ZH

RU

ES

How to use the steamer

How to use the steamer, Total:404 items.

In the international standard classification, How to use the steamer involves: Components for aerospace construction, Burners. Boilers, Shipbuilding and marine structures in general, Lubricants, industrial oils and related products, Aircraft and space vehicles in general, Plastics, Environmental testing, Measurement of fluid flow, Earthworks. Excavations. Foundation construction. Underground works, Construction materials, Road engineering, Crude petroleum, Sterilization and disinfection, Domestic electrical appliances in general, Waxes, bituminous materials and other petroleum products, Air quality, Analytical chemistry, Rubber and plastics products, Natural gas, Refrigerating technology, Internal combustion engines for road vehicles, Footwear, Clothes, Installations in buildings, Ventilators. Fans. Air-conditioners, Fluid power systems, Products of the chemical industry, Gas and steam turbines. Steam engines, Pipeline components and pipelines, Kitchen equipment, Floor treatment appliances, Measurement of volume, mass, density, viscosity, Petroleum products in general, Fuels, Protective equipment, Packaging materials and accessories, Domestic, commercial and industrial heating appliances, Protection of and in buildings, Farming and forestry, Protection against fire, Explosion protection, Surface treatment and coating, Compressors and pneumatic machines, Fluid storage devices, Water quality, Medical equipment, Aerospace electric equipment and systems, Electricity. Magnetism. Electrical and magnetic measurements, Glass, Construction industry, Textile fibres, Thermodynamics and temperature measurements, Industrial automation systems, Sensory analysis, Measurement of force, weight and pressure, Equipment for the metallurgical industry, Sports equipment and facilities, Linear and angular measurements, Inorganic chemicals, Adhesives, Cans. Tins. Tubes.


American Society for Testing and Materials (ASTM), How to use the steamer

  • ASTM F331-13(2020) Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
  • ASTM F331-13 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
  • ASTM D5800-14 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D3539-87(1996) Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer
  • ASTM F1249-94b Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM F1249-20 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM D4888-06 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4888-06(2011) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D4754-98(2003) Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
  • ASTM D4754-98 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
  • ASTM F2370-15 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
  • ASTM F2370-16 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
  • ASTM F2370-22 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
  • ASTM D4754-11 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
  • ASTM D6375-09 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
  • ASTM F2370-10 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
  • ASTM F1249-13 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM D2892-18 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
  • ASTM D2892-11 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
  • ASTM F609-05 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
  • ASTM D2892-05 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
  • ASTM D2892-10 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
  • ASTM E3323-22 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD)
  • ASTM D5404-03 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
  • ASTM D5404/D5404M-12(2017) Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
  • ASTM F3634-23 Standard Guide for Preparing Weathered Samples of Oil Using a Rotary Evaporator
  • ASTM D5454-93(1999) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D5454-04 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM F1868-17 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
  • ASTM D5454-11(2020) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D4888-06(2015) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM D5800-03 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-03a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM F609-96e1 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
  • ASTM F609-96 Standard Test Method for Using a Horizontal Pull Slipmeter (HPS)
  • ASTM D4888-88(1999) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM E398-20 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
  • ASTM D4888-20 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • ASTM E2321-03 Standard Practice for Use of Test Methods E 96 for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
  • ASTM E123-92 Standard Specification for Apparatus for Determination of Water by Distillation
  • ASTM F331-05 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
  • ASTM D5454-11 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D5454-11e1 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D8446-22 Standard Test Method for Water Vapor Content in Compressed Air Using Electronic Moisture Analyzers
  • ASTM B799-95(2014) Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
  • ASTM E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
  • ASTM D3483-14 Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM D6897-16 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
  • ASTM D6897-09 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
  • ASTM UOP702-09 Impurities in Distilled High Purity Cumene by GC
  • ASTM E1782-03 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
  • ASTM D2462-90(1995) Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM D2462-90(2001) Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM E1782-98 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
  • ASTM E1782-22 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
  • ASTM E1782-14 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
  • ASTM E1782-08 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
  • ASTM D4006-16 Standard Test Method for Water in Crude Oil by Distillation
  • ASTM D3483-05 Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM D3483-83(2005) Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM D3483-83(1999) Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM D3483-14(2022) Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM D3483-05(2009) Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • ASTM D5190-07 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
  • ASTM F1868-14 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
  • ASTM E2314-03(2014) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
  • ASTM F1769-97 Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)
  • ASTM F2298-03 Standard Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell
  • ASTM D5800-18a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-19 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-05 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-00ae1 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-00a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-04a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-04 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-08 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-20 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-19a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM E1719-12(2018) Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
  • ASTM D5800-18 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-14e1 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-14e2 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-15 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5800-15a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM C1263-95 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
  • ASTM F3299-18(2023) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P2O5 Sensor)
  • ASTM F1868-23 Standard Test Method for Thermal Resistance, Evaporative Resistance, and Total Heat Loss Measurements of Clothing Materials Using a Sweating Hot Plate
  • ASTM D5404/D5404M-21 Standard Practice for Recovery of Asphalt Binder from Solution Using the Rotary Evaporator
  • ASTM F3321-19 Standard Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
  • ASTM D2462-90(2008) Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM D5800-21 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D2462-22 Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM D2462-13 Standard Test Method for Moisture in Wool by Distillation With Toluene
  • ASTM D7622-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
  • ASTM D7622-10(2015) Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

