K47 输电线路器材 标准查询与下载

IEC 60832-1:2010 带电作业.绝缘杆及附件设备.第1部分:绝缘杆

This part of IEC 60832 gives the essential requirements for insulating sticks for live working for use on a.c. electrical installations. Part 2 of IEC 60832 covers devices that can be attached onto and removed from the fitting of the insulating sticks. The products designed and manufactured according to this standard contribute to the safety of the users provided they are used by skilled persons@ in accordance with safe methods of work and the instructions for use.

Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks

DIN EN 61477:2010 带电作业.使用工具、器件和设备的最低要求(IEC 61477-2009 +勘误表-2009).德文版本EN 61477-2009

This Standard gives the minimum requirements relative to specification, manufacture, selection, application and maintenance of tools, devices and equipment for live working. It provides the type of information which is useful to skilled persons in order to make the use of tools, devices and equipment safer.

Live working - Minimum requirements for the utilization of tools, devices and equipment (IEC 61477:2009 + corrigendum:2009); German version EN 61477:2009

BS EN 50397-2:2009 交流额定电压大于1 kV和不超过36 kV的高架电力线和相关配件用包覆导线.包覆导线用配件.试验和验收标准

This Part 2 of EN 50397 contains the requirements for accessories that are for use with the covered conductors in accordance with EN 50397-1. They are for applications in overhead lines with rated voltages U above 1 kV a.c. and not exceeding 36 kV a.c. NOTE This European Standard describes the requirements and tests only for the accessories installed on the covered conductor itself.

Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Accessories for covered conductors - Tests and acceptance criteria

IEEE 1410-2010 提高电力架空配电线路避雷性能的指南

Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines

ANSI/IEEE 1656:2010 额定电压为38 kV的高架配电系统野生动物防护设施的电气,机械和耐用性能测试指南

Applicable to wildlife protective products installed on overhead electrical distribution systems rated up to and including 38 kV. The guide provides test recommendations regarding these products that are in direct contact or in the proximity of energized parts and conductors.

Guide for Testing the Electrical, Mechanical, and Durability Performance of Wildlife Protective Devices on Overhead Power Distribution Systems Rated up to 38 kV

IEEE 1656-2010 38 kV以上高架配电系统野生动物防护设施的电气,机械和耐用性能测试指南

Guide for Testing the Electrical, Mechanical, and Durability Performance of Wildlife Protective Devices on Overhead Power Distribution Systems Rated up to 38 kV

BS EN 6049-003:2009 航空航天系列.安装电缆.间聚芳族酰胺纤维中的保护轴套.可膨胀管状编织.产品标准

This standard defines the characteristics of tubular braided expandable mechanical protection sleeves for electrical cable and cable bundles made from Meta-aramid fibres and provided with a water repelled protection.

Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Braided, tubular, expandable - Product standard

DL/T 1299-2009 防振锤技术条件和试验方法

Anti-vibration hammer technical conditions and test methods

DL/T 1298-2009 间隔棒技术条件和试验方法

Spacer technical conditions and test methods

IEC 60855-1:2009 带电作业.绝缘泡沫材料填充管和实心棒.第1部分:管及棒的圆形截面

This part of IEC 60855 is applicable to insulating foam-filled tubes and solid rods@ of a circular cross-section@ made of synthetic materials and intended to be used for the manufacture and construction of tools and equipment for carrying out live work on electrical systems operating at voltages above 1 kV. Tubes and rods of cross-section other than circular are not covered by this part of IEC 60855.

Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section

IEEE Std C135.62-2009 镀锌锻造锚枷锁用IEEE标准

This standard covers the dimensional, strength, and testing requirements for zinc coated forged anchor shackles used in overhead transmission and distribution line construction.

IEEE Standard for Zinc-Coated Forged Anchor Shackles

DL/T 415-2009 带电作业用火花间隙检测装置

本标准规定了带电检测盘形悬式绝缘子的火花间隙检测装置的型式、技术要求、试验方法、检验规则、标志、包装和贮存等。 本标准适用于带电检测63kV～500kV发电厂、变电所和输电线路用盘形悬式绝缘子串零值或低值绝缘子的可调式固定火花间隙检测装置，同时也适用根据需要增加蜂鸣器功能的可调式固定火花间隙检测装置。

Check and measure device of spark gap for live working

DL/T 756-2009 悬垂线夹

本标准规定了悬垂线夹的型式、技术要求、材料工艺等内容，适用于架空线路的直线杆塔导线、地线用螺栓紧固型悬垂线夹。 非直线杆塔固定跳线用悬垂线夹可参照本标准。

Suspension Clamp

DL/T 758-2009 接续金具

本标准规定了架空线路用接续金具在设计、制造、试验、验收及标志与包装等方面的要求。 本标准适用于额定电压10kV及以上架空线路导线、地线用接续金具。 对10kV以下线路使用的接续金具可参照本标准。对于在严重腐蚀、污秽的环境、高海拔地区、高寒地区等条件下使用的金具尚应满足其他相关标准的规定

Splicing fitting

DL/T 1125-2009 10kV带电作业用绝缘服装

本标准规定了交流电力系统中带电作业用绝缘服装的分类、要求、试验、标志、包装、储存等。 本标准适用于在交流 10kV 及以下电压等级的电气设备上进行带电作业时,保护作业人员免遭电击的由EVA树脂材料制成的绝缘服装。本标准不适用于由橡胶材料制成的绝缘服装。

Insulating clothes for live working on 10kV lines

DL/T 1109-2009 输电线路张力架线用张力机通用技术条件

本标准规定了张力机的产品型式、主要技术参数、技术要求、试验方法、检验规则等内容,作为设计、制造、试验及验收的技术依据。 本标准适用于架空输电线路用于展放导线、地线、光缆等的张力机。

General technology specification for tensioners pulling conductors under controlled tension of overhead transmission line

DL/T 757-2009 耐张线夹

本标准规定了耐张线夹型式和技术要求等内容。 本标准适用于架空线路、配电线路、变电站及发电厂配电装置的耐张杆塔上导线、地线终端固定及杆塔拉线终端固定用耐张线夹。

Strain Clamp

DL/T 759-2009 连接金具

本标准规定了架空线路、变电站及发电厂配电装置用连接金具在设计、制造、试验、验收及标志与包装等方面的要求。 本标准适用于额定电压10kV及以上架空线路、变电站及发电厂配电装置用连接金具。 对10kV及以下线路使用的连接金具可参照本标准；对在严重腐蚀、污秽的环境、高海拔地区、高寒地区等条件下使用的连接金具尚应满足其他相关标准的规定。

Link fitting

NF C11-241-1/A1:2009 交流电压超过45千伏的架空电线.第1部分:通用规范的一般要求

Overhead electrical lines exceeding AC 45 kV - Part 1 : general requirements - Common specifications.

IEC 61243-1:2009 带电作业.电压检测器.第1部分:电压超过交流1kV用电容型

Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.