metal carrier

metal carrier, Total:500 items.

In the international standard classification, metal carrier involves: Measurement of fluid flow, Semiconductor devices, Aerospace engines and propulsion systems, Electricity. Magnetism. Electrical and magnetic measurements, Aircraft and space vehicles in general, Heat treatment, Surface treatment and coating, Air quality, Textile fibres, Testing of metals, Chipless working equipment, Capacitors, Switchgear and controlgear, Insulation, Iron and steel products, Electrical wires and cables, Soil quality. Pedology, Lamps and related equipment, Valves, Pipeline components and pipelines, Motor cycles and mopeds, Woodworking equipment, Equipment for processing of minerals, Kitchen equipment, Electrical accessories, Linear and angular measurements, Power transmission and distribution networks, Construction materials, Internal combustion engines, Adhesives, Welding, brazing and soldering, External water conveyance systems, Production of metals, Electrical and electronic testing, Aerospace fluid systems and components, Galvanic cells and batteries, Springs, Inorganic chemicals, Powder metallurgy, Fasteners for aerospace construction, Fasteners, Semiconducting materials, Analytical chemistry, Materials for aerospace construction, Products of non-ferrous metals, Ladders, Cutting tools, Non-ferrous metals, Corrosion of metals, Insulating fluids, Internal combustion engines for road vehicles, Elements of buildings, Electromechanical components for electronic and telecommunications equipment, Cans. Tins. Tubes, Wastes, Protection of and in buildings, Non-destructive testing, Medical equipment, Water quality, Mechanical testing, Components for aerospace construction, Lubricants, industrial oils and related products, Wood-based panels.

Professional Standard - Machinery, metal carrier

JB/T 6844-2015 Metal tube float flowmeter
JB/T 6844-1993 Metal tube float flowmeter
JB/T 8627-2007 Bimetal type thermal over-load relay
JB/T 10181.12-2014 Electric cables.Calculation of the current rating.Part 12: Current rating equations (100% load factor) and calculation of losses.Sheath eddy current loss factors for two circuits in flat formation
JB/T 10181.2-2000 Calculation of the current rating of electric cables.Part 1:Current rating equations(100% load factor) and calculation of losses.Section 2:Sheath eddy current loss factors for two circuits in flat formation
JB/T 5806-2005 Bimetallic thermal overload relay in ships
JB/T 5806-1991 Marine bimetal thermal overload relay
JB/T 10676-2006 Metallized safety film AC motor capacitor
JB/T 10863-2008 Eddy current separator for nonferrous metal
JB/T 9672.1-1999 Metal oxide surge arresters with series gaps for d.c. system
JB/T 11248-2012 Technical norm for convection radiator of composite metal fin tube
JB/T 5889-1991 Technical specification for non-ferrous castings intended to be used in insulators
JB/T 5891-1991 Technical specification for ferrous castings intended to be used in insulators

British Standards Institution (BSI), metal carrier

BS EN 62416:2010 Semiconductor devices - Hot carrier test on MOS transistors
BS EN 13890:2009 Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods
BS EN 13890:2002 Workplace atmospheres - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods
BS ISO 15202-2:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sample preparation
BS ISO 15202-3:2004 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Analysis
BS EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
BS EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non- metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy-current method
BS ISO 7314:2002 Aerospace. Fluid systems. Metal hose assemblies
BS EN ISO 4490:2018 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
BS ISO 17352:2008 Hardmetals - Determination of silicon in cobalt metal powders using graphite-furnace atomic absorption
BS EN ISO 4490:2002 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
BS EN 60384-13:2012 Fixed capacitors for use in electronic equipment. Sectional specification/ Fixed polypropylene film dielectric metal foil d.c. capacitors
BS EN IEC 60384-13:2020 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed polypropylene film dielectric metal foil DC capacitors
BS ISO 4680:2022 Corrosion of metals and alloys. Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures
BS EN ISO 13517:2020 Metallic powders. Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
BS EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Current-carrying capacity tests - Test 5b - Current-temperature derating
BS EN 1664:1998 Prevailing torque type all-metal hexagon nuts with flange
BS EN IEC 60384-16:2019 Fixed capacitors for use in electronic equipment - Sectional specification. Fixed metallized polypropylene film dielectric DC capacitors
BS EN ISO 4490:2014 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
BS EN ISO 4490:2008 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
BS EN 60099-9:2014 Surge arresters. Metal-oxide surge arresters without gaps for HVDC converter stations
PD ISO/TS 5094:2023 Nanotechnologies. Assessment of peroxidase-like activity of metal and metal oxide nanoparticles

National Electrical Manufacturers Association（NEMA), metal carrier

NEMA ANSLG C82.14-2006 Lamp Ballasts Low-Frequency Square Wave Electronic Ballasts -- for Metal Halide Lamps

Association Francaise de Normalisation, metal carrier

NF A03-406:1993 Metal products - Fatigue under variable amplitude loading - The Rainflow method of cycle counting
NF ISO 4782:1991 Fils métalliques pour tamis et