ZH
RU
ES

How to use the grinder

How to use the grinder, Total:303 items.

In the international standard classification, How to use the grinder involves: Inks. Printing inks, Leather technology, Paints and varnishes, Ceramics, Cutting tools, Construction materials, Non-textile floor coverings, Surface treatment and coating, Glass, Paint ingredients, Plastics, Fruits. Vegetables, Fuels, Extraction and processing of petroleum and natural gas, Road vehicles in general, Electromechanical components for electronic and telecommunications equipment, Corrosion of metals, Mechanical testing, Coals, Tea. Coffee. Cocoa, Electrical accessories, Testing of metals, Lubricants, industrial oils and related products, Linear and angular measurements, Environmental protection, Pipeline components and pipelines, Footwear, Installations in buildings, Products of the textile industry, Packaging materials and accessories, Non-metalliferous minerals, Vibration and shock with respect to human beings, Hand-held tools, Elements of buildings, Measurement of volume, mass, density, viscosity, Analytical chemistry, Laboratory medicine, Air quality, Water quality, Protection against fire, Explosion protection, Sterilization and disinfection, Aerospace electric equipment and systems, Fluid storage devices, Kitchen equipment, Burners. Boilers, Medical equipment, Electricity. Magnetism. Electrical and magnetic measurements, Construction industry, Products of the chemical industry, Equipment for the chemical industry, Industrial automation systems, On-board equipment and instruments, Cereals, pulses and derived products, Sports equipment and facilities, Protective equipment, Domestic, commercial and industrial heating appliances, Fluid power systems.

CZ-CSN, How to use the grinder

CSN 80 0833-1993 Textilie fabrics. Determination of abrasion resistance by propeller type abraser
CSN 36 1550 Cast.2-3-1989 Hand-held motor-operated electric grinders and polishers with rotating motion. Requirements for safety and testing methods
CSN 44 1332-1976 Determination of grindability of solid fuels by VUK method
CSN 36 1005 Cast.24-1984 Electrical appliainces for household and similair use. Critical values, methods of measurement and evaluation of noise. Mills for coffee.
CSN 27 0140 Cast.5-1986 Cranes and elevating machines Approaches and operating positions

American Society for Testing and Materials (ASTM), How to use the grinder

ASTM D1316-20 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
ASTM D7255-20 Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)
ASTM D1316-93(1996) Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
ASTM D1316-93(2001) Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
ASTM D1316-06 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
ASTM D1316-06(2011) Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
ASTM F510-93(1999) Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
ASTM F510/F510M-20 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
ASTM D4060-95 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D4060-19 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D387-00 Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
ASTM D387-00(2008) Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
ASTM D387-00(2017) Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
ASTM D1044-19 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser
ASTM B1023-22 Standard Test Method for Abrasion Resistance of Hard Anodic Coatings by a Taber-Type Abraser
ASTM F1978-00 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser
ASTM F2357-04 Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader
ASTM F2357-10 Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader
ASTM G76-02 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM C1353-98 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
ASTM C1353-98e1 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
ASTM G176-03(2017) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM D409/D409M-12e1 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
ASTM D7428-15 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM B794-97(2009) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM G77-17 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM D4170-10 Standard Test Method for Fretting Wear Protection by Lubricating Greases
ASTM C1353/C1353M-20 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
ASTM C1353-08 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
ASTM C1353/C1353M-20e1 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
ASTM C1353/C1353M-15a Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
ASTM F3152-16 Standard Test Method for Determining Abrasion Resistance of Inks and Coatings on Substrates Using Dry or Wet Abrasive Medium
ASTM G99-03 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM F735-94 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
ASTM F735-94(2001) Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
ASTM F735-17 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
ASTM D7625-10 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
ASTM D409/D409M-12 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
ASTM D409/D409M-11ae1 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
ASTM F3152-15 Standard Test Method for Determining Abrasion Resistance of Inks and Coatings on Substrates Using Norman Tool &x201c;WA-1010 Wet Abrader&x201d;
ASTM B794-97(2020) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM B794-97(2015) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM D3704-96(2006) Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
ASTM D3704-96(2012) Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D5416-95(2001) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
ASTM D5416-95 Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
ASTM D5416-95(2007) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
ASTM D5416-95(2012) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
ASTM C1243-93(2003) Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
ASTM D7428-08e1 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D6928-08 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM E405-04(2018) Standard Test Methods for Wear Testing Rotary Operators for Windows
ASTM F609-05 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM D5183-21 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
ASTM F3300-23 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
ASTM F3088-14 Standard Test Method for Use of a Centrifugation Method to Quantify/Study Cell-Material Adhesive Interactions
ASTM F609-96e1 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM F609-96 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM D5791-23 Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
ASTM D3975-93(1999) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM E2314-03(2014) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM D6595-17 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM F3321-19 Standard Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
ASTM D5707-05(2011)e1 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

