V16 热加工工艺 标准查询与下载
共找到 309 条与 热加工工艺 相关的标准，共 21 页
This specification covers a magnesium alloy in the form of rolled plate. This product has been used typically for parts requiring a combination of light weight, high yield strength up to 480 °F (250 °C), relatively high corrosion resistance, and good flammability resistance for magnesium alloys,but usage is not limited to such applications.
Magnesium Alloy, Plate, 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5), Precipitation Heat Treated
- ICS
- 49.025.99
- CCS
- V16
- 发布
- 2013-08-12
- 实施
This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification presents requirements for the heat treatment of parts and components fabricated from wrought (plate, sheet, strip, bar, rod, wire extrusions and tube and forgings) copper alloys, numbers C17000, C17200, C17300, C17500, and C17510. This specification also covers ""bright hardening"".
Heat Treatment of Wrought Copper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000, C17200, C17300, C17500, and C17510)
- ICS
- 49.025.15
- CCS
- V16
- 发布
- 2013-04-19
- 实施
Magnesium Alloy, Plate 4.0Y 2.25Nd 0.5Zr (WE43C - T5) Precipitation Heat Treated
- ICS
- 49.025.99
- CCS
- V16
- 发布
- 2013-03-25
- 实施
This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts made of cast nickel or cobalt alloys and of fabricated assemblies in which cast nickel or cobalt alloys are the primary structural components. It is not intended to provide requirements for heat treating operations that are a responsibility of the casting supplier in meeting the requirements of the casting commodity specification.
Heat Treatment Cast Nickel Alloy and Cobalt Alloy Parts
- ICS
- 49.025.15
- CCS
- V16
- 发布
- 2013-02-11
- 实施
This specification establishes the requirements for computer monitored shot peening of parts surfaces by impingement of media, including metallic, glass, or ceramic shot. Computer monitored peening is intended to provide a method of process observation, traceability, and response for all process in put settings, in real time, during the entire peening process to ensure with objective evidence, the desired process outputs. Shot peening in accordance with AMS 2432 meets or exceeds the requirements of AMS 2430.
Shot Peening, Computer Monitored
- ICS
- 49.040
- CCS
- V16
- 发布
- 2013-02-07
- 实施
Welding for aerospace applications. Resistance spot and seam welding
- ICS
- 25.160.10
- CCS
- V16
- 发布
- 2013-01-31
- 实施
- 2013-01-31
本指导性技术文件规定了钛及钛合金激光焊接的人员、环境、材料、设备与工装、焊接设备的工艺性鉴定、工艺参数选择与确定、工艺参数的重新确定、焊缝等级、文件的管理、工艺控制、质量控制以及安全要求等。本指导性技术文件适用于厚度不大于6mm的TA0、TA1、TA2、TA3、TA5、TA15、TC1、TC2、TC4等钛合金零件对接、搭接接头激光焊接。其他钛合金的对接、搭接接头激光焊接可参照本指导性技术文件使用。
Process for laser welding of titanium and titanium alloys
- ICS
- CCS
- V16
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本指导性技术文件规定了铝合金航空结构激光填丝焊接的人员、环境、材料、设备与工装、焊接设备的工艺性鉴定、工艺参数选择与确定、工艺参数的重新确定、接头等级、文件的管理、工艺控制、质量控制以及安全要求等。本指导性技术文件适用于壁厚不大于4mm的5000系和6000系铝合金对接、搭接接头激光填丝焊接。其他系列铝合金的对接、搭接接头激光填丝焊接也可参照本指导性技术文件。
Process for laser welding with filling wire of aluminum alloys
- ICS
- CCS
- V16
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本指导性技术文件规定了铝合金激光焊焊前化学清洗(碱洗+酸洗)工艺的人员、环境、材料、设备、化学清洗溶液、工艺控制、质量控制以及安全与环保等方面的要求。本指导性技术文件适用于铝合金激光焊接件的焊前化学清洗。激光填丝焊、激光电弧复合焊可参考使用。
Chemical cleaning process for aluminum alloys before laser welding
- ICS
- CCS
- V16
