L01 技术管理 标准查询与下载

GOST 31315-2015 电子密封设备. 通用技术要求

Electronic sealing devices. General technical requirements

KS X ISO/IEC 21827:2014 信息技术.系统安全工学.组织成熟度评估模式(SSE.CMM)

Information technology — Security techniques — Systems Security Engineering — Capability Maturity Model®(SSE-CMM®)

DB31/ 792-2014 硅单晶及其硅片单位产品能源消耗限额

本标准规定了硅单晶和硅单晶片单位产品能源消耗(以下简称能耗)限额的要求、计算原则、计算范围、计算方法和节能管理与措施。 本标准适用于硅单晶，包括半导体级硅单晶、太阳能级硅单晶；硅单晶片，包括半导体器件用硅单晶片和光伏太阳能电池用硅单晶片(以下统称硅片)生产企业产品能耗的计算、考核以及对新建项目的能耗控制。

Norm of energy consumption per unit products for monocrystalline silicon and silicon wafers

SB/T 11052-2013 电子商务售后服务评价准则

本标准规定了电子商务商品售后评价的术语和定义、消费者(用户)对制造商(销售商)所提供商品售后服务工作进行的评价准则;规定了通过互联网购物的一般商品售后服务要求,规定了电子商务商品售后评价要素和电子商务商品售后评价指标。本标准适用于各类型互联网营销活动售后服务评价;涵盖了用商品或依托于商品售后服务营销的售后服务评价准则。本标准不适用于专业商品的特性售后服务要求;不适用于银行代缴费、旅行及航空客票预订、保险、电视购物、电话购物、电话卡业务及无形商品的售后服务评价准则。

Rules for e-commerce after-sale service evaluation

KS X ISO/IEC 10181-4:2013 信息技术.开放式系统互联.开放系统的保安框架.第4部分:否认防止

개방 시스템에서 보안 구조에 대한 이 표준의 권고들은 개방 시스템 환경에서의 정보 보호 서비스응용을 나타내는데, 여기에서 “개방 시스템(Open System)”은 데이터베이스, 분산 응용, 개방 분산 처리와 OSI와 같은 영역을 포함한다. 보안 구조는 시스템에서의 시스템과 객체, 그리고 시스템 간의상호작용을 이용하여 제공하는 보호를 제공하는 방법을 규정하는 것과 연관이 있다. 보안 구조는 시스템 혹은 메커니즘을 구성하기 위한 방법론과는 관련이 없다.보안 구조는 특정 보안 서비스를 얻기 위해 사용되는 데이터 요소와 동작 순서(그러나 프로토콜 요소는 아님.)를 기술하고 있다. 이들 보안 서비스는 시스템 간에 데이터 교환과 시스템에 의한 데이터관리뿐만 아니라 시스템의 개체들이 통신하는 데 적용된다.이 표준의 권고에서는 다음에 대해 기술한다.― 부인 방지 기본 개념 정의― 일반적인 부인 방지 서비스 정의― 부인 방지 서비스를 제공할 수 있는 가능한 메커니즘을 확인― 부인 방지 서비스와 메커니즘을 위한 일반적인 관리 요구사항을 확인다른 보안 서비스처럼 부인 방지도 단지 특별한 응용을 위해 정의된 보안 정책 환경 내에서만 제공된다. 보안 정책 정의는 이 표준의 권고 범위를 벗어난다.이 표준의 권고 범위는 부인 방지를 이루기 위하여 수행되는 데 필요한 프로토콜 교환의 자세한 명세를 포

Information technology — Open System Interconnection — Security Framework in Open Systems – Part 4: Non-Repudiation

KS X ISO/IEC 17998:2013 信息技术.服务方向体系结构.SOA管理框架

이 표준은 조직이 SOA 거버넌스를 이해하고 효율적으로 사용할 수 있도록 하는 맥락과 정의를 제공하는 프레임워크에 대해 설명한다. 이 표준은 다음 사항을 정의한다.― SOA 거버넌스, IT 및 EA 거버넌스: 이것은 조직에 대한 SOA의 도입이 거버넌스에 미치는 영향을 조직이 이해하는 데 도움이 된다.― SOA 거버넌스 참조 모델(SGRM) 및 그 구성 요소: 이것은 조직이 거버넌스 제도를 규정하고 일반적인 접근을 위한 기초로서 최선의 실행을 확보하는 데 도움이 된다.― SOA 거버넌스 지속 방법(SGVM): 이것은 조직이 SOA 거버넌스 참조 모델을 지정하고 조직의SOA 거버넌스 제도를 구현하는 데 도움이 된다.이 표준은 제공된 바에 따라 사용되는 것을 의도하지 않는다. 이 표준은 조직이 적절한 SOA 거버넌스를 생성하기 위해 맞춰서 사용되는 것을 의도하고 있다. 대부분의 리스트는 비규범적이고 예시적인 것이며, 커스터마이제이션(customization) 프로세스에 대한 입력으로서 여과되어야 한다.이 표준은 SOA 거버넌스를 이해하고 응용하는 데 중요한 SOA의 기본과 가치에 관한 설명에 대해서는 포함하지 않는다. SOA 기초에 관해서는 많은 다른 규격서와 서적을 통해 입수할 수 있다.