British Standards Institution (BSI), How to use the grinder

BS EN ISO 7784-1:2016 Paints and varnishes. Determination of resistance to abrasion. Method with abrasive-paper covered wheels and rotating test specimen
BS EN ISO 7784-3:2016 Paints and varnishes. Determination of resistance to abrasion. Method with abrasive-paper covered wheel and linearly reciprocating test specimen
BS 7425-2:1991 Abrasive grains - Method for determining the capillarity
ISO 3262-21:2023 Extenders. Specifications and methods of test - Silica sand (unground natural quartz)
BS EN ISO 3262-21:2023 Extenders. Specifications and methods of test - Silica sand (unground natural quartz)
BS EN ISO 8780-6:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a triple-roll mill
BS EN ISO 8780-5:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using an automatic muller
BS EN ISO 8780-3:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a high speed impeller mill
BS EN ISO 7784-2:2016 Paints and varnishes. Determination of resistance to abrasion. Method with abrasive rubber wheels and rotating test specimen
BS ISO 23134:2022 Coffee and coffee products. Determination of particle size of ground roasted coffee. Horizontal sieving motion method using circular brushes
21/30397040 DC BS ISO 23134. Coffee and coffee products. Determination of particle size of ground roasted coffee. Horizontal sieving motion method-using circular brushes
22/30446455 DC BS EN ISO 3262-21. Extenders. Specifications and methods of test. Part 21. Silica sand (unground natural quartz)
BS EN 1071-2:2002 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by the crater grinding method
BS EN ISO 8780-4:1991 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a bead mill
BS EN ISO 8780-4:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a bead mill
BS EN ISO 28927-1:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Angle and vertical grinders
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS EN ISO 8780-5:1991 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using an automatic muller
BS EN ISO 7973:2015 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph
BS EN ISO 16852:2010 Flame arresters. Performance requirements, test methods and limits for use
BS EN 3745-503:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion
BS EN ISO 18771:2020 Anodizing of aluminium and its alloys. Method to test the surface abrasion resistance using glass-coated abrasive paper
BS EN ISO 7784-1:2023 Tracked Changes. Paints and varnishes. Determination of resistance to abrasion. Method with abrasive-paper covered wheels and rotating test specimen
BS 6696:1986 Methods for use and testing of capacity of volumetric glassware
BS EN 3841-306:2005 Aerospace series - Circuit breakers - Test methods - Service life
BS EN 3841-306:2004 Circuit breakers-Test methods-Part 306:Service life
BS ISO 23907-2:2019 Sharps injury protection. Requirements and test methods - Reusable sharps containers
BS EN 3475-511:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS EN ISO 7784-2:2023 Tracked Changes. Paints and varnishes. Determination of resistance to abrasion. Method with abrasive rubber wheels and rotating test specimen
BS 6043-2.15:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of grain stability of calcined coke using a laboratory vibration mill
BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
BS EN 3745-511:2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion
BS EN 14974:2006 Facilities for users of roller sports equipment — Safety requirements and test methods
BS EN 14974:2007 Facilities for users of roller sports equipment - Safety requirements and test methods
DD 253-2001 Mouthguards for use in sport and recreation. Requirements and test methods
BS EN 13240:2001+A2:2004(2008) Roomheaters fired by solid fuel - Requirements and test methods
BS EN 13240:2001 Roomheaters fired by solid fuel - Requirements and test methods
BS EN 13240:2001+A2:2004 Roomheaters fired by solid fuel - Requirements and test methods
BS EN 12874:2001 Flame Arresters - Performance Requirements, Test Methods and Limits for Use
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS ISO 18869:2017 Tracked Changes. Hydraulic fluid power. Test methods for couplings actuated with or without tools
BS EN 14974:2006+A1:2010 Facilities for users of roller sports equipment.Safety requirements and test methods

