L05 可靠性和可维护性 标准查询与下载

NF C20-343:2011 电子元件.可靠性.换算用失效率和应力模型的基准条件

Electric components - Reliability - Reference conditions for failure rates and stress models for conversion.

BS EN 61709:2011 电气部件.可靠性.故障率和应力模型转换的参考条件

Electric components. Reliability. Reference conditions for failure rates and stress models for conversion

DIN EN 60300-3-12:2011 可靠性管理.第3-12部分:应用指南.集成逻辑支持(IEC 60300-3-12-2011).德文版本EN 60300-3-12-2011

Dependability management - Part 3-12: Application guide - Integrated logistic support (IEC 60300-3-12:2011); German version EN 60300-3-12:2011

BS EN 60300-3-12:2011 可靠性管理.应用指南.综合后勤支援

This part of IEC 60300 is an application guide for establishing an integrated logistic support (ILS) management system. It is intended to be used by a wide range of suppliers including large and small companies wishing to offer a competitive and quality item which is optimized for the purchaser and supplier for the complete life cycle of the item. It also includes common practices and logistic data analyses that are related to ILS.

Dependability management. Application guide. Integrated logistic support

IEC 61709:2011 电子元器件.可靠性.转换用故障率和应力模型的基准条件

This International Standard gives guidance on how failure rate data can be employed for reliability prediction of electric components in equipment. Reference conditions are numerical values of stresses that are typically observed by components in the majority of applications. Reference conditions are useful since they are the basis of the calculation of failure rate under any conditions by the application of stress models that take into account the actual operating conditions. Failure rates stated at reference conditions allow realistic reliability predictions to be made in the early design phase. The stress models described herein are generic and can be used as a basis for conversion of the failure rate data at these reference conditions to actual operating conditions when needed and this simplifies the prediction approach. Conversion of failure rate data is only permissible within the specified functional limits of the components. This standard also gives guidance on how a database of component failure data can be constructed to provide failure rates that can be used with the included stress models. Reference conditions for failure rate data are specified@ so that data from different sources can be compared on a uniform basis. If failure rate data are given in accordance with this International Standard then no additional information on the specified conditions is required. This standard does not provide base failure rates for components ?C rather it provides models that allow failure rates obtained by other means to be converted from one operating condition to another operating condition. The prediction methodology described in this standard assumes that the parts are being used within its useful life. The methods in this standard have a general application but are specifically applied to a selection of component types as defined in Clause 6 and Clause E.2.

Electric components - Reliability - Reference conditions for failure rates and stress models for conversion

IEC 60300-3-12:2011 可靠性管理.第3-12部分:应用指南.集成逻辑支持

Dependability management - Part 3-12: Application guide - Integrated logistic support

JIS C 5750-3-4:2011 可靠性管理.第3-4部分:应用指南.可靠性要求的规范指南

Dependability management -- Part 3-4: Application guide -- Guide to the specification of dependability requirements

JIS C 5750-4-3:2011 可靠性管理.第4-3部分:系统可靠性分析技术.失效模式及后果分析(FMEA)规程

Dependability management -- Part 4-3: Analysis techniques for system reliability -- Procedure for failure mode and effects analysis (FMEA)

JIS C 5750-4-4:2011 可靠性管理.第4-4部分:系统可靠性用分析技术.故障树分析(FTA)

Dependability management -- Part 4-4: Analysis techniques for system reliability -- Fault Tree Analysis (FTA)

ANSI/UL 60950-22-2011 信息技术设备安全标准.安全性.第22部分:户外安装型设备

(1) Proposed Addition of UL 50E and CAN/CSA C22.2 No. 94.2 as Alternative Component Standards and (2) Proposal to Update References Based on the Latest Versions of the National Electrical Code (NEC) and the Canadian Electrical Code (CEC)

Standard for Safety for Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors

ANSI/VITA 51.2-2011 失效可靠性的物理学预测

This specification provides standard processes, instructions and default parameters for using the Physics of Failure (PoF) approach for modeling the reliability of electronic products. It includes a discussion of the philosophy, context for use, definitions, models for key failure mechanisms, definition of the input data required, default values if technically feasible or the typical range of values as a guideline. It defines how modeling results are interpreted and used. It requires the documentation of modeling inputs, assumptions made during the analysis, modifications to the models and rationale for the analysis.

Physics of Failure Reliability Predictions

NF C20-300-3-9*NF EN 31010:2010 风险管理.风险评估技术

Risk Management - Risk Assessment Techniques.

NF C20-790-5-3:2010 静电学.第5-3部分:电子设备静电防护.静电放电灵敏型设备用特性和要求分类

Electrostatics - Part 5-3 : protection of electronic devices from electrostatic phenomena - Properties and requirements classifications for packaging intended for electrostatic discharge sensitive devices.

IEC 107/126/PAS:2010 IEC/PAS 62686-1,Ed. 1:高可靠性元件一般要求.第1部分:集成电路和分立半导体元件

IEC/PAS 62686-1, Ed. 1:General requirements for high reliability components -Part 1: Integrated circuits and discrete semiconductors

BS 5760-18:2010 系统、设备与部件的可靠性.可靠性要求演示指南.机箱的可靠性

This part of BS 5760 provides a description of the principles of the dependability case and provides guidance on its content and application in systems engineering. The dependability case can be used throughout the life cycle, from concept and definition, through design and development; manufacture and installation, to operations and maintenance; mid?life enhancement, and eventual disposal. Whilst this part of BS 5760 is primarily intended for application by the system developers, it will be of value to bodies who might be contracted to manage the dependability case for a project, where deemed necessary. This part of BS 5760 has five main clauses which describe: a) principles of the dependability case (Clause 5); b) development of the dependability case (Clause 6); c) providing the evidence (Clause 7); d) presenting the evidence (Clause 8); e) assessing the adequacy of the evidence (Clause 9). The activities required for the achievement of dependability depend on the nature and development state of the system and are likely to vary significantly from one project to another. The guidelines are not to be considered as being prescriptive in nature: they are generic and do not attempt to be exhaustive. Annex A describes the general requirements for the dependability case and dependability case report Annex B provides examples of dependability management risks at different stages of a system’s life cycle. Annex C provides a checklist of points for assessing the adequacy of evidence. The checklist is not to be considered to be prescriptive or exhaustive; it is generic and provides guidance to supplement the generic guidance provided in Clause 8. Annex D describes the dependability risk reduction process shown in Figure 7 using illustrative examples where appropriate. Annex E describes the dependability evidence framework, expanding on the information given in 5.1. Whilst this part of BS 5760 does not specifically address safety cases, the same principles can be applied.

Reliability of systems, equipment and components - Guide to the demonstration of dependability requirements - The dependability case

DIN EN 60300-3-11:2010 可靠性管理.第3-11部分:应用指南.可靠性为中心的维修

This part of IEC 60300 provides guidelines for the development of failure management policies for equipment and structures using reliability centred maintenance (RCM) analysis techniques. This part serves as an application guide and is an extension of IEC 60300-3-10, IEC 60300-3-12 and IEC 60300-3-14. Maintenance activities recommended in all three standards, which relate to preventive maintenance, may be implemented using this standard. This standard is restricted to the application of RCM techniques and does not include aspects of maintenance support, which are covered by the above mentioned standards or other dependability and safety standards.

Dependability management - Part 3-11: Application guide - Reliability centred maintenance (IEC 60300-3-11:2009); German version EN 60300-3-11:2009

DIN EN 60300-3-15:2010 可靠性管理.第3-15部分:应用指南.系统可靠性技术 (IEC 60300-3-15-2009); 德文版本 EN 60300-3-15-2009

Dependability management - Part 3-15: Application guide - Engineering of system dependability (IEC 60300-3-15:2009); German version EN 60300-3-15:2009

ANSI/VITA 51.3-2010 支持可靠性预测中鉴定和环境压力筛选

This standard provides rules, permissions, and observations to assure that cost effective Qualification and Environmental Stress Screening support valid reliability predictions and enhance electronics reliability. It includes a discussion of the systems engineering relationships between Qualification, Environmental Stress Screening, and reliability.

Qualification and Environmental Stress Screening in Support of Reliability Predictions

ANSI/IEEE 1413:2010 硬件可靠性预计用标准框架

This standard provides the framework for performing and reporting reliability predictions. It applies to hardware products including electronic, electrical, and mechanical devices and assemblies.

Standard Framework for Reliability Prediction of Hardware

KS A IEC 62429:2009 可靠性成长.独特复合系统的早期故障压力测试

이 표준은 ‘유일 복합 시스템’의 최종 시험이나 수락 시험에서 신뢰성 성장에 관한 지침을

Reliability growth-Stress testing for early failures in unique complex systems