISO/IEC 18745-2:2021 Test methods for machine readable travel documents (MRTD) and associated devices — Part 2: Test methods for the contactless interface
ISO 10344:1996 Optics and optical instruments - Contact lenses - Saline solution for contact lens testing
ISO 8820-4:2002 Road vehicles - Fuse links - Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
ISO 8820-4:2010 Road vehicles - Fuse-links - Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
ISO 14729:2001 Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
ISO 3865:1977 Title missing - Legacy paper document
ISO 3865:1983 Rubber, vulcanized - Methods of test for staining in contact with organic material
ISO 17662:2005 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities
ISO 17662:2016 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities
ISO 1992-8:1978 Commercial refrigerated cabinets; test methods; part VIII: test for accidental mechanical contact
ISO 7397-2:1993 Passenger cars; verification of driver's direct field of view; part 2: test method

ES-AENOR, Contact Disc Verification

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Contact Disc Verification

GB/T 32591-2016 Railway applications.Current collection systems.Validation of simulation of the dynamic interaction between pantograph and overhead contact line
GB/T 32592-2016 Railway applications.Current collection systems.Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
GB/T 28538-2012 Ophthalmic optics.Contact lenses and contact lenses care products.Determination of biocompatibility by ocular study with rabbit eyes
GB/T 28538-2023 Rabbit Eye Compatibility Research Test on Ophthalmic Optical Contact Lenses and Contact Lens Care Products
GB/T 16266-2008 Test method of packaging materials.Contact corrosion
GB/T 16266-1996 Test of packaging materials--Contact corrosivity
GB/T 14229-1993 Standard of test method for surface load capacity of gears
GB/T 21813-2008 Chemicals.Honeybees acute contact toxicity test
GB/T 10622-1989 Metallic materials--Rolling contact fatigue test
GB/Z 22201-2008 Reliability test method for contactor relay
GB/Z 22201-2016 Reliability test method of contactor relay
GB/T 2423.20-2014 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections
GB/Z 22200-2008 Reliability test method for lower capacity alternating current contactors
GB/Z 22200-2016 Reliability test method of small capacity AC contactor
GB/T 2423.19-2013 Environmental testing.Part 2:Test methods.Test Kc:Sulphur dioxide test for contacts and connections
GB/T 2424.12-2014 Environmental testing.Part 2:Test methods.Guidance to test Kd:Hydrogen sulphide test for contacts and connections
GB/T 2424.11-2013 Environmental testing.Part 2:Test methods.Guidance to test Kc:Sulphur dioxide test for contacts and connections
GB/T 14127-1993 Bayeses method of reliability demonstration testing for black and white TV receivers
GB/T 21000.2-2007 Commercial refrigerated cabinets.Test methods.Part 2:Test for accidental mechanical contact
GB/T 2423.20-1981 Electric and electronic products--Basic environmental test regulations for electricians--Test Kd:The hydrogen sulfide method at the point of contact and the connecting element
GB/T 2424.12-1982 Basic environmental testing procedures for electric and electronic products--Guidance for hydrogen sulphide test for contacts and connections
GB/T 9382-1988 Bayes method of reliability demonstration testing for colour broadcasting TV receiver
GB/T 2423.19-1981 Electric and electronic products--Basic environmental test regulations for electricians--Test Kc: The sulphur dioxide method at the point of contact and the connecting element

European Committee for Standardization (CEN), Contact Disc Verification

EN ISO 10344:1998 Optics and Optical Instruments - Contact Lenses - Saline Solution for Contact Lens Testing ISO 10344:1996
EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
EN ISO 17662:2016 Welding - Calibration@ verification and validation of equipment used for welding@ including ancillary activities
PD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
EN 2349-307:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop
CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
EN 1811:2011+A1:2015 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin

CU-NC, Contact Disc Verification

NC 90-14-26-1985 Metrological Assurance. Recording Manóme trie Thermometers with Electric Contact Devices, Verification Methods and Means
NC 90-14-27-1985 Metrological Assurance. MercuryFilled Glass Thermometers with Electrical Contact. Verification Methods and Means
NC 09-07-32-1984 Metrological Assurance. Working Manometers, Manovacuometers, and Vacuometers for Elastic Deformation, and Indicators with Measurement Interval from -0, 1 up to 250 MP with Contact Devices. Verification Methods and Means

Society of Automotive Engineers (SAE), Contact Disc Verification

SAE TS355-1-1987 TS355 Test for Electrical Connectors Contact Deformation after Crimping
SAE J2052-2011 Test Device Head Contact Duration Analysis
SAE J2052-2005 Test Device Head Contact Duration Analysis
SAE AS4764-2012 Validation Methods for MIL-STD-1760 Aircraft Station Interfaces
SAE AS47642A-2012 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces
SAE AS47641-2012 Validation Methods for MIL-STD-1760B Aircraft Station Interfaces
SAE AS47642A-2007 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces

British Standards Institution (BSI), Contact Disc Verification

BS EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2c - Contact resistance variation
BS EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2b - Contact resistance - Specified test current method
BS EN 50318:2018+A1:2022 Railway applications. Current collection systems. Validation of simulation of the dynamic interaction between pantograph and overhead contact line
BS EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
BS EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Test 2e - Contact disturbance
BS EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2a - Contact resistance - Millivolt level method
BS EN 2591-409:1999 Elements of electrical and optical connection - Test methods - Contact retention in insert
BS EN 60512-16-9:2008 Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force
BS EN 60512-16-7:2008 Connectors for electronic equipment – Tests and measurements –– Part 16-7: Mechanical tests on contacts and terminations – Test 16g: Measurement of contact deformation after crimping
BS EN 2591-412:1999 Elements of electrical and optical connection - Test methods - Contact insertion and extraction forces
BS EN 2591-216:1998 Elements of electrical and optical connection - Test methods - Engagement depth of contacts
BS EN 50317:2012+A1:2022 Railway applications. Current collection systems. Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
BS PD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food — Part 1: General considerations
BS ISO/IEC 7816-12:2005 Identification cards. Integrated circuit cards - Cards with contacts. USB electrical interface and operating procedures
22/30456068 DC BS IEC 63453 Ed.1.0. Railway applications. Current collection systems. Validation of simulation of the dynamic interaction between pantograph and overhead contact line
20/30422215 DC BS EN 50318 AMD AA. Railway applications. Current collection systems. Validation of simulation of the dynamic interaction between pantograph and overhead contact line
BS EN ISO 10360-5:2020 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) - Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or…
BS EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
PD ISO/IEC TR 18268:2013 Identification cards. Contactless integrated circuit cards. Proximity cards. Multiple PICCs in a single PCD field
BS EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations — Test 16r: Deflection of contacts, simulation
BS EN 2349-307:2007 Aerospace series - Requirements and test procedures for relays and contactors - Contact voltage drop
BS EN 2349-307:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop
BS EN 60068-2-43:2003 Environmental testing - Test methods - Test Kd - Hydrogen sulphide test for contacts and connections
21/30438713 DC BS EN 50317 AMD1. Railway applications. Current collection systems. Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
BS EN 15802:2009 Conservation of cultural property - Test methods - Determination of static contact angle
BS EN 15802:2010 Conservation of cultural property. Test methods. Determination of static contact angle
BS ISO/IEC 18745-2:2021 Tracked Changes. Test methods for machine readable travel documents (MRTD) and associated devices. Test methods for the contactless interface
BS EN 60068-2-42:2003 Environmental testing - Test methods - Test Kc - Sulphur dioxide test for contacts and connections
BS EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Mechanical tests on contacts and terminations - Test 16e - Gauge retention force (resilient contacts)
BS EN 2591-503:2001 Elements of electrical and optical connection - Test methods - Contact deformation after crimping
BS EN 1459-5:2020 Rough-terrain trucks. Safety requirements and verification. Attachment interface
BS EN 2591-416:2001 Elements of electrical and optical connection - Test methods - Contact bending strength
BS EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations — Test 16d: Tensile strength (crimped connections)
16/30335629 DC BS ISO/IEC 14443-2 AMD2. Identification cards. Contactless integrated circuit cards. Proximity cards. Part 2. Radio frequency power and signal interface
18/30342192 DC BS ISO/IEC 14443-2 AMD3. Identification cards. Contactless integrated circuit cards. Proximity cards - Part 2. Radio frequency power and signal interface
16/30299952 DC BS ISO/IEC 14443-2 AMD1. Identification cards. Contactless integrated circuit cards. Proximity cards. Part 2. Radio frequency power and signal interface
BS EN ISO 17657-5:2006 Resistance welding - Welding current measurement for resistance welding - Verification of welding current measuring system
BS EN 60512-16-13:2008 Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations — Test 16m: Un-wrapping, solderless wrapped connections
BS 6148-8:1981 Methods of test for commercial refrigerated cabinets - Test for accidental mechanical contact
BS ISO/IEC 10373-3:2010 Identification cards. Test methods. Integrated circuit cards with contacts and related interface devices
BS ISO/IEC 10373-3:2018 Identification cards. Test methods. Integrated circuit cards with contacts and related interface devices
BS EN 60512-2-6:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2f - Housing (shell) electrical continuity
BS EN 60512-15-1:2008 Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15a. Contact retention in insert
16/30340278 DC BS ISO/IEC 14443-1 AMD1. Identification cards. Contactless integrated circuit cards. Proximity cards. Part 1. Physical characteristics
18/30342207 DC BS ISO/IEC 14443-4 AMD3. Identification cards. Contactless integrated circuit cards. Proximity cards - Part 4. Transmission protocol
BS EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations — Test 16h: Insulating grip effectiveness (crimped connections)