Association Francaise de Normalisation, How to use the steamer

  • NF E32-131:1982 Steam generators. Conventional assessment of wall loss in operation.
  • NF EN 12697-3+A1:2018 Mélanges Bitumineux - Méthodes d'essai - Partie 3 : extraction des bitumes à l'évaporateur rotatif
  • NF EN 12697-3/IN1:2018 Mélanges Bitumineux - Méthodes d'essai - Partie 3 : extraction des bitumes à l'évaporateur rotatif
  • NF T51-194*NF EN 16472:2014 Plastics - Method for accelerated photoageing using medium pressure mercury vapour lamps
  • NF EN 16472:2014 Plastiques - Méthode de photovieillissement artificielle accéléré utilisant des lampes à vapeur de mercure à moyenne pression
  • NF EN ISO 15106-1:2005 Plastiques - Film et feuille - Détermination du coefficient de transmission de vapeur d'eau - Partie 1 : méthode utilisant un détecteur d'humidité
  • NF EN 12697-4:2023 Mélanges Bitumineux - Méthodes d'essai - Partie 4 : extraction des bitumes à la colonne à distiller
  • NF EN ISO 15106-3:2005 Plastiques - Film et feuille - Détermination du coefficient de transmission de vapeur d'eau - Partie 3 : méthode utilisant un détecteur électrolytique
  • NF T47-264:1995 Rubber hoses for steam. Test methods.
  • NF S98-051-8*NF EN 868-8:2018 Packaging for terminally sterilized medical devices - Part 8 : re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
  • NF EN 868-8:2018 Emballages des dispositifs médicaux stérilisés au stade terminal - Partie 8 : conteneurs réutilisables de stérilisation pour stérilisateurs à la vapeur d'eau conformes à l'EN 285 - Exigences et méthodes d'essai
  • NF E09-502:1988 Cleaning appliances using chlorinated and chloro-fluorinated solvents - Measurement method of solvent vapour concentration at opening plan of the appliance - Static functionning without charging
  • NF E32-020-5:1991 Insdustrial heating equipments. Safety of steam or superheated steam generators, permanently manned or not. Part 5 : specific requirements for non-pulverized coal-fuelled installations.
  • NF EN ISO 10801:2011 Nanotechnologies - Génération de nanoparticules de métal pour essais de toxicité par inhalation en utilisant la méthode de condensation/évaporation
  • FD ISO/TR 22582:2019 Cosmétiques - Méthodes d'évaporation des extraits et de calcul des indices biologiques - Informations complémentaires à utiliser avec l'ISO 16128-2
  • NF C73-185-5*NF EN IEC 62885-5:2018 Surface cleaning appliances - Part 5 : high pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance
  • NF M07-079-3*NF EN 13016-3:2018 Liquid petroleum products - Vapour pressure - Part 3 : determination of dry vapour pressure equivalent (DVPE) using the triple expansion method
  • NF EN 12921-4/IN1:2009 Machines de nettoyage et de prétraitement de pièces industrielles utilisant des liquides ou des vapeurs - Partie 4 : sécurité des machines utilisant des solvants halogénés
  • NF EN 12921-4+A1:2009 Machines de nettoyage et de prétraitement de pièces industrielles utilisant des liquides ou des vapeurs - Partie 4 : sécurité des machines utilisant des solvants halogénés
  • NF X43-060-3*NF EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3 : guide to selection, use and maintenance.
