V18 冷加工工艺 标准查询与下载

AECMA PREN 3120-1999 航空航天系列.钛合金TI-P46003非热锻2级锻件溶液或沉积处理a或 直径D小于或等于360mm P 2版

This draft standard is based on European discussions in which the UK took an active part. Your comments on this draft are welcome and will assist in the preparation of the consequent British Standard. If no comments are received to the contrary, then the UK will approve this draft and implement it as a British Standard. Comment is particularly welcome on national legislative or similar deviations that may be necessary.

Aerospace Series Titanium Alloy TI-P64003 Cold Worked and Stress Relieved Seamless Tube for Pressure Systems 4 mm Less Than or Equal to D Less Than or Equal to 51 mm Edition P 3

AECMA PREN 2959-1999 航空航天系列抗热合金NI-PH1302(NiCr20Co13Mo4Ti3Al)扣件加工冷锻和溶液处理棒材3mm小于或等于直径D小于或等于30mm

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Heat Resisting Alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) Solution Treated and Cold Worked Bar for Forged Fasteners 3 mm Less Than or Equal to D Less Than or Equal to 30 mm Edition P2

AECMA PREN 2813-1999 航空和航天系列铝合金AL-P6061-T6冷拉管压力下用0,6mm小于或等于a小于或等于12,5mm

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). it is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Aluminium Alloy AL-P6061-T6 Drawn Tube for Pressure Applications 0,6mm Less Than or Equal to a Less Than or Equal to 12,5mm Edition P 2

DLA A-A-20053 B-1998 新鲜或冷藏的烤面包卷

This Commercial Item Description (CID) covers fresh or frozen baked bread rolls, packed in　commercially acceptable containers, suitable for use by Federal, State, local governments, and　other interested parties.

ROLLS, BREAD, BAKED, FRESH OR FROZEN

SAE AS13341-1998 FSC 3110抗摩擦轴承障碍涂层工艺代替MIL-STD-1334B(1)(于1999年8月2日作废)

This standard specifies the basic requirements for the application of barrier coatings to anti-friction bearings for the purpose of preventing lubricant loss by surface migration and spreading dur

Process for Barrier Coating of Anti-Friction Bearings FSC 3110; Should Be Used Instead of MIL-STD-1334B(1), Which Was Cancelled on 2 August 1999

AECMA PREN 3342-1998 航空航天系列.铝合金AL-P6061-T4 或 T42冷拉或挤压棒和型材a或直径D小于或等于150 mm

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Aluminium Alloy AL-P6061-T4 or T42 Drawn or Extruded Bar and Section a or D Less Than or Equal to 150 mm Edition P2

AECMA PREN 2702-1998 航空和航天系列AL-P6061-T6 or T62冷拉或挤压棒材与型材a或1,2mm小于或等于直径D小于或等于150mm

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-2.

Aerospace Series Aluminium Alloy AL-P6061-T6 or T62 Extruded Bar and Section a or D Less Than or Equal to 150 mm Edition P2

AECMA PREN 4092-1998 航空航天系列.空气熔炼和真空精炼　退火耐热合金 NI-PH3901(NiCr25Mo10)　薄板和带材0,25mm小于或等于a小于或等于3mm

This standard specifies an anaerobic polymerisable compound which polymerises upon the exclusion of oxygen and activation by a metal surface with a torque strength of 5 Nm and a viscosity of 500 mm2s-1.

Aerospace Series Heat Resisting Alloy NI-PH3901 (NiCr25Mo 10) Air Melted and Vacuum Refined Annealed Sheet and Strip 0,25 mm Less Than or Equal to a Less Than or Equal to 3 mm Edition P 1

AECMA PREN 4093-1998 航空航天系列.空气熔炼和真空精炼　退火耐热合金 NI-PH3901(NiCr25Mo10) 薄板和带材 a≥3mm

This standard specifies a method of measuring the resistance to cut-through of an insulated conductor or jacket. This test is limited to cables smaller than code 140 (gauge size 6) and insulations with a thickness of 0,38 mm or less.