KR-KS, How to use the grinder

KS L 1629-2023 Test method for wear resistance of ceramic beads used in high-energy ball mill for milling and dispersion
KS M ISO 8780-5-2022 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 5: Dispersion using an automatic muller
KS R 1190-2023 Test method for automotive brake wear particle measurement using brake dynamometer
KS M ISO 8780-4-2022 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 4: Dispersion using a bead mill
KS M ISO 8780-6-2022 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 6: Dispersion using a triple-roll mill
KS M ISO 8780-3-2022 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 3: Dispersion using a high-speed impeller mill
KS L ISO 4787-2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS B ISO 4787-2007 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity

ES-UNE, How to use the grinder

UNE-EN ISO 7784-2:2016 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016)
UNE-EN 3475-503:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 503: Scrape abrasion (Endorsed by AENOR in April of 2002.)
UNE-EN 3475-511:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 511: Cable-to -cable abrasion (Endorsed by AENOR in August of 2002.)
UNE-EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)
UNE-EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
UNE-EN ISO 18771:2021 Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019)
UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)

RO-ASRO, How to use the grinder

STAS 7405-1988 PLASTIC MATERIALS Wear determination by abra?ion (Method by abrasive cylindcr)
STAS SR ISO 8780-5:1996 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller
STAS SR ISO 9283+A1:1996 Manipulating industrial robots - Performance criteria and related test methods
STAS SR ISO 9283+A1/C1:1996 Manipulating industrial robots - Performance criteria and related test methods

Korean Agency for Technology and Standards (KATS), How to use the grinder

KS L 6524-2001(2011) TESTING METHOD FOR GRAIN SIZE OF COATED ABRASIVE MICROGRITS(P240-P1200)
KS F 2508-2007(2017) Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
KS M ISO 8780-5:2022 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 5: Dispersion using an automatic muller
KS M ISO 8780-5:2007 Pigments and extenders－Methods of dispersion for assessment of dispersion characteristics－Part 5：Dispersion using an automatic muller
KS T 1348-2011 Transport packaging-General specifications for testing
KS M ISO 8780-5-2007(2017) Pigments and extenders－Methods of dispersion for assessment of dispersion characteristics－Part 5：Dispersion using an automatic muller
KS M ISO 8780-4:2022 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 4: Dispersion using a bead mill
KS M ISO 8780-6:2022 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 6: Dispersion using a triple-roll mill
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS P 1101-2010 Guidance for selection, use and maintenance of respiratory protective devices
KS M ISO 8780-3:2022 Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 3: Dispersion using a high-speed impeller mill
KS B ISO 4787:2007 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS B ISO 4787:2009 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS L ISO 4787-2016(2021) Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity

International Organization for Standardization (ISO), How to use the grinder

ISO 7784-1:2016 Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen
ISO 7784-3:2016 Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
ISO 19721:2022 Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
ISO 7784-2:2016 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen
ISO 8780-4:1990 Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 4: dispersion using a bead mill
ISO 8780-5:1990 Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 5: dispersion using an automatic muller
ISO 8780-6:1990 Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 6: dispersion using a triple-roll mill
ISO 16852:2008 Flame arresters - Performance requirements, test methods and limits for use
ISO 16852:2016 Flame arresters - Performance requirements, test methods and limits for use
ISO 4787:1984 Laboratory glassware; Volumetric glassware; Methods for use and testing of capacity
ISO 28927-1:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders
ISO 11125-9:2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 9: Wear testing and performance
ISO 4787:2021 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use
ISO 7864:2016 Sterile hypodermic needles for single use - Requirements and test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the grinder

GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity

German Institute for Standardization, How to use the grinder

DIN EN ISO 7784-2:2023-05 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2023); German version EN ISO 7784-2:2023
DIN EN ISO 7784-2:2023 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2023)
DIN EN ISO 3262-13:2022-10 Extenders - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO/DIS 3262-13:2022); German and English version prEN ISO 3262-13:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN ISO 3262-13 (1998-08).
DIN EN 196-6:2010 Methods of testing cement - Part 6: Determination of fineness; German version EN 196-6:2010
DIN EN ISO 7784-1:2016 Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016); German version EN ISO 7784-1:2016
DIN EN ISO 8780-6:1995-04 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990); German version EN ISO 8780-6:1995
DIN EN ISO 8780-5:1995-04 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990); German version EN ISO 8780-5:1995
DIN EN ISO 7784-3:2016 Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2016); German version EN ISO 7784-3:2016
DIN EN ISO 8780-3:1995-04 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990); German version EN ISO 8780-3:1995
DIN EN 1071-2:2003 Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method; German version EN 1071-2:2002
DIN EN ISO 3262-13:2023-09 Extenders - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:2023); German version EN ISO 3262-13:2023
DIN ISO 6104:2005-08 Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature (ISO 6104:2005)
DIN EN ISO 7973:2016-03 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992); German version EN ISO 7973:2015
DIN EN ISO 18771:2020-11 Anodizing of aluminium and its alloys - Method to test the surface abrasion resistance using glass-coated abrasive paper (ISO 18771:2019); German version EN ISO 18771:2020
DIN EN ISO 7973:2016 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992)
DIN EN 12472:2006 Method for the simulation of wear and corrosion for the detection of nickel release from coated items; German version EN 12472:2005
DIN CEN/TR 16710-1:2017-09*DIN SPEC 33427:2017-09 Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines; German version CEN/TR 16710-1:2015
DIN EN ISO 7784-2:2016 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016); German version EN ISO 7784-2:2016
DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN 12791-3:1983-06 Laboratory glassware; density hydrometers; use and test methods
DIN EN 13240:2005 Roomheaters fired by solid fuel - Requirements and test methods; German version EN 13240:2001 + A2:2004
DIN EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)

Japanese Industrial Standards Committee (JISC), How to use the grinder

JIS R 6011:1991 Testing method for grain size of coated abrasive macrogrits (P12-P220)
JIS R 6012:1991 Testing method for grain size of coated abrasive microgrits (P240-P1200)
JIS S 2075:2011 Measurement method of efficiency for domestic gas and oil water heater under standard usage mode
JIS A 1232:2023 Method for obtaining soil samples using the fixed piston sampler

European Committee for Standardization (CEN), How to use the grinder

EN ISO 3262-13:2023 Extenders - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:2023)
CEN EN 15542-2008_ Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods
EN ISO 8780-5:1995 Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 5: Dispersion Using an Automatic Muller (ISO 8780-5 : 1990)
EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
EN ISO 28927-1:2019 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019)
EN ISO 11125-9:2022 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 9: Wear testing and performance (ISO 11125-9:2021)
CEN/TR 16710-1:2015 Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines
EN 14974:2006 Facilities for users of roller sports equipment - Safety requirements and test methods (Incorporates Amendment A1: 2010)
EN 12874:2001 Flame Arresters - Performance Requirements, Test Methods and Limits for Use

RU-GOST R, How to use the grinder

GOST 24283-2014 Homogenized canned food for infants. Method for determination the degree of milling
GOST R 50563.4-1993 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a bead mill
GOST R 50563.5-1993 Pigments and extenders. Methods of dispersion for assessment of characteristics. Dispersion using an automatic muller
GOST R 50221-1992 Quartz sand ground sandstone, quarzite and veiny quartz for glass industry. Methods for determination of aluminium oxide
GOST 30587-1998 Electrically operated household food preparation appliances. Measuring methods of operating characteristics
GOST 31851-2012 Industrial gas-using equipment. Air heaters. Test methods
GOST 28488-1990 Multichannel analyzers as multichannel scalers. Test methods
GOST 22967-1990 Injection medical syringes of repeatid application. General technical requirements and test methods