  • NF EN IEC 62885-5:2018 Appareils de nettoyage des surfaces - Partie 5 : appareils de nettoyage à haute pression et appareils de nettoyage à vapeur à usage domestique et commercial - Méthodes de mesure de l'aptitude à la fonction
  • NF S66-402:2011 Flame arresters - Performance requirements, test methods and limits for use.
  • NF S66-402*NF EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use
  • NF EN ISO 16852:2017 Arrête-flammes - Exigences de performance, méthodes d'essai et limites d'utilisation
  • NF T35-101-4*NF EN 12921-4+A1:2009 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 4 : safety of machines using halogenated solvents
  • NF T35-101-4/IN1*NF EN 12921-4/IN1:2009 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 4 : safety of machines using halogenated solvents
  • NF B35-309:1983 Laboratory glassware - Volumetric glassware - Methods for testing and use
  • NF EN 12921-3+A1:2009 Machines de nettoyage et de prétraitement de pièces industrielles utilisant des liquides ou des vapeurs - Partie 3 : sécurité des machines utilisant des liquides de nettoyage inflammables
  • NF EN 12921-2/IN1:2009 Machines de nettoyage et de pré-traitement de pièces industrielles utilisant des liquides ou des vapeurs - Partie 2 : sécurité des machines utilisant des liquides de nettoyage à base aqueuse
  • NF ISO 18869:2020 Transmissions hydrauliques - Méthodes d'essai pour les raccords actionnés avec ou sans outils
  • NF T35-101-3*NF EN 12921-3+A1:2009 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3 : safety of machines using flammable cleaning liquids.
  • NF T35-101-3/IN1*NF EN 12921-3/IN1:2009 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3 : safety of machines using flammable cleaning liquids
  • NF EN 13528-3:2004 Qualité de l'air ambiant - Échantillonneurs par diffusion pour la détermination de la concentration des gaz et vapeurs - Exigences et méthodes d'essai - Partie 3 : guide pour la sélection, l'utilisation et la maintenance
  • NF C73-209-1:2015 Household electric cooking appliances - Part 1 : ranges, ovens, steam ovens and grills - Methods for measuring performance
  • NF C73-209-1/A1*NF EN IEC 60350-1/A1:2021 Household electric cooking appliances - Part 1 : ranges, ovens, steam ovens and grills - Methods for measuring performance
  • NF EN 16849:2016 Bitumes et liants bitumineux - Détermination de la teneur en eau des émulsions de bitume - Méthode par évaporation à la balance dessiccatrice
  • NF EN 60335-2-50:2006 Appareils électrodomestiques et analogues - Sécurité - Partie 2-50 : règles particulières pour les bains-marie électriques à usage collectif
  • NF EN 60335-2-50/A1:2008 Appareils électrodomestiques et analogues - Sécurité - Partie 2-50 : règles particulières pour les bains-marie électriques à usage collectif
  • NF T47-264*NF EN ISO 4023:2009 Rubber hoses and hose assemblies for steam - Test methods
  • NF S52-401:2010 Facilities for users of roller sports equipment - Safety requirements and test methods.
  • NF S52-401/IN1*NF EN 14974/IN1:2010 Facilities for users of roller sports equipment - Safety requirements and test methods
  • NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
  • NF S98-105:1994 Sterilization of medical devices. Validation and routine control of sterilization by moist heat.

