N20 电工仪器、仪表综合 标准查询与下载

CISPR 16-4-2 AMD 1-2014 无线电干扰和抗干扰测量设备和方法的规格. 第4-2部分: 不确定度, 统计和限值模型. 测量仪表的不确定性

Specification for radio disturbance and immunity measuring apparatus and methods.Part 4-2: Uncertainties, statistics and limit modelling-Measurement instrumentation uncertainty

IEC 62761:2014 无线电频率 (RF) 中表面声波 (SAW) 和体声波 (BAW) 设备的非线性测量方法指南

Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF)

JIS C 1010-2-30:2014 测量、控制和试验室用电气设备的安全性要求.第2-30部分:电路测量和试验用详细要求

Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-30: Particular requirements for testing and measuring circuits

JIS C 1010-1:2014 测量、控制和实验室用电气设备的安全性要求.第1部分:通用要求

Safety requirements for electrical equipment for measurement, control, and laboratory use.Part 1: General requirements

DIN EN 55016-2-1:2014 无线电干扰和抗扰测量仪及方法用规范.第2-1部分:干扰和抗扰度的测量方法.传导干扰测量(CISPR 16-2-1-2008+A1-2010+A2-2013).德文版本EN 55016-2-1-2009+A1-2011+A2-2013

Specification for radio disturbance and immunity measuring apparatus and methods.Part 2-1: Methods of measurement of disturbances and immunity.Conducted disturbance measurements (CISPR 16-2-1:2008 + A1:2010 + A2:2013); German version EN 55016-2-1:2009 + A

DIN EN 61010-2-201:2014 测量、控制和实验室用电气设备的安全性要求.第2-201部分:控制设备的详细要求(IEC 61010-2-201-2013).德文版本EN 61010-2-201-2013+AC-2013

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (IEC 61010-2-201:2013); German version EN 61010-2-201:2013 + AC:2013

JB/T 7081-2013 电工专用试验仪器设备型号编制方法

本标准规定了电工专用试验仪器设备的型号编制方法。本标准适用于采用电子学、电工学方法测量电学量和其他参量的电工专用试验仪器设备。

Type organization method for electrical special test equipment

NF C44-056-8-3*NF EN 62056-8-3:2013 电量测量数据交换.DLMS/COSEM套件.第8-3部分:社区网络PLC S-FSK通讯配置文件

Electricity metering data exchange - The DLMS/COSEM suite - Part 8-3 : communication profile for PLC S-FSK neighbourhood networks

NF C44-056-6-1:2013 电量测量数据交换.DLMS/COSEM套件.第6-1部分:目标识别系统(OBIS)

Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1 : Object Identification System (OBIS)

NF C44-056-7-6*NF EN 62056-7-6:2013 电量测量数据交换.DLMS/COSEM套件.第7-6部分:3层面向连接的HDLC基础通讯配置文件

Electricity metering data exchange - the DLMS/COSEM suite - Part 7-6 : the 3-layer, connection-oriented HDLC based communication profile

NF C46-050-2-6*NF EN 61326-2-6:2013 测量, 控制和实验室使用电气设备. EMC要求. 第2-6部分: 详细要求. 体外诊断(IVD)医疗设备

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6 : particular requirements - In vitro diagnostic (IVD) medical equipment

DIN EN 61326-2-6:2013 测量, 控制和实验室用电气设备. 电磁兼容性 (EMC) 要求. 第2-6部分:特殊要求. 体外诊断 (IVD) 医用设备 (IEC 61326-2-6-2012); 德文版本EN 61326-2-6-2013

Electrical equipment for measurement, control and laboratory use - EMC requirements.Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment (IEC 61326-2-6:2012); German version EN 61326-2-6:2013

DIN EN 61326-2-2:2013 测量, 控制和实验室用电气设备. 电磁兼容性 (EMC) 要求. 第2-2部分:特殊要求. 用于便携式试验, 测量和监控低压配电系统用设备的试验配置, 操作条件和性能标准 (IEC 61326-2-2-2012); 德文版本EN 61326-2-2-2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in lo

DIN EN 61326-2-1:2013 测量, 控制和实验室使用电气设备. EMC要求. 第2-1部分: 详细要求. EMC无保护应用敏感试验和测量设备的试验配置, 操作条件和性能标准(IEC 61326-2-1-2012); 德文版本EN 61326-2-1-2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected

BS EN 61083-2:2013 高压和高电流试验中测量用仪器和软件.电压和电流冲击试验用软件的要求

Instruments and software used for measurement in high-voltage and high-current tests. Requirements for software for tests with impulse voltages and currents

ANSI/ESD STM5.2-2012 机械模型(MM).元件水平

This document establishes the procedure for testing, characterizing, and evaluating the electrostatic discharge (ESD) sensitivity (withstand voltage) of components subjected to the defined machine model (MM).

Machine Model (MM) - Component Level

DIN EN 61010-2-032:2013 测量、控制和试验室用电气设备的安全性要求.第2-032部分:电气测量和试验用手持和用手控制电流感应器的详细要求(IEC 61010-2-032-2012).德文版本EN 61010-2-032-2012

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032:2012); German version E

IEC 61326-3-2:2008/ISH1:2013 测量, 控制和实验室用电气设备. 电磁兼容性 (EMC) 要求. 第3-2部分: 与安全相关的系统和用于与执行安全相关的功能设备 (功能安全) 用抗扰度要求. 带指定电磁环境的工业设施. 说明表单1

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety related functions (functional safety) - Industrial applications w

IEC 62056-5-3:2013 电能测量数据交换. DLMS/COSEM程序组. 第5-3部分: DLMS/COSEM应用层

This part of IEC 62056 specifies the DLMS/COSEM application layer in terms of structure,services and protocols for COSEM clients and servers, and defines how to use the DLMS/COSEM application layer in various communication profiles.

Electricity metering data exchange.The DLMS/COSEM suite.Part 5-3: DLMS/COSEM application layer

NF C46-050-2-5*NF EN 61326-2-5:2013 测量, 控制和实验室用电气设备 - 电磁兼容性 (EMC) 要求 - 第2-5部分: 特殊要求 - 带IEC 61784-1规定现场总线接口的设备的试验配置, 操作条件和性能标准

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5 : particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1