Aerospace Series Heat Resisting Alloy NI-PH3901 (NiCr25Mo 10) Air Melted and Vacuum Refined Annealed Sheet, Strip and Plate a Greater Than 3 mm Edition P 1

AECMA PREN 4411-1998 航空航天系列.薄片冷轧钢厚度尺寸0,5mm小于或等于a小于或等于3,0mm.P1版

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258.

Aerospace Series Sheets, Cold Rolled in Steel Thickness 0,5 mm Less Than or Equal to a Less Than or Equal to 3,0 mm Dimensions Edition P 1

AECMA PREN 3974-1998 航空航天系列.NI-PH8001(NiCr20Ti)　耐热合金退火　冷拉的无缝细管0,6小于或等于直径D小于或等于2,0 mm

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-3.

Aerospace Series Heat Resisting Alloy NI-PH8001 (NiCr20Ti) Annealed Seamless Drawn Capillary Tube 0,6 mm Less Than or Equal to D Less Than or Equal to 2,0 mm Edition P 1

DLA A-A-20052 B-1998 新鲜或冷藏的面包

This Commercial Item Description (CID) covers fresh or frozen bread, packed in commercially acceptable containers, suitable for use by Federal, State, and local governments and other interested parties.

BREAD, FRESH OR FROZEN

DLA A-A-20139 A-1998 新鲜或冷藏的松饼

Type(s), sîyle(s), flavor(s), and shape(s) of muffins required. - When analyticai testing is required.

MUFFINS, FRESH OR FROZEN

AECMA PREN 2947-1998 航空航天系列FE-PA3004(X10CrNi18-09)空气锻造不抗热冷锻钢丝D小于或等于2,3 mm .P2版

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5.

Aerospace Series Steel FE-PA3004 (X10CrNi18-09) Air Melted Non Heat Treated Cold Drawn Wire a or D Less than or Equal to 2,3 mm Edition P 2

AECMA PREN 2664-1998 航空航天系列Ni-C99HT 非热处理精密铸件.P2版

This standard specifies for the aerospace application, the mechanical properties for precision castings, not heat treated, in heat resisting nickel base alloy NI-C99HT.

Aerospace Series Heat Resisting Nickel Base Alloy Ni-C99HT Not Heat Treated Precision Castings Edition P 2

SAE AMS-S-13165-1997 金属零件的喷丸加工

This specification has been declared "CANCELLED" by the Aerospace Materials Division, SAE, as of December, 2007, and has been superseded by SAE AMS 2430, Shot Peening. Effective January 1, 2009, the requirements of the latest issue of AMS 2430 shall be fulfilled whenever reference is made to the cancelled SAE AMS-S-13165. Prior to that date, processors may perform shot peening in accordance with SAE AMS-S-13165 or SAE AMS 2430. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by SAE AMS 2430. This specification covers procedure requirements for shot peening of metal parts, to induce residual compressive stresses in specified surfaces, for the purpose of improving resistance to fatigue, stress corrosion cracking, and galling.

Shot Peening of Metal Parts

NF L10-309*NF EN 2334:1997 航空航天系列 硫酸铬中铝和铝合金酸洗

Aerospace series. Chromic-sulphuric acid pickle of aluminium and aluminium alloys.

AECMA PREN 2947-1997 航空航天系列FE-PA3004(X10CrNi18-09)空气锻造不抗热冷锻钢丝D小于或等于2,3 mm .P2版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Steel FE-PA3004 (X10CrNi18-09) Air Melted not Hot Treated Wire for Springs D Less than or Equal to 2,3 mm Edition P 1

NF L10-307:1997 航空航天系列.耐蚀钢的钝化和镍基合金的净化(欧洲标准EN 2516)

Aerospace series. Passivation of corrosion resisting steels and decontamination of nickel base alloys.

NF L10-308*NF EN 3769:1997 航空航天系列.耐蚀钢和耐热合金电解抛光(欧洲标准EN 3769)

Aerospace series. Electrolytic polishing of corrosion resisting steels and heat resisting alloys.