Korean Agency for Technology and Standards (KATS), How to use the steamer

  • KS V 4030-2005 Reverse osmosis type evaporators for marine use
  • KS F 2396-2004 Standard practice for recovery of asphalt from solution using the rotary evaporator
  • KS R 1060-2006 Test code of steam cleaners for automobiles
  • KS T 1348-2011 Transport packaging-General specifications for testing
  • KS I 4019-2017(2022) Test methods of remanufactured vaporizer for LPG automotive
  • KS M ISO 4023:2003 Rubber hoses for steam-Test methods
  • KS F 2396-2014 Standard practice for recovery of asphalt from solution using rotary evaporator
  • KS M 3088-2009 Testing methods for water vapor transmission rate of plastic film and sheeting(instrument method)
  • KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
  • KS P 1101-2010 Guidance for selection, use and maintenance of respiratory protective devices
  • KS F 2508-2007(2017) Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
  • KS B ISO 4787:2007 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
  • KS B ISO 4787:2009 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
  • KS L ISO 4787-2016(2021) Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
  • KS M ISO 4023:2018 Rubber hoses and hose assemblies for steam — Test methods

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use the steamer

  • ASHRAE BN-97-15-1-1997 Proper Application of Modern Steam Humidifiers
  • ASHRAE 143-2015 Method of Test for Rating Indirect Evaporative Coolers
  • ASHRAE 143-2000 Method of Test for Rating Indirect Evaporative Coolers
  • ASHRAE PH-97-11-2-1997 Novel Desiccant Cooling System Using Indirect Evaporative Cooler
  • ASHRAE ST-16-024-2016 Low Evaporator Airflow Detection Using Fan Power for Rooftop Units
  • ASHRAE 133-2015 Method of Testing Direct Evaporative Air Coolers
  • ASHRAE TO-98-19-3-1998 Heat Transfer Characteristics in the U-Bend of a Microfin Tube Evaporator Using R-407-C
  • ASHRAE 64-1995 Methods of Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers
  • ASHRAE 3730-1993 Using Solubility Data for HFC-134A and Ester Lubricant Mixtures to Model an in-Tube Evaporator or Condenser
  • ASHRAE OR-16-C048-2016 Using the Poppe's Mathematical Method to Model the Thermodynamic Behavior of Evaporative Countercurrent Water Cooling Towers to Optimize Operation

United States Navy, How to use the steamer

Indonesia Standards, How to use the steamer

RU-GOST R, How to use the steamer

  • GOST 7934.1-1974 Watch oils and greases. Method for the determination of evaporativity
  • PNST 246-2017 Automobile roads of general use. Petroleum bituminous binding materials. Method for isolation of bituminous binder using a rotary evaporator
  • GOST 33361-2015 Crude oil. Determination of vapor pressure by expansion method
  • GOST 19569-1989 Medical steam sterilizers. General technical requirements and test methods
  • GOST R IEC 60335-2-54-2000 Safety of household and similar electrical appliances. Particular requirements for surface-cleaning appliances employing liquids or steam and test methods
  • GOST 31598-2012 Steam large sterilizers. General technical requirements and test methods
  • GOST ISO 3733-2013 Petroleum products and bituminous materials. Determination of water by distillation
  • GOST 32055-2013 Petroleum products and bituminous materials. Determination of water content by distillation
  • GOST R 51935-2002 Steam large sterilizers. General technical requirements and test methods
  • GOST 26449.0-1985 Stationary distillation desalting units. General requirements for chemical analysis methods at saline water desalination
  • GOST 30587-1998 Electrically operated household food preparation appliances. Measuring methods of operating characteristics
  • GOST 31851-2012 Industrial gas-using equipment. Air heaters. Test methods
  • GOST 28488-1990 Multichannel analyzers as multichannel scalers. Test methods
  • GOST 22340-1989 Medical electrical water stills. General technical requirements and test methods
  • GOST 26449.1-1985 Stationary distillation desalting units. Methods of saline water chemical analysis
  • GOST EN 1431-2013 Bitumens and bituminous binders. Determination of binders and oil distillate by distillation method

