V18 冷加工工艺 标准查询与下载

AECMA PREN 4411-1997 航空航天系列.薄片冷轧钢厚度尺寸0,5mm小于或等于a小于或等于3,0mm.P1版

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5.

Aerospace Series Sheets, Cold Rolled in Steel Thickness 0,5 mm Less Than or Equal to a Less Than or Equal to 3,0 mm Dimensions Edition 1

AECMA PREN 4090-1997 航空航天系列.真空感应熔炼和真空电弧再熔、渗碳变硬的零下处理和回火FE-PL5101(13MoCrNiV4-4-3-1)钢　锻件 De小于或等于30mm 、1315MPa小于或等于Rm小于或等于1650MPa

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5.

Aerospace Series Steel FE-PL5101 (13MoCrNiV4-4-3-1) Vacuum Induction Melted and Vacuum Arc Remelted Carburized, Hardened, Sub-Zero Treated and Tempered Forgings De Less Than or Equal to 30 mm 1 315 MPa Less Than or Equal to Rm Less Than or Equal to 1 650

QJ 2912-1997 不锈钢化学铣切工艺规范

Stainless steel chemical milling process specification

AECMA PREN 4097-1997 航空航天系列.真空熔炼沉淀处理Ni-CD1401(NiCo10W10Cr9Al6Ta3)耐热合金　精密铸件

The text of this standard , whick exists in thress equivalent versions has been drawn up under the responsibility of AECMA and has been circulated to Official Services. Any reservations expressed by Official Services and not resolved in this issue, have been incorporated in the history sheet which has accompanied this prEN to CEN.

Aerospace Series Heat Resisting Alloy NI-CD1401 (NiCo10W10Cr9Al6Ta3) Vacuum Melted Precipitation Treated Precision Castings Edition P 1

AECMA PREN 3989-1997 航空航天系列.FE-PA2801(X60NiMnCr13-5-3)冷处理和消除应力钢　机加工用棒 De小于或等于30mm ,Rm≥850MPa

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). it is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Steel FE-PA2801 (X60NiMnCr13-5-3) Cold Workde and Stress Relieved Bar for Machining De Less Than or Equal to 30 mm Rm Greater Than or Equal to 850 MPa Edition P 1

AECMA PREN 4088-1997 航空航天系列.真空感应熔炼和真空电弧再熔、渗碳变硬的零下处理和回火的FE-PL5101(13MoCrNiV4-4-3-1)钢　机加工用棒De小于或等于30mm,1315MPa小于或等于Rm小于或等于1650MPa

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5.

Aerospace Series Steel FE-PL5101 (13MoCrNiV4-4-3-1) Vacuum Induction Melted and Vacuum Arc Remelted Carburized, Hardened, Sub-Zero Treated and Tempered Bar for Machining De Less Than or Equal to 30 mm 1 315 MPa Less Than or Equal to Rm Less Than or Equal

AECMA PREN 3668-1997 航空航天系列.NI-PH2301(NiCr21Fe18Mo9) 非热处理耐热合金　锻坯a 或 直径D小于或等于250 mm

This standard specifies the characteristics of elbow, 37°in titanium alloy intended for use in aircraft fluid system pipe lines.

Aerospace Series Heat Resisting Alloy NI-PH2301 (NiCr21Fe18Mo9) Non Heat Treated Forging Stock a or D Less Than or Equal to 250 mm Edition P 1

AECMA PREN 3671-1997 航空航天系列.NI-PH3601(NiCr22Mo9Nb)非热处理耐热合金　锻坯a 或 直径D小于或等于250 mm

This Technical Report is a guideline for the mandated body and the manufacturer to establish a programme of qualification tests for a change in design of parts of connectors already qualified.

Aerospace Series Heat Resisting Alloy NI-PH3601 (NiCr22Mo9Nb) Non Heat Treated Forging Stock a or D Less Than or Equal to 250 mm Edition P 1

AECMA PREN 3816-1997 航空航天系列.FE-PA3601(X6CrNiTi18-10) 空气熔炼钢 、软化和冷轧　薄板和带 a小于或等于3 mm,Rm≥800MPa.P1版

This standard is initially published on green paper for the needs of AECMA-Members (Association Européenne des Constructeurs de Matériel Aérospatial). It has been technically approved by the experts of the concerned AECMA Commission following comment by the manufacturers of the Member countries.

Aerospace Series Steel FE-PA3601 (X6CrNiTi18-10) Air Melted Softened and Cold Rolled Sheet and Strip a Less Than or Equal to 3 mm Rm Greater Than or Equal to 800 MPa Edition P 1

AECMA PREN 3346-1997 航空航天系列.铝合金 AL-P2014A-T3结构用冷拉板材 0,6 mm小于或等于a小于或等于12,5 mm

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-2.

