T43 载货汽车 标准查询与下载

NY/T 1356-2007 三轮汽车和低速货车质量评价技术规范

本标准规定了三轮汽车和低速货车的质量要求、检测方法和检验规则。 本标准适用于三轮汽车和低速货车的质量评定。

Technical Specincationsof Quality Evaluation for Tri-wheel Vehicle and Low-speed Vehicle

BS EN 12642:2006 道路车辆上货物安全性.商用车辆的车体结构.最低要求

This European Standard applies to body structures on commercial vehicles and on trailers with a maximum total weight of more than 3 500 kg. This European Standard sets out basic minimum requirements for standard vehicle bodies (side walls, front and rear walls) and for reinforced vehicle bodies and specifies appropriate tests. This European Standard does not apply to swap bodies, nor to box type vans, i.e. vehicles where the driver cabin and the cargo space form one unit.

Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements

NF H90-212:2007 道路车辆货物安全.商用车辆的车体结构.最低要求

Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements.

DIN EN 12642:2007 道路车辆上货物的安全.商用车辆的车体结构.最低要求

This European Standard applies to body structures on commercial vehicles and on trailers with a maximum total weight of more than 3 500 kg. This European Standard sets out basic minimum requirements for standard vehicle bodies (side walls, front and rear walls) and for reinforced vehicle bodies and specifies appropriate tests. This European Standard does not apply to swap bodies, nor to box type vans, i.e. vehicles where the driver cabin and the cargo space form one unit.

Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements; German version EN 12642:2006

ISO 21308-2:2006 道路车辆.底盘和车身制造商(BEP)之间的产品数据交换.第2部分:尺寸车体交换参数

This part of ISO 21308 provides a set of codes for the exchange of dimensional data between truck chassis manufacturers and bodywork manufacturers. It applies to commercial vehicles as defined in ISO 3833, having a maximum gross vehicle mass above 3 500 kg. The process of exchanging the above information can involve: - chassis manufacturer; - chassis importer; - chassis dealer; - one or more bodywork manufacturers; - bodywork component suppliers, e.g. manufacturers of demountable bodies, cranes and loading equipment, tipping equipment.

Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 2: Dimensional bodywork exchange parameters

SANS 10187-4:2006 车辆的货物固定装置．第4部分：木材和甘蔗

Covers the safe securement and loading of timber and sugar cane loads on vehicles.

Load securement on vehicles Part 4: Timber and sugar cane

SANS 10187-5:2006 车辆的货物固定装置．第5部分：散装货

Covers the safe securement and loading on vehicles of loose bulk loads.

Load securement on vehicles Part 5: Loose bulk loads

SANS 10187-9:2006 车辆的货物固定装置．第9部分：玻璃板

Covers the safe securement and loading of glass sheeting on vehicles.

Load securement on vehicles Part 9: Glass sheeting

SANS 10187-3:2006 车辆的货物固定装置．第3部分：金属负荷

Covers the safe securement and loading of metal loads on vehicles.

Load securement on vehicles Part 3: Metal loads

SANS 10187-6:2006 车辆的货物固定装置．第6部分：容器

Covers the safe securement and loading of containers on vehicles.

Load securement on vehicles Part 6: Containers

SANS 10187-2:2006 车辆的货物固定装置．第2部分：普通货物

Covers the safe securement and loading of general freight on vehicles.

Load securement on vehicles Part 2: General freight

SANS 10187-7:2006 车辆的货物固定装置．第7部分：不规则货物

Covers the safe securement and loading on vehicles of abnormal loads.

Load securement on vehicles Part 7: Abnormal loads

SANS 10187-8:2006 车辆的货物固定装置．第8部分：危险货物

Covers the safe securement and loading of dangerous goods on vehicles.

Load securement on vehicles Part 8: Dangerous goods

BS ISO 24134:2006 工业用卡车.卡车自动功能附加要求

ISO 24134:2006 specifies the safety requirements for controls and control systems for the following automated functions of industrial trucks: steering (excluding direct mechanical guidance); travel; lifting and lowering operations; load manipulations, e.g. rotation, reach, slewing, tilting, clamping; combination and/or sequence of these movements. ISO 24134:2006 is intended for use in conjunction with one or more of the applicable parts of ISO 3691. It is not applicable to, and does not include, requirements for the following: safety equipment (e.g. devices for height limitation, speed limitation) used to override driver control; operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields); operation in environments subject to special rules (e.g. potentially explosive atmospheres); electromagnetic compatibility; transportation of passengers; handling of loads, the nature of which could lead to dangerous situations (e.g. molten metals, acids/bases, radiating materials). Limitations in the scopes of the applicable parts of ISO 3691 also apply to ISO 24134:2006.

Industrial trucks - Additional requirements for automated functions on trucks

ISO 24134:2006 工业卡车.卡车上自动化功能附加要求

This International Standard specifies the safety requirements for controls and control systems for the following automated functions of industrial trucks: - steering (excluding direct mechanical guidance); - travel; - lifting and lowering operations; - load manipulations, e.g. rotation, reach, slewing, tilting, clamping; - combination and/or sequence of the above movements. NOTE The control system is generally part of the truck but can include components external to the truck, e.g. the means of guidance for automated steering. This International Standard is intended for use in conjunction with one or more of the applicable parts of ISO 3691. This International Standard is not applicable to, and does not include, requirements for the following: - safety equipment (e.g. devices for height limitation, speed limitation) used to override operator control; - operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields); - operation in environments subject to special rules (e.g. potentially explosive atmospheres); - electromagnetic compatibility; - transportation of passengers; - handling of loads, the nature of which could lead to dangerous situations (e.g. molten metals, acids/bases, radiating materials). Limitations in the scopes of the applicable parts of ISO 3691 also apply to this International Standard.

Industrial trucks - Additional requirements for automated functions on trucks

ASTM E2518-06 IV型(M923型5吨货运卡车/M1083型5吨中轻型装甲车(MTV)/M1082型5吨拖车)载货平板车车盖的标准规范

1.1 This specification covers the general requirements for the Type IV Cargo Bed Cover (CBC). The Type IV Cargo Bed Cover is a removable general purpose rigid enclosure for the cargo bed of the M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1095, 5 Ton MTV Trailer. The CBC provides environmental protection and security for mission equipment and items of general transport.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parenthesis are for information only.1.3 The following safety hazards caveat pertains only to the test required portion, Section 4, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1082, 5 Ton MTV Trailer)

NF H90-211-1:2005 可换式车箱和商用车辆.防水油布.第1部分:最低要求

Swap bodies and commercial vehicles - Tarpaulins - Part 1 : minimum requirements.

DIN 75410-2:2005 道路车辆中货物的固定.第2部分:乘用车、客货两用车和多用途乘用车中货物的固定

This Standard specifies minimum requirements and test methods for cargo securing devices and for front and rear seats in passenger cars, station wagons and multipurpose vehicles in order to protect passengers against unsecured cargo.#,,#

Securing of cargo in road vehicles - Part 2: Securing of cargo in passenger cars, station wagons and multi-purpose passenger cars

SN/T 1688.3-2005 进出口机动车辆检验规程 第3部分:农用运输车

本部分规定了农用运输车的要求、检验及判定。 本部分适用于四轮农用运输车和三轮农用运输车。

Rules for the inspection of power-driven vehicles for import and export--Part 3: Agricultural vehicles

DLA KKK-T-683 E (1)-2005 双轮手动卡车

This specification covers the requirements for five types of two— wheeled hand trucks.

TRUCKS, HAND, TWO-WHEELED