British Standards Institution (BSI), How to use the steamer

  • BS EN 16472:2014 Plastics. Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
  • BS ISO 12500-2:2007 Filters for compressed air - Test methods - Oil vapours
  • BS EN 868-8:2009 Packaging for terminally sterilized medical devices - Re-usable sterilization containers for steam sterilizers conforming to EN 285: Requirements and test methods
  • BS EN 868-8:2018 Tracked Changes. Packaging for terminally sterilized medical devices. Re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods
  • BS EN IEC 62885-5:2018 Surface cleaning appliances - High pressure cleaners and steam cleaners for household and commercial use. Methods for measuring performance
  • BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
  • PD ISO/TS 17951-2:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using continuous flow analysis (CFA) with automated in-line distillation
  • 18/30383297 DC BS ISO 21755-2. Motorcycles. Measurement method for evaporative emissions. Part 2. Measurement method by using permeation test procedure
  • BS EN ISO 16852:2010 Flame arresters. Performance requirements, test methods and limits for use
  • PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
  • BS EN 868-8:1999 Packaging materials and systems for medical devices which are to be sterilized - Re-usable sterilization containers for steam sterilizers conforming to EN 285: Requirements and test methods
  • BS EN 60335-2-54:2003 Household and similar electrical appliances - Safety - Particular requirements for surface-cleaning appliances for household use employing liquids or steam
  • BS 6696:1986 Methods for use and testing of capacity of volumetric glassware
  • BS EN 3841-306:2005 Aerospace series - Circuit breakers - Test methods - Service life
  • BS EN 3841-306:2004 Circuit breakers-Test methods-Part 306:Service life
  • BS EN 12921-3:2005 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Safety of machines using flammable cleaning liquids
  • BS ISO 23907-2:2019 Sharps injury protection. Requirements and test methods - Reusable sharps containers
  • BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
  • BS 1252:1992 Specification for domestic solid mineral fuel-fired, free-standing cookers with or without boilers
  • BS 1252:1991 Specification for domestic solid mineral fuel-fired, free-standing cookers with or without boilers
  • BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
  • BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
  • BS EN ISO 4023:2010 Rubber hoses and hose assemblies for steam. Test methods
  • BS EN ISO 4023:2009 Rubber hoses and hose assemblies for steam - Test methods
  • BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
  • BS EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents
  • BS EN 12921-4:2005+A1:2008(2009) Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents
  • 15/30287670 DC BS ISO 17951-2. Water quality. Determination of fluoride using flow analysis (FIA and CFA). Part 2. Method using continuous flow analysis (CFA) with automated in-line distillation
  • BS EN 12921-4:2005 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Safety of machines using halogenated solvents
  • BS EN 14974:2006 Facilities for users of roller sports equipment — Safety requirements and test methods
  • BS EN 14974:2007 Facilities for users of roller sports equipment - Safety requirements and test methods
  • DD 253-2001 Mouthguards for use in sport and recreation. Requirements and test methods
  • BS EN 13240:2001+A2:2004(2008) Roomheaters fired by solid fuel - Requirements and test methods
  • BS EN 13240:2001 Roomheaters fired by solid fuel - Requirements and test methods
  • BS EN 13240:2001+A2:2004 Roomheaters fired by solid fuel - Requirements and test methods
  • BS EN 12874:2001 Flame Arresters - Performance Requirements, Test Methods and Limits for Use
  • BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
  • BS EN 1431:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of recovered binder and oil distillate from bitumen emulsions by distillation
  • BS ISO 21760-1:2019 Adhesives for organic electronic devices. Determination of water vapour transmission rate - Adhesive film preparation methods
  • BS EN 17098-2:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation. Method for film permeability determination using a static technique
  • BS EN 12921-2:2005 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Safety of machines using water based cleaning liquids
  • BS EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods

European Committee for Standardization (CEN), How to use the steamer

  • EN 16472:2014 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
  • EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
  • EN ISO 4023:1995 Rubber Hoses for Steam - Test Methods (ISO 4023:1991)
  • CEN/TR 16710-1:2015 Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines
  • EN 14974:2006 Facilities for users of roller sports equipment - Safety requirements and test methods (Incorporates Amendment A1: 2010)
  • EN 26246:1993 Petroleum Products - Motor Gasoline and Aviation Fuels - Determination of Existent Gum - Jet Evaporation Method (ISO 6246:1981) [Use: IP 131/99]
  • EN 12874:2001 Flame Arresters - Performance Requirements, Test Methods and Limits for Use
  • EN ISO 4023:2009 Rubber hoses and hose assemblies for steam - Test methods (ISO 4023:2009)
  • EN 868-8:2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods

AENOR, How to use the steamer

  • UNE-EN 16472:2015 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
  • UNE-EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • UNE-EN 1076:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
  • UNE-EN 868-8:2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
  • UNE-EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
  • UNE-EN 60350-1:2014 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • UNE-EN 60350-1:2014/A11:2015 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • UNE-EN 12921-2:2005+A1:2009 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
  • UNE-EN 12921-3:2005+A1:2009 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
  • UNE-EN 12921-4:2006+A1:2009 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents

BE-NBN, How to use the steamer

Professional Standard - Medicine, How to use the steamer

  • YY/T 0698.8-2009 Packaging materials for terminally sterilized medical devices—Part 8: Requirements and test methods for reusable sterilization containers for steam sterilizers
  • YY/T 1402-2016 Test method to demonstrate the suitability of the process challenge device(PCD)during steam sterilization

International Organization for Standardization (ISO), How to use the steamer

  • ISO 21755-1:2019 Motorcycles — Measurement method for evaporative emissions — Part 1: SHED test procedure
  • ISO 4023:2009 Rubber hoses and hose assemblies for steam - Test methods
  • ISO 4023:1981 Rubber hoses for steam; Methods of test
  • ISO 16852:2008 Flame arresters - Performance requirements, test methods and limits for use
  • ISO 16852:2016 Flame arresters - Performance requirements, test methods and limits for use
  • ISO 12500-2:2007 Filters for compressed air - Test methods - Part 2: Oil vapours
  • ISO 4787:1984 Laboratory glassware; Volumetric glassware; Methods for use and testing of capacity
  • ISO/TS 17951-2:2016 Water quality - Determination of fluoride using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) with automated in-line distillation
  • ISO/TS 17951-1:2016 Water quality - Determination of fluoride using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
  • ISO 4787:2021 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use
  • ISO 7864:2016 Sterile hypodermic needles for single use - Requirements and test methods

