ZH
RU
ES

How to use the diluter

How to use the diluter, Total:266 items.

In the international standard classification, How to use the diluter involves: Lubricants, industrial oils and related products, Measurement of fluid flow, Fuels, Veterinary medicine, Farming and forestry, Air quality, Paint ingredients, Wastes, Water quality, Protection against fire, Waxes, bituminous materials and other petroleum products, Road engineering, Nuclear energy engineering, Construction materials, Test conditions and procedures in general, Organic chemicals, Hydraulic fluids, Paints and varnishes, Microbiology, Welding, brazing and soldering, Plastics, Footwear, Raw materials for rubber and plastics, Installations in buildings, Quality, Measurement of volume, mass, density, viscosity, Analytical chemistry, Textile fibres, Thermodynamics and temperature measurements, Explosion protection, Sterilization and disinfection, Fluid storage devices, Kitchen equipment, Burners. Boilers, Medical equipment, Aerospace electric equipment and systems, Electricity. Magnetism. Electrical and magnetic measurements, Glass, Construction industry, Surface treatment and coating, Equipment for children, Industrial automation systems, Sports equipment and facilities, Protective equipment, Domestic, commercial and industrial heating appliances, Radiation measurements, Fluid power systems, Ergonomics, Linear and angular measurements, Electrical accessories, Semiconductor devices.

American Society for Testing and Materials (ASTM), How to use the diluter

ASTM D3525-04(2016) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D8004-23 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
ASTM D7593-14 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
ASTM C1926-23 Standard Test Method for Measurement of Glass Dissolution Rate Using Stirred Dilute Reactor Conditions on Monolithic Samples
ASTM D3143-98 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus (Withdrawn 2007)
ASTM D8004-15 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
ASTM E2029-11(2019) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM D3272-76(2003) Standard Practice for Vacuum Distillation of Solvents From Solvent-Reducible Paints For Analysis
ASTM D3143/D3143M-19 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM E741-00(2006)e1 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM E741-00 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM D7593-22 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
ASTM D7593-13 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
ASTM E2515-09 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM E741-23 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM E2515-07 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM E2515-11(2017) Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM D3142-05 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
ASTM C1380-97 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
ASTM C1380-04 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
ASTM E2029-99(2004) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM E2029-99 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM E202-09 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
ASTM D3143-08 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM D7647-10 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
ASTM D3524-14 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
ASTM D3792-99 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM D3525-04 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D3792-91e1 Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatography
ASTM D3792-05(2015) Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
ASTM C1380-04(2011) Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
ASTM D3525-04(2010) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D3524-04 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
ASTM D3525-93(2002)e1 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D3525-20 Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography
ASTM D7647-10(2018) Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinc
ASTM E906/E906M-17 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
ASTM E1763-06 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
ASTM E1763-98 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
ASTM E1763-98(2003) Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
ASTM D2426-93(2014) Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
ASTM F609-05 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM E2965-17 Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM F609-96e1 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM F609-96 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM E1354-04a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-04 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM E1354-03 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E2090-06 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM E2090-12(2020) Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM E1354-10a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E2314-03(2014) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM E1354-09 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-02 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-99 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-23 Red Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (Standard + Redline PDF Bundle)
ASTM E1354-08 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-08a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-10 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-02d Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-17 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-15 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM F3321-19 Standard Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices

British Standards Institution (BSI), How to use the diluter

BS 3680-2D:1993 Measurement of liquid flow in open channels. Dilution methods. Methods of measurement using fluorescent tracers
BS 3680-2C:1993 Measurement of liquid flow in open channels. Dilution methods. Methods of measurement using chemical tracers
BS 6782-16:2001 Binders for paints. General methods of test for water-dilutable binders
BS ISO 18073:2004 Water quality. Determination of tetra- to octa-chlorinated dioxins and furans. Method using isotope dilution HRGC/HRMS
BS ISO 25597:2013 Stationary source emissions. Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
BS EN ISO 8780-6:1991 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a triple-roll mill
BS EN ISO 8780-4:1991 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a bead mill
BS EN ISO 8780-3:1991 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a high speed impeller mill
BS EN ISO 8780-5:1991 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using an automatic muller
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS EN ISO 1833-28:2020 Textiles. Quantitative chemical analysis - Mixtures of chitosan with certain other fibres (method using diluted acetic acid)
BS EN ISO 16852:2010 Flame arresters. Performance requirements, test methods and limits for use
BS 6696:1986 Methods for use and testing of capacity of volumetric glassware
BS EN 3841-306:2005 Aerospace series - Circuit breakers - Test methods - Service life
BS EN 3841-306:2004 Circuit breakers-Test methods-Part 306:Service life
BS ISO 23907-2:2019 Sharps injury protection. Requirements and test methods - Reusable sharps containers
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS EN 12868:1999 Child use and care articles. Methodes for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers
BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
BS EN 14974:2006 Facilities for users of roller sports equipment — Safety requirements and test methods
BS EN 14974:2007 Facilities for users of roller sports equipment - Safety requirements and test methods
DD 253-2001 Mouthguards for use in sport and recreation. Requirements and test methods
BS EN 13240:2001+A2:2004(2008) Roomheaters fired by solid fuel - Requirements and test methods
BS EN 13240:2001 Roomheaters fired by solid fuel - Requirements and test methods
BS EN 13240:2001+A2:2004 Roomheaters fired by solid fuel - Requirements and test methods
BS EN 12874:2001 Flame Arresters - Performance Requirements, Test Methods and Limits for Use
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS ISO 18869:2017 Tracked Changes. Hydraulic fluid power. Test methods for couplings actuated with or without tools
BS EN 14974:2006+A1:2010 Facilities for users of roller sports equipment.Safety requirements and test methods
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS EN 60749-23:2004+A1:2011 Semiconductor devices. Mechanical and climatic test methods. High temperature operating life
BS EN ISO 16852:2016 Tracked Changes. Flame arresters. Performance requirements, test methods and limits for use
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments

CU-NC, How to use the diluter

NC 26-157-1986 Veterinary Drugs. Newcastle La Sota Freeze-Dried Vaccine Diluent. Testing Method

