Q72 混凝土构配件 标准查询与下载

DB21/T 1868-2010 装配整体式混凝土结构技术规程（暂行）

Assembled monolithic concrete structure technical specification (provisional)

EN 14975:2006+A1:2010 阁楼梯子.要求,标记和测试

This European Standard specifies terms and definitions, product requirements and test methods for the construction and performance of loft ladders.

Loft ladders - Requirements, marking and testing

BS EN 1857:2010 烟囱.组件.混凝土烟道衬里

This European Standard specifies the material, dimensional and performance requirements, including methods of test, for precast concrete flue liners and fittings with or without insulation for the construction of multi-wall chimneys. This document does not cover:  high positive pressure (H) designated products;  products designated wet (W) in conjunction with corrosion class 3. This document also applies to storey-height and flue liners reinforced only for handling.

Chimneys - Components - Concrete flue liners

DB23/T 1389-2010 钻孔压灌超流态混凝土桩基础技术规程

Technical specification for bored pressure grouting superfluid concrete pile foundation

DIN EN 13693:2009 预制混凝土产品.专用屋面构件,德文版本EN 13693:2004+A1:2009

This document identifies the requirements, the basic performance criteria and the evaluation of conformity for special precast roof elements made of reinforced or prestressed normal weight concrete, used for the constructionof buildings, with or without separating function with respect to fire resistance. NOTE The title of special roof elements refers to thin-walled structural elements with deformable transverse profile, suchas folded plates, or shell elements, the intended use being specific for roofings with their typical loads. This type of elements combines the overall flexural behaviour along the main span with a complex distribution of in-plane forces and local moments. Other types of elements can be used in roofing, such as ribbed units, floor slabs, .... For these elements reference shall be made to their respective product standards. This document identifies also the requirements, the basic performance criteria and the evaluation of conformity of complementary elements made of reinforced or prestressed normal weight concrete, possibly used in combination with the main roof elements, such as load bearing shuttering plates and shells, for which reference shall be made to Annex F. This document covers terminology, performance criteria, tolerances, relevant physical properties, test methods, and aspects of transport and erection. This document does not deal with seismic behaviour. This document does not cover load bearing capacity determined by testing.

Precast concrete products - Special roof elements (includes Amendment A1:2009); English version of DIN EN 13693:2009-10

EN 13693:2004+A1:2009 预制混凝土制品.异形屋顶要素

This document identifies the requirements, the basic performance criteria and the evaluation of conformity for special precast roof elements made of reinforced or prestressed normal weight concrete, used for the construction of buildings, with or without separating function with respect to fire resistance. NOTE The title of special roof elements refers to thin-walled structural elements with deformable transverse profile, such as folded plates, or shell elements, the intended use being specific for roofings with their typical loads. This type of elements combines the overall flexural behaviour along the main span with a complex distribution of in-plane forces and local moments. Other types of elements can be used in roofing, such as ribbed units, floor slabs, etc. For these elements reference shall be made to their respective product standards. This document identifies also the requirements, the basic performance criteria and the evaluation of conformity of complementary elements made of reinforced or prestressed normal weight concrete, possibly used in combination with the main roof elements, such as load bearing shuttering plates and shells, for which reference shall be made to Annex F. This document covers terminology, performance criteria, tolerances, relevant physical properties, test methods, and aspects of transport and erection. This document does not deal with seismic behaviour. This document does not cover load bearing capacity determined by testing.

Precast concrete products - Special roof elements

ISO 8336:2009 纤维水泥平板.产品规范和试验方法

Fibre-cement flat sheets - Product specification and test methods

ASTM C1686-09(2017) 增强热压加气混凝土(AAC)结构安装和试验的标准实施规程

5.1 This practice is intended to regulate the installation of reinforced AAC units and to provide test methods for determining their transverse load-displacement characteristics and load-carrying capacities. 1.1 This practice covers the installation and testing of solid, reinforced units made from autoclaved aerated concrete (AAC), a cementitious product addressed by Specification C1693. The units are large-sized, factory-reinforced, solid rectangular prisms, laid using thin-bed mortar. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units

ASTM C1694-09(2017) 增强热压加气混凝土(AAC)构件的标准规格

1.1 This specification covers reinforced solid elements manufactured from autoclaved aerated concrete (AAC), a cementitious product addressed by Specification C1693. The specification addresses dimensional tolerances, maximum limits for drying shrinkage, requirements for steel reinforcement, and shipping and handling. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements

ASTM C1694-09 增强热压加气混凝土(AAC)构件的标准规范

1.1 This specification covers reinforced solid elements manufactured from autoclaved aerated concrete (AAC), a cementitious product addressed by Specification . The specification addresses dimensional tolerances, maximum limits for drying shrinkage, requirements for steel reinforcement, and shipping and handling. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements

ASTM C1692-09 热压加气混凝土(AAC)砌块的制作和试验标准规程

This practice applies to the materials and methods used in the construction of AAC masonry. It directly references the AAC materials standards under the jurisdiction of ASTM Committee C27 and the workmanship requirements of TMS 602-08 / ACI 530.1-08 / ASCE 6-08 and supplements those workmanship requirements with additional requirements particular to AAC masonry. 1.1 This practice applies to construction and testing of masonry made of AAC units. It includes or references terminology, material specifications, and methods of test. It references specifications and test methods. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry

ASTM C1686-09 增强热压加气混凝土(AAC)构件的安装和试验标准规程

This practice is intended to regulate the installation of reinforced AAC units and to provide test methods for determining their transverse load-displacement characteristics and load-carrying capacities.1.1 This practice covers the installation and testing of solid, reinforced units made from autoclaved aerated concrete (AAC), a cementitious product addressed by Specification . The units are large-sized, factory-reinforced, solid rectangular prisms, laid using thin-bed mortar. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units

ASTM C1693-09 热压加气混凝土(AAC)的标准规范

1.1 This specification covers autoclaved aerated concrete (AAC), a cementitious product based on calcium silicate hydrates in which low density is attained by the inclusion of an agent resulting in macroscopic voids, and in which curing is carried out using high-pressure steam. 1.2 The raw materials used in the production of autoclaved aerated concrete are portland cement or blended cements, quartz sand, water, lime, gypsum or anhydrite, and an agent resulting in macroscopic voids. The quartz sand used as a raw material may be replaced by a siliceous fine aggregate other than sand, and usually is ground to a fine powder before use. Fly ash may be used as a sand replacement. The batched raw materials are mixed thoroughly together to form a slurry. The slurry is cast into steel molds. Due to the chemical reactions that take place within the slurry, the volume expands. After setting, and before hardening, the mass is machine cut into units of various sizes. The units then are steam-cured under pressure in autoclaves where the material is transformed into a hard calcium silicate. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Section 6, 7, and 8.

Standard Specification for Autoclaved Aerated Concrete (AAC)

DIN EN 15287-1:2008 烟囱.烟囱的设计、安装和试运行.第1部分:非密封房间加热设备用烟囱

Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances; German version EN 15287-1:2007

NF P19-201-1-2:2008 建筑工程.地板用混凝土中预制空心板.第1-2部分:材料选择用一般标准

Building works - Precast hollow core slabs in concrete for floors - Part 1-2 : general criteria for selection of materials.

NF P19-201-2:2008 建筑工程.地板用混凝土中预制空心板.第2部分:特殊管理模型条款的合同单

Building works - Precast hollow core slabs in concrete for floors - Part 2 : contract bill of special admnistrative model clauses.

NF P19-201-1-1:2008 建筑工程.地板用混凝土中预制空心板.第1-1部分:技术模型条款的合同单

Building works - Precast hollow core slabs in concrete for floors - Part 1-1 : contract bill of technical model clauses.

DIN EN 13791:2008 建筑物和预浇制混凝土构件的现场耐压强度评定

This European Standard: -- gives methods and procedures for the assessment of the in-situ compressive strength of concrete in structures and precast concrete components; -- provides principles and guidance for establishing the relationships between test results from indirect test methods and the in-situ core strength; -- provides guidance for the assessment of the in-situ concrete compressive strength in structures or precast concrete components by indirect or combined methods. This European Standard does not include the following cases: -- where indirect methods are used without correlation to core strength; -- assessment based on cores less than 50 mm in diameter; -- assessment based on less than 3 cores; -- use of microcores. NOTE In these cases provisions valid in place of use apply. N3) National mmarki See National Annex; UA,2; NA'4.3, UA.4.4 and NA.4:5 regarding national provisions dealing with the fourth and sixth items in the above list, This European Standard is not for the assessment of conformity of concrete compressive strength in accordance with EN 206-1 or EN 13369 except as indicated in EN 206-1:2000.5.5.1.2 or 8.4.

Assessment of in-situ compressive strength in structures and precast concrete components; English version of DIN EN 13791:2008-05

JIS A 5416 ERRATUM 2:2008 勘误表

ERRATUM

JIS A 6501 AMD 1:2008 建筑构件(混凝土墙板)(修改件1)

Building components (Concrete panel for wall) (Amendment 1)