T43 载货汽车 标准查询与下载

ISO 10658:1996 工业车辆在由动力装置侧移载荷条件下堆垛作业 附加稳定性试验

Describes an additional test for the stability of a laden truck fitted with a laterally fixed load-handling device, which can displace the centre of gravity in a substantial amount from the centre plane of the truck.

Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices - Additional stability test

ARMY MIL-T-11663 K NOTICE 1-1996 商用4X2型载量21.000至32000磅的.后悬式集装箱吊装.物料装卸卡车

This notice should be filed in front of MIL-T-l1663K, dated 14 December 1987.

TRUCK, MATERIAL HANDLING, CONTAINER HOISTING: REAR HOIST, 21,000 TO 32,000 POUNDS GVW, 4X2, COMMERCIAL

ARMY MIL-T-62735 NOTICE 1-1996 商用卡车及拖车的一般规定

This notice should be fled in fiont of MIL-T-62735, dated 20 March 1992.

TRUCKS AND TRUCK TRACTORS: MODIFIED COMMERCIAL, GENERAL SPECIFICATION FOR

ARMY A-A-52511-1995 (公制普通用途和机械)带4转环脚轮的长方形小卡车

This CID covers requirements for general purpose and machinery dolly trucks with rectangular frames and four swivel casters. General purpose dolly trucks are intended for moving loads, not exceeding 454 kilograms(kg)(1000 pounds), over short distances on paved surfaces. Machinery dolly trucks are intended for use singularily or in pairs for moving machinery and other bulky loads, not exceeding 1089 kg(2400 pounds) per truck, over short distances on paved surfaces.

TRUCKS, DOLLY, RECTANGULAR, WITH 4 SWIVEL CASTERS (GENERAL PURPOSE AND MACHINERY) (METRIC)

ISO 3894:1995 商用车辆 车轮/轮辋 试验方法

This International Standard specifies three laboratory methods for testing certain essential strength charac- teristics of disc wheels, spoke wheels and demount- able rims intended for road use on commercial vehicles, buses, trailers and multipurpose passenger vehicles, as defined in ISO 3833. The test methods are a) disc wheel dynamic cornering fatigue tests; b) disc wheels and wheels with demountable rims — dynamic radial fatigue tests; and c) wheels with demountable rims — dynamic cor- nering fatigue test.

Commercial vehicles - Wheels/rims - Test methods

AS 2359.7:1995 机动工业卡车.术语

Sets out classifications and definitions of different powered industrial trucks; terms and definitions of main components are included. This Standard is identical with and reproduced from ISO 5053:1987.

Powered industrial trucks - Terminology

ARMY A-A-52544-1995 25000 LBS.容量卡车拖拉机33英寸的普及的第五轮装配

This CID covers requirements for a fifth wheel assembly used in coupling a truck-tractor to a trailer.

FIFTH WHEEL ASSEMBLY -33 INCH UNIVERSAL, TRUCK-TRACTOR, 25000 LBS. CAPACITY

ARMY A-A-52543-1995 45000 LBS.容量卡车拖拉机36英寸的普及的第五轮装配

This CID covers requirements for a fifth wheel assembly used in coupling a truck-tractor to a trailer.

FIFTH WHEEL ASSEMBLY -36 INCH UNIVERSAL, TRUCK-TRACTOR, 45000 LBS. CAPACITY

GSA FED-STD-307 Y-1995 1,800 到 7,000 KG 二轮和四轮驱动4X2和 4X4轻型商业货车(4,000 TO 15,000 LBS) GVW [代替: GSA FED-STD-00307 C]

TRUCKS, LIGHT, COMMERCIAL, TWO AND FOUR WHEEL DRIVEN, 4X2& 4X4, 1,800 TO 7,000 KG (4,000 TO 15,000 LBS) GVW [Use In Lieu Of: GSA FED-STD-00307 C]

TRUCKS, LIGHT, COMMERCIAL, TWO AND FOUR WHEEL DRIVEN, 4X2& 4X4, 1,800 TO 7,000 KG (4,000 TO 15,000 LBS) GVW [Use In Lieu Of: GSA FED-STD-00307 C]

GSA FED-STD-807 B-1995 货车和牵引车:重型商用 6X4和6X6,18,000 到 30,000 KG(40,000 到 66,000 LBS) GVW

TRUCKS AND TRUCK TRACTORS: HEAVY COMMERCIAL 6X4& 6X6, 18,000 TO 30,000 KG (40,000 TO 66,000 LBS) GVW

TRUCKS AND TRUCK TRACTORS: HEAVY COMMERCIAL 6X4& 6X6, 18,000 TO 30,000 KG (40,000 TO 66,000 LBS) GVW

ARMY MIL-T-740 G NOTICE 2-1995 M39.M39A1.M39A2和M809系列的军事设计6X6型5吨卡车[代替:ARMY MIL-T-00740 E]

This notice should be filed in front of MIL-T-740G, dated 27 May 1983.