Canadian Standards Association (CSA), How to use the steamer

Danish Standards Foundation, How to use the steamer

  • DS/EN 1076:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
  • DS/EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • DS/EN ISO 4023:1995 Rubber hoses for steam - Test methods
  • DS/EN 868-8:2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
  • DS/ISO 4023:1981 Rubber products. Hoses for steam. Methods of test
  • DS/EN ISO 16852:2010 Flame arresters - Performance requirements, test methods and limits for use
  • DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
  • DS/EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
  • DS/EN 60350-1:2013 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • DS/EN ISO 4023:2010 Rubber hoses and hose assemblies for steam - Test methods
  • DS/EN 12921-2+A1:2009 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
  • DS/EN 12921-3+A1:2009 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
  • DS/EN 12921-4+A1:2009 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents

Lithuanian Standards Office , How to use the steamer

  • LST EN 1076-2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
  • LST EN 838-2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • LST EN 868-8-2009 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
  • LST EN 13528-3-2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
  • LST EN 12921-2-2005+A1-2009 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
  • LST EN 12921-4-2005+A1-2009 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents
  • LST EN 12921-3-2005+A1-2009 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids

German Institute for Standardization, How to use the steamer

  • DIN 18873-1:2012-12 Methods for measuring of the energy use from equipment for commercial kitchens - Part 1: Convection steamers / Note: To be replaced by DIN 18873-1 (2022-10).
  • DIN EN 16472:2014-06 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps; German version EN 16472:2014
  • DIN EN ISO 5817:2014-06 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps; German version EN 16472:2014
  • DIN 18873-1:2022-10 Methods for measuring the energy consumption of commercial kitchen appliances - Part 1: Convection steamers / Note: Date of issue 2022-09-02*Intended as replacement for DIN 18873-1 (2012-12).
  • DIN EN 868-8:2019 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
  • DIN EN 868-8:2019-03 Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods; German version EN 868-8:2018
  • DIN EN ISO 10801:2011-04 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010); German version EN ISO 10801:2010
  • DIN 58950-7:2003 Sterilization - Steam sterilizers for pharmaceutical products - Part 7: Requirements on services and installation
  • DIN EN 16472:2014 Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps; German version EN 16472:2014
  • DIN 58951-2:2003 Sterilization - Steam sterilizers for laboratory use - Part 2: Apparatus requirements, requirements on services and installation
  • DIN 58946-7:2014-01 Sterilization - Steam sterilizers - Part 7: Edificial preconditions, requirements for the services and the operation of steam sterilizers used in health care facilities
  • DIN EN ISO 4023:2010-04 Rubber hoses and hose assemblies for steam - Test methods (ISO 4023:2009); German version EN ISO 4023:2009
  • DIN CEN/TR 16710-1:2017-09*DIN SPEC 33427:2017-09 Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines; German version CEN/TR 16710-1:2015
  • DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
  • DIN EN 13240:2005 Roomheaters fired by solid fuel - Requirements and test methods; German version EN 13240:2001 + A2:2004
  • DIN 12791-3:1983-06 Laboratory glassware; density hydrometers; use and test methods
  • DIN EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
  • DIN EN 12921-2:2010-01 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids; German version EN 12921-2:2005+A1:2008 / Note: Applies in conjunction with DIN EN 12921-1 (200...
  • DIN EN 12921-4:2010-06 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents; German version EN 12921-4:2005+A1:2008 / Note: Applies in conjunction with DIN EN 12921-1 (2005-08).
  • DIN EN 12921-3:2010-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids; German version EN 12921-3:2005+A1:2008 / Note: Applies in conjunction with DIN EN 12921-1 (2005-...