Information Technology — Service Oriented Architecture — SOA Governance Framework

JIS Q 20000-2:2013 信息技术.服务管理.第2部分:服务管理系统应用导则

Information technology -- Service management -- Part 2: Guidance on the application of service management systems

KS C IEC 60615:2013 微波装置用语

이 표준은 마이크로파 측정 장치와 마이크로파 측정 기술에 적용한다.

Terminology for microwave apparatus

GOST R 55767-2013 欧洲电子能力框架2.0. 第1部分.

Information technology. European e-Competence Framework 2.0. Part 1. A common European framework for ICT professionals in all industry sectors

BS CWA 16458:2012 欧洲ICT专业人员配置文件

European ICT Professional Profiles

KS X ISO/IEC TR 29163-1:2011 信息技术.可共享内容对象参考模型(SCORM)2004第三版.第1部分:概要

? ??? SCORM? ?? ???? ????? SCORM 2004 ?3?? ?? ????

Information technology-Sharable Content Object Reference Model(SCORM) 2004 3rd Edition-Part 1:Overview

DB31/ 506-2010 集成电路晶圆制造能源消耗限额

The quota of energy consumption of Manufacting Integrated Circuit(IC) Wafer

KS X ISO/IEC 19778-3:2009 信息技术.学习、教育和培训.协作技术.协作工作场所.第3部分:协作组数据模型

? ??? ?? ??? ??? ??? ????.?? ?? ??? ??? ?? ??

Information technology-Learning, education and training-Collaborative technology-Collaborative workplace-Part 3:Collaborative group data model

KS X ISO/IEC 19778-1:2009 信息技术.学习、教育和培训.协作技术.协作工作场所.第1部分:协作工作场所数据模型

? ??? ???, ??, ?? ??? ? ?????? ??? ???? ?? ?? ???

Information technology-Learning, education and training-Collaborative technology-Collaborative workplace-Part 1:Collaborative workplace data model

ISO/IEC 19778-3:2008 信息技术.学习、教育和培训.协作技术.协作工作场所.第3部分:协作组数据模型

1.1 Statement of scope This part of ISO/IEC 19778 specifies the Data Model for a collaborative group. The collaborative group Data Model composes roles which can be played by the participants of a collaborative group, declares the intended role holders (positions for playing a particular role) for each role, and (at least during the life-span of the collaborative workplace) assigns participants to these role holders. The role names may be used as references to roles specified in detail by further specifications or standards. Where no such specifications or standards are available or identified, the provision of descriptions for human interpretation may support harmonized use of these names. Provided participant identifiers may be used as references to detailed participant information which may be specified in a provided user management system. NOTE There is a risk of improper access and misuse of personal and private data facilitated by use of the collaborative group Data Model. It is the responsibility of the implementer to ensure proper use of any involved personal information. 1.2 Subjects and aspects not currently addressed In future editions of this part of ISO/IEC 19778, the identification of participant types referring to a harmonized or standardized participant typology may be provided. Such a provision would upgrade the value of anonymized collaborative group Data Model instantiations for being reused as templates. Currently, the collaborative groups specified by this Data Model are static. Participants may not be online all the time; in a collaborative group, private discussions may occur; participants may leave the collaborative group during the life-state of the collaborative workplace. It is not yet clear to which degree such aspects can and should be addressed in future editions of this part of ISO/IEC 19778. 1.3 Excluded subjects and aspects Subjects and aspects not provided by this part of ISO/IEC 19778, but which it is anticipated will be provided by further specifications or standards include: - the detailed specification of roles or role typologies in the context of learning, education and training (such specification is reserved for further specifications or standards; it may be specific for particular domains of applications in this field; such specifications are excluded from this part of ISO/IEC 19778); - methods for assigning collaborative tools or collaborative functions of a collaborative workplace to participants in particular roles (such methods mean optimization for mapping capabilities and requirements of technical means to capabilities and preferences of participants; such methods are excluded from this part of ISO/IEC 19778); - the detailed specification of participant information (such specification is reserved for further specifications or standards and is excluded from this part of ISO/IEC 19778).