Professional Standard - Petroleum, How to use the grinder

SY/T 5415-2003 Use and dull grading system of bits
SY/T 5415-2012 Use and dull grading system of bits
SY 5415-2012 Drill bit use basic rules and wear evaluation method
SY/T 6050-1994 PDC bit use basic rules and wear evaluation method

未注明发布机构, How to use the grinder

BS EN ISO 8780-6:1995(2000) Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 6 : Dispersion using a triple - roll mill
BS EN ISO 8780-5:1995(2000) Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 5 : Dispersion using an automatic muller
BS EN ISO 8780-3:1995(2000) Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 3 : Dispersion using a high - speed impeller mill
BS EN 1071-2:2002(2004) Advanced technical ceramics — Methods of test for ceramic coatings — Part 2 : Determination of coating thickness by the crater grinding method
BS EN ISO 8780-4:1995(2000) Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics — Part 4 : Dispersion using a bead mill

Association Francaise de Normalisation, How to use the grinder

NF EN ISO 8780-6:1995 Pigments et matières de charge - Méthodes de dispersion pour évaluer la dispersibilité - Partie 6 : dispersion à l'aide d'une broyeuse tricylindre.
NF T30-079-2*NF EN ISO 7784-2:2016 Paints and varnishes - Determination of resistance to abrasion - Part 2 : method with abrasive rubber wheels and rotating test specimen
NF A92-801-2:2003 Advanced technical ceramics - Methods of test for ceramic coatings - Part 2 : determination of coating thickness by the crater grinding method.
NF T31-210-5*NF EN ISO 8780-5:1995 Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Part 5 : dispersion using an automatic muller.
NF ISO 11035:1995 Analyse sensorielle - Recherche et sélection de descripteurs pour l'élaboration d'un profil sensoriel, par approche multidimensionnelle
NF EN ISO 7973:2016 Céréales et produits de mouture des céréales - Détermination de la viscosité de la farine - Méthode utilisant un amylographe
NF S66-402:2011 Flame arresters - Performance requirements, test methods and limits for use.
NF S66-402*NF EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use
NF EN ISO 16852:2017 Arrête-flammes - Exigences de performance, méthodes d'essai et limites d'utilisation
NF B35-309:1983 Laboratory glassware - Volumetric glassware - Methods for testing and use
NF E90-321-1:2010 Hand-held portable power tools - Test method for evaluation of vibration emission - Part 1 : angle and vertical grinders.
NF ISO 18869:2020 Transmissions hydrauliques - Méthodes d'essai pour les raccords actionnés avec ou sans outils
NF E32-131:1982 Steam generators. Conventional assessment of wall loss in operation.
NF EN ISO 18771:2020 Anodisation de l'aluminium et de ses alliages - Méthode de détermination de la résistance à l'usure d'une surface à l'aide de papier abrasif recouvert de verre
NF EN ISO 7784-2:2023 Peintures et vernis - Détermination de la résistance à l'abrasion - Partie 2 : méthode utilisant des roues abrasives en caoutchouc et une éprouvette rotative
FD CEN/TR 17421:2020 Aliments pour animaux - Méthodes d'échantillonnage et d'analyse - Recommandations pour l'organisation et l'évaluation des études comparatives interlaboratoires utilisant des méthodes d'analyses multianalytes
NF S52-401:2010 Facilities for users of roller sports equipment - Safety requirements and test methods.
NF S52-401/IN1*NF EN 14974/IN1:2010 Facilities for users of roller sports equipment - Safety requirements and test methods
NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
NF EN ISO 8780-5:1995 Pigments et matières de charge - Méthodes de dispersion pour évaluer la dispersibilité - Partie 5 : dispersion à l'aide d'une broyeuse automatique à plateaux.
NF S54-023*NF EN 14036:2004 Child use care articles - Baby bouncers - Safety requirements and test methods

