97.220.40 标准查询与下载

23/30467025 DC BS EN 17961 登山装备 负载共享设备 安全要求及测试方法

BS EN 17961. Mountaineering equipment. Load sharing devices. Safety requirements and test methods

T/SXJP 031-2023 智能室外健身器材

3　术语和定义 3.1 智能室外健身器材 4　设计原则 5　要求 5.1 通则 5.2　器材电子仪表屏冲击强度要求 5.3　器材电子部件疲劳性能要求 5.4　电气安全要求 5.5　环境适应性 5.6　智能化要求 5.7　　安全警示要求 6　试验方法

Smart Outdoor Fitness Equipment

T/HNSSTA 003-2023 三亚市摩托艇旅游服务规范

本定义规则适用于包含但不限于用于旅游休 闲活动的水上摩托艇，即使用手把式操纵，站立或跨骑式的 在水上使用的水上动力设备等。 本规范所称“体验摩托艇”，是指未取得任何 国际或国内摩托艇组织颁发的摩托艇运动驾照，在摩托艇运 动驾驶员带领下进行近海摩托艇体验活动。 本规范所称“持证摩托艇”，是指取得国际或国内摩托 艇组织颁发的摩托艇运动驾照，具备自主驾驶摩托艇在近海活动的能力。 本规范所称“摩托艇教练”，是指持有国际组织或国家 体育总局颁发的摩托艇项目教练员证书或联合会颁发的摩 托艇等级教练员证书的人员。 本规范所称“摩托艇旅游服务从业者”，是指持有国家 体育总局颁发的摩托艇项目教练员证书或联合会颁发的摩 托艇等级教练员证书以及持有国际或国内摩托艇组织颁发 的摩托艇运动驾照，须为正式摩托艇旅游行业企业员工，拥 有保险和有效健康证，向三亚市体育旅游协会摩托艇旅游专 业委员会 (以下简称“摩托艇旅游专委会”) 申领《三亚市 摩托艇旅游服务人员从业资格证书》，并由摩托艇旅游专委 会统一在三亚市旅游和文化广电体育局备案的摩托艇从业 人员。 本规范所称“摩托艇旅游服务企业”，是指具有独立法 人资格，拥有固定实际经营场所，已投保险，由摩托艇旅游 专委会核准，在三亚市旅游和文化广电体育局备案的摩托艇 旅游从业企业。 本规范所称“摩托艇旅游服务场所”，是指符合本规范 的摩托艇旅游企业在三亚开展摩托艇旅游休闲活动、经营活 动的处所。

Sanya Motorboat Tourism Service Specifications

T/BJYA 001-2023 大众帆船运动水平等级划分与评定规范

根据大众帆船运动不同群体的实际现状，按年龄、船型，由高到低分别设定大众帆船运动等级称号为：大众帆船运动健将级、一级、二级和三级。 评定指标包括帆船理论、体能达标、航海实操、帆船竞赛、水上安全5项测评。

Classification and accreditation specification for public sailing

ASTM F2128-22 树木和重复负载能力的标准试验方法

1.1 This test method covers the procedures for determining the capability of climbing and ladder treestands, climbing sticks (Sectional and Continuous), and tripods/towers to withstand repeated loading relative to the manufacturer’s rated capacity. For actual specification requirements for each subject unit refer to Specification F3249. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Treestand Repetitive Loading Capability

T/CASME 152-2022 竞速用赛艇及其附件

本文件规定了竞技用赛艇及其附件的术语和定义、分类、技术要求、试验方法、标志、包装、运输及贮存。

Racing rowing and their accessories

ASTM F3099-22a 寄生的标准实施规程

1.1 This practice provides guidelines and procedures for the operation, maintenance, and inspection of parasail vessels, equipment, and associated activities including crew training and flying patrons aloft in a parasail. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practices for Parasailing

ASTM F3099-22 寄生的标准实施规程

Standard Practices for Parasailing

22/30461444 DC BS EN 958 登山装备 用于 klettersteig（铁索攀岩）攀岩的能量吸收系统 安全要求及测试方法

BS EN 958. Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods

22/30459149 DC BS EN 17109:2020 AMD1 登山装备 绳索课程的单独安全系统 安全要求及测试方法

BS EN 17109:2020 AMD1. Mountaineering equipment. Individual safety systems for rope courses. Safety requirements and test methods

ASTM F1888-09(2022) 棒球和垒球受压位移的试验方法

1.1 This test method describes a comparative measurement method for baseballs and softballs as defined by a static compression displacement test. 1.2 This test method is based on a slow rate forcedisplacement measurement. 1.3 This procedure is for baseballs and softballs meeting standards established by the sports’ governing bodies. NOTE 1—Since the compression-displacement of baseballs and softballs can influence the performance characteristics, this test provides a simple method to compare and categorize such balls based on force levels in a standardized compression-displacement test. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Compression-Displacement of Baseballs and Softballs

ASTM F3085-14(2022) 空气软枪枪关闭装置的标准规格

1.1 This specification covers air soft gun barrel blocking devices that may be inserted or otherwise function to prevent an airsoft projectile from leaving the muzzle or the confines of the barrel blocking device. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Air Soft Gun Barrel Blocking Devices

ASTM F2184-10(2022) 彩弹屏障网安装的标准指南

1.1 This guide provides recommendations for the installation of paintball barrier netting that may be used to delineate playing fields, chronograph areas, target ranges, and other “goggle-on” areas of an active paintball site. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units in parentheses are provided for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Installation of Paintball Barrier Netting