Information technology - Learning, education and training - Collaborative technology - Collaborative workplace - Part 3: Collaborative group data model

ISO/IEC 19778-2:2008 信息技术.学习、教育和培训.协作技术.协作工作场所.第2部分:协作环境数据模型

1.1 Statement of scope This part of ISO/IEC 19778 specifies the Data Model for a collaborative environment. The collaborative environment Data Model composes collaborative tools and declares their collaborative functions by specifying their names. These names may be used as references to collaborative tools and collaborative functions specified in detail by further specifications or standards. Where no such specifications or standards are available or identified, the provision of descriptions for human interpretation may support harmonized use of these names. 1.2 Subjects and aspects not currently addressed In future editions of this part of ISO/IEC 19778, extended support for adapting collaborative environments to preferences and needs of participants may be provided. Such support may be gained by prioritizing the collaborative effects (defining which collaborative effects are intended to be supported) in contrast to the collaborative tools and collaborative functions (defining by which technical provisions the intended collaborative effects are supported). 1.3 Excluded subjects and aspects Subjects and aspects not provided by this part of ISO/IEC 19778, but which it is anticipated will be provided by further specifications or standards include: - the detailed specification of collaborative tools or collaborative functions (such specification is left to further specifications or standards and means service component harmonization which is excluded from this part of ISO/IEC 19778); - the detailed specification of collaborative effects (such specification is left to further specifications or standards and addresses application modelling which is excluded from this part of ISO/IEC 19778); - the specification of methods for integrating collaborative tools or collaborative functions into services (as this affects service modelling which is excluded from this part of ISO/IEC 19778).

Information technology - Learning, education and training - Collaborative technology - Collaborative workplace - Part 2: Collaborative environment data model

ISO/IEC 19778-1:2008 信息技术.学习、教育和培训.协作技术.协作工作场所.第1部分:协作工作场所数据模型

1.1 Statement of scope 1.1.1 ISO/IEC 19778 ISO/IEC 19778 is applicable to collaborative technologies used to support communication among learners, instructors and other participants. The implementation and communicative use of these technologies entails the creation of information related to participant groups, and to the collaborative environments, functions and tools that are set up for, and used by, these groups. This part of ISO/IEC 19778 – together with its subsequent parts – defines Data Models that enable the portability and reuse of this data in integrated form, and allow Data Model instantiations to be interchanged, stored, retrieved, reused or analysed by a variety of systems. 1.1.2 This part of ISO/IEC 19778 This part of ISO/IEC 19778 specifies a table-based approach for defining Data Models. This Data Model specification is used for specifying the collaborative workplace Data Model. The same Data Model specification is also used in ISO/IEC 19778-2 and ISO/IEC 19778-3 to define the related components of the collaborative environment (ISO/IEC 19778-2) and the collaborative group (ISO/IEC 19778-3) in separate Data Models. 1.2 Subjects and aspects not currently addressed in ISO/IEC 19778 Further parts or future new editions of the existing parts of ISO/IEC 19778 are anticipated. They include the following. • Internationalization (e.g. national alternatives for the values of textual, descriptive Data Elements). • Bindings for the Data Models of Parts 1, 2, and 3 will be provided by additional parts. • Best practice guides for the use of Parts 1, 2, and 3 will be provided by additional parts. • Enabling the concurrent use of several international languages in Parts 1, 2, and 3 will be reflected by future editions. • Any lessons learnt from practicing Parts 1, 2, and 3 will be reflected by future editions of these parts. 1.3 Excluded subjects and aspects in ISO/IEC 19778 Beyond the scope of ISO/IEC 19778, communities of practice or standardization bodies may provide further specifications or standards which are not yet identified. These anticipated specifications or standards may either make use of ISO/IEC 19778, or may – where this is prepared for – specify value domains for Data Elements of the Data Models of ISO/IEC 19778, or may represent extensions of ISO/IEC 19778 by providing and referencing Data Models with supplementing information. Subjects and aspects not provided by ISO/IEC 19778, but anticipated to be provided by further specifications or standards, include: • the specification of roles that collaborative group members may play, including the obligations and permissions associated with these roles; • the specification of collaborative tools and their collaborative functions, including their technical capabilities and constraints; • the specification of models for collaborative applications, including the modelling of tasks, activities and objectives of such activities. 1.4 Subjects and aspects addressed in related standards ISO/IEC 19778 is closely related to ISO/IEC 19780-1. This related International Standard enables the recording, portability and reuse of the communicative contents, the messages or expressions generated in the course of collaborative activity. The way this communicative data is recorded and captured makes use of collaborative workplace, collaborative group and collaborative environment Data Model Elements.

Information technology - Learning, education and training - Collaborative technology - Collaborative workplace - Part 1: Collaborative workplace data model

NS 8353-2008 计算机辅助设计(CAD)手册用技术产品文献结构图要求

Technical product documentation Construction drawings Requirements for CAD manuals

CEA-CEB19-2007 推荐扬声器安全守则

The properties of the Logical Units’ user interfaces originating from a physical device are available using the GET IPaddr/2027_file command, where the IPaddr is the IP address of the physical device in dotted decimal notation in ASCII. Service devices shall return an XML document, see [6], describing all device supported Logical Units as the concatenation of all Logical Unit block descriptions. The schemas for the 2027 file and opcodes in Annex B are informative.

Recommended Loudspeaker Safety Practices

SL 380-2007 水资源监控管理数据库表结构及标识符标准

本标准适用于水行政主管部门及相关单位水资源监控信息，可满足水资源监控管理数据库建设，以及相关的数据查询、信息发布和应用服务软件开发的需要。

Standard for structure and identifier in water resources monitoring and management database