97.220.40 标准查询与下载

T/SZAF 002-2021 多用途轻型水中助推器

可应用于淡水、海水、污水等多种类型水域内，通过电动螺旋桨推进器产生推动力，带动或辅助操作人员在水中以一定速度滑行或助力游动的装置，为水下作业人员提供额外助推力，减少水下体力和氧气消耗，并增加作业人员活动范围及作业半径，可应用于潜水摄影、检查搜索、抢险救援、水下作业、蛙人运载等多种场景中。

Multi-function underwater scooter

GSO ISO 25649-6:2021 水上和水中使用的漂浮休闲用品 第6部分：D 类设备的附加具体安全要求和测试方法

ISO 25649-6:2017 is applicable for Class D floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material. ISO 25649-6:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2. NOTE 1 Typical products forming Class D (see Annex A): - inflatable climbing structures on the water; - bouncing platforms; - inflatable slides; - water trampolines; - teeter totters; - obstacle courses. NOTE 2 Typical places for application: - pools; - lakes, ponds; - open sea; - sea shore (no offshore winds, no currents).

Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices

GSO ISO 25649-4:2021 水上和水中使用的漂浮休闲用品 第4部分：B 类设备的附加具体安全要求和测试方法

ISO 25649-4:2017 specifies safety requirements and test methods related to materials, safety, performance and consumer information for classified floating leisure articles for use on and in the water according to ISO 25649‑1. ISO 25649-4:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2. ISO 25649-4:2017 is applicable for Class B floating leisure articles for use on and in the water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material. Class B devices provide a buoyant structure with one or more body openings into which the user is positioned partly immersed. NOTE 1 Typical products forming Class B (see Annex B): - floating rafts with interior body holding system ("swim seats") mostly in circular or square shape, fantasy shape for playing purposes; - floating fantasy shaped structures with one or more openings to host a child's body, with or without body holding system; - floating with slits or openings to put legs through any shape; - floating rings with interior seat segments inside the circular body opening. NOTE 2 Typical places for application: - pools; - protected areas of lakes, ponds; - protected area sea shore (no offshore winds, no currents).

Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices

GSO ISO 25649-7:2021 水上和水中使用的漂浮休闲用品 第7部分：E 类设备的附加具体安全要求和测试方法

ISO 25649-7:2017 is applicable for Class E floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material. ISO 25649-7:2017 is applicable with ISO 25649‑1 and ISO 25649‑2. Class E devices are intended for use in bathing areas or in protected and safe shore zones. NOTE 1 Typical products forming Class E (see Annex F): - inflatable boats for rowing or paddling of near oval shape with or without transom; - canoes and kayaks; - inflatable boats made from plastic sheets or from reinforced materials; - motor kit/sail kit as additional option. NOTE 2 Typical places for application of Class E devices: - moving from A to B for pleasure purposes; - staying on the water for relaxing; - moving from shore to the main boat, transportation of persons and load (tender boat).

Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices

GSO EN 1069-1:2021 水滑梯 第1部分：安全要求和测试方法

This European Standard is applicable to all water slides installed in swimming pools of public use. This Standard specifies general safety requirements for water slides in swimming pools of public use and specific requirements for defined types of water slides. These specific safety requirements are also applicable to undefined types as far as possible. These requirements concern safety and the technical rules for design, calculation and testing.

Water slides -- Part 1: Safety requirements and test methods

GSO ISO 25649-5:2021 水上和水中使用的漂浮休闲用品 第5部分：C类设备的附加具体安全要求和测试方法

ISO 25649-5:2017 is applicable for CLASS C classified floating leisure articles for use on and in water according to ISO 25649‑1 regardless of whether the buoyancy is achieved by inflation or inherent buoyant material. ISO 25649-5:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2. NOTE 1 Typical products forming class C (see Annex B): - tube riders towable with interior holding facility and closed cockpit; - raft riders towable; - board riders towable; - banana type towable. NOTE 2 Typical places for application: - distant from bathing areas and other frequented water surfaces, wide empty spaces, dedicated racetracks (parcours); - no to little waves; - no strong currents.

Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices

GSO ISO 25649-3:2021 水上和水中使用的漂浮休闲用品 第3部分：A类设备的附加具体安全要求和测试方法

ISO 25649-3:2017 is applicable for CLASS A classified floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material. ISO 25649-3:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2. NOTE 1 Typical products forming Class A (see Annex A): - "Floating Islands" in near round or square shaped forms decorated with palm tree, sun shade, etc. high superstructure; - large floats/rafts in various forms from round to square; - large floating tubes, giant tubes (inflatable or inherently buoyant); - floating arm chairs, seats and sun beds; - air mattresses for use on the water; - recreational rafts/floating platforms/pontoons. NOTE 2 Typical places for application: - pools; - protected areas of lakes, ponds; - protected area sea shore (no offshore winds, no currents).

Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices

GSO ISO 25649-1:2021 水上和水中使用的漂浮休闲用品 第1部分：分类、材料、一般要求和测试方法

ISO 25649-1:2017 specifies safety requirements and test methods related to materials, safety, performance for classified floating leisure articles for use on and in water in accordance with Clause 4 (see Table 1). ISO 25649-1:2017 is only applicable with ISO 25649‑2 and the relevant specific parts (ISO 25649‑3 to ISO 25649‑7). NOTE 1 Specific safety requirements are specified in ISO 25649‑3 to ISO 25649‑7. NOTE 2 The specific parts can include exclusions from the general requirements specified in this document and/or ISO 25649‑2. ISO 25649-1:2017 is not applicable to: - aquatic toys according to European Directive 2009/48/EC (use in shallow waters/use under supervision); - inflatable boats with a buoyancy > 1 800 N according to European Directive 94/25/EC; - buoyant aids for swimming instructions according to European Directive 89/686/EEC; - air mattresses which are not specifically designed or intended for use on the water (e.g. velour bed, self inflating mattress and rubberized cotton air mattress); - floating seats for angling purposes; - surf sports type devices (e.g. body boards, surf boards); - water ski, wakeboard or kite surfing board; - devices made from rigid materials e.g. wood, aluminium, hard or non-deformable plastic; - devices which are kept in shape by permanent air flow; - rings intended for use on water slides; - wading devices.

Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods

GSO EN 16664:2021 运动场设备 轻量级球门 功能、安全要求和测试方法

This European Standard specifies the functional and safety requirements and test methods for lightweight goals, which are classified in 4. This standard is not applicable to goals: a) according to EN 748 (football); b) EN 749 (handball); c) EN 750 (hockey); d) EN 1270 (basketball); e) EN 15312 (free access multi-sports); f) EN 13451-4 (water polo); g) to prEN 16579 (portable and fixed goals); h) inflatable goals; i) goals which are classified as toys under the responsibility of technical committees CEN/TC 52 "Safety of toys"; j) Goals which are intended to move in use (e.g. rink hockey and roller hockey). It is applicable to playing field goals used for training or recreational play, indoor and outdoor including educational and public establishments and recreational areas.

Playing field equipment - Lightweight goals - Functional, safety requirements and test methods

GSO EN 1069-2:2021 水滑梯 第2部分：说明

This European Standard is applicable to water slides as defined in EN 1069-1:2017, 3.3. This European Standard establishes the instructions for use, operation and maintenance as well as the documentation and commissioning of water slides.

Water slides - Part 2: Instructions

FprEN 17520-2021 登山装备 个人保护绳 安全要求和试验方法

Mountaineering equipment - Personal belay lanyards - Safety requirements and test methods

EN 13089+A1/FprA2:2021 登山装备 冰上工具 安全要求和试验方法

Mountaineering equipment - Ice-tools - Safety requirements and test methods

EN 892+A1/FprA2:2021 登山装备 动力登山绳索 安全要求和试验方法

Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods

ASTM F2030-21 彩弹圆筒爆破片组件的标准规范

1.1?This specification covers burst disk assemblies for paintball marker propellant sources their application and installation requirements. 1.2?The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1

Standard Specification for Paintball Cylinder Burst Disk Assemblies

ASTM F2272-13(2021) 彩弹标记的标准规范

1.1 This specification covers paintball markers, which propel a paintball by means of energy released by compressed air, compressed gas, or other means. 1.2 Limitations—This specification does not cover nonrecreational paintball markers, for example, those used by law enforcement, scientific, military or theatrical entities. 1.3 The values stated in SI units are to be regarded as the standard; the inch-pound units in parentheses are provided for information only. 1.4 The following precautionary caveat pertains only to the test method portion, Section 8, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Paintball Markers

ASTM F2123-21 Treestand指令的标准实施规程

1.1?This practice provides guidance for providing user instructions for treestands. 1.2?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are

Standard Practice for Treestand Instructions

ABNT PR 1004-4-2020 流行病状态下组织安全操作第4部分：马术比赛 - 马术、骑马和农业展览

Organizing safe operations in an epidemic situation Part 4: Equestrian events - equestrian, riding and agricultural exhibitions

T/ZZB 1691-2020 自行车、滑板、滑轮运动头盔

本标准规定了自行车、滑板、轮滑运动头盔的术语和定义、基本要求、规格、技术要求、试验方法、标志、包装、运输和贮存、产品说明书、质量承诺。 本标准适用于自行车、滑板、轮滑运动者佩戴的头盔。

Sports helmets for cyclists and users of skateboards and roller skates

ASTM F2398-11(2020) 用于测量棒球或垒球蝙蝠的惯性力矩和撞击中心的标准测试方法

1.1 Method for determining the moment of inertia (MOI), the center of percussion (COP), and the balance point (BP) of baseball and softball bats. These physical properties are used in Test Method F1881, Test Method F1890, and Test Methods F2219. 1.2 The MOI, COP, and BP are measured in the laboratory on test equipment meeting the requirements defined in this test method. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat

ASTM F2844-20 垒球和棒球棒桶位移压缩的标准测试方法

1.1 This test method describes a comparative measurement method for determining the compression force of softball and baseball bat barrels as defined by a static compression displacement test. 1.2 This standard is not intended to define the performance of softball or baseball bats but to determine the intrinsic barrel compression of a specific bat. 1.3 This standard can be used to compare the relative barrel compression force of bats using a relatively slow, non-impact loading rate. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels