L17 电感器、变压器 标准查询与下载

ANSI/IEEE C57.13.2:2005 仪表用变压器标准合格测试程序

Describes the tests and documentary requirements for conducting a conformance test on instrument transformers. Covers test requirements and control functions on 60 Hz primary systems with voltages from 600 volts through 38 kV.

Standard Conformance Test Procedure for Instrument Transformers

DLA MIL-PRF-83446 C SUPP 1-2005 固定或可拆卸射频贴片电感器的一般规定

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.

COILS, RADIO FREQUENCY, CHIP, FIXED OR VARIABLE, GENERAL SPECIFICATION FOR

DIN EN 62025-2:2005 高频感应部件.非电气特性和测量方法.第2部分:非电气特性的试验方法

This part of IEC 62025 specifies a test method for the non-electrical characteristics of the Surface Mounted Device (SMD) inductors to be used for electronic and telecommunication equipment. The object of this standard is to define methods for measuring mechanical performance only.

High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (IEC 62025-2:2005); German version EN 62025-2:2005

SANS 60044-5:2005 仪表用变压器．第5部分：电容电压互感器

Applies to new single-phase capacitor voltage transformers connected between line and ground for system voltages Um = 72,5 kV at power frequencies from 15 Hz to 100 Hz. They are intended to supply a low voltage for measurement, control and protective fun

Instrument transformers Part 5: Capacitor voltage transformers

IEC 61605:2005 电子和电信设备用固定电感器.标记代码

Specifies marking codes for fixed inductors. Covers the inductance values and their tolerances as well as dates.

Fixed inductors for use in electronic and telecommunication equipment - Marking codes

BS EN 62025-2:2005 高频感应部件.非电气特性和测量方法.非电气特性的试验方法

This part of IEC 62025 specifies a test method for the non-electrical characteristics of the Surface Mounted Device (SMD) inductors to be used for electronic and telecommunication equipment. The object of this part of IEC 62025 is to define methods for measuring mechanical performance only. As the reliability performances and specifications relative to non-electrical performances are defined in IEC 62211, detailed measuring methods for mechanical performance of reliability testing are defined in this part of IEC 62025.

High frequency inductive components. Non-electrical characteristics and measuring methods. Test methods for non-electrical characteristics

NF C93-348-4*NF EN 60852-4:2005 电信和电子设备用变压器和电感器的外形尺寸.第4部分:使用YUI-2叠片结构的变压器和电感器

Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4 : transformers and inductors using YUI-2 laminations.

NF C93-347:2005 电感器和变压器用磁氧化EP磁芯及其附件.尺寸

Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions.

IEC 62025-2:2005 高频感应部件.非电气特性和测量方法.第2部分:非电气特性的试验方法

Specifies a test method for the non-electrical characteristics of the surface mounted device inductors to be used for electronic and telecommunication equipment. Defines methods for measuring mechanical performance only. To be used in conjunction with IE

High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics

DLA MIL-PRF-27 F VALID NOTICE 1-2005 (音频,电源和高功率脉冲)变压器和电感器的的一般规格

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil

TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR

IEEE Std C57.13.2-2005 仪表互感器一致性测试程序的 IEEE 标准

Describes the tests and documentary requirements for conducting a conformance test on instrument transformers. Covers test requirements and control functions on 60 Hz primary systems with voltages from 600 volts through 38 kV.

IEEE Standard for Conformance Test Procedure for Instrument Transformers

SJ 20903-2004 军用电子设备电子变压器绝缘处理通用要求

General specification for electronic supply-transformers use in military electronic equipment

SJ 20905-2004 小型变压器灌封工艺规定

Potting technics specification for minitype transformer

BS EN 60044-5:2004 仪表互感器.电容电压互感器

This part of IEC 60044 applies to new single-phase capacitor voltage transformers connected between line and ground for system voltages Um ≥ 72,5 kV at power frequencies from 15 Hz to 100 Hz. They are intended to supply a low voltage for measurement, control and protective functions. The capacitor voltage transformer can be equipped with or without carrier-frequency accessories for power line carrier-frequency (PLC) application at carrier frequencies from 30 kHz to 500 kHz. This standard replaces IEC 60186 regarding capacitor voltage transformers. Three standards formed the basis for this IEC 60044-5 standard: - IEC 60044-2, concerning inductive voltage transformers; - IEC 60358, concerning coupling capacitors and capacitor dividers; - IEC 60481, concerning coupling devices for power line carrier (PLC) systems. The measurement application includes both indication measuring and revenue measuring. NOTE Diagrams of capacitor voltage transformer to which this standard applies are given in Figures A.1 and A.2.

Instrument transformers - Capacitor voltage transformers

NF C42-544-5:2004 仪表互感器.第5部分:电容电压互感器

Instrument transformers - Part 5 : capacitor voltage transformers.

DIN EN 62211:2004 电感元件.可靠性管理

Inductive components - Reliability management (IEC 62211:2003); German version EN 62211:2004

NF C93-373:2004 电感元件.可靠性管理

Inductive components - Reliability management.

CEA WHITE PAPER-2004 音频/视频网络能力的装置的电源管理

The objective of this report is to investigate the following topics for incorporation into the R7.5 architecture for audio/video (A/V) networks:

Power Management for A/V Network- Capable Devices

IEC 60044-5:2004 互感器.第5部分:电容电压互感器

This part of IEC 60044 applies to new single-phase capacitor voltage transformers connected between line and ground for system voltages Um 72,5 kV at power frequencies from 15 Hz to 100 Hz. They are intended to supply a low voltage for measurement, contr

Instrument transformers - Part 5: Capacitor voltage transformers

JIS C 1736 ERRATUM 1:2004 勘误

ERRATUM