Aerospace Series Aluminium Alloy AL-P2014A-T3 Drawn Tube for Structural Applications 0,6 mm Less Than or Equal to a Less Than or Equal to 12,5 mm Edition P 2

AECMA PREN 3991-1997 航空航天系列.FE-PA2801(X60NiMnCr13-5-3)非热处理钢　锻坯 a 或 直径D小于或等于350mm

This standard specifies the characteristics of screws, 100°countersunk normal head, offset cruciform recess, threaded to head, in alloy steel, cadmium plated.

Aerospace Series Steel FE-PA2801 (X60NiMnCr13-5-3) Non Heat Treated Forging Stock a or D Less Than or Equal to 350 mm Edition P 1

AECMA PREN 4089-1997 航空航天系列.真空感应熔炼和真空电弧再熔、软化FE-PL5101(13MoCrNiV4-4-3-1)钢　锻坯a 或 直径D小于或等于150mm

This ((Aerospace Series. pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Commission following comment by the Member countries.

Aerospace Series Steel FE-PL5101 (13MoCrNiV4-4-3-1) Vacuum Induction Melted and Vacuum Arc Remelted Softened Forging Stock a or D Less Than or Equal to 150 mm Edition P 1

AECMA PREN 4094-1997 航空航天系列.真空熔炼非热处理Ni-CH1305(NiCr16Co10Mo8Al4Ti4)耐热合金　再熔料

This standard specifies the rules for the marking of aerospace products. It is applicable whenever referenced in the definition document of the product.

Aerospace Series Heat Resisting Alloy NI-CH1305 (NiCr16Co10Mo8Al4Ti4) Vacuum Melted Non Heat Treated Remelting Stock Edition P 1

AECMA PREN 4096-1997 航空航天系列.真空熔炼非热处理Ni-CD1401(NiCo10W10Cr9Al6Ta3)耐热合金　再熔料

This standard specifies the characteristics of cadmium plated steel lockwashers, for use with plain round nuts intended primarily for bearing retention in aerospace construction.

Aerospace Series Heat Resisting Alloy NI-CD1401 (NiCo10W10Cr9Al6Ta3) Vacuum Melted Non Heat Treated Remelting Stock Edition P 1

AECMA PREN 3994-1997 航空航天系列.FE-CM1501(X13CrNiMoCo12-3-2-2)非热处理钢　再熔原料

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258.

Aerospace Series Steel FE-CM1501 (X13CrNiMoCo12-3-2-2) Non Heat Treated Remelting Stock Edition P 1

AECMA PREN 4095-1997 航空航天系列.真空熔炼非热处理Ni-CH1305(NiCr16Co10Mo8Al4Ti4)耐热合金　精密铸件

This standard specifies f o r the aerospace application, the mechanical properties for bar De≤100 mm, solution annealed and precipitation hardened, in stee1 FE-PM65. Unless otherwise specified by the drawing, the order or the inspection schedule, the present standard shall be used in conjunction with the referenced EN standards.

Aerospace Series Heat Resisting Alloy NI-CH1305 (NiCr16Co10Mo8Al4Ti4) Vacuum Melted Non Heat Treated Precision Castings Edition P 1

AECMA PREN 4412-1996 航空航天系列.环有螺纹自动锁左手螺纹合金FE-PL76银器.P1版

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make but find it generally acceptable it would be helpful if you would notify us accordingly. Suggestions entailing revision of the text should indicate the preferred wording.

Aerospace Series Rings, Threaded, Self-Locking, Left-Handed Thread, in Alloy Steel FE-PL76, Silver Plated Edition P1

AECMA PREN 3120-1996 航空航天系列.钛合金TI-P46003非热锻2级锻件溶液或沉积处理a或 直径D小于或等于360mm P 2版

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-4.

Aerospace Series Titanium Alloy TI-P64003 Cold Worked and Stress Relieved Seamless Tube for Pressure Systems 4 mm Less Than or Equal to D Less Than or Equal to 51 mm 690 MPa Less Than or Equal to Rm Less Than or Equal to 1 030 MPa Edition P 2

AECMA PREN 4096-1996 航空航天系列.真空熔炼非热处理Ni-CD1401(NiCo10W10Cr9Al6Ta3)耐热合金　再熔料

This draft is now available for public comment and your views and technical comments on it muld be appreciated. Ifyou have no specific comments to make but fmd it generally acceptable it muld be helpfu! if you mould notify us accordingly Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.

Aerospace Series Heat Resisting Alloy NI-CD14XX (NiCo10W10Cr9Al6Ta3Hf2Ti2) Vacuum Melted Non Heat Treated Remelting Stock Edition P 1

AECMA PREN 3816-1996 航空航天系列.FE-PA3601(X6CrNiTi18-10) 空气熔炼钢 、软化和冷轧　薄板和带 a小于或等于3 mm ,Rm≥800MPa.P1版

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make but find it generally acceptable it would be helpful if you would notify us accordingly. Suggestions entailing revision of the text should indicate the preferred wording.

Aerospace Series Corrosion Resisting Steel FE-PA15 Softened Plus Cold Drawn Sheets and Strips for Components of Self-Locking Nuts (Cages, Washers, Etc.) a Less Than or Equal to 3 mm Edition P1