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), How to use the steamer

Canadian General Standards Board (CGSB), How to use the steamer

American National Standards Institute (ANSI), How to use the steamer

GOSTR, How to use the steamer

  • GOST R 59119-2020 Automobile roads of general use. Binding materials petroleum bituminous. Method for isolation of bituminous binder using a rotary evaporator
  • GOST R ISO 12500-2-2009 Filters for compressed air. Test methods. Part 2. Oil vapours

Japanese Industrial Standards Committee (JISC), How to use the steamer

  • JIS S 2075:2011 Measurement method of efficiency for domestic gas and oil water heater under standard usage mode
  • JIS A 1232:2023 Method for obtaining soil samples using the fixed piston sampler
  • JIS K 7129:1992 Testing methods for water vapor transmission rate of plastic film and sheeting (instrument method)

KR-KS, How to use the steamer

  • KS B 6017-1998(2023) Testing methods for steam jet air ejectors
  • KS L ISO 4787-2016 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
  • KS B ISO 4787-2007 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
  • KS C IEC 60350-1-2023 Household electric cooking appliances — Part 1: Ranges, ovens, steam ovens and grills — Methods for measuring performance
  • KS M ISO 4023-2018 Rubber hoses and hose assemblies for steam — Test methods

AT-ON, How to use the steamer

  • ONORM EN 27841-1992 Automatic steam traps - Determination of steam loss -Test methods
  • ONORM L 5233-1998 Agricultural vehicles and seif propelled machines used in mountainous regions - Parking brake - Test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the steamer

  • GB/T 8600-1988 Inspecting method for sterilizing effect of automated autoclave sterilizer
  • GB 8600-1988 Inspecting method for sterilizing effect of automated autoclave sterilizer
  • GB/T 31355-2014 Determination of water vapor transmission rate through dry packages.Modulated infrared sensor
  • GB/T 9740-1988 Chemical reagent--General method for the determination of dry residue after evaporation
  • GB/T 9740-2008 Chemical reagent.General method for the determination of dry residue after evaporation
  • GB/T 30475.2-2013 Filters for compressed air.Test methods.Part 2:oil vapours
  • GB 4706.61-2008 Household and similar electrical appliances.Safety.Particular requirements for surface-cleaning appliances for household use employing liquids or steam
  • GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity
  • GB/T 18443.5-2001 Testing method of cryo-insulation pressure vessels static vaporation rate measurement
  • GB/T 33066-2016(英文版) Fluorinated olefins for refrigerant use—General method for the determination of evaporation residues
  • GB/T 23949-2009 Inorganic chemicals for industrial use.General method for the determination of dry residue after evaporation

JSAE - Society of Automotive Engineers of Japan@ Inc., How to use the steamer

  • JASO Z116-1999 Automobile Air Conditioners - Test Method for Evaporator Cooling Performance
  • JASO E004-1992 Sampling Method of Automobile Exhaust Gas Using a Constant Volume Sampler (CVS)

Group Standards of the People's Republic of China, How to use the steamer

  • T/CAS 666-2022 Technical requirements and test methods for fresh steaming of electric steaming oven for household and similar purposes
  • T/YCXH 1-2016 Method for sensory evaluation of proso millet cooking and eating quality
  • T/GITU 002-2021 Method for performance evaluation of household and similar electrical steam oven
  • T/PJDZ 0005-2017 Method for sensory evaluation of japonica rice varieties cooking and eating quality

Professional Standard - Aviation, How to use the steamer

  • HBm 69-1988 Test method for condenser evaporator performance with forced air flow

Professional Standard - Aerospace, How to use the steamer

  • QJ 2675.4-1994 Performance test methods for low temperature containers daily evaporation rate test
  • QJ 2667-1994 Test method for saturated vapor pressure of grease for vacuum

YU-JUS, How to use the steamer

  • JUS G.S3.106-1991 Rubber.Rubber hoses for steam. Methods of test
  • JUS N.N6.373-1987 Radiocommunicaions .Methods of measurement for television transmitters and transposers employing insertino Test signals.Filters use in measurement

Professional Standard - Petroleum, How to use the steamer

  • SY 5672-1993 Evaluation method of high temperature foaming agent for steam injection
  • SY/T 5672-1993 Evaluation method of high temperature foaming agent for steam injection

国家食品药品监督管理局, How to use the steamer

ES-UNE, How to use the steamer

  • UNE-EN ISO 10801:2010 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method (ISO 10801:2010) (Endorsed by AENOR in February of 2011.)
  • UNE-EN IEC 62885-5:2019 Surface cleaning appliances - Part 5: High pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance
  • UNE-EN ISO 16852:2017 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
  • UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)