Korean Agency for Technology and Standards (KATS), Contact Disc Verification

KS B ISO 10360-5-2014(2019) Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems
KS C IEC 60512-2-3:2008 Connectors for electronic equipment-Tests and measurements-Part 2-3:Electrical continuity and contact resistance tests-Test 2c:Contact resistance variation
KS C IEC 60512-2-3:2014 Connectors for electronic equipment-Tests and measurements-Part 2-3:Electrical continuity and contact resistance tests-Test 2c:Contact resistance variation
KS C IEC 60512-2-1:2008 Connectors for electronic equipment-Tests and measurements-Part 2-1:Electrical continuity and contact resistance tests-Test 2a:contact resistance-Millivolt level method
KS C IEC 60512-2-1:2014 Connectors for electronic equipment－Tests and measurements－Part 2-1：Electrical continuity and contact resistance tests－Test 2a：contact resistance－Millivolt level method
KS C IEC 60512-2-2:2009 Connectors for electronic equipment-Tests and measurements-Part 2-2:Electrical continuity and contact resistance tests-Test 2b:Contact resistance-Specified test current method
KS C IEC 60512-2-2:2014 Connectors for electronic equipment－Tests and measurements－Part 2-2：Electrical continuity and contact resistance tests－Test 2b：Contact resistance－Specified test current method
KS R 9141-2007 Testing methods of fittings for overhead contact system of electric railway
KS X ISO/IEC 7816-11:2014 Identification cards — Integrated circuit cards with contacts — Part 11: Personal verification through biometric methods
KS C 0276-1997(2017) Background environmental testing procedures Part2 : Tests Guidance to Test Kc : Sulphur dioxide test for contacts and connections
KS C 0276-1997(2022) Background environmental testing procedures Part2 : Tests Guidance to Test Kc : Sulphur dioxide test for contacts and connections
KS B ISO 1992-8-2003(2008) Commericial refrigerated cabinets－Test methods－Part 8：Test for accidental mechanical contact
KS R ISO 7397-2:2007 Passenger cars-Verification of driver's direct field of view-Part 2:Test method
KS R ISO 8820-4:2003 Road vehicles-Fuse-links-Part 4:Fuse-links with female contacts(type A) and bolt-in contacts(type B) and their test fixtures
KS R ISO 8820-4:2014 Road vehicles — Fuse-links — Part 4: Fuse-links with female contacts(type A) and bolt-in contacts(type B) and their test fixtures
KS C 0246-2001 Basic environmental testing procedures Part 2：Tests-test Kd： Hydrogen sulphide test for contacts and connections
KS C IEC 60068-2-46-2005(2010) Basic environmental testing procedures－Part 2－46：Tests－Guidance to Test Kd：Hydrogen sulphide test for contacts and connections
KS C IEC 60068-2-43:2005 Environmental testing－Part 2－43：Test－Test Kd：Hydrogen sulphide test for contacts and connections
KS C 0245-2001 Basic environmental testing procedures Part 2 : Tests-Test Kc : Sulphur dioxide test for contacts and connections
KS C IEC 60068-2-49-2005(2010) Basic environmental testing procedures－Part 2－49：Tests－Guidance to Test Kc：Sulphur dioxide test for contacts and connections
KS C IEC 60068-2-42:2005 Environmental Testing－Part 2－42：Tests－Test Kc：Sulphur dioxide test for contacts and connections
KS B ISO 1992-8:2003 Commericial refrigerated cabinets-Test methods-Part 8:Test for accidental mechanical contact
KS C 0276-1997 Background environmental testing procedures Part2 : Tests Guidance to Test Kc : Sulphur dioxide test for contacts and connections
KS C IEC 60068-2-46:2005 Basic environmental testing procedures-Part 2-46:Tests-Guidance to Test Kd:Hydrogen sulphide test for contacts and connections
KS C IEC 60068-2-46:2014 Basic environmental testing procedures－Part 2－46：Tests－Guidance to Test Kd：Hydrogen sulphide test for contacts and connections

Professional Standard - Agriculture, Contact Disc Verification

GB 31604.59-2023 National Food Safety Standard General Principles for Validation of Chemical Analysis Methods for Food Contact Materials and Products

GB-REG, Contact Disc Verification

REG NASA-LLIS-0302--1993 Lessons Learned ?Galileo Wiring Harness Contact Crimp Problem
REG NASA-LLIS-0569-1997 Lessons Learned ?Interface Control and Verification
REG NASA-LLIS-1372--2003 Lessons Learned ?Prevent Ground Straps from Contacting Power Sources (2002)
REG NASA-LLIS-0344--1994 Lessons Learned - Solid Propellant in Contact with Porous Material, Fire

CEN - European Committee for Standardization, Contact Disc Verification

EN ISO 17662:2005 Welding - Calibration@ verification and validation of equipment used for welding@ including ancillary activities

GOSTR, Contact Disc Verification

GOST R ISO 10360-5-2017 Geometrical product specifications. Acceptance and reverification tests for coordinate measuring machines. Сoordinate measuring machines using single and multiple stylus contacting systems
GOST R 58343-2019 Information Technology. Test methods for machine readable travel documents (MRTD) and associated devices. Part 2. Test methods for the contactless interface

Electronic Components, Assemblies and Materials Association, Contact Disc Verification

ECA 498B000-1988 Sectional Specification for Touch Stroke Switch Panels of Certified Quality
ECA EIA-364-54A-1999 TP-54A Magnetic Permeability for Test Procedure for Electrical Connectors, Contacts, and Sockets