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本规范规定了铝合金铸件焊补用焊丝的要求、质量保证规定、交货准备和说明事项等。本规范适用于航空铝合金铸件焊补用焊丝。
Specification for casting aluminium alloy wire for fill welding
- ICS
- CCS
- V16
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本指导性技术文件规定了铝合金航空结构激光焊接的人员、环境、材料、设备与工装、焊接设备的工艺性鉴定、工艺参数选择与确定、工艺参数的重新确定、接头等级、文件的管理、工艺控制、质量控制以及安全要求等。本指导性技术文件适用于壁厚不大于4mm的5000系和6000系铝合金对接、搭接接头激光焊接。其他系列铝合金的对接、搭接接头激光焊接也可参照本指导性技术文件。
Process for laser welding of aluminum alloys
- ICS
- CCS
- V16
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本指导性技术文件规定了铝合金航空结构激光熔化极惰性气体保护电弧旁轴复合焊接的人员、环境、材料、设备与工装、焊接设备的工艺性鉴定、工艺参数选择与确定、工艺参数的重新确定、接头等级、文件的管理、工艺控制、质量控制以及安全要求等。本指导性技术文件适用于壁厚不大于4mm的5000系和6000系铝合金对接、搭接接头熔化极惰性气体保护电弧辅助激光的旁轴激光电弧复合焊接。其他系列铝合金的对接、搭接接头激光熔化极惰性气体保护电弧复合焊接也可参照本指导性技术文件。
Process for laser-arc hybrid welding of aluminum alloys
- ICS
- CCS
- V16
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本标准规定了航空发动机用电子束焊接接头工业射线层析成像(以下简称工业CT)检测对检测人员、环境条件、检测设备、对比试件、检测工艺、检测程序、检测记录、结果评定、检测报告等的要求。本标准适用于航空发动机用电子束焊接接头内部缺陷的检测。航空发动机其他焊接接头的工业CT检测可参照本标准执行。
Test method for computed tomographic (CT) examination of welded joints in aero-engine electron-beam welding workpiece
- ICS
- CCS
- V16
- 发布
- 2013-01-04
- 实施
- 2013-05-01
This specification covers the requirements for gold deposited on metal surfaces and the properties of the deposit. This process has been used typically for passive thermal control applications where high reflectance and low absorptance of solar radiation are required, but usage is not limited to such applications.
Plating, Gold For Thermal Control
- ICS
- 49.040
- CCS
- V16
- 发布
- 2012-12-17
- 实施
This specification covers requirements for electrodeposited porous chronium plate.
Plating, Chromium, Porous
- ICS
- 49.040
- CCS
- V16
- 发布
- 2012-07-23
- 实施
This SAE Aerospace Recommended Practice (ARP) describes a method for classifying the frequencies of analysis of solutions used in the processing of metals, such as electroplating, anodizing, and conversion coating and associated processes but usage is not limited to such applications. This document is intended to establish a periodic test plan that may be used by processors to satisfy the requirement of an Aerospace Material Specification (AMS) for a chemical processing solution periodic test plan as a control factor. This document does not fulfill the criteria for a formal statistical process control program.
Periodic Test Plan for Processing Solutions
- ICS
- 49.040
- CCS
- V16
- 发布
- 2012-01-09
- 实施
This specification covers the engineering requirements for producing brazed joints on aluminum and aluminum alloys by torch or furnace brazing. This process has been used typically for joing aluminum and selected aluminum alloys.
Brazing, Aluminum Torch or Furnace
- ICS
- 49.025.20
- CCS
- V16
- 发布
- 2012-01-06
- 实施
本标准规定了铝合金铸件缺陷补焊的-般要求、补焊工艺、补焊质量要求及检验要求等。 本标准适用于航天产品用铝合金铸件缺陷补焊工艺文件编制。
Technological requirements for repair welding for aluminium alloy castings
- ICS
- CCS
- V16
- 发布
- 2011-07-19
- 实施
- 2011-10-01
本标准规定了变形铝及铝合金熔焊（TIG、MIG)的-般要求、焊接过程、焊接缺陷的修整和补焊、焊接检验等工艺要求。 本标准适用于航天产品用厚度不小于0.5mm的变形铝及铝合金的熔焊。
Process specifications for fusion welding of aluminium and aluminium alloys
- ICS
- CCS
- V16
- 发布
- 2011-07-19
- 实施
- 2011-10-01
本标准规定了热喷涂工艺质量控制的人员、设备、材料、环境、涂层(系统)设计原则、工艺过程、涂层检验及不合格涂层的处理等。 本标准适用于等离子喷涂、火焰喷涂及电弧喷涂等热喷涂工艺的质量控制。
Quality controls of thermal spray process
- ICS
- CCS
- V16
- 发布
- 2011-07-19
- 实施
- 2011-10-01
