Q62 石膏制品 标准查询与下载

DB4205/T 63-2019 磷石膏及其综合利用产品质量标准

Quality standards for phosphogypsum and its comprehensive utilization products

JC/T 2472-2018 现浇混凝土空心结构用石膏模盒

Gypsum formwork boxes for cast-in-place concrete hollow structures

JC/T 2440-2018 镂花装饰石膏板

本标准规定了镂花装饰石膏板的术语和定义、分类和标记、一般要求、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于室内吊顶和墙面用的镂花装饰石膏板。

Hollowed-out decorating gypsum board

BS EN 15824:2017 基于有机粘合剂的外部抹灰和内部抹灰规范

Specifications for external renders and internal plasters based on organic binders

DIN EN 15824:2017 基于有机粘合剂的外部抹灰和内部灰泥规范；德文版 EN 15824:2017

This European Standard is applicable to factory-made renders and plasters based on organic binders used for external or internal covering on walls, columns, partitions and ceilings. The products are manufactured in paste form, ready to use, or in powder form. This European Standard is also applicable to renders and plasters with inorganic binders such as silicates, silanes, siloxanes and silicones. This European Standard contains definitions and final performance requirements. It includes relevant characteristic categories to designate renders and plasters.

Specifications for external renders and internal plasters based on organic binders; German version EN 15824:2017

BS EN 14209:2017 预制石膏板檐口 定义、要求和测试方法

Preformed plasterboard cornices. Definitions, requirements and test methods

BS EN 13915:2017 带蜂窝纸板芯的预制石膏板面板.定义、要求和试验方法

Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods

ASTM C471M-17ae1 石膏和石膏制品的化学分析标准试验方法(公制)

1.1 These test methods cover the chemical analysis of gypsum and gypsum panel products, including gypsum ready-mixed plaster, gypsum wood-fibered plaster, and gypsum concrete. 1.2 The test methods appear in the following order:     Sections   Preparation of Sample 4   Complete Procedure 5 – 16   Alternative Procedure for Analysis of Free Water in 17   8201;8201;8201;8201;8201;Gypsum Using a Moisture Balance     Alternative Procedure for Analysis of Combined Water in 18   8201;8201;8201;8201;8201;Gypsum Using a Moisture Balance     Alternative Procedure for Analysis for Calcium Sulfate by 19   8201;8201;8201;8201;8201;Ammonium Acetate Method

Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

ASTM C471M-17e1 石膏和石膏制品(公制)化学分析的标准试验方法

1.1 These test methods cover the chemical analysis of gypsum and gypsum panel products, including gypsum ready-mixed plaster, gypsum wood-fibered plaster, and gypsum concrete. 1.2 The test methods appear in the following order:     Sections   Preparation of Sample 4   Complete Procedure 5 – 16   Alternative Procedure for Analysis of Free Water in 17   8201;8201;8201;8201;8201;Gypsum Using a Moisture Balance     Alternative Procedure for Analysis of Combined Water in 18   8201;8201;8201;8201;8201;Gypsum Using a Moisture Balance     Alternative Procedure for Analysis for Calcium Sulfate by 19   8201;8201;8201;8201;8201;Ammonium Acetate Method

Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

ASTM C1177/C1177M-17 用作防水层的玻璃纤维衬垫石膏基底的标准规格

1.1 This specification covers glass mat gypsum substrate, which is designed to be used as an exterior substrate for a weather barrier. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

ASTM C473-17 石膏板制品物理试验的标准试验方法

1.1 These test methods cover the physical testing of gypsum panel products. 1.2 The test methods appear in the following order:   Section Flexural Strength (Method A)  7 Core, End and Edge Hardness (Method A)  8 Nail Pull Resistance (Method A)  9 Flexural Strength (Method B) 11 Core, End and Edge Hardness (Method B) 12 Nail Pull Resistance (Method B) 13 Humidified Deflection 14 End Squareness 15 Nominal Thickness 16 Recessed- or Tapered Edge Depth 17 Width 18 Length

Standard Test Methods for Physical Testing of Gypsum Panel Products

ASTM C471M-17a 石膏和石膏制品的化学分析标准试验方法(公制)

1.1 These test methods cover the chemical analysis of gypsum and gypsum panel products, including gypsum ready-mixed plaster, gypsum wood-fibered plaster, and gypsum concrete. 1.2 The test methods appear in the following order:     Sections   Preparation of Sample 4   Complete Procedure 5 – 16   Alternative Procedure for Analysis of Free Water in 17   8201;8201;8201;8201;8201;Gypsum Using a Moisture Balance     Alternative Procedure for Analysis of Combined Water in 18   8201;8201;8201;8201;8201;Gypsum Using a Moisture Balance     Alternative Procedure for Analysis for Calcium Sulfate by 19   8201;8201;8201;8201;8201;Ammonium Acetate Method

Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

ASTM C840-17 石膏板的应用和修整用标准规格

1.1 This specification covers the minimum requirements for the methods of application and finishing of gypsum board, including related items and accessories. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.2.1 Where this specification is more stringent (size or thickness of framing: size and spacing of fasteners) than the fire-rated construction, this specification shall govern. 1.3 Where sound control is required for a gypsum board assembly, details of construction shall be in accordance with reports of acoustical tests of assemblies that have met the required acoustical values. 1.4 Unheated spaces above gypsum board ceilings shall be properly ventilated (see Appendix X2). 1.5 The various application systems are located in the following sections: I Application of Single-ply Gypsum Board to Wood Framing 8199;Members 8 II Application of Two-ply Gypsum Board to Wood Framing 8199;Members 9 III Application of Gypsum Board by Adhesive Nail-on to 8199;Wood Framing Members 10 IV Semi-solid Gypsum Board Partitions 11 V Solid Gypsum Board Partitions 12 VI

Standard Specification for Application and Finishing of Gypsum Board

ASTM C754-17 用螺钉安装石膏墙板的钢框构件安装的标准规格

1.1 This specification covers the minimum requirements for the installation of interior nonstructural steel framing and furring members designed to receive screw-attached gypsum panel products. The steel framing and furring members covered in this specification are limited to those complying with Specification C645. 1.2 Details of construction for a specific assembly to achieve the required fire resistance, sound or acoustic rating shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing, sound or acoustic laboratories. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

ASTM C1396/C1396M-17 石膏板的标准规格

1.1 This specification covers the gypsum boards described in 1.1.1 – 1.1.9. Note 1: Specifications C840, C841, C844 and C1280 contain application procedures for gypsum board. 1.1.1 Gypsum wallboard, designed for use on walls, ceilings, or partitions and that affords a surface suitable to receive decoration. 1.1.2 Predecorated gypsum board, designed for use as the finished surfacing for walls, ceilings, or partitions. 1.1.3 Gypsum backing board, coreboard, and shaftliner board, designed for use as a base in multilayer systems or as a gypsum stud or core in semisolid or solid gypsum board partitions, or in shaft wall assemblies. Note 2: The terms backing board, coreboard, and shaftliner board refer to different end uses. The term gypsum backing board, as used in this specification, shall include gypsum coreboard and gypsum shaftliner board unless otherwise stated. 1.1.4 Water-resistant gypsum backing board, designed primarily to be used as a base for the application of ceramic or plastic tile on walls or ceilings. This product is also suitable for decoration. 1.1.5 Exterior gypsum soffit board, designed for use on exterior soffits and carport ceilings that are completely protected from contact with liquid water. 1.1.6 Gypsum sheathing board, designed for use as sheathing on buildings. 1.1.7 Gypsum base for veneer plaster, designed for use as a base for the application of gypsum veneer plaster. 1.1.8 Gypsum lath, designed for use as a base for the application of gypsum plaster. 1.1.9 Gypsum ceiling board, designed for use on interior ceilings with framing spaced not more than 24 in. [610 mm] on center and that affords a surface suitable to receive water-based texture and other decoration. This product is also suitable for use on interior walls.

Standard Specification for Gypsum Board

ASTM C840-17a 石膏板应用和饰面的标准规格

1.1 This specification covers the minimum requirements for the methods of application and finishing of gypsum board, including related items and accessories. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.2.1 Where this specification is more stringent (size or thickness of framing: size and spacing of fasteners) than the fire-rated construction, this specification shall govern. 1.3 Where sound control is required for a gypsum board assembly, details of construction shall be in accordance with reports of acoustical tests of assemblies that have met the required acoustical values. 1.4 Unheated spaces above gypsum board ceilings shall be properly ventilated (see Appendix X2). 1.5 The various application systems are located in the following sections: I Application of Single-ply Gypsum Board to Wood Framing 8199;Members 8 II Application of Two-ply Gypsum Board to Wood Framing 8199;Members 9 III Application of Gypsum Board by Adhesive Nail-on to 8199;Wood Framing Members 10 IV Semi-solid Gypsum Board Partitions 11 V Solid Gypsum Board Partitions 12 VI

Standard Specification for Application and Finishing of Gypsum Board

ASTM C11-17a 石膏和相关建筑材料及系统相关标准术语

1.1 This standard covers terminology relating to gypsum and related building materials and systems. The terms are generically defined. More specific and expanded definitions may appear in appropriate standards. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Gypsum and Related Building Materials and Systems

ASTM C471M-17 石膏和石膏制品(公制)化学分析的标准试验方法

1.1 These test methods cover the chemical analysis of gypsum and gypsum panel products, including gypsum ready-mixed plaster, gypsum wood-fibered plaster, and gypsum concrete. 1.2 The test methods appear in the following order:     Sections   Preparation of Sample 4   Complete Procedure 5 – 16   Alternative Procedure for Analysis of Free Water in 17   8201;8201;8201;8201;8201;Gypsum Using a Moisture Balance     Alternative Procedure for Analysis of Combined Water in 18   8201;8201;8201;8201;8201;Gypsum Using a Moisture Balance     Alternative Procedure for Analysis for Calcium Sulfate by 19   8201;8201;8201;8201;8201;Ammonium Acetate Method

Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

ASTM C926-17 波特兰水泥基石膏应用的标准规格

1.1 This specification covers the requirements for the application of full thickness portland cement-based plaster for exterior (stucco) and interior work. These requirements do not by default define a unit of work or assign responsibility for contractual purposes, which is the purview of a contract or contracts made between contracting entities. 1.2 This specification sets forth tables for proportioning of various plaster mixes and plaster thickness. Note 1: General information will be found in Annex A1. Design considerations will be found in Annex A2. 1.3 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are approximate and are provided for information purposes only. 1.4 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.5 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories.

Standard Specification for Application of Portland Cement-Based Plaster

JC/T 799-2016 装饰石膏板

decorative gypsum board