97.220.40 标准查询与下载

GB/T 19851.10-2005 中小学体育器材和场地 第10部分;网球拍

GB/T 19851的本部分规定了中小学使用的网球拍的分类、要求、试验方法、标识、包装、运输、储存。 GB/T 19851的本部分适用于中小学的校内使用的网球拍。

Sports equipment and playground for middle school & primary school Part 10:Tennis racket

GB 19272-2003 健身器材 室外健身器材的安全 通用要求

本标准规定了室外健身器材的术语和定义、命名、要求、试验方法以及标志和使用说明、包装、运输和贮存。 本标准适用于室外健身器材。

Body-building equipment General safety requirements for outdoor body-building equipment

ASTM F1772-24 救援和体育活动用安全带标准规范

Standard Specification for Harnesses for Rescue and Sport Activities

24/30481813 DC BS EN 18039 登山设备 娱乐用自锁装置 安全要求和测试方法

BS EN 18039 Mountaineering equipment - Autobelay devices for recreational use - Safety requirements and test methods

ASTM F3249-24 树架、登山杖、三脚架或塔式支架的标准规范

Standard Specification for Treestands, Climbing Sticks, and Tripod or Tower Stands

ASTM F2123-23 Treestand指令的标准实施规程

Standard Practice for Treestand Instructions

ASTM F3545-23 树架、爬杆、三脚架或塔式支架静态载荷的标准试验方法

Standard Test Method for Static Loading of Treestands, Climbing Sticks, and Tripod or Tower Stands

ASTM F887-23 个人攀登设备的标准规范

Standard Specifications for Personal Climbing Equipment

T/QGCML 1625-2023 健身用复合网球拍

本文件规定了健身用复合网球拍的材料要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于以铝合金、碳纤维、尼龙等为主要材质制造的健身用复合网球拍

Composite tennis racket for fitness

T/CASME 692-2023 室外电子健身器材技术与检验要求

本文件规定了室外电子健身器材技术与检验要求的术语和定义、基本原则、技术要求、试验方法、检验规则、标志、说明书、包装、运输和贮存技术内容。

Technical and inspection requirements for outdoor electronic fitness equipment

TY/T 3601-2023 赛艇器材使用规范

本文件适用于静水区域进行竞赛、训练等活动的赛艇器材

Instructions for use of rowing equipment

BS EN 892:2012+A3:2023 登山装备 动态登山绳 安全要求及测试方法

Mountaineering equipment. Dynamic mountaineering ropes. Safety requirements and test methods

ASTM F3099-23 寄生的标准实施规程

1.1 This practice provides guidelines and procedures for the operation, maintenance, and inspection of parasail vessels, equipment, and associated activities including crew training and flying patrons aloft in a parasail. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practices for Parasailing

ASTM F2272-23 彩弹标记的标准规范

1.1 This specification covers paintball markers, which propel a paintball by means of energy released by compressed air, compressed gas, or other means. 1.2 Limitations—This specification does not cover nonrecreational paintball markers, for example, those used by law enforcement, scientific, military or theatrical entities. 1.3 The values stated in SI units are to be regarded as the standard; the inch-pound units in parentheses are provided for information only. 1.4 The following precautionary caveat pertains only to the test method portion, Section 8, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Paintball Markers

QB/T 5817-2023 聚氯乙烯复合织物膜材嬉水池

Polyvinyl chloride composite fabric membrane paddling pool

T/CSGF 018.3-2023 户外运动用品 第3部分：移动照明灯具

本文件规定了使用电光源、电源电压不超过36 V的移动照明灯具（以下简称为“灯具”）的要求、标识、使用说明，以及包装、运输和贮存等，描述了对灯具进行检测的试验方法。 本文件适用于在开展露营、登山、攀岩、徒步、越野跑、骑行、垂钓、潜水等户外运动时使用的可反复充电或更换电池的灯具的设计、生产和测试。

Outdoor sporting goods Part 3: Mobile lighting fixtures

ASTM F1890-23 测量垒球和棒球棒性能系数的标准试验方法

1.1 A method for determining bat performance by measuring the bat-ball coefficient of restitution (BBCOR) and deriving the bat performance factor (BPF). It is applicable to softball and baseball bats of any construction or material. The method provides a quantitative measure of bat dynamic performance that may be used for comparison purposes. 1.2 The BBCOR and BPF are calculated from measurements taken in the laboratory on test equipment meeting the requirements defined in this method. 1.3 Bat performance is found in this standard assuming the bat is pivoted. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Softball and Baseball Bat Performance Factor

ASTM F2271-11(2023) 彩弹标记桶阻塞装置的标准规范

1.1 This specification covers paintball barrel blocking devices that may be inserted or otherwise function to prevent a paintball from leaving the muzzle or the confines of the barrel blocking device intact. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Paintball Marker Barrel Blocking Devices

ASTM F2801-19(2023) 彩弹运动员安全简报的标准实施规程

1.1 This standard is intended to satisfy the demand for basic safety information, which should be understood by each paintball game participant, prior to the start of the player’s first game on the day of play. 1.2 The information specifies rules of personal conduct, which might affect the safety of persons who are in close proximity to a paintball marker or a propellant gas storage vessel. 1.3 The information includes procedures to be followed by every person who is in, or near, an area where paintballs are being shot, and to the use of safety equipment related to paintball games or paintball target shooting activities. These procedures are to be followed any time a paintball marker is being handled. 1.4 This standard is intended to be a useful tool for paintball game organizers, but it is not intended to eliminate the need for proper field operation conforming to Specification F1777. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Paintball Player Safety Briefing

ASTM F2278-19(2023) 评估彩弹屏障网的标准试验方法

1.1 This test method is designed to evaluate paintball barrier netting that may be used to delineate playing fields, chronograph areas, target ranges, and other “goggle-on” areas of an active paintball site. An apparatus is suggested to evaluate paintball barrier netting in a laboratory. On site testing does not require such an apparatus. 1.2 This standard is designed to be used in conjunction with Guide F2184. 1.3 The values stated in SI units are to be regarded as the standard; the inch-pound units in parentheses are provided for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluating Paintball Barrier Netting