V18 冷加工工艺 标准查询与下载
共找到 335 条与 冷加工工艺 相关的标准，共 23 页
This standard specifies an anaerobic polymerisable compound which polymerises upon the exclusion of oxygen and activation by a metal surface with a torque strength of 2 Nm and a viscosity of 500 mm2s-1.
Aerospace series Titanium alloy TI-P64003 Cold worked and stress relieved Seamless tube for pressure systems 4 mm Less than or equal to D Less than or equal to 51 mm 690 MPa Less than or equal to Rm Less than or equal to 1 030 MPa Edition P 3
- ICS
- 77.120.50
- CCS
- V18
- 发布
- 2005
- 实施
本标准规定了拉丝型抽芯铆钉铆接的工艺程序、技术要求、工艺参数、工艺方法、所用工具和质量控制等。 本标准适用于金属结构件的拉丝型抽芯铆钉的铆接。
Aircraft assembling technology reveting of break mandrel revets
- ICS
- CCS
- V18
- 发布
- 2004-09-01
- 实施
- 2004-12-01
本标准规定了HB 6298《平锥头铆钉》干涉配合铆接的工艺过程、技术要求、工艺参数、工艺方法、所用工具和检查方法等。 本标准适用于夹层为铝合金，厚度不大于10mm的气密舱、整体油箱等密封结构和疲劳性能要求较高的结构。
Aircraft assembling technology Reveting of interfere fitting for half crown rivets and conhead rivets
- ICS
- CCS
- V18
- 发布
- 2004-09-01
- 实施
- 2004-12-01
Aerospace industry - Blast media - White alumina.
- ICS
- 49.040
- CCS
- V18
- 发布
- 2004-03-01
- 实施
- 2004-03-05
Aerospace industry - Blast media - Aluminium oxide.
- ICS
- 49.040
- CCS
- V18
- 发布
- 2004-03-01
- 实施
- 2004-03-05
Methods for analysis of plating black nickel solutions Part 6:Determination of boric acid content by potentiometric titrimetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
Methods for analysis of plating black nickel solutions Part 5:Determination of ammonium thiocyanate content by potentiometric titrimetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
Methods for analysis of plating black nickel solutions Part 4:Determination of sodium sulfate content by precipitation titrimetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
Methods for analysis of plating black nickel solutions Part 3:Continual determination of nickel sulfate and zinc sulfate content by EDTA compleximetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
Methods for analysis of plating black nickel solutions Part 2:Continual determination of nickel sulfate and zinc sulfate content by magnesium sulfate back titrmetric EDTA volumetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
本部分规定了采用离子选择电极法(氨气敏电极法)测定电镀黑镍溶液中硫酸镍铵[NiSO， (NH4):SO，6H:O]含量的原理试剂仪器分析步骤及分析结果的计算。 本部分适用于电镀黑镍溶液中硫酸镍铵含量的测定。 测量范围:30g/L ~ 70g/L。
Methods for analysis of plating black nickel solutions Part 1:Determination of ammonium nickel sulfate content by ion selective electrode method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
Methods for analysis of acid plating copper solutions part 7:Determination of antimony content by atomic absorption spectrmetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
Methods for analysis of plating lead solutions Part 2:Determination of free fluorboric acid content by potentiometric titrimetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
本部分规定了采用了 EDTA 容量法测定电镀铅溶液中氧化铅含量的原理试剂.分析步骤及分析结 果的计算。 本部分适用于电镀铅溶液中氧化铅含量的测定。 测量范围:115g/L ~ 160g/L。
Methods for analysis of plating lead solutions Part 1:Determination of lead oxide content by EDTA volumetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
本部分规定了采用二乙基二硫代氨基甲酸銀分光光度法测定酸性电鍍鋼溶液中砷含量的原理、試 劑、儀器、分析步骤及分析结果的计算。 本部分适用于酸性电鍍鋼溶液中砷含量的测定。 测量范围:不大于 0.05g/L。
Methods for analysis of acid plating copper solutions part 6:Determination of arsenic content by spectrophotometric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
Methods for analysis of acid plating copper solutions part 5:Determination of nickel sulfate content by atomic absorption spectrometric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
本部分规定了采用原子吸收光谱法测定酸性电镀铜溶液中铁含量的原理试剂仪器、分析步骤及分 析结果的计算。 本部分适用于酸性电镀铜溶液中铁含量的测定。 测量范围:不大于 0.05g/L。
Methods for analysis of acid plating copper solutions part 4:Determination of iron content by atomic absorption spectrometric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
本部分规定了采用电位滴定法测定酸性电鍍鋼溶液中硫酸含量的原理、試劑、儀器、分析步骤和分析 结果的计算。 本部分适用于酸性电镀铜溶液中硫酸含量的测定。 测量范围:40g/L ~ 60g/L。
Methods for analysis of acid plating copper solutions part 3:Determination of sulphuric acid content by potentiometric titrimetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
本部分规定了采用电位滴定法测定酸性电镇铜溶液中硫酸铜(CuSO，'5H:O)含量的原理.试剂儀 器、分析步骤及分析结果的计算。 本部分适用于酸性电镀铜溶液中硫酸铜含量的测定。 测量范围:190g/L ~ 260g/L。
Methods for analysis of acid plating copper solutions part 2:Determination of copper sulfate content by potentiometric titrimetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
Methods for analysis of acid plating copper solutions part 1:Determination of copper sulfate content by EDTA volumetric method
- ICS
- CCS
- V18
- 发布
- 2004-02-16
- 实施
- 2004-06-01
