97.220.40 标准查询与下载

ASTM F2845-22 测量棒球和垒球的动态刚度（DS）和圆柱恢复系数（CCOR）的标准试验方法

1.1 This procedure describes a method of measuring the dynamic stiffness (DS) and cylindrical coefficient of restitution (CCOR) of baseballs and softballs providing similar impact forces and ball deformation as are observed in a bat-ball collision. 1.2 This procedure is for a ball that is intended for the game of baseball or softball. 1.3 The test method is based on ball speed measurements before and after impact with a cylindrical test surface and the impact force between the ball and impacted surface. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs

T/HBZXL 003-2022 青少年娱乐足球门

本文件规定了青少年娱乐足球门的分类、要求、试验方法、检验规则、 标志、包装、运输和贮存。

Youth Entertainment for Football goal

BS EN 12491:2015+A1:2021 滑翔伞设备 紧急降落伞 安全要求及测试方法

What is BS EN 12491 - Safety requirements and test methods for emergency parachutes about?    BS EN 12491 focuses on the safety requirements and test methods for emergency parachutes.   BS EN 12491 is applicable to emergency parachutes deployed by the action of the pilot without any other assistance (mechanical or pyrotechnic), intended for use with single-seater or two-seater paragliders.   Who is BS EN 12491 - Safety requirements and test methods for emergency parachutes for?  

Paragliding equipment. Emergency parachutes. Safety requirements and test methods

BS EN 926-2:2013+A1:2021 滑翔伞设备 滑翔伞飞行安全特性分级的要求和测试方法

What is BS EN 926-2 - Flight safety characteristics for paragliding about?    BS EN 926-2 discusses paragliding equipment and paragliders with a focus on requirements and test methods for classifying flight safety characteristics. BS EN 926-2 is the second part of the BS EN 926 multi-series on paragliding equipment that specifies requirements and test methods for classifying the flight safety characteristics of paragliders in terms of the demands on pilot flying skills. BS EN 926-2 is intended for the use of independent testing laboratories qualified for flight testing paragliders.   Who is BS EN 926-2 -

Paragliding equipment. Paragliders - Requirements and test methods for classifying flight safety characteristics

DIN EN 892:2022 登山装备-动力登山绳索-安全要求和试验方法；德文版 EN 892:2012+A2:2021

This European Standard specifies safety requirements and test methods for dynamic ropes (single, half and twin ropes) in kernmantel construction for use in mountaineering including climbing.

Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods; German version EN 892:2012+A2:2021

ASTM F2125-09(2021) 树的静态稳定性和粘附性的标准试验方法

1.1 This test method covers the determination of the static stability and adherence of treestands relative to the manufacturer’s rated capacity. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Treestand Static Stability and Adherence

ASTM F2128-13(2021) 树木和重复加载能力的标准试验方法

Standard Test Method for Treestand Repetitive Loading Capability

ASTM F2941-21 空中软式播放机安全简报的标准实施规程

1.1 This practice is intended to satisfy the demand for basic safety information, which should be understood by each air soft game participant prior to the start of the player’s first game on the day of play. 1.2 The information specifies rules of personal conduct, which might affect the safety of persons who are in close proximity to an air soft gun. 1.3 The information includes procedures to be followed by every person who is in, or near, an area where air soft games are being played or air soft ammunition is being shot, and to the use of safety equipment related to air soft game or air soft target shooting activities. These procedures are to be followed any time an air soft gun is being handled. 1.4 This standard is intended to be a useful tool for air soft game organizers, but it is not intended to eliminate the need for proper game supervision, conforming to Practice F2940. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Air Soft Player Safety Briefing

BS EN 17520:2021 登山装备 个人保护挂绳 安全要求及测试方法

What is BS EN 17520 about?    BS EN 17520 discusses mountaineering equipment; specifically, belay lanyards. BS EN 17520 specifies safety requirements and test methods for lanyards intended to be the primary connection between the climber and the belay stance, with the ability to withstand a dynamic impact.    Note: Lanyards intended only for positioning (e.g., daisy chain) or energy absorption via Ferrata or lanyards for rope courses are not covered in BS EN 17520 .  Who is BS EN 17520 for?   BS EN 17520 on mountaineering equipment (belay lanyards) is useful for:   Manufacturers and distributors of mountaineering equipment   Trekking expedition companies 

Mountaineering equipment. Personal belay lanyards. Safety requirements and test methods

BS EN 892:2012+A2:2021 登山装备 动态登山绳 安全要求及测试方法

1   Scope This European Standard specifies safety requirements and test methods for dynamic ropes (single, half and twin ropes ) in kernmantel construction for use in mountaineering including climbing.

Mountaineering equipment. Dynamic mountaineering ropes. Safety requirements and test methods

T/DGJMJS 015-2021 智慧健身器材设施技术规范

本文件规定了智慧健身器材设施的设施设备要求及器材要求。

Technical specification for intellectual fitness equipment

T/CSSGA 1036-2021 足球

5.1　原料安全要求 5.2　质量 5.3　圆周长、圆周差 5.4　圆度 5.5　气密性 5.6　反弹高度 5.7　耐冲击性能 5.8　防水性 5.9　外观质量

Football

OENORM EN ISO 25649-5:2021 水上和水中使用的漂浮休闲用品 第5部分：C 类设备的附加特定安全要求和测试方法（ISO/DIS 25649-5:2021）

Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO/DIS 25649-5:2021)

OENORM EN ISO 25649-1:2021 水上和水中使用的漂浮休闲用品 第1部分：分类、材料、一般要求和测试方法（ISO/DIS 25649-1:2021）

Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO/DIS 25649-1:2021)

OENORM EN ISO 25649-7:2021 水上和水中使用的漂浮休闲用品 第7部分：E 类设备的附加特定安全要求和测试方法（ISO/DIS 25649-7:2021）

Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices (ISO/DIS 25649-7:2021)

OENORM EN ISO 25649-6:2021 水上和水中使用的漂浮休闲用品 第6部分：D 类设备的附加特定安全要求和测试方法（ISO/DIS 25649-6:2021）

Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO/DIS 25649-6:2021)

OENORM EN ISO 25649-4:2021 水上和水中使用的漂浮休闲用品 第4部分：B 类设备的附加特定安全要求和测试方法（ISO/DIS 25649-4:2021）

Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO/DIS 25649-4:2021)

KS G 7003-2021 游泳镜

Swimming goggles

KS G 5815-2021 登山装备 滑轮 安全要求及试验方法

Mountaineering equipment－Pulleys－Safety requirements and test methods

KS G 5802-2021 登山装备 胶带 安全要求及测试方法

Mountaineering equipment－Tape－Safety requirements and test methods