T43 载货汽车 标准查询与下载

ISO 3894:2005 道路车辆.商用车辆的车轮/轮辋.试验方法

This International Standard specifies three laboratory methods for testing certain essential strength characteristics of disc wheels, spoke wheels and demountable rims intended for road use on commercial vehicles, buses, trailers and multipurpose passenger vehicles, as defined in ISO 3833. The test methods are a) disc wheel dynamic cornering fatigue test; b) disc wheels and wheels with demountable rims — dynamic radial fatigue test; and c) wheels with demountable rims — dynamic cornering fatigue test.

Road vehicles - Wheels/rims for commercial vehicles - Test methods

BS EN ISO 21281:2005 自行式乘坐控制工业货车的踏板结构和布局.踏板结构和布局的原则

This International Standard specifies the layout of pedals of self-propelled sit-down rider-controlled industrial trucks, as defined in Parts 1, 2, 3 and 6 of ISO 3691.

Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals

DB31/T 331-2004 营运厢式货运车辆技术要求

Technical cdriteria for business conveyance van

ASTM E2462-05 I型载货平板车覆盖层(CBC) HMMWV的标准性能规范

1.1 Scope This specification covers the performance requirements for the Type I Cargo Bed Cover (CBC). The Type I Cargo Bed Cover is a removable general purpose rigid enclosure for the cargo bed of the M1037, M1042, M1097, and M1113 High-Mobility Multipurpose Wheeled Vehicle (HMMWV). The Type I CBC provides environmental protection and security for mission equipment and items of general transport.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parenthesis are for information only.1.3 The following safety hazards caveat pertains only to the test required portion, Section , of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I

QC/T 718-2004 混凝土泵车

本标准规定了混凝土泵车术语和定义、技术要求、试验方法、检验规则、产品标牌、使用说明书和随车文件、包装、运输、贮存。 　　本标准适用于采用已定型的汽车二类底盘改装的臂架式混凝土泵车。车载式混凝土泵车参照执行。

Truck mounted concrete pump

DIN 75410-3:2004 道路车辆上货物的固定.第3部分:旅行货车中货物的固定

Securing of cargo on road vehicles - Part 3: Securing of cargo in truck station wagons (closed body)

ARMY A-A-52511 VALID NOTICE 1-2004 (公制普通用途和机械)带4转环脚轮的长方形小卡车

A-A-52511, dated 14 September 1995, has been reviewed and determined to be valid for use in acquisition

COMMERCIAL ITEM DESCRIPTIONS (CIDS) TRUCKS, DOLLY, RECTANGULAR, WITH 4 SWIVEL CASTERS (GENERAL PURPOSE AND MACHINERY) (METRIC)

ARMY A-A-52544 VALID NOTICE 1-2004 25000 LBS.容量卡车拖拉机33英寸的普及的第五轮装配

A-A-52544, dated 12 December 1995, has been reviewed and determined to be valid for use in acquisition

FIFTH WHEEL ASSEMBLY -33 INCH UNIVERSAL, TRUCK-TRACTOR, 25000 LBS. CAPACITY

ARMY A-A-52543 VALID NOTICE 1-2004 45000 LBS.容量卡车拖拉机36英寸的普及的第五轮装配

A-A-52543, dated 12 December 1995, has been reviewed and determined to be valid for use in acquisition

FIFTH WHEEL ASSEMBLY -36 INCH UNIVERSAL, TRUCK-TRACTOR, 45000 LBS. CAPACITY

QC/T 459-2004 随车起重运输车

本标准规定了随车起重运输车的定义、要求、试验方法、检验规则、标志、使用说明书、随车文件、运输、贮存。 　　本标准适用于以定型载货汽车或定型汽车底盘改装的随车起重运输车。

Truck with loading crane

ISO 14794:2003 重型商用车辆和客车.转向制动.开环试验方法

This International Standard specifies open-loop test methods for determining the effect of braking on the course-holding and directional behaviour of heavy vehicles or heavy vehicle combinations when braking is accomplished using — the service-brake system, or — the retarder or engine brake only. This International Standard is applicable to heavy vehicles — i.e. commercial vehicles, commercial vehicle combinations, buses and articulated buses as defined in ISO 3833 — covered by Categories M3, N2, N3, O3 and O4 of UNECE (United Nations Economic Commission for Europe) and EC vehicle regulations. These categories pertain to trucks and trailers with a maximum mass above 3,5t and to buses and articulated buses with a maximum mass above 5t.

Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods

DIN 75410-1:2003 货车安全性.第1部分:最大载重量为3.5吨的商用运货车紧固点.最低要求

This standard provides minimum requirements for lashing points on commercial vehicles and platform trailers up to a total mass 3,5 t, which are used for goods transport.

Securing of cargo road vehicles - Part 1: Lashing points on commercial vehicles for goods transportation up to a total mass of 3,5 t; Minimum requirements

BS AU 268:2003 小客车和轻型厢式货车.商用牵引杆组件.规范

This British Standard specifies requirements for the dimensions, construction, and strength of towing pole assemblies to be used commercially for towing passenger cars and light vans. This standard is applicable to towing pole assemblies for use by towing vehicles of up to 3 500 kg gross mass to tow vehicles of up to 3 500 kg gross mass. NOTE The towing pole assemblies specified in this British Standard are intended for towing broken-down vehicles.

Passenger cars and light vans - Commercial towing pole assemblies - Specification

SAE J2418-2003 乘员约束系统评价正面碰撞组件级的重型卡车

This SAE Recommended Practice describes the test procedures for conducting frontal impact restraint component tests for heavy truck applications. Its purpose is to establish recommended test procedures that will standardize restraint system testing for heavy trucks. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.

Occupant Restraint System EvaluationFrontal Impact Component-Level Heavy Trucks

SAE J2419-2003 乘员约束系统评价正面撞击系统.重型卡车

This SAE Recommended Practice describes the test procedures for conducting frontal impact restraint system tests for heavy truck applications. Its purpose is to establish recommended test procedures that will standardize restraint system testing for heavy trucks. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.

Occupant Restraint System EvaluationFrontal Impact System-Level Heavy Trucks

QC/T 453-2002 厢式运输车

本标准规定了厢式运输车的要求、试验方法、检验规则及标志、运输、贮存。 　　本标准适用于在已定型的汽车底盘上改装的厢式运输车和厢式运输半挂车。

van

QC/T 679-2002 车辆运输车

本标准规定了车辆运输车的要求、试验方法、检验规则、标志、使用说明书及随车文件、运输、贮存等。 　　本标准适用于车辆运输半挂车、车辆运输全国车及在定型汽车底盘上改装的车辆运输车。

vehicle transporter

NF H96-313:2002 工业货车的安全.测量振动用试验方法

Safety of industrial trucks - Test methods for measuring vibration.

SAE J2406-2002 CNG动力驱动的中型和重型卡车的推荐实施规程

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of CNG powered medium and heavy-duty trucks.

Recommended Practices for CNG Powered Medium and Heavy-Duty Trucks

KS R ISO 9367-1:2001 滚装船上道路车辆捆绑和固定装置.通用要求.第1部分:商用车辆和车辆列车(半挂车除外)

이 규격은 로로선(Ro/Ro Ship)에 도로 차량을 싣는데 있어서 능률적이고 견고한 고박

Lashing and securing arrangements on road vehiclesfor sea transportation on Ro/Ro ships－Part 1：Commercial vehicles and combinations of vehicles(semi-trailers excluded)