Association Francaise de Normalisation, Contact Disc Verification

NF EN 50318/A1:2022 Applications ferroviaires - Systèmes de captage de courant - Validation des simulations de l'interaction dynamique entre le pantographe et la caténaire
NF EN 50318:2018 Applications ferroviaires - Systèmes de captage de courant - Validation des simulations de l'interaction dynamique entre le pantographe et la caténaire
NF C93-400-2-5*NF EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Part 2-5 : electrical continuity and contact resistance tests - Test 2e : contact disturbance.
NF F21-318:2002 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line.
NF D25-113*NF EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
NF C93-400-2-3*NF EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3 : electrical continuity and contact resistance tests - Test 2c : contact resistance variation
NF C93-400-2-2*NF EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2 : electrical continuity and contact resistance tests - Test 2b : contact resistance - Specified test current method.
NF EN 50317:2013 Applications ferroviaires - Systèmes de captage de courant - Prescriptions et validation des mesures de l'interaction dynamique entre le pantographe et la caténaire
NF C93-400-2-1*NF EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1 : electrical continuity and contact resistance tests - Test 2a : contact resistance - Millivolt level method
FD A88-120:2021 Certification des agents d'inspection en soudage - Lignes directrices générales
NF F21-318*NF EN 50318:2018 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
NF F21-318/A1*NF EN 50318/A1:2022 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
NF EN 2283:2011 Série aérospatiale - Vérification des câblages d'aéronefs
NF C93-400-16-9*NF EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9 : mechanical tests on contacts and terminations - Test 16i : grounding contact spring holding force
NF C93-400-16-7*NF EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7 : mechanical tests on contacts and terminations - Test 16g : measurement of contact deformation after crimping
NF EN 2349-307:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 307 : chute de tension au contact
NF EN ISO 10360-8:2014 Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des systèmes de mesure tridimensionnels (SMT) - Partie 8 : MMT avec détecteurs optique sans contact
NF EN 13001-3-3:2014 Appareils de levage à charge suspendue - Conception générale - Partie 3-3 : états limites et vérification d'aptitude des contacts galet/rail
NF L58-100-307*NF EN 2349-307:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 307 : contact voltage drop.
NF E11-150-5*NF EN ISO 10360-5:2020 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5 : coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or s
NF C93-400-16-3*NF EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3 : mechanical tests on contacts and terminations - Test 16c : contact-bending strength
NF C20-743*NF EN 60068-2-43:2003 Environmental testing - Part 2-43 : tests - Test Kd : hydrogen sulphide test for contacts and connections
NF C93-400-16-18*NF EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18 : mechanical tests on contacts and terminations - Test 16r : deflection of contacts, simulation
FD D25-116-1*FD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1 : general considerations
NF X80-006*NF EN 15802:2010 Conservation of cultural property - Test methods - Determination of static contact angle
NF C20-742*NF EN 60068-2-42:2003 Environmental testing - Part 2-42 : tests - Test Kc : sulphur dioxide test for contacts and connections
NF C93-400-16-5*NF EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5 : mechanical tests on contacts and terminations - Test 16e : gauge retention force (resilient contacts)

Standard Association of Australia （SAA）, Contact Disc Verification

AS 1796:2001 Certification of welders and welding supervisors
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS 60068.2.42:2004 Environmental testing - Tests - Test Kc: Sulphur dioxide test for contacts and connections
AS 2805.4.1:2001 Electronic funds transfer - Requirements for interfaces - Message authentication - Mechanisms using a block cipher
AS 60068.2.49:2004 Environmental testing - Tests - Guidance to Test Kc: Sulphur dioxide test for contacts and connections
AS 60068.2.43:2004 Environmental testing - Tests - Test Kd: Hydrogen sulphide test for contacts and connections
AS ISO/IEC 18745.2:2023 Test methods for machine readable travel documents (MRTD) and associated devices, Part 2: Test methods for the contactless interface
AS 60068.2.46:2004 Environmental testing - Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

International Electrotechnical Commission (IEC), Contact Disc Verification

IEC 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests; Test 2e: Contact disturbance
IEC 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests; Test 2c: Contact resistance variation
IEC 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests; Test 2a: Contact resistance - Millivolt level method
IEC 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests; Test 2b: Contact resistance; Specified test current method
IEC 60158-3:1985 Low-voltage controlgear. Part 3 : Additional requirements for contactors subject to certification
IEC 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
IEC 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
IEC 62846:2016 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
IEC 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
IEC 60068-2-43:2003 Environmental testing - Part 2-43: Tests; Test Kd: Hydrogen sulphide test for contacts and connections
IEC 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
IEC 60068-2-42:2003 Environmental testing - Part 2-42: Tests; Test Kc: Sulphur dioxide test for contacts and connections
IEC 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

European Committee for Electrotechnical Standardization（CENELEC）, Contact Disc Verification

EN 50504:2008 Validation of arc welding equipment
EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
EN 60512-2-3:2002 Connectors for Electronic Equipment - Tests and Measurements Part 2-3: Electrical Continuity and Contact Resistance Tests - Test 2c: Contact Resistance Variation
EN 50317:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
EN 50317:2012/AC:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
EN 60512-2-1:2002 Connectors for Electronic Equipment Tests and Measurements Part 2-1: Electrical Continuity and Contact Resistance Tests Test 2a: Contact Resistance Millivolt Level Method
EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
HD 419.3 S1-1988 Low-Voltage Controlgear Part 3: Additional Requirements for Contactors Subject to Certification
EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
EN 60068-2-42:2003 Environmental testing Part 2-42: Tests Test Kc: Sulphur dioxide test for contacts and connections
EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
HD 444.2.3-1987 Fire Hazard Testing Part 2: Test Methods Bad- Connection Test with Heaters

Professional Standard - Machinery, Contact Disc Verification

JB/T 7070.1-2002 Test guide for regulator Part 1:Test guide for variable regulators and automatic variable regulators
JB/T 10510-2005 Test method for contact fatigue of rolling bearing material
JB/T 7479-1994 Meteorological contact thermometry - Test general
JB/T 10522-2005 Reliability test method for lower capacity alternating current contactors
JB/T 54308-1994 AC contactors. Reliability requirement and test method
JB/T 6954-2007 Quanity inspection and enaluation of grey castings hardened by contact-resistance-heating
JB/T 6954-1993 Quality inspection and rating of gray cast iron contact resistance heating quenching

Danish Standards Foundation, Contact Disc Verification

DS/EN ISO 10360-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems
DS/EN 14481:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
DS/EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method
DS/EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
DS/EN 50318:2003 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
DS/ISO/IEC 15693-1:2011 Identification cards - Contactless integrated circuit cards - Vicinity cards - Part 1: Physical characteristics
DS/IEC 158-1B:1981 Low-voltage controlgear. Part 1: Contactors. Second supplement to Publication 158-1 (1970)
DS/EN 2349-307:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop
DS/EN 50317:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
DS/ISO/IEC 18745-2:2021 Test methods for machine readable travel documents (MRTD) and associated devices – Part 2: Test methods for the contactless interface
DS 2130-4:1990 Plastics pipes — Test D for leak proofness of joints under external water pressure
DS/CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
DS/IEC 68-2-42:1985 Basic environmental testing procedures. Part 2: Tests. Test Kc: Sulphur dioxide test for contacts and connections
DS/ISO 3865:1985 Rubber, vulcanized. Methods of test for staining in contact with organic material
DS/IEC 68-2-46:1984 Basic environmental testing procedures. Part 2: Tests. Guidance to Test Kd: Hydrogen sulphide test for contacts and connections

AENOR, Contact Disc Verification

UNE-EN 60512-2-5:2004 Connectors for electronic equipment - Tests and measurements -- Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
UNE-EN 14481:2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
UNE-EN ISO 10360-5:2012 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)
UNE-EN 60512-2-2:2004 Connectors for electronic equipment - Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
UNE-EN 50318:2003 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line.
UNE-EN 50317:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
UNE-EN 13001-3-3:2015 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
UNE 23400-5:1998 FIRE FIGHTING SYSTEMS. COUPLINGS FOR FIRE HOSE. PROCEDURE OF VERIFICATION.
UNE-EN 60068-2-43:2004 Environmental testing -- Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

RO-ASRO, Contact Disc Verification

STAS SR EN ISO/CEI 10536-1:1996 Identification cards - Contactless integrated circuit(s) cards - Part 1 Physical characteristics
STAS 8393/22-1982 Environmental testing procedures HYDROGEN SULPHIDE TEST FOR CONTACTS AND CONNECTIONS Test method Kd
STAS 8393/28-1986 Environmental testing procedures HYDROGEN SULPHIDE TEST FOR CONTACTS AND CONNECTIONS Guidance to Test Kd
STAS SR ISO 3865:1995 Rubber, vulcanized - Methods of test for staining in contact with organic material
STAS 8393/21-1982 Environmental testing procedures SULPHUR DIOXIDE TEST FOR CONTACTS AND CONNECTIONS Test method Ke

Professional Standard - Aerospace, Contact Disc Verification

QJ 936-1985 Low level contact resistance test method
QJ 1323.22-1987 Electromagnetic relay test method contact resistance (static) test

Lithuanian Standards Office , Contact Disc Verification

LST EN 50318-2003 Railway applications. Current collection systems. Validation of simulation of the dynamic interaction between pantograph and overhead contact line
LST EN 14481-2004 Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact
LST EN ISO 10360-5:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)
LST EN 2349-307-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop
LST EN 50317-2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
LST ISO/IEC 7816-1:2002/A1:2004 Identification cards. Integrated circuit(s) cards with contacts. Part 1: Physical characteristics AMENDMENT 1: Maximum height of the IC contact surface (idt ISO/IEC 7816-1:1998/Amd.1:2003)

ECIA - Electronic Components Industry Association, Contact Disc Verification

EIA-364-1004A-2016 TS-1004A Environmental Test Methodology for Verifying the Current Rating of Freestanding Power Contacts or Electrical Connectors and Sockets
EIA-364-1004-2010 TS-1004 ENVIRONMENTAL TEST METHODOLOGY FOR VERIFYING THE CURRENT RATING OF FREESTANDING POWER CONTACTS OR ELECTRICAL CONNECTORS AND SOCKETS

Electronic Components, Assemblies and Materials Association, Contact Disc Verification

ECA EIA-364-1004A-2016 TS-1004A Environmental Test Methodology for Verifying the Current Rating of Freestanding Power Contacts or Electrical Connectors and Sockets
ECA EIA-364-37B-1998 TP-37B Contact Engagement and Separation Force Test Procedure for Electrical Connectors FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2014
ECA 364-92-1997 TP-92 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
ECA SP 4945-A-2005 Contact Retention Test Procedure for Electrical Connectors To be published as ANSI/EIA/ECA-364-29C
EIA_ECA-364-39B-1999 TP-39B Hydrostatic Test Procedure for Electrical Connectors, Contacts and Sockets
EIA/ECA-364-39B-1999 TP-39B Hydrostatic Test Procedure for Electrical Connectors, Contacts and Sockets

IT-UNI, Contact Disc Verification

UNI 3137-1965 Microscopic examination of ferrous materials. Cutting of samples and specimens, preparaton and etching of specimens (etching reagents).
UNI 3138-1965
UNI 7035-1979 Plastics intended for contact with food. Global migration test.
UNI 4917-1962
UNI 5863-1966
UNI 3489-1954
UNI 3488-1954
UNI 3492-1954
UNI 3491-1954
UNI 3490-1954
UNI 3494-1954

AWS - American Welding Society, Contact Disc Verification

QC1-2007 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS
QC1-2006 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS
CM-2000 Certification Manual for Welding Inspectors (Fourth Edition)
QC1-2016 Specification for AWS Certification of Welding Inspectors (6th Edition)
QC1-1988 Standard for AWS Certification of Welding Inspectors Fourteenth Edition
A9.5-2013 Guide for Verification and Validation in Computation Weld Mechanics (1st Edition)
QC1-1996 Standard for AWS Certification of Welding Inspectors (GO DIRECT 305/800-443-9353)
QC1-QC2-1986 AWS STANDARDS AND GUIDE FOR QUALIFICATION AND CERTIFICATION OF WELDING INSPECTORS

KR-KS, Contact Disc Verification

KS C IEC 60512-2-3-2008 Connectors for electronic equipment－Tests and measurements－Part 2-3：Electrical continuity and contact resistance tests－Test 2c：Contact resistance variation
KS C IEC 60512-2-2-2009 Connectors for electronic equipment－Tests and measurements－Part 2-2：Electrical continuity and contact resistance tests－Test 2b：Contact resistance－Specified test current method
KS C IEC 60512-2-1-2008 Connectors for electronic equipment－Tests and measurements－Part 2-1：Electrical continuity and contact resistance tests－Test 2a：contact resistance－Millivolt level method

未注明发布机构, Contact Disc Verification

BS EN 50318:2018 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line

Taiwan Provincial Standard of the People's Republic of China, Contact Disc Verification

CNS 9230-1987 Method of Test for Dry Reed Switches (Contact Life Testing)
CNS 6157-1988 Method of Test for Electromechanical Switches(Monitoring Contact Chatter)
CNS 8671-1987 Method of Test for Dry Reed Switches(Contact Stickiness)
CNS 9365-1988 Method of Test for Low Frequency(Below 3 MHz) Electrical Connectors (TP - 6 Contact Resistance)
CNS 9369-1988 Method of Test for Low Frequency (Below 3 MHz) Electrical Connectors (TP - 35 Proposed Insert Retention)

国家市场监督管理总局、中国国家标准化管理委员会, Contact Disc Verification

GB/T 16266-2019 Test method of packaging materials—Contact corrosion
GB/T 14229-2021 Test method of surface contact strength for gear load capacity

SAE - SAE International, Contact Disc Verification

SAE J2052-1990 Test Device Head Contact Duration Analysis@ Information Report
SAE J2052-2016 Test Device Head Contact Duration Analysis
SAE AS47642-2004 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces
SAE AS4764A-2017 Validation Methods for MIL-STD-1760 Aircraft Station Interfaces
SAE AS47643-2017 Verification Methods for MIL-STD-1760E Aircraft Station Interfaces
SAE AS47642B-2017 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces
SAE AS47641A-2017 Validation Methods for MIL-STD-1760B Aircraft Station Interfaces

PL-PKN, Contact Disc Verification

PN E04063-02-1987 On-load tap changers Test methods Contacts pressure

Canadian Standards Association (CSA), Contact Disc Verification

CSA W178.2-08-2008 Certification of Welding Inspectors Fifth Edition
CSA W178.2-01-2001 Certification of Welding Inspectors Fourth Edition
CAN/CSA-ISO/IEC 15693-1:2012 Identification cards - Contactless integrated circuit cards - Vicinity cards - Part 1: Physical characteristics
CSA W178.1-08-2008 Certification of Welding Inspection Organizations Fifth Edition
CSA W178.1-02-2002 Certification of Welding Inspection Organizations Fourth Edition