Association Francaise de Normalisation, How to use the diluter

NF U47-107:2004 Animal health analysis methods - Guidelines for antimicrobial susceptibility testing with the agar diffusion method.
NF X43-052*NF ISO 25597:2014 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
NF T31-110:1988 EXTENDERS. NATURAL SILICA FOR PAINT INDUSTRY. SPECIFICATIONS AND TEST METHODS.
NF U47-106:2004 Animal health analysis methods - In-vitro determination of the susceptibility of bacterial to antimicrobial agents using the agar dilution method.
NF ISO 9555-1:1994 Mesure de débit des liquides dans les canaux découverts - Méthodes de dilution en régime permanent utilisant des traceurs - Partie 1 : généralités.
NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
NF ISO 9555-3:1994 Mesure de débit des liquides dans les canaux découverts - Méthodes de dilution en régime permanent utilisant des traceurs - Partie 3 : traceurs chimiques.
NF ISO 9555-2:1994 Mesure de débit des liquides dans les canaux découverts - Méthodes de dilution en régime permanent utilisant des traceurs - Partie 2 : traceurs radioactifs.
NF T66-009:1969 Petroleums and derivatives. Closed cup flash point of fluidized and cut-back asphalts using the abel closed tester.
NF ISO 9555-4:1994 Mesure de débit des liquides dans les canaux découverts - Méthodes de dilution en régime permanent utilisant des traceurs - Partie 4 : traceurs fluorescents.
NF T31-210-1*NF EN ISO 8780-1:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 1 : introduction.
NF T31-111:1991 EXTENDERS. THERMALY TREATED SILICA FOR PAINT INDUSTRY. SPECIFICATIONS AND TEST METHODS.
NF T31-210-4*NF EN ISO 8780-4:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 4 : dispersion using a bead mill.
NF T31-210-3*NF EN ISO 8780-3:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 3 : dispersion using a high-speed impeller mill.
NF T31-210-2*NF EN ISO 8780-2:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 2 : dispersion using an oscillatory shaking machine.
NF T31-210-6*NF EN ISO 8780-6:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 6 : dispersion using a triple-roll mill.
NF T31-210-5*NF EN ISO 8780-5:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 5 : dispersion using an automatic muller.
FD CEN/TR 16496:2014 Produits de construction - Évaluation de l'émission de substances dangereuses - Utilisation de méthodes d'évaluation horizontales harmonisées
FD P01-024*FD CEN/TR 16496:2014 Construction Products . Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods
NF EN 15250:2007 Appareils de chauffage domestique à combustible solide à libération lente de chaleur - Exigences et méthodes d'essai
NF EN 1739:2007 Appareils de chauffage domestique à combustible solide à libération lente de chaleur - Exigences et méthodes d'essai
NF EN 1993-4-2:2007 Appareils de chauffage domestique à combustible solide à libération lente de chaleur - Exigences et méthodes d'essai
NF EN 60335-2-97:2007 Appareils de chauffage domestique à combustible solide à libération lente de chaleur - Exigences et méthodes d'essai
NF EN 1993-1-6:2007 Appareils de chauffage domestique à combustible solide à libération lente de chaleur - Exigences et méthodes d'essai
NF EN ISO 15792-1:2020 Produits consommables pour le soudage - Méthodes d'essai - Partie 1 : préparation des pièces d'essai et des éprouvettes de métal fondu hors dilution pour le soudage de l'acier, du nickel et des alliages de nickel
NF S66-402:2011 Flame arresters - Performance requirements, test methods and limits for use.
NF S66-402*NF EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use
NF EN ISO 16852:2017 Arrête-flammes - Exigences de performance, méthodes d'essai et limites d'utilisation
NF B35-309:1983 Laboratory glassware - Volumetric glassware - Methods for testing and use
NF ISO 18869:2020 Transmissions hydrauliques - Méthodes d'essai pour les raccords actionnés avec ou sans outils
NF E32-131:1982 Steam generators. Conventional assessment of wall loss in operation.
NF EN ISO 1833-28:2020 Textiles - Analyse chimique quantitative - Partie 28 : mélanges de chitosane avec certaines autres fibres (méthode à l'acide acétique dilué)
NF S52-401:2010 Facilities for users of roller sports equipment - Safety requirements and test methods.
NF S52-401/IN1*NF EN 14974/IN1:2010 Facilities for users of roller sports equipment - Safety requirements and test methods
NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
NF S54-023*NF EN 14036:2004 Child use care articles - Baby bouncers - Safety requirements and test methods

IN-BIS, How to use the diluter

IS 82-1973

国家市场监督管理总局、中国国家标准化管理委员会, How to use the diluter

GB/T 39299-2020 Methods for disposing reused thinner waste in the production of TFT-LCD
GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments

SE-SIS, How to use the diluter

SIS SS 15 02 14-1992 Petroleum products — Determination of gasoline diluent in used gasoline engine oils by distillation

未注明发布机构, How to use the diluter

BS ISO 25597:2013(2015) Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions

Group Standards of the People's Republic of China, How to use the diluter

T/ZAAM 0001-2021 Odor evaluation method for interior parts and materials of passenger cars--dilution method
T/SXQCA 002-2022 Using digital photography (DR) equipment to implement the dispersion screening method of thermoluminescencedetectors

Danish Standards Foundation, How to use the diluter

DS/ISO 18073:2007 Water quality - Determination of tetra- to octa-chlorinated dioxins and furans - Method using isotope dilution HRGC/HRMS
DS/EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use

Standard Association of Australia （SAA）, How to use the diluter

AS 4276.17.2:2016 Water microbiology, Method 17.2: Spores of Clostridium perfringens — Estimation of most probable number (MPN) using the multiple tube dilution technique
AS ISO 9555.3:2023 Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow, Part 3: Chemical tracers

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the diluter

GB/T 8998-1988 Environmental thermoluminescence dosimeter and its usage
GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity

Korean Agency for Technology and Standards (KATS), How to use the diluter

KS M ISO 8780-1:2002 Pigments and extenders－Methods of dispersion for assessment of dispersion characteristics－Part 1：Introduction
KS M ISO 8780-4:2007 Pigments and extenders－Methods of dispersion for assessment of dispersion characteristics－Part 4：Dispersion using a bead mill
KS M ISO 8780-6:2007 Pigments and extenders－Methods of dispersion for assessment of dispersion characteristics－Part 6：Dispersion using a triple-roll mill
KS M ISO 8780-3:2007 Pigments and extenders－Methods of dispersion for assessment of dispersion characteristics－Part 3：Dispersion using a high-speed impeller mill
KS M ISO 8780-5:2007 Pigments and extenders－Methods of dispersion for assessment of dispersion characteristics－Part 5：Dispersion using an automatic muller
KS M ISO 8780-2:2007 Pigments and extenders－Methods of dispersion for assessment of dispersion characteristics－Part 2：Dispersion using an oscillatory shaking machine
KS T 1348-2011 Transport packaging-General specifications for testing
KS C CISPR 19-2004 Electromagnetic compatibility(EMC)- Guidance on the use of the substitution method for measurement of radiation from microwave ovens for frequencies above 1 GHz
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS P 1101-2010 Guidance for selection, use and maintenance of respiratory protective devices
KS D ISO 4531-1:2005 Vitreous and porcelain enamels-Release of lead and cadmium from enamelled ware in contact with food-Part 1:Method of test
KS B 0731-2001 Mechanical vibration and shock-Analytical methods of assessing shock of resistance mechanical systems-Information exchange between suppliers and users of analyses
KS F 2508-2007(2017) Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
KS B ISO 4787:2007 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS B ISO 4787:2009 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS L ISO 4787-2016(2021) Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity

German Institute for Standardization, How to use the diluter

DIN 51380:2016 Testing of lubricants - Test for fuel diluent in used automotive engine oils - Gas chromatography method
DIN 51380:1990 Testing of lubricants; test for fuel diluent in used automotive engine oils; gas chromatography method
DIN EN ISO 1833-28:2020-08 Textiles - Quantitative chemical analysis - Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid) (ISO 1833-28:2019); German version EN ISO 1833-28:2020
DIN EN ISO 10704:2020-12 Water quality - Gross alpha and gross beta activity - Test method using thin source deposit (ISO 10704:2019); German version EN ISO 10704:2019
DIN CEN/TR 16496:2013-12*DIN SPEC 18341:2013-12 Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods; German version CEN/TR 16496:2013
DIN EN 13900-5:2005 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test; German version EN 13900-5:2005
DIN EN ISO 8780-1:1995 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction (ISO 8780-1:1990); German version EN ISO 8780-1:1995
DIN EN ISO 8780-4:1995 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990); German version EN ISO 8780-4:1995
DIN 38412-31:1989 German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of fish to the toxicity of waste water by way of a dilution series (L 31)
DIN EN ISO 8780-3:1995 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990); German version EN ISO 8780-3:1995
DIN EN ISO 8780-2:1995 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine (ISO 8780-2:1990); German version EN ISO 8780-2:1995
DIN EN ISO 8780-5:1995 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990); German version EN ISO 8780-5:1995
DIN EN ISO 8780-6:1995 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990); German version EN ISO 8780-6:1995
DIN 58940-7:1994 Medical microbiology - Methods for the determination of susceptibility of pathogens (except mycrobacteria) to antimicrobial agents - Part 7: Determination of the minimum bactericidal concentration (MBC) with the aid of microdilution
DIN CEN/TR 16496:2013 Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods; German version CEN/TR 16496:2013
DIN CEN/TR 16710-1:2017-09*DIN SPEC 33427:2017-09 Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines; German version CEN/TR 16710-1:2015
DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN 12791-3:1983-06 Laboratory glassware; density hydrometers; use and test methods
DIN EN 13240:2005 Roomheaters fired by solid fuel - Requirements and test methods; German version EN 13240:2001 + A2:2004
DIN EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
DIN 7908:2003 Gymnastic equipment - Vaulting boxes - Construction, execution, safety requirements and test methods; Consolidated version with DIN EN 916

ES-UNE, How to use the diluter

UNE-EN ISO 1833-28:2021 Textiles - Quantitative chemical analysis - Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid) (ISO 1833-28:2019)
UNE-EN ISO 10704:2019 Water quality - Gross alpha and gross beta activity - Test method using thin source deposit (ISO 10704:2019) (Endorsed by Asociación Española de Normalización in May of 2019.)
UNE-EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)

TH-TISI, How to use the diluter

TIS 2489.2-2010 Standard test method for thinner.part 2: solvent composition analysis by gas chromatograph

Military Standard of the People's Republic of China-General Armament Department, How to use the diluter

GJB 2589.22A-2021 Test methods for physical and chemical properties of military leather fur Part 22: Determination of pH and dilution difference
GJB 2165-1994 Method for determining absorbed dose of electronic devices using thermoluminescence dosimetry system

International Organization for Standardization (ISO), How to use the diluter

ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO 6486-1:1981 Ceramic ware in contact with food; Release of lead and cadmium; Part 1 : Method of test
ISO 16852:2008 Flame arresters - Performance requirements, test methods and limits for use
ISO 16852:2016 Flame arresters - Performance requirements, test methods and limits for use
ISO 7086-1:1982 Glassware and glass ceramic ware in contact with food; Release of lead and cadmium; Part 1 : Method of test
ISO 4787:1984 Laboratory glassware; Volumetric glassware; Methods for use and testing of capacity
ISO 4787:2021 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use
ISO 7864:2016 Sterile hypodermic needles for single use - Requirements and test methods
ISO/CD TR 16710-1 Ergonomics methods — Part 1: Feedback method : a method to understand how end users perform their work with machines

European Committee for Standardization (CEN), How to use the diluter

EN ISO 8780-6:1995 Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 6: Dispersion Using a Triple-Roll Mill (ISO 8780-6 : 1990)
EN ISO 8780-1:1995 Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 1: Introduction (ISO 8780-1 : 1990)
EN ISO 8780-4:1995 Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 4: Dispersion Using a Bead Mill (ISO 8780-4: 1990)
EN ISO 8780-2:1995 Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 2: Dispersion Using an Oscillatory Shaking Machine (ISO 8780-2: 1990)
EN ISO 8780-5:1995 Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 5: Dispersion Using an Automatic Muller (ISO 8780-5 : 1990)
CEN/TR 16496:2013 Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods
EN 1899-2:1998 Water Quality - Determination of Biochemical Oxygen Demand After N Days (BODn) - Part 2: Method for Undiluted Samples ISO 5815:1989, Modified
PD CEN/TR 16496:2013 Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods
EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
EN 13900-3:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling
CEN/TR 16710-1:2015 Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines
EN 14974:2006 Facilities for users of roller sports equipment - Safety requirements and test methods (Incorporates Amendment A1: 2010)
EN 12874:2001 Flame Arresters - Performance Requirements, Test Methods and Limits for Use
PD CEN/TR 16710-1:2015 Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines
EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
EN ISO 16852:2016 Flame arresters - Performance requirements@ test methods and limits for use

Japanese Industrial Standards Committee (JISC), How to use the diluter

JIS K 3702:2008 Test methods for Culture media -- Preparation of initial suspension and decimal dilutions
JIS S 2075:2011 Measurement method of efficiency for domestic gas and oil water heater under standard usage mode
JIS A 1232:2023 Method for obtaining soil samples using the fixed piston sampler

PT-IPQ, How to use the diluter

NP EN 1597-1-2000 Welding consumables Test methods Part 1:Test piece for all-weld metal test specimens in steel,nickel and nickel alloys
NP 3064-1988 Fire protection Portable fire extinguishers use

American National Standards Institute （ANSI), How to use the diluter

ANSI/ASTM D1823:1995 Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer (08.01)
ANSI/ASTM F609:1997 Test Method for Using a Horizontal Pull Slipmeter (HPS)
ANSI/NFPA 271-2009 Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ANSI/ASTM D1824:1995 Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates by Brookfield Viscometer (08.01)

API - American Petroleum Institute, How to use the diluter

API DR79-1984 Development of a Diluting Concentration method for Testing the Acute Toxicity of Chemically Dispersed Oil@ and the Results of Comparative studies (Reprinted in 1993)
API PUBL 4659-1998 Graphical Approach for Determining Site-Specific Dilution-Attenuation Factors (DAFs) (Technical Background Document and User's Guide; Cover Page and A-20 -1998)

CZ-CSN, How to use the diluter

CSN IEC 596:1994 Definitions of test method terms for semiconductor radiation detectors and scintillation counting
CSN 27 0140 Cast.5-1986 Cranes and elevating machines Approaches and operating positions
CSN 85 6201-1983 Multi — use hypodermic needles Technical requirements. Testing methods

ES-AENOR, How to use the diluter

UNE 103-103-1994 Determination of the liquid limit kof a soil by the casagrande apparatus method

HU-MSZT, How to use the diluter

MSZ 8880/2.lap-1963

IT-UNI, How to use the diluter

AT-ON, How to use the diluter

ONORM L 5233-1998 Agricultural vehicles and seif propelled machines used in mountainous regions - Parking brake - Test methods

VN-TCVN, How to use the diluter

TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use
TCVN 1044-2007 Laboratory glassware.Volumetric glassware.Methods for use and testing of capacity

RU-GOST R, How to use the diluter

GOST 30587-1998 Electrically operated household food preparation appliances. Measuring methods of operating characteristics
GOST 31851-2012 Industrial gas-using equipment. Air heaters. Test methods
GOST 28488-1990 Multichannel analyzers as multichannel scalers. Test methods
GOST 22967-1990 Injection medical syringes of repeatid application. General technical requirements and test methods

Professional Standard - Machinery, How to use the diluter

JB/T 51021-1999 Reliability assessment method for square bale baler knotter (internal use)
JB/T 50191-1999 Operational reliability requirement and test requirement for electric appliances on machine tools (only for internal use)

JSAE - Society of Automotive Engineers of Japan@ Inc., How to use the diluter

JASO E004-1992 Sampling Method of Automobile Exhaust Gas Using a Constant Volume Sampler (CVS)

Indonesia Standards, How to use the diluter

SNI 03-0450-1989 Test method for reactive alkaline properties of cement with concrete aggregates using stirring rod.

RO-ASRO, How to use the diluter

STAS SR ISO 9283+A1:1996 Manipulating industrial robots - Performance criteria and related test methods
STAS SR ISO 9283+A1/C1:1996 Manipulating industrial robots - Performance criteria and related test methods

KR-KS, How to use the diluter

KS L ISO 4787-2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS B ISO 4787-2007 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity

YU-JUS, How to use the diluter

JUS N.N6.373-1987 Radiocommunicaions .Methods of measurement for television transmitters and transposers employing insertino Test signals.Filters use in measurement

ETSI - European Telecommunications Standards Institute, How to use the diluter

ETR 008-1990 Network Aspects (NA); the Method for the Characterisation of the Machine-Machine Interfaces Utilised by a Telecommunications Management Network (TMN)

Institute of Electrical and Electronics Engineers (IEEE), How to use the diluter

NFPA (Fire) 271 Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter, 2009 Edition
NFPA (Fire) 272 NFPA 272: Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter, 2003 edition

CEN - European Committee for Standardization, How to use the diluter

EN 14974:2019 Skateparks - Safety requirements and test methods

European Telecommunications Standards Institute (ETSI), How to use the diluter

ETSI ETR 008-1990 Network Aspects (NA); the Method for the Characterisation of the Machine-Machine Interfaces Utilised by a Telecommunications Management Network (TMN)

PL-PKN, How to use the diluter

PN B13018-1992 Laboratory glassware. Volumetric glassware. Methods for use and testing of capacity

CO-ICONTEC, How to use the diluter

ZA-SANS, How to use the diluter

SANS 4787:1984 Laboratory glassware - Volumetric glassware - Methods for use and testing of capacity

International Electrotechnical Commission (IEC), How to use the diluter

IEC 60350-1:2016/ISH1:2021 Interpretation sheet 1 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance