ZH
RU
ES

Concentrator usage method

Concentrator usage method, Total:499 items.

In the international standard classification, Concentrator usage method involves: Air quality, Fertilizers, Water quality, Protection against fire, Waxes, bituminous materials and other petroleum products, Construction materials, Photography, Meat, meat products and other animal produce, Medical equipment, Inorganic chemicals, Installations in buildings, Analytical chemistry, Geology. Meteorology. Hydrology, Raw materials for rubber and plastics, Laboratory medicine, Radiation measurements, Nuclear energy engineering, Products of the chemical industry, Construction industry, On-board equipment and instruments, Aerospace electric equipment and systems, Ventilators. Fans. Air-conditioners, Paints and varnishes, Sterilization and disinfection, Organic chemicals, Explosion protection, Wood-based panels, Home textiles. Linen, Non-metalliferous minerals, Optoelectronics. Laser equipment, Linear and angular measurements, Graphic technology, Continuous handling equipment, Aids for disabled or handicapped persons, Fuels, Protection against dangerous goods, Footwear, Plastics, Natural gas, Wood, sawlogs and sawn timber, Products of the textile industry, Optics and optical measurements, Protection of and in buildings, Sensory analysis, Clothes, Earthworks. Excavations. Foundation construction. Underground works, Ceramics, Thermodynamics and temperature measurements, Test conditions and procedures in general, Mechanical testing, Measurement of volume, mass, density, viscosity, Semiconducting materials, Electrical accessories, Glass, Vocabularies, Alarm and warning systems, Semiconductor devices, Vibrations, shock and vibration measurements, Petroleum products in general, Road engineering, Soil quality. Pedology, Beverages, Acoustics and acoustic measurements, Shipbuilding and marine structures in general, Rubber, Protective equipment, Applications of information technology, Lubricants, industrial oils and related products, Fluid storage devices, Kitchen equipment, Burners. Boilers, Solar energy engineering.

Association Francaise de Normalisation, Concentrator usage method

NF M60-816*NF EN ISO 9697:2019 Water quality - Gross beta activity - Test method using thick source
NF M60-815*NF EN ISO 9696:2017 Water quality - Gross alpha activity - Test method using thick source
NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
NF U42-467*NF EN 17042:2018 Fertilizers - Determination of boron in concentrations > or 10 % using acidimetric titration
NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs
NF ISO 13271:2012 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des hautes concentrations à l'aide des impacteurs virtuels
NF T90-144*NF EN ISO 12846:2012 Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment.
NF EN 16339:2013 Air ambiant - Méthode pour la détermination de la concentration du dioxyde d'azote au moyen d'échantillonneurs par diffusion
XP P92-021*XP ISO/TS 19021:2019 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
XP U42-469*XP CEN/TS 17060:2018 Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline
NF E09-502:1988 Cleaning appliances using chlorinated and chloro-fluorinated solvents - Measurement method of solvent vapour concentration at opening plan of the appliance - Static functionning without charging
NF M60-773*NF EN ISO 16641:2016 Measurement of radioactivity in the environment - Air - Radon 220 : integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
FD CEN/TR 16013-3:2012 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 3 : évaluation des concentrations de particules en suspension dans l'air à l'aide de photomètres
XP X43-305:2005 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration en protoxyde d'azote (N20) à l'émission au moyen d'une méthode infra-rouge non dispersive - Méthode automatique
FD X43-711-3*FD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3 : evaluation of airborne particle concentrations using photometers
NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
NF ISO 11564:2000 Émissions de sources fixes - Détermination de la concentration en masse des oxydes d'azote - Méthode photométrique à la naphtyléthylène diamine (NEDA)
NF X43-060-3*NF EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3 : guide to selection, use and maintenance.
NF X43-710:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Part 1 : measurement at low concentrations by use of impactors.
NF X43-028*NF EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
NF U42-468*NF EN 17043:2018 Fertilizers - Determination of molybdenum in concentrations = 10 % using spectrometry of a complex with ammonium thiocyanate
NF ISO 8760:1990 Air des lieux de travail - Détermination de la concentration en masse du monoxyde de carbone - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
NF ISO 8761:1990 Air des lieux de travail - Détermination de la concentration en masse du dioxyde d'azote - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
NF X43-064*NF EN 14625:2013 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
NF EN 13528-3:2004 Qualité de l'air ambiant - Échantillonneurs par diffusion pour la détermination de la concentration des gaz et vapeurs - Exigences et méthodes d'essai - Partie 3 : guide pour la sélection, l'utilisation et la maintenance
NF U42-466*NF EN 17041:2018 Fertilizers - Determination of boron in concentrations less than or equal to 10 % using spectrometry with azomethine-H
NF M60-773:2014 Measurement of radioactivity in the environment - Air - Radon 220 : integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
NF X43-029-3*NF EN 14662-3:2015 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography
NF X43-255*NF ISO 8761:1990 Work-place air. Determination of mass concentration nitrogen dioxide. Method using detector tubes for short-term sampling with direct indication.
NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
FD CEN/TR 16013-2:2010 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 2 : évaluation des concentrations de particules en suspension dans l'air à l'aide de compteurs optiques de particules
FD X43-711-2*FD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2 : evaluating airborne particle concentrations using Optical Particle Counters
NF X43-560*NF EN 15549:2008 Air quality - Standard method for the measurement of the concentration of Benzo[a]pyrene in ambient air
NF X43-254*NF ISO 8760:1990 Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication.
NF M60-763-4*NF ISO 11665-4:2021 Measurement of radioactivity in the environment - Air : radon-222 - Part 4 : integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
NF B35-511:1983 Laboratory glassware. Density hydrometers for general purpose. Specifications. Test methods and use.
NF EN 14626:2012 Air ambiant - Méthode normalisée de mesurage de la concentration en monoxyde de carbone par spectroscopie à rayonnement infrarouge non dispersif
NF EN 13528-2:2003 Qualité de l'air ambiant - Échantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Exigences et méthodes d'essai - Partie 2 : exigences spécifiques et méthodes d'essai
NF X43-328*NF EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
NF X43-062*NF EN 14212:2013 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
NF C23-676*NF EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods
NF EN IEC 60749-37:2022 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 37 : Méthode d'essai de chute au niveau de la carte avec utilisation d'un accéléromètre
NF X43-223*NF EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters
NF EN 16897:2017 Exposition sur les lieux de travail - Caractérisation des aérosols ultrafins/nanoaérosols - Détermination de la concentration en nombre à l'aide de compteurs de particules à condensation
NF EN 13528-1:2003 Qualité de l'air - Echantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Prescriptions et méthodes d'essai - Partie 1: prescriptions générales
NF S66-402:2011 Flame arresters - Performance requirements, test methods and limits for use.
NF S66-402*NF EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use
NF EN ISO 16852:2017 Arrête-flammes - Exigences de performance, méthodes d'essai et limites d'utilisation
NF T43-005:1991 Non vulcanized rubber. Methods using a shearing disk viscometer.
NF E09-081-8*NF EN 1093-8+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8 : pollutant concentration parameter, test bench method
NF S76-020-13*NF ISO 16900-13:2016 Respiratory protective devices - Methods of test and test equipment - Part 13 : RPD using regenerated breathable gas and special application minig escape RPD : Consolidated test for gas concetration, tempature, humidity, work of breathing, breathing resis
NF B35-309:1983 Laboratory glassware - Volumetric glassware - Methods for testing and use
NF EN 50676:2019 Appareils électriques utilisés pour la détection et la mesure de la concentration de gaz frigorigènes - Exigences de performance et méthodes d'essai
NF M60-766:2012 Measurement of radioactivity in the environment - Air : radon-222 - Part 4 : integrated measurement method for determining average activity concentration using passive sampling and delayed analysis.
NF M60-766:2020 Measurement of radioactivity in the environment - Air : radon-222 - Part 4 : Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
NF ISO 18869:2020 Transmissions hydrauliques - Méthodes d'essai pour les raccords actionnés avec ou sans outils
NF E32-131:1982 Steam generators. Conventional assessment of wall loss in operation.

CH-SNV, Concentrator usage method

SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
SNV 24526-1944
VSM 18703.1-1969

PL-PKN, Concentrator usage method

PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers

German Institute for Standardization, Concentrator usage method

DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
DIN EN ISO 9696:2018 Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017)
DIN EN 17042:2018-08 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration; German version EN 17042:2018
DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
DIN EN ISO 9697:2016 Water quality - Gross beta activity in non-saline water - Test method using thick source (ISO 9697:2015); German and English version FprEN ISO 9697:2015
DIN CEN/TS 17060:2017-07*DIN SPEC 10057:2017-07 Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline; German version CEN/TS 17060:2017
DIN EN ISO 9697:2020-12 Water quality - Gross beta activity - Test method using thick source (ISO 9697:2018); German version EN ISO 9697:2019
DIN EN ISO 9696:2018-04 Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017); German version EN ISO 9696:2017
DIN EN ISO 25139:2011-08 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011); German version EN ISO 25139:2011
DIN EN 17042:2018 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration; German version EN 17042:2018
DIN EN 17041:2018 Fertilizers - Determination of boron in concentrations 10 % using spectrometry with azomethine-H
DIN 33899-3:2014-09 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN EN ISO 25140:2010-12 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010
DIN 58932-5:2007 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
DIN ISO 16641:2015 Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors (ISO 16641:2014)
DIN EN 17043:2018 Fertilizers - Determination of molybdenum in concentrations 10 % using spectrometry of a complex with ammonium thiocyanate
DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN 12791-3:1983-06 Laboratory glassware; density hydrometers; use and test methods
DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN 33899-3:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN EN 14625:2012 Ambient air.Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German version EN 14625:2012
DIN EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
DIN EN 14412:2004-12 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN 18873-14:2014-09 Methods for measuring of the energy use from equipment for commercial kitchens - Part 14: Point of use water dispenser for cooling and carbon dioxide enrichment
DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN EN 13528-2:2002-12 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods; German version EN 13528-2:2002
DIN EN IEC 60749-37:2023-02 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 47/2651/CDV:2020); German and English version prEN IEC 60749-37:2020 / Note: Date of issue 2023-01-20*Intended as replaceme...
DIN 50159-1:2022 Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN EN 13528-3:2004-04 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
DIN EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters
DIN EN 16897:2017-09 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters; German version EN 16897:2017
DIN 11088:2016-05 Alpine ski bindings - Selection of torque values with the tibia-width method / Note: DIN ISO 8061 (2007-04) and DIN ISO 11088 (2013-10) remain valid alongside this standard until 2016-10-31.
DIN 50933:1987 Measurement of coating thickness by differential measurement using a stylus instrument
DIN EN 14662-3:2016-02 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2015
DIN EN 13528-1:2002-12 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements; German version EN 13528-1:2002

ES-UNE, Concentrator usage method

UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
UNE-EN ISO 9697:2019 Water quality - Gross beta activity - Test method using thick source (ISO 9697:2018) (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN ISO 9696:2018 Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017)
UNE-EN 17041:2019 Fertilizers - Determination of boron in concentrations = 10 % using spectrometry with azomethine-H
UNE-EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
UNE-EN 17043:2019 Fertilizers - Determination of molybdenum in concentrations = 10 % using spectrometry of a complex with ammonium thiocyanate
UNE-EN ISO 16641:2016 Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors (ISO 16641:2014)
UNE-EN IEC 60749-37:2022 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (Endorsed by Asociación Española de Normalización in January of 2023.)
UNE-EN 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods -- Part 37: Board level drop test method using an accelerometer (Endorsed by AENOR in July of 2008.)
UNE-EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters (Endorsed by Asociación Española de Normalización in October of 2017.)
UNE-EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
UNE-EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods (Endorsed by Asociación Española de Normalización in February of 2020.)

British Standards Institution (BSI), Concentrator usage method

BS EN 17346:2020 Ambient air. Standard method for the determination of the concentration of ammonia using diffusive samplers
BS EN 17042:2018 Fertilizers. Determination of boron in concentrations > 10 % using acidimetric titration
BS EN 17041:2018 Fertilizers. Determination of boron in concentrations ≤ 10 % using spectrometry with azomethine-H
BS ISO 19043:2015 Natural rubber latex concentrate. Determination of total phosphate content by spectrophotometric method
BS EN 17043:2018 Fertilizers. Determination of molybdenum in concentrations ≤ 10 % using spectrometry of a complex with ammonium thiocyanate
16/30287218 DC BS ISO 19021. Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
BS EN 14625:2012 Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN 14662-3:2015 Tracked Changes. Ambient air. Standard method for the measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography
BS EN 1093-8:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method
BS EN 1093-8+A1:1999 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Pollutant concentration parameter, test bench method
BS EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS EN ISO 16641:2016 Measurement of radioactivity in the environment. Air. Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS 4522:1988 Method for determination of absolute density at 20 °C of liquid chemical products for industrial use
BS EN ISO 25139:2011 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
BS EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS EN 13528-3:2003(2008) Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS PD CEN/TR 16013-2:2010 Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
BS EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air
BS 7334-2:1990 Measuring instruments for building construction - Methods for determining accuracy in use: measuring tapes
BS EN 14212:2012 Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 14212:2012(2014) Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
BS 7034-4:1989 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS EN 16897:2017 Workplace exposure. Characterization of ultrafine aerosols/nanoaerosols. Determination of number concentration using condensation particle counters
BS EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
22/30450999 DC BS EN 14626. Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
BS EN 14212:2005 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN IEC 60749-37:2022 Tracked Changes. Semiconductor devices. Mechanical and climatic test methods. Board level drop test method using an accelerometer
BS 6905:1987 Method for estimation of concentration of disinfectants used in 'dirty' conditions in hospitals by the modified Kelsey-Sykes test
BS 4140-24:1987 Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves)
BS EN ISO 16852:2010 Flame arresters. Performance requirements, test methods and limits for use
BS EN ISO 10703:2015 Water quality. Determination of the activity concentration of radionuclides. Method by high resolution gamma-ray spectrometry
BS EN 14211:2012 Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
BS EN ISO 10703:2021 Water quality. Gamma-ray emitting radionuclides. Test method using high resolution gamma-ray spectrometry
BS EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases. Performance requirements and test methods
BS 6696:1986 Methods for use and testing of capacity of volumetric glassware
BS EN 3841-306:2005 Aerospace series - Circuit breakers - Test methods - Service life
BS EN 3841-306:2004 Circuit breakers-Test methods-Part 306:Service life
BS ISO 23907-2:2019 Sharps injury protection. Requirements and test methods - Reusable sharps containers

CEN - European Committee for Standardization, Concentrator usage method

PREN 17042-2016 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration
EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
PREN 16897-2015 Workplace exposure - Characterization of ultrafine aerosols anoaerosols - Determination of number concentration using condensation particle counters
EN 14211:2005 Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence

Danish Standards Foundation, Concentrator usage method

DS/EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
DS/EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
DS/EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
DS/CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DS/EN 14212:2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
DS/EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
DS/EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
DS/CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
DS/EN 14211:2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
DS/EN 13528-2:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods
DS/EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
DS/EN 13356:2002 Visibility accessories for non-professional use - Test methods and requirements
DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
DS/EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements

RU-GOST R, Concentrator usage method

GOST R ISO 13271-2016 Stationary source emissions. Determination of PM/PM mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
GOST 18165-1989 Drinking water. Method for determination of aluminium mass concentration
GOST 4152-1989 Drinking water. Method for determination of arsenic mass concentration
GOST 25183.9-1982 Photographic gelatine. Method of determination of hydrogen ions concentration
GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
GOST R ISO 25139-2015 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
GOST R 59740-2021 Optics and photonics. Semiconductor lasers for the determination of low concentrations of substances. Methods for measuring characteristics
GOST ISO 8637-2012 Haemodialysers, haemofiltres and haemoconcentrators. Technical requirements and test methods
GOST 33587-2015 Activated carbon. Standard method for determination of adsorptive capacity for adsorbates at trace concentrations
GOST 33111-2014 Engine oils. Method for determination of apparent viscosity at temperatures between - 5 °C and - 35 °C using the cold-cranking simulator
GOST 22690-2015 Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST R 59594-2021 Soils. Field test methods with the use of resistivity cone penetration
GOST R 51427-1999 Citrus juices. Method for determination of hesperidin and naringin mass concentration using high performance liquid chromatography
GOST 30201-1994 Textile materials for filtration of industrial aerosols. Method of determination of the dust mass concentration behind filter
GOST 26378.3-2015 Used petroleum products. Method for determination of relative viscosity
GOST 30587-1998 Electrically operated household food preparation appliances. Measuring methods of operating characteristics
GOST 31851-2012 Industrial gas-using equipment. Air heaters. Test methods

AENOR, Concentrator usage method

UNE-EN ISO 9697:2017 Water quality - Gross beta activity in non-saline water - Test method using thick source (ISO 9697:2015)
UNE-EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)
UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
UNE-EN 14625:2013 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
UNE-EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
UNE-EN 14212:2013 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
UNE-EN 14412:2005 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
UNE-EN 14211:2013 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
UNE-EN 13528-2:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods
UNE 400311-2:1998 LABORATORY GLASSWARE. DENSITY HYDROMETERS FOR GENERAL PURPOSES. PART 2: TEST METHODS AND USE.
UNE-EN 13356:2001 Visibility accessories for non-professional use - Test methods and requirements.
UNE-EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements

European Committee for Standardization (CEN), Concentrator usage method

CEN/TS 17060:2017 Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline
EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
PD CEN/TS 17060:2017 Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8- hydroxyquinoline
EN 17043:2018 Fertilizers - Determination of molybdenum in concentrations ��10 % using spectrometry of a complex with ammonium thiocyanate
EN 3745-601:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density
EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method
CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
prEN 14212 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
EN 1015-4:1998 Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration)
EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
PD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
prEN 14211 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
EN 16897:2017 Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters
EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
EN 14211:2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods

Japanese Industrial Standards Committee (JISC), Concentrator usage method

JIS A 1306:1983 Measuring method of smoke density using light extinction method
JIS H 0615:1996 Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy
JIS S 2075:2011 Measurement method of efficiency for domestic gas and oil water heater under standard usage mode
JIS L 0889:2014 Test method for colour fastness to laundering with oxygen bleach
JIS Z 8736-3:2006 Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 3: Precision method for measurement by scanning
JIS B 9946:2011 Ozone treatment apparatus for waste and water in industry and other oxidation uses.Specifications of apparatus and measurement methods for ozone concentration

Korean Agency for Technology and Standards (KATS), Concentrator usage method

KS I ISO 23210:2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
KS I ISO 23210:2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 13271:2014 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 25139-2013(2018) Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
KS I ISO 25140:2012 Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS P ISO 17190-9:2011 Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 9：Gravimetric determination of density
KS T 1348-2011 Transport packaging-General specifications for testing
KS M 3061-2008(2013) Testing method for stiffness of plastics by means of a cantilever beam
KS I ISO 25139:2013 Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
KS B ISO 8573-8:2005 Compressed air-Part 8:Test methods for solid particle content by mass concentration
KS B ISO 8573-8:2013 Compressed air－Part 8：Test methods for solid particle content by mass concentration
KS B 7300-2021 Test method of high precision reducer for robot
KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS D 0078-2008(2018) Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy
KS D ISO 14237:2003 Surface chemical analysis－Secondary-ion mass spectrometry－Determination of boron atomic concentration in silicon using uniformly doped materials
KS F 2392-2014 Standard test method for viscosity determination of asphalt binder using rotational viscometer
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS P 1101-2010 Guidance for selection, use and maintenance of respiratory protective devices

KR-KS, Concentrator usage method

KS I ISO 23210-2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS B ISO 16063-42-2017 Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with high accuracy using acceleration of gravity

Lithuanian Standards Office , Concentrator usage method

LST EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)
LST EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
LST EN 14625-2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
LST EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
LST EN 13528-3-2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
LST EN 14212-2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
LST EN 14662-3-2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
LST EN 14412-2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
LST EN 13526-2002 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method
LST EN 14211-2012 Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
LST EN 13528-2-2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods
LST EN 12619-2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
LST EN 13356-2002 Visibility accessories for non-professional use - Test methods and requirements
LST EN 13528-1-2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements

International Organization for Standardization (ISO), Concentrator usage method

ISO/TS 19021:2018 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
ISO 12846:2012 Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment
ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
ISO 13271:2012/CD Amd 1:2011 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1
ISO 19043:2015 Natural rubber latex concentrate - Determination of total phosphate content by spectrophotometric method
ISO 16641:2014 Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
ISO 649-2:1981 Laboratory glassware; Density hydrometers for general purposes; Part 2 : Test methods and use
ISO 17190-9:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 9: Gravimetric determination of density
ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication
ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO 8573-8:2004 Compressed air - Part 8: Test methods for solid particle content by mass concentration
ISO 16852:2008 Flame arresters - Performance requirements, test methods and limits for use
ISO 16852:2016 Flame arresters - Performance requirements, test methods and limits for use
ISO 4787:1984 Laboratory glassware; Volumetric glassware; Methods for use and testing of capacity
ISO 11665-4:2020 Measurement of radioactivity in the environment — Air: radon-222 — Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
ISO 17190-9:2001/cor 1:2002 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 9: Gravimetric determination of density; Technical Corrigendum 1

VN-TCVN, Concentrator usage method

TCVN 4499-1988 Air in the zone of operration.Method of measuring unhealthy matters concentration using indicator tubes
TCVN 7241-2003 Health care solid waste incinerators.Determination method of dusts concentration in fluegas
TCVN 7244-2003 Health care solid waste incinerators.Determination method of hydrochloric acid concentration (HCI) in fluegas
TCVN 7243-2003 Health care solid waste incinerators.Determination method of hydrofloride acid concentration (HF) in fluegas
TCVN 7242-2003 Health care solid waste incinerators.Determination method of carbon monoxide concentration (CO) in fluegas
TCVN 7246-2003 Health care solid waste incinerator.Determination method of sulfur dioxides (SO2) concentration in fluegas
TCVN 7245-2003 Health care solid waste incinerator.Determination method of nitrogen oxides (NOx) concentration in fluegas
TCVN 5364-1991 Textiles.Method for determination of unevenness by the USTER equipment
TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use

Group Standards of the People's Republic of China, Concentrator usage method

T/ZSA 96.4-2021 Test methods for dialyzer — Part 4:Performance parameters of solute reduction ratio
T/NBPIA 005.4-2021 Test methods for performance parameters of dialyzer Part 4: solute reduction ratio
T/HOMETEX 21-2021 Method for measuring comfort temperature of quilt
T/CIDADS 00004-2020 Cloud computing software product experience measurement model and method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Concentrator usage method

GB/T 6167.2-1985 Methods for testing the performance of dust particle counter--Particle concentration
GB/T 21784.2-2008 Laboratory glassware.Hydrometer for general purpose.Part 2: Test methods and use
GB/T 17430-2015 Estimating the maximum service temperature of thermal insulation
GB/T 16290-1996 Sensory analysis--Methodology--Evaluation of food products by methods using scales
GB/T 17430-1998 Estimating the maximum use temperature of thermal insulation
GB/T 3296-1982 Standard test method for transparency of domestic porcelain ware

American Society for Testing and Materials (ASTM), Concentrator usage method

ASTM E2269-21 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM D4230-83(1996)e1 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM C1514-08(2017) Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM D1122-13 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM E2649-20 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
ASTM C1514-02 Standard Test Method for Measurement of ²³⁵U Fraction using the Enrichment Meter Principle
ASTM D3624-85a(2005) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2005) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2005) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(2010) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2010) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2010) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM D2712-91(2016) Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography
ASTM E1515-07 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM E1333-10 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
ASTM C1625-05 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM C1625-12 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM F875-94(2003)e1 Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(2003) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(2009) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(1998) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-09 Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM D3718-85a(1999) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(1999) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(1999) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM E611-03 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
ASTM D3624-85a(2022) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2022) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85A(2022)e1 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(2015) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2015) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2015) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D8375-22 Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
ASTM D8375-23 Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
ASTM E2079-07 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
ASTM E2330-19 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM E611-92 Test Methods for Low Concentrations of Diethylene Glycol in Ethylene Glycol by Gas Chromatography
ASTM D6756-10(2015) Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D4864-14 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
ASTM C1514-08 Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM E611-08(2015)e1 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
ASTM D198-21a Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D1988-91(2000) Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D198-02e1 Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D198-08 Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D1988-20 Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D198-22a Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D198-14e1 Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D5587-14 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM E1348-90(1996) Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E1348-15e1 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E2269-03 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM E2269-05 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM D4913-00(2011) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM D4913-00(2016) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM D4444-92(2003) Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
ASTM D4444-92(1998)e1 Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
ASTM D4287-00(2019) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D5195-14 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
ASTM E177-08 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM C1855-18 Standard Test Method for Determination of Uranium and Plutonium Concentration in Aqueous Solutions Using Hybrid K-Edge Densitometry and X-Ray Fluorescence
ASTM D7042-16e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D6756-09a Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM E2864-18(2022) Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM F609-05 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM E2269-14 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM D8375-23 Red Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS) (Standard + Redline PDF Bundle)
ASTM E2551-07 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM C1042-99 Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear
ASTM D6347/D6347M-99 Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
ASTM C1343-96(2002) Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
ASTM C1343-96 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-Ray Fluorescence
ASTM D6007-02 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
ASTM D6007-96 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
ASTM D6007-22 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
ASTM D6007-14 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
ASTM F609-96e1 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM F609-96 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
ASTM E2683-09 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM D4402-87(2000)e1 Standard Test Method for Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM E2649-12 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
ASTM D2426-93(2014) Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
ASTM C1343-16 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
ASTM E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM D1200-94(1999) Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM UOP947-96 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method
ASTM D2983-22 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D8526-23 Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient
ASTM D4230-02e1 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D4230-02(2007) Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D4402/D4402M-23 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
ASTM D4230-02(2012) Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D4402/D4402M-15 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
ASTM D5225-14 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM B873-17 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D4575-99 Standard Test Methods for Rubber Deterioration8212;Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM E1125-99 Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
ASTM E1125-16 Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
ASTM E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM E1703/E1703M-95(2005) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

Aerospace, Security and Defence Industries Association of Europe (ASD), Concentrator usage method

ASD-STAN PREN 3475-601-2006 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 601: Smoke Density (Edition P 2)
ASD-STAN PREN 3745-601-2006 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 601: Smoke density (Edition P 1)

Indonesia Standards, Concentrator usage method

SNI 19-7117.10-2005 Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation
SNI 13-4113-1996 Specification and test method of limestone for tin ore concentrate melting
SNI 8069-2014 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
SNI 06-6441-2000 Test methods for viscosity of oil asphalt using Brookfield thermosel apparatus
SNI 2827-2008
SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)

Professional Standard - Electron, Concentrator usage method

SJ/T 10925-1996 Methods for calculation of concentration and modulus of potassium silicate solution for use in electronic industry
SJ/T 10431-1993 Humidity generators and humidity testing methods for humidity sensors

US-FCR, Concentrator usage method

FCR COE CRD-C 53-01-2001 TEST METHOD FOR CONSISTENCY OF NO-SLUMP CONCRETE USING THE MODIFIED VEBE APPARATUS

RO-ASRO, Concentrator usage method

STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS
SR 7184-3-2001 Soil - Determination of density. Pycnometer method using organic solvent

Standard Association of Australia （SAA）, Concentrator usage method

AS 1334.2A:1984 Methods of testing conveyor and elevator belting - Determination of thickness of cover using an optical magnifier
AS/NZS EN 13356:2015
AS ISO 14237:2006 Surface chemical analysis - Secondary-ion mass spectrometry - Determination of boron atomic concentration in silicon using uniformly doped materials
AS 2341.7:1993(R2013)

ES-AENOR, Concentrator usage method

UNE 21-170 Pt.1-3-1990
UNE 103-103-1994 Determination of the liquid limit kof a soil by the casagrande apparatus method

American National Standards Institute （ANSI), Concentrator usage method

ANSI/ASTM F609:1997 Test Method for Using a Horizontal Pull Slipmeter (HPS)
ANSI/ASTM D6057:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
ANSI/ASTM D5931:1998 Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ANSI/ASTM D6059:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
ANSI/ASTM D6056:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy

(U.S.) Ford Automotive Standards, Concentrator usage method

FORD WSS-M99C127-A1-2009 ADDITIVE, CERIUM/IRON BASED FOR USE WITH DIESEL PARTICULATE FILTERS 6.5% CERIUM/IRON CONCENTRATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD FLTM AA 101-04-2000 DETERMINATION OF CARBON GRADIENT USING TEST BARS

IN-BIS, Concentrator usage method

中国轻工总会, Concentrator usage method

ZBY 75016-1989 Test method for stiffness of garments using fusible interlinings
ZBY 75015-1989 Test method for peel strength of garments using adhesive linings

Association of German Mechanical Engineers, Concentrator usage method

VDI 3481 Blatt 4-2007 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)
VDI 2459 Blatt 1-2000 Gaseous emission measurement - Determination of carbon monoxide concentration using flame ionisation detection after reduction to methane

IT-UNI, Concentrator usage method

UNI ISO 11665-4:2021 Measurement of radioactivity in the environment -- Air: radon-222 - Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis

Professional Standard - Textile, Concentrator usage method

FZ/T 80007.1-1999 Test method for peel strength of garments using fusible interlinings

国家市场监督管理总局、中国国家标准化管理委员会, Concentrator usage method

GB/T 38426-2019 Test method for thermal resistance and use temperature of sleeping bags
GB/T 3296-2021 Test method for translucency of daily-use porcelain

TR-TSE, Concentrator usage method

TS 721-1969 PLASTICS METHODS FOR MAINTA1NING CONSTANT RELATIVE HUMIDITY ?N SMALL ENCLOSURES BY MEANS OF AOUEOUS SOLUTIONS

邯郸市, Concentrator usage method

DB1304/T 390-2022 Detection method of mining temperature sensor

Defense Logistics Agency, Concentrator usage method

DLA MS27227 REV B-2007 FLANGE NIPPLE ASSEMBLY 90? ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES
DLA MS27228 REV B-2007 FLANGE ASSEMBLY 90? ADAPTER, HOSE TO TUBE, REUSABLE, HYDRAULIC, FUEL AND OIL LINES
DLA MS27230 REV B-2007 FLANGE ASSEMBLY 45? ADAPTER, HOSE TO TUBE, REUSABLE, FUEL AND OIL LINES

未注明发布机构, Concentrator usage method

BS 1619-1:1962(1999) Re - usable hypodermic syringes for insulin injection — Part 1 : Specification for syringes for use with insulin ofstrengths 20,40 and 80 units per millilitre
BS 7334-2:1990(1999) Measuring instruments for building construction — Part 2 : Methods for determining accuracy in use : Measuring tapes Copyright
ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions

GOSTR, Concentrator usage method

GOST R 58888-2020 Soils. Field test method with the use of cone penetration with temperature measurement

Canadian General Standards Board （CGSB), Concentrator usage method

CGSB 9.0 NO. 4-92-CAN/CGSB-1992 Methodes D'Essai Des Pates Et Du Papier Comportement A La Traction Des Papiers Et Cartons (A L'Aide D'Un Appareil A Vitesse Constante D'Allongement)

Professional Standard - Medicine, Concentrator usage method

YY/T 1146-2016 Measurement methods of illuminance for medical optical instruments
YY 91146-1999 Test method of illumination intensity for medical optical instrument

European Committee for Electrotechnical Standardization（CENELEC）, Concentrator usage method

EN 50676:2019 Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods

PT-IPQ, Concentrator usage method

NP 3064-1988 Fire protection Portable fire extinguishers use

International Electrotechnical Commission (IEC), Concentrator usage method

IEC 60749-37:2022 RLV Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer

Illuminating Engineering Society of North America, Concentrator usage method

IESNA LM-28-2012 Approved Method: IES Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory

Professional Standard - Machinery, Concentrator usage method

JB/T 8842.2-1999 Temperature alarm for internal-combustion engine - Test method
JB/T 51021-1999 Reliability assessment method for square bale baler knotter (internal use)

Professional Standard - Military and Civilian Products, Concentrator usage method

WJ 741-1994 Test method for cleanliness of adhesives used in optical instruments
WJ 744-1994 Test method for tensile strength of adhesives for optical instruments

工业和信息化部, Concentrator usage method

WJ/T 741-2014 Test method for cleanliness of glue used in optical instruments

ECIA - Electronic Components Industry Association, Concentrator usage method

EIA-364-08B-1998 TP-08B Crimp Tensile Strength Test Procedure for Electrical Connectors (FSC 5935; Should Be Used Instead of MIL-STD-1344@ Method 2003.1)

HU-MSZT, Concentrator usage method

AT-ON, Concentrator usage method

ONORM L 5233-1998 Agricultural vehicles and seif propelled machines used in mountainous regions - Parking brake - Test methods

Universal Oil Products Company (UOP), Concentrator usage method

UOP 947-1996 LENGTH AND DIAMETER OF EXTRUDED CATALYST USING A SEMI-AUTOMATED METHOD
UOP 947-2015 Length and Diameter of Extruded Catalyst Using a Semi-Automated Method

BE-NBN, Concentrator usage method

NBN-ISO 8322-8:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 8 : Electronic distance-measuring instruments up to 150 m

The American Road & Transportation Builders Association, Concentrator usage method

AASHTO T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
AASHTO T 316-2013 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer

AASHTO - American Association of State Highway and Transportation Officials, Concentrator usage method

T 316-2011 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2004 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2006 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2013 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
TP48-1997 Standard Test Method for Viscosity Determination of Asphalt Binder Using Rotational Viscometer

AR-IRAM, Concentrator usage method

IRAM OFICLAL 2083-N.I.O.-1947

Liaoning Provincial Standard of the People's Republic of China, Concentrator usage method

DB21/T 3133-2019 Test method for surface temperature of ceramic utensils for daily use

BELST, Concentrator usage method

STB 1874-2008 Water natur, drinking and effluent. Methods of implementation measurements of mass concentration of arsenic by stripping voltammetric analysis on analysers type ТА

CZ-CSN, Concentrator usage method

CSN 27 0140 Cast.5-1986 Cranes and elevating machines Approaches and operating positions

JSAE - Society of Automotive Engineers of Japan@ Inc., Concentrator usage method

JASO E004-1992 Sampling Method of Automobile Exhaust Gas Using a Constant Volume Sampler (CVS)

Professional Standard - Aerospace, Concentrator usage method

QJ 1813-1989 Composite solid propellant slurry viscosity and service life determination method pressure rod falling ball viscometer method