Group Standards of the People's Republic of China, Contact Disc Verification

T/CWAN 0052-2023 Standard for certification of welding inspectors
T/LYYH 003-2023 Technical Standards of Vaccination Verification System for Vaccination Clinics in Liaoning Province
T/CSEE 0346-2022 General technical requirements for non-contact electroscopes for insulated wires

GM North America, Contact Disc Verification

GM GM9676P-1997 Procedure for Qualifying Quick - Connector Fittings for Vapor Fuel Line (Revision A)

ES-UNE, Contact Disc Verification

UNE-EN 50318:2018/A1:2022 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line (Endorsed by Asociación Española de Normalización in April of 2022.)
UNE-EN 50318:2018 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line (Endorsed by Asociación Española de Normalización in January of 2019.)
UNE 14618:2017 Weld construction inspectors. Qualification and certification.
UNE-EN 50317:2012/A1:2022 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
UNE 23400-5:1999 ERRATUM FIRE FIGHTING SYSTEMS. COUPLINGS FOR FIRE HOSE. PROCEDURE OF VERIFICATION.

Professional Standard - Public Safety Standards, Contact Disc Verification

GA 467-2013 Technical specifications for interfaces of the resident ID card secure access module for authentication
GA 467-2004 Resident ID card verification security control module interface technical specification
GA/T 467-2019 Resident ID card verification security control module interface technical specification

国家食品药品监督管理局, Contact Disc Verification

YY/T 0719.7-2011 Ophthalmic optical contact lenses and contact lens care products - Part 7: Test methods for biological evaluation
YY/T 0719.3-2009 Ophthalmic optical contact lens care products Part 3: Microbiological requirements and test methods and contact lens care systems

NO-SN, Contact Disc Verification

NS 477-2012 Welding inspectors - Tasks, education and certification

IETF - Internet Engineering Task Force, Contact Disc Verification

RFC 6426-2011 MPLS On-Demand Connectivity Verification and Route Tracing

CENELEC - European Committee for Electrotechnical Standardization, Contact Disc Verification

EN 50317:2002 Railway applications - Current collection systems -Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line

Professional Standard - Ferrous Metallurgy, Contact Disc Verification

YB/T 5345-2014 Metallic materials.Rolling contact fatigue test
YB/T 5345-2006 Test method for rolling contact fatigue of metallic materials

RU-GOST R, Contact Disc Verification

GOST R 57822-2017 Perchloroethylene. Test method for stability at contact with copper
GOST R 8.672-2009 State system for ensuring the uniformity of measurements. Transducers with electric contacts for measuring the linear dimensions (parameters). Verification methods
GOST 33039-2014 Testing of chemicals of environmental hazard. Honeybees: acute contact toxicity test
GOST 27924-1988 Fire-hazard testing. Test methods. Bad-connection test with heaters
GOST 33621-2015 Activated carbon. Standard test method for determination of contact pH
GOST 25034-1985 Screw contact terminals. Classification. Technical requirements. Test methods
GOST 26895-1986 Radiocomponents electromechanical. Method of testing of contact fixing
GOST R 54832-2011 Alarms are guarding point magnetic contact. General requirements and test methods
GOST 33775-2016 Testing of chemicals of environmental hazard. Honey bee (Apis mellifera) larval toxicity test, single exposure
GOST R ISO 17662-2017 Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities

BR-ABNT, Contact Disc Verification

ABNT P-MB-320-1963

IN-BIS, Contact Disc Verification

AT-OVE/ON, Contact Disc Verification

OVE EN 50318/AA-2021 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line (Amendment) (english version)
OVE EN 50317/A1-2021 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line (Amendment) (english version)

工业和信息化部, Contact Disc Verification

YD/T 3466-2019 IPv6 access network source address verification technical requirements

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Contact Disc Verification

GB/T 34205-2017 Metallic materials—Hardness testing—Ultrasonic contact impedance method

(U.S.) Ford Automotive Standards, Contact Disc Verification

FORD FLTM BQ 005-07-2000 CORROSION TEST FOR METAL PARTS IN CONTACT WITH SEAT BELT WEBBING

Professional Standard - Railway, Contact Disc Verification

TB/T 2074-2003 Test methods of fittings for overhead contact system in electrification railway
TB/T 2074-2010 Test methods of fittings for overhead contact system in electrification railway
TB/T 3219-2010 General rules for reliability test on board relays and contactors

Professional Standard - Commodity Inspection, Contact Disc Verification

SN/T 2495-2010 Rules for the inspection of food contact materials.Textile materials
SN/T 2549-2010 Rules for inspection of materials intended to contact with food.Supplementary materials
SN/T 2337-2009 Food contact materials inspection rules for metal materials
SN/T 2274-2009 Rules for the inspection of food contact materials.Polymer materilas
SN/T 2274-2015 Food Contact Materials Inspection Regulations Polymer Materials
SN/T 2595-2010 Rules for inspection of food contact materials.Cork,wood and bamboo articles
SN/T 2196-2009 Rules for the inspection of food contact materials.Active and intelligent materials
SN/T 2196-2008 Rules for the inspection of food contact materials.Active and intelligent materials
SN/T 2336-2009 Inorganic non-metallic materials inspection rules for food contact materials