ASTM F1890-17(2022) 垒球棒性能的标准试验方法

1.1 A method for determining bat performance by measuring the bat-ball coefficient of restitution (BBCOR) and deriving the bat performance factor (BPF). It is applicable to softball and baseball bats of any construction or material. The method provides a quantitative measure of bat dynamic performance that may be used for comparison purposes. 1.2 The BBCOR and BPF are calculated from measurements taken in the laboratory on test equipment meeting the requirements defined in this method. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Softball and Baseball Bat Performance Factor

GSO EN 13843:2022 轮滑运动器材 直排轮滑鞋 安全要求和测试方法

This standard is applicable to inline-skates intended for users with a body mass of more than 20 kg and less than 100 kg. It specifies safety requirements for inline-skates, specifications for test methods, marking and information supplied by the manufacturer to reduce the risk of injuries to both third parties and the user during their normal use. Inline-skates for use by a rider of less than 20 kg do not belong to the scope of this European Standard. They are toys. This Standard does not apply to roller skates according to EN 13899. NOTE Requirements for inline-skates from the orthopedic point of view such as lateral support or similar were not included in this standard because these requirements differ from wearer and therefore cannot be covered by a standard.

Roller sports equipment - Inline-skates - Safety requirements and test methods

GSO EN 16579:2022 运动场设备 便携式和永久插座球门 功能、安全要求和测试方法

This European Standard is applicable to playing field goals used for competition, training or recreational play, indoor and outdoor areas including educational establishments and public recreational areas. It specifies the functional and safety requirements and test methods for all types of portable and permanent socketed goals having a total weight greater than 10 kg with the exception of goals with a size of 5,00 m × 2,00 m and 7,32 m × 2,44 m with a weight of > 42 kg, which are covered by EN 748 (see Table 1, Footnote b and c). The following goals specified in the standards listed below are also excluded: a) EN 748 (football); b) EN 749 (handball); c) EN 750 (hockey); d) EN 1270 (basketball) and any other type of goal used for basketball; e) EN 15312 (free access multi-sports); f) EN 13451 7 (water polo); g) EN 16664 (lightweight goals). The following goals are also excluded: h) inflatable goals; i) goals which are classified as toys under the responsibility of CEN/TC 52; j) for portable and permanent socketed playing field goals for American football; k) goals which are intended to move in use (e.g. Lacrosse, rink hockey and roller hockey).

Playing field equipment - Portable and permanent socketed goals - Functional, safety requirements and test methods

GSO EN 14619:2022 轮滑运动器材.踢滑板车.安全要求和测试方法

This document applies to kick scooters that can only be propelled by the muscular activity of a user with a body mass of more than 20 kg and less than 100 kg. To reduce the risk of injuries to both the user and third parties during intended use this standard specifies safety requirements, test methods, marking, and information supplied by the manufacturer. Kick scooters for use by users of less than 20 kg do not belong to the scope of this document. They are toys. It should be noted that there are two types of scooters for the weight group 20 kg to 50 kg – those classified as sports equipment for use on public roads and path ways (this European Standard) and those classified as toys for domestic use (according to EN 71-1).

Roller sports equipment - Kick scooters - Safety requirements and test methods

GSO EN 15312:2022 免费使用多种运动器材 要求 包括安全和测试方法

This European Standard is applicable to free access multi-sports equipment and combinations intended for permanent installation (not temporary), which includes, but not exclusively, equipment for sports such as badminton, basketball, football, handball, hockey, table tennis, tennis, volleyball. This European Standard specifies requirements, including safety, for the equipment itself as well as for its in-stallation, inspection and maintenance. This European Standard is applicable to multi-sports equipment intended for individual and collective public use primarily by children and teenagers. This type of equipment is not intended for use by very young children, e.g. less than 36 months. This European Standard is not applicable to playground equipment as defined in EN 1176-1, free access fa-cilities used for roller sports equipment (see EN 14974), fitness trails, artificial climbing structures (see EN 12572-1, EN 12572-2 and EN 12572-3). This European Standard does not deal with beach equipment, the ground surfaces the local environment and any feature outside the multi-sports equipment. This European Standard does not include any specific requirements other than for access and egress for dis-abled users.

Free access multi-sports equipment - Requirements, including safety and test methods

GSO EN 13613:2022 轮滑运动器材.滑板.安全要求和测试方法

This standard specifies requirements for non-motorized skateboards which are supplied for use by one rider at a time. The skateboards covered by this standard are graded by performance criteria for different categories of body weight. This standard is not applicable for skateboards for use by a rider up to 20 kg. EN 71-1 is applicable for those. This standard does not apply to individual components.

Roller sports equipment - Skateboards - Safety requirements and tests methods

GSO EN 13899:2022 轮滑运动器材 轮滑鞋 安全要求和测试方法

This standard applies to roller skates intended for users with a body mass of more than 20 kg. This standard specifies safety requirements for roller skates, specifications for test methods, marking and information supplied by the manufacturer to reduce the risk of injuries to both third parties and the user during their normal use. Roller skates for use by a rider of less than 20 kg does not belong to the scope of this European Standard. They are covered by EN 71-1. This standard does not apply to inline-skates.

Roller sports equipment - Roller skates - Safety requirements and test methods