TRUCKS: 5 TON, 6X6, MILITARY DESIGN, M39, M39A1, M39A2 AND M809 SERIES [Use In Lieu Of: ARMY MIL-T-00740 E]

SAE J1301-1994 卡车变形分类

he scope and purpose of this SAE Recommended Practice is to provide a classification system for deformation sustained by trucks involved in collisions on the highway. Application of the document is limited to medium trucks, heavy trucks, and articulated combinations. The TDC classifies collision contact deformation, as opposed to induced deformation, so that the deformation is segregated into rather narrow limits or categories. Studies of collision deformation can then be performed on one or many data banks with assurance that data under study are of essentially the same type. Many of the features of the SAE J224 MAR80 have been retained in this document, although the characters within specific columns vary. each document must therefore be applied to the appropriate vehicle type. It is also important to note that the Truck Deformation classification (TDC) does not identify specific vehicle configurations and body types. The TDC is an expression, useful to persons engaged in vehicle safety, to appropriately describe a collision-damaged truck with consistences in oral and written communications. The TDC is also a research tool; however, it has not been designed for use in impact energy computation. The research community is cautioned not to attempt direct conversion calculations from the TDC to energy equivalents required to duplicate the damage. The system consists of seven alphanumeric characters arranged in a specific order to form a descriptive composite of the vehicle damage (see figure 1). The characters describe the principal force direction, location, specific area, type, and extent of damage. The individual character positions are referenced by column number for identification of each classification is provided in subsequent sections.

Truck Deformation Classification

DIN ISO 5053:1994 机动工业货车.术语

Powered industrial trucks - Terminology; identical with ISO 5053:1987

QC/T 76.11-1993 矿用自卸汽车试验方法 使用可靠性试验

本标准规定了矿用自卸汽车的使用可靠性试验方法。 　　本标准适用于各种以柴油机为动力的矿用自卸汽车的定型和质量考核时的使用可靠性试验。

Reliability test of mine dump truck test method

QC/T 76.10-1993 矿用自卸汽车试验方法 冷却系冷却能力试验

本标准规定了矿用自卸汽车冷却系冷却能力的道路试验方法。 　　本标准适用于装用强制循环液冷式发动机(和液力机械变速器)的矿用自卸汽车。

Test method for mining dump truck Cooling capacity test of cooling system

QC/T 76.9-1993 矿用自卸汽车试验方法 空气调节系统性能试验

本标准规定了矿用自卸汽车空气调节系统的性能试验方法。 　　本标准适用于装有空调、采暖装置和(或)通风装置的矿用自卸汽车。

Mining dump truck test method air conditioning system performance test

QC/T 76.8-1993 矿用自卸汽车试验方法 行驶平顺性试验

本标准规定了矿用自卸汽车平顺性随即输入行驶试验方法，用于测定被试车辆在随机不平的路面上行驶时振动对驾驶员的影响和评价车辆的平顺性。 　　本标准适用于各种矿用自卸汽车。

Mining dump truck test method ride comfort test

QC/T 76.7-1993 矿用自卸汽车试验方法 应急转向能力试验

本标准规定了矿用自卸汽车应急转向能力的试验方法。 　　本标准适用于装有应急转向装置的矿用自卸汽车。

Mining dump truck test method emergency steering ability test

QC/T 76.6-1993 矿用自卸汽车试验方法 燃料消耗量试验

本标准规定了矿用自卸汽车燃料消耗量的试验方法。 　　本标准适用于以柴油机为动力的各种矿用自卸汽车。

Test method of mine dump truck fuel consumption test

QC/T 76.5-1993 矿用自卸汽车试验方法 恒功试验

本标准规定了矿用自卸汽车的恒功试验方法。 　　本标准适用于电传动矿用自卸汽车。

Mining dump truck test method constant power test