Danish Standards Foundation, How to use the grinder

DS/EN ISO 8780-5:1996 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller
DS/EN ISO 8780-6:1996 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - part 6: Dispersion using a triple-roll-mill
DS/EN ISO 8780-3:1996 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill
DS/ENV 1071-2:1993 Advanced technical ceramics. Methods of test for ceramic coatings. Part 2: Determination of coating thickness by the cap grinding method
DS/EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
DS/EN ISO 8780-4:1996 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill
DS/EN 3475-511:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion

AENOR, How to use the grinder

UNE-EN ISO 8780-5:1996 PIGMENTS AND EXTENDERS. METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 5: DISPERSION USING AN AUTOMATIC MULLER. (ISO 8780-5:1990).
UNE-EN ISO 8780-6:1996 PIGMENTS AND EXTENDERS. METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 6: DISPERSION USING A TRIPLE-ROLL MILL. (ISO 8780-6:1990).

Professional Standard - Energy, How to use the grinder

NB/T 11152-2023 Ground rules for use of geothermal drilling bits and wear assessment methods

National Aeronautics and Space Administration (NASA), How to use the grinder

NASA NACA-TN-3996-1957 Investigation of a short-annular-diffuser configuration utilizing suction as a means of boundary-layer control

Lithuanian Standards Office , How to use the grinder

LST EN ISO 8780-6:2002 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990)
LST EN ISO 8780-5:2002 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990)
LST EN ISO 8780-3:2002 Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill (ISO 8780-3:1990)
LST EN 3475-511-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion
LST ISO 7973:2006 Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (idt ISO 7973:1992)

ES-AENOR, How to use the grinder

UNE 127-005 Pt.1-1990
UNE 103-103-1994 Determination of the liquid limit kof a soil by the casagrande apparatus method

Professional Standard - Machinery, How to use the grinder

JB/T 50149-2000 Small-type roller mills - Product reliability evaluation method (internal use)
JB/T 51021-1999 Reliability assessment method for square bale baler knotter (internal use)

AGMA - American Gear Manufacturers Association, How to use the grinder

P129.28-1982 New Possibilities in Gear Finishing Using the Form Grinding Method

工业和信息化部, How to use the grinder

JB/T 13837-2020 Method for determination of wear resistance of filter materials used in bag dust collectors

American National Standards Institute （ANSI), How to use the grinder

ANSI/ASTM F609:1997 Test Method for Using a Horizontal Pull Slipmeter (HPS)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use the grinder

ASHRAE BN-97-16-1997 Symposium on Field Methods for Analyzing Equipment@ Building@ and Facility Energy Use

Standard Association of Australia （SAA）, How to use the grinder

AS 2001.2.25.1:2006 Methods of test for textiles - Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Martindale abrasion testing apparatus

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, How to use the grinder

ITU-T P.808-2018 Subjective evaluation of speech quality with a crowdsourcing approach (Study Group 12)
SERIES Z SUPP 1-2015 ITU-T Z.100-series - SDL+ methodology: Use of ITU System Design Languages (Study Group 17)

ETSI - European Telecommunications Standards Institute, How to use the grinder

TR 102 105-1999 Methods for Testing and Specification (MTS); Methodological Approach to the Use of Object-Orientation within the Standards Making Process; Initial Study (V1.1.1)
ETR 008-1990 Network Aspects (NA); the Method for the Characterisation of the Machine-Machine Interfaces Utilised by a Telecommunications Management Network (TMN)
TR 101 941-2001 Access and Terminals (AT); Study of the Implications of Standardization of IP Terminals Utilizing Ethernet@ PSTN and ISDN Connection Methods (V1.1.1)

AT-ON, How to use the grinder

ONORM ENV 1071-2-1993 Advanced technical ceramics. Methods of test for ceramic coatings. Part 2: Determination of coating thickness by the cap grinding method
ONORM L 5233-1998 Agricultural vehicles and seif propelled machines used in mountainous regions - Parking brake - Test methods

International Telecommunication Union (ITU), How to use the grinder

ITU-T P.1312-2016 Method for the measurement of the communication effectiveness of multiparty telemeetings using task performance (Study Group 12)
ITU-T J.147 SPANISH-2002 Objective picture quality measurement method by use of in-service test signals
ITU-T Y.120 ANNEX A SPANISH-1999 Global information infrastructure scenario methodology Annex A: Examples of use
ITU-T P.502 NOTE-2001 Objective test methods for speech communication systems using complex test signals (Study Group 12)
ITU-T P.502 NOTE FRENCH-2001 Objective test methods for speech communication systems using complex test signals
ITU-T P.502 NOTE SPANISH-2001 Objective test methods for speech communication systems using complex test signals
ITU-T K.19 FRENCH-1988 JOINT USE OF TRENCHES AND TUNNELS FOR TELECOMMUNICATION AND POWER CABLES Study Group V
ITU-T K.19 SPANISH-1988 JOINT USE OF TRENCHES AND TUNNELS FOR TELECOMMUNICATION AND POWER CABLES Study Group V

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to use the grinder

PREN 3475-511-1994 Aerospace Series Electrical Cables for Aircrafts Use Test Methods Part 511: Cable-to-Cable Abrasion
PREN 3475-503-1992 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 503 - Scrape Abrasion (Issue P 1)
PREN 3475-511-1997 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 511: Cable-to-Cable Abrasion (Edition P 1)

PT-IPQ, How to use the grinder

NP 3064-1988 Fire protection Portable fire extinguishers use

IN-BIS, How to use the grinder

IS 13863-1993 Cereals and milled cereal products. Determination of the viscosity of flour. Method using an amylograph

HU-MSZT, How to use the grinder

MSZ 8880/2.lap-1963

VN-TCVN, How to use the grinder

TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use

API - American Petroleum Institute, How to use the grinder

API PUBL 32-32502-1982 A UNIFIED APPROACH TO THE USE OF HUMAN CLINICAL DATA: CASE STUDY OF NITROGEN DIOXIDE AND SULFUR DIOXIDE

JSAE - Society of Automotive Engineers of Japan@ Inc., How to use the grinder

JASO E004-1992 Sampling Method of Automobile Exhaust Gas Using a Constant Volume Sampler (CVS)

European Telecommunications Standards Institute (ETSI), How to use the grinder

ETSI TR 102 105-1999 Methods for Testing and Specification (MTS); Methodological Approach to the Use of Object-Orientation within the Standards Making Process; Initial Study (V1.1.1)
ETSI ETR 008-1990 Network Aspects (NA); the Method for the Characterisation of the Machine-Machine Interfaces Utilised by a Telecommunications Management Network (TMN)

国家市场监督管理总局、中国国家标准化管理委员会, How to use the grinder

GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments

The American Road & Transportation Builders Association, How to use the grinder

AASHTO TP58-1999 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus 2000 Edition

GM North America, How to use the grinder

GM GMN4709-2000 Test Method for Determining Material Abrasion Resistance when Used with the Passive Occupant Detection System-A Surface (PODS-A)

Indonesia Standards, How to use the grinder

SNI 03-0450-1989 Test method for reactive alkaline properties of cement with concrete aggregates using stirring rod.

YU-JUS, How to use the grinder

JUS N.N6.373-1987 Radiocommunicaions .Methods of measurement for television transmitters and transposers employing insertino Test signals.Filters use in measurement

European Association of Aerospace Industries, How to use the grinder

AECMA PREN 3475-511-1994 Aerospace Series Electrical Cables for Aircrafts Use Test Methods Part 511: Cable-to-Cable Abrasion
AECMA PREN 3475-511-1997 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 511: Cable-to-Cable Abrasion Edition P 1

CEN - European Committee for Standardization, How to use the grinder

EN 14974:2019 Skateparks - Safety requirements and test methods

BELST, How to use the grinder

STB 8076-2021 System for ensuring the uniformity of measurements of the Republic of Belarus. Ultrasonic transducers with concave longitudinally lapped working surface. Methods of verification

PL-PKN, How to use the grinder

PN B13018-1992 Laboratory glassware. Volumetric glassware. Methods for use and testing of capacity