K47 输电线路器材 标准查询与下载

DL/T 975-2005 带电作业用防机械刺穿手套

本标准规定了带电作业用防机械刺穿绝缘手套的分类、技术要求、适用电压等级、工艺检查和试验条件、试验项目、试验方法等。 本标准适用于交流3000V或直流11250V及以下电压等级的带电作业用防机械刺穿分指绝缘手套和连指绝缘手套。

Live working-Gloves and mitts with mechanical protection

NF C11-223-1:2005 大于交流电1kV小于等于交流电45kV的架空电力线.第1部分:一般要求.通用规范

Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 1 : general requirements - Common specifications.

IEC 61243-1:2005 带电作业.电压检测器.第1部分:电压超过交流1kV用电容型

Is applicable to portable voltage detectors, with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 765 kV a.c., and frequencies of 50 Hz and/or 60 Hz. This part applies only to voltage detectors of capacitive ty

Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

KS C IEC 61243-5:2005 带电作业.电压检测器.第5部分:电压检测系统(VDS)

이 규격은 충전부에 정전 결합되어 있는 단극 전압 검출 시스템에 대해 규정한다. 이 규격은

Live working－Voltage detectors－Part 5：Voltage detecting systems(VDS)

DIN 48207-2:2005 额定电压超过1KV的架空线.导体安装的方法和设备.第2部分:电缆钳

This standard refers to cable grips for the installation of overhead line conductors with rated voltages above 1 kV according DIN EN 50341-1 (VDE 0210-1) and DIN EN 50423-1 (VDE 0210-10).

Overhead lines with nominal voltages exceeding 1 kV - Methods and equipment for the installation of conductors - Part 2: Cable grips

DIN 48207-3:2005 额定电压超过1KV的架空线.导体安装的方法和设备.第3部分:带球形接头的电缆连接件

This standard refers to cable couplers for the installation of overhead line conductors with voltages above 1 kV according DIN EN 50341-1 (VDE 0210-1) and DIN EN 50423-1 (VDE 0210-10).

Overhead lines with nominal voltages exceeding 1 kV - Methods and equipment for the installation of conductors - Part 3: Cable couples with spherical joint

ANSI/IEEE C37.63:2005 交流系统用架空、底座安装型、干拱顶和水中线路自动分段器的要求

Descibes the requirements for sectionalizers for overhead, pad-mounted, dry-vault, and submersible single-pole or multipole ac automatic lines for rated maximum voltages from 1000 V to 38000 V.

Line Sectionalizers for Alternating-Current Systems, Requirements for Overhead, Pad-Mounted, Dry Vault and Submersible Automatic

DIN EN 50262:2005 电气装置用电缆密封套

Cable glands for electrical installations; German version EN 50262:1998 + A1:2001 + A2:2004

ANSI/IEEE 1441:2004 驾空传输线结构检查指南

Covers the inspection procedures and practices for right-of-way issues, foundations, structures, and wire installation for overhead lines.

Guide for Inspection of Overhead Transmission Line Construction

NF C68-302/A2:2005 电气设备的电缆密封垫

Cable glands for electrical installations.

DIN EN 40-2:2005 灯柱.第2部分:一般要求和尺寸

This European Standard specifies the requirements and dimensions for lighting columns, brackets, base compartments, cableways and earthing terminals. It applies to post top columns not exceeding 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns. This Part does not attempt to restrict the actual appearance or shape of the column or bracket.#,,#

Lighting columns - Part 2: General requirements and dimensions; German version EN 40-2:2004

DIN EN 60900:2005 带电作业.交流电1000 V和直流1500 V以的带电作业用手持工具(IEC 60900-2012).德文版本EN 60900-2012

Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. (IEC 60900:2012); German version EN 60900:2012

DL/T 899-2004 架空线路杆塔结构荷载试验

Loading Tests on Tower and Pole Structures of Overhead Line

DIN VDE 0682-621:2004 带电作业.额定电压大于1 kV小于等于36 kV的带电部分的清洁用吸入设备

Live working - Suction device for the cleaning of live parts with rated voltages above 1 kV up to 36 kV

BS EN 62199:2004 直流套管

This International Standard applies to outdoor and indoor bushings of any voltage used on d.c. systems, of capacitance graded or gas insulated types for use as components of oil-filled converter transformers and smoothing reactors, as well as air-to-air d.c. bushings. This standard does not apply to the following: · cable terminations (potheads); · bushings for instrument transformers; · bushings for test transformers; · bushings applied with gaseous insulation (other than air at atmospheric pressure) external to the bushing; · bushings for industrial application; · bushings for traction application. This standard makes reference to IEC 60137 for general terms and conditions and defines the special terms used, operating conditions, ratings, test procedures as well as general mechanical and electrical requirements for bushings for d.c. application. Where applicable, reference can also be made to IEC 61462 for composite insulators - hollow insulators for use in outdoor and indoor electrical equipment and to IEC 62155 for hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V.

Bushings for D.C. application

BS EN 60900:2004 带电作业.供使用的小于交流1000 V和直流1500 V的手工工具

This International Standard is applicable to insulated and insulating hand tools used for working live or close to live parts at nominal voltages up to 1 000 V a.c. and 1 500 V d.c.

Live working. Hand tools for use up to 1000 V a.c. and 1500 V d.c

NF C93-563-1*NF EN 50109-1:2004 手工压接工具.低频和射频设备用电缆和电线的压接终端工具.第1部分:一般要求和试验

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 1 : general requirements and tests.

NF C68-110:2004 电缆管理用导管系统.第1部分:一般要求

Conduit systems for cable management - Part 1 : general requirements.

NF C93-563-2-4*NF EN 50109-2-4:2004 手工压接工具.低频和射频设备用电缆和电线的压接终端工具.第2-4部分:SMZ系列RF连接器的中心触点的特殊要求

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4 : particular requirements for centre contacts of RF connectors, series SMZ.

DIN EN 62193:2004 带电作业.伸缩式带电作业杆和可伸缩测量尺

Live working - Telescopic sticks and telescopic measuring sticks (IEC 62193:2003); German version EN 62193:2003