国家铁路局, Contact Disc Verification

TB/T 2074-2020 Test methods for electrified railway catenary components

European Association of Aerospace Industries, Contact Disc Verification

AECMA PREN 2349-307-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 307: Contact Voltage Drop Edition P 1
AECMA PREN 2349-301-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 301: Pick-Up and Drop-Out Voltage Edition P 1
AECMA PREN 2591-E5-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part E5 - Contact Protection Effectiveness (Scoop-Proof) Issue P 1
AECMA PREN 2591-B16-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part B16 - Engagement of Contacts Issue P 1

ANSI - American National Standards Institute, Contact Disc Verification

INCITS/ISO/IEC 15693-1:2000 Identification cards Contactless integrated circuit(s) cards Vicinity cards Part 1: Physical characteristics (Adopted by INCITS)

National Metrological Technical Specifications of the People's Republic of China, Contact Disc Verification

JJF(机械) 1073-2021 Specification for Calibration of Power Line Induction/Contact Test Generators
JJF(机械)1073-2021

Professional Standard - Aviation, Contact Disc Verification

HB 5206-1982 Test method for contact corrosion of packaging materials to metal
HB 5477-1991 Rapid test method for contact corrosion of non-metallic and metallic materials

Professional Standard - Medicine, Contact Disc Verification

YY 0719.3-2009 Ophthalmic optics.Contact lens care products.Part 3:Microbiological requirements and test methods for products and regimens for hygienic management of content
YY/T 0471.5-2017 Test methods for primary wound dressing-Part 5:Bacterial barrier properties
YY/T 0471.3-2004 Test methods for primary wound dressings-Part 3:Waterproofness
YY/T 0471.4-2004 Test methods for primary wound dressing-Part 4:Conformability
YY/T 0471.5-2004 Test methods for primary wound dressing-Part 5:Bacterial barrier properties

US-CFR-file, Contact Disc Verification

CFR 40-80.1667-2014 Protection of Environment. Part80:Regulation of fuels and fuel additives.Section80.1667:Attest engagement requirements.

Association of German Mechanical Engineers, Contact Disc Verification

VDI/VDE/DGQ 2618 Blatt 10.7-2010 Inspection of measuring and test equipment - Test instruction for internal micrometers with 2-point contact
VDI/VDE/DGQ 2618 Blatt 10.8-2002 Inspection of measuring and test equipment - Test instruction for internal micrometers with three-point-contact
VDI/VDE/DGQ 2618 Blatt 13.2-2005 Inspection of measuring and test equipment - Test instruction for bore gauges with 2-point contact
DVS 2230-1-2003 Welding of plastic series parts - Quality assurance and testing
VDI/VDE 2617 Blatt 9-2009 Accuracy of coordinate measuring machines - Characteristics and their reverification - Acceptance and reverification tests for Articulated Arm Coordinate Measuring Machines

Professional Standard - Electron, Contact Disc Verification

SJ/Z 9001.17-1987 Basic environmental testing procedures--Part 2: Tests--Test Kd: Hydrogen sulphide test for contacts and connections
SJ/Z 9001.16-1987 Basic environmental testing procedures--Part 2: Tests--Test Kc: Sulphur dioxide test for contacts and connections
SJ/Z 9001.38-1987 Basic environmental testing procedures--Part 2: Tests--Guidance to Test Kc: Sulphur dioxide test for contacts and connections

The American Road & Transportation Builders Association, Contact Disc Verification

AASHTO R 29-2002 Standard Practice for Grading or Verifying the Performance Grade of an Asphalt Binder

(U.S.) Telecommunications Industries Association , Contact Disc Verification

TIA-455-184-1991 FOTP-184 Coupling Proof Overload Test for Fiber Optic Interconnecting Devices
TIA-455-184-1991(2008) FOTP-184 Coupling Proof Overload Test for Fiber Optic Interconnecting Devices

PT-IPQ, Contact Disc Verification

E 300-1974

GM Daewoo, Contact Disc Verification

GMKOREA EDS-T-7795-2011 TEST METHOD FOR THE CONTACT DRYING TIME OF POLYURETHANE ADHESIVE

Military Standard of the People's Republic of China-General Armament Department, Contact Disc Verification

GJB 360.33-1987 Test methods for electronic and electrical components Contact resistance testing

Professional Standard - Textile, Contact Disc Verification

FZ/T 50048-2020 Test method for instant cool feeling performance of chemical fiber filaments

Professional Standard - Coal, Contact Disc Verification

MT/T 498-1995 Technical specification for maintenance and inspection of CKJ series AC vacuum contactors

农业农村部, Contact Disc Verification

NY/T 3088-2017 Guidelines for acute exposure toxicity testing of natural enemies of chemical pesticides (ladybirds)

VN-TCVN, Contact Disc Verification

TCVN 7180-8-2002 Commercial refrigerated cabinets.Methods of test.Part 8: Test for accidental mechanical contact