PT-IPQ, How to use the steamer

  • NP 3064-1988 Fire protection Portable fire extinguishers use

ES-AENOR, How to use the steamer

  • UNE 103-103-1994 Determination of the liquid limit kof a soil by the casagrande apparatus method

FI-SFS, How to use the steamer

International Electrotechnical Commission (IEC), How to use the steamer

  • IEC 62885-5:2018 Surface cleaning appliances - Part 5: High pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance
  • IEC 60350-1 INT 1:2021 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • IEC 60350-1:2021 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • IEC 60350-1:2011 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • IEC 60350-1:2023 RLV Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • IEC 60350-1:2023 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance

CENELEC - European Committee for Electrotechnical Standardization, How to use the steamer

  • EN IEC 62885-5:2018 Surface cleaning appliances - Part 5: High pressure cleaners and steam cleaners for household and commercial use - Methods for measuring performance

Professional Standard - Light Industry, How to use the steamer

  • QB/T 1927.5-1993 Calculation method of energy balance and thermal efficiency of continuous digester
  • QB/T 4691-2014 Technical requirements and test methods for household and similar portable steam sauna

Professional Standard - Agriculture, How to use the steamer

  • GB 9740-1988 General method for determination of chemical reagent evaporation residue
  • NY 337-1998 Application methods of yield-increasing bacteria

HU-MSZT, How to use the steamer

Military Standard of the People's Republic of China-General Armament Department, How to use the steamer

  • GJB 5009-2001 Leak inspection method for steam generator of submarine nuclear power plant
  • GJB 564.2-1988 Filter absorber performance test method Cyanogen chloride vapor poison protection time
  • GJB 4534-2002 Physiological evaluation methods for personal protective equipment Sweat evaporation and sweating volume

Standard Association of Australia (SAA), How to use the steamer

VN-TCVN, How to use the steamer

  • TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use

Professional Standard - Machinery, How to use the steamer

  • JB/T 51021-1999 Reliability assessment method for square bale baler knotter (internal use)
  • JB/T 11942-2014 The technical conditions and test evaluation method for auto saturated vapor pressure tester-Rader method

Association Standard-China Association for Standardization, How to use the steamer

  • CAS 150-2007 Household Microwave Ovens.Requirements and Testing Methods for the Steaming Function

CZ-CSN, How to use the steamer

SE-SIS, How to use the steamer

  • SIS SS 15 02 14-1992 Petroleum products — Determination of gasoline diluent in used gasoline engine oils by distillation

国家市场监督管理总局、中国国家标准化管理委员会, How to use the steamer

  • GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments
  • GB/T 38051.1-2021 Household electric cooking appliances—Part 1:Ranges, ovens, steam ovens and grills—Methods for measuring performance

European Committee for Electrotechnical Standardization(CENELEC), How to use the steamer

  • EN 60350-1:2013 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
  • EN 60350-1:2016 Household electric cooking appliances - Part 1: Ranges@ ovens@ steam ovens and grills - Methods for measuring Performance
  • EN IEC 60350-1:2023 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance

IT-UNI, How to use the steamer

NZ-SNZ, How to use the steamer

  • AS/NZS 4776.1.2:2008 Liquid-chilling packages using the vapour compression cycle Part 1.2: Method of rating and testing for performance-Testing
  • AS/NZS 4776.1.1:2008 Liquid-chilling packages using the vapour compression cycle Part 1.1: Method of rating and testing for performance-Rating

RO-ASRO, How to use the steamer

ETSI - European Telecommunications Standards Institute, How to use the steamer

  • ETR 008-1990 Network Aspects (NA); the Method for the Characterisation of the Machine-Machine Interfaces Utilised by a Telecommunications Management Network (TMN)

Professional Standard - Electron, How to use the steamer

  • SJ/T 31352-1994 Integrity requirements and inspection and evaluation methods for refrigerator evaporator pipe benders

Professional Standard - Non-ferrous Metal, How to use the steamer

  • YS/T 119.5-2008 Determination and calculation of heat balance of special equipments for alumina production.Part 5: Evaporator

CEN - European Committee for Standardization, How to use the steamer

European Telecommunications Standards Institute (ETSI), How to use the steamer

  • ETSI ETR 008-1990 Network Aspects (NA); the Method for the Characterisation of the Machine-Machine Interfaces Utilised by a Telecommunications Management Network (TMN)

PL-PKN, How to use the steamer

  • PN B13018-1992 Laboratory glassware. Volumetric glassware. Methods for use and testing of capacity

CO-ICONTEC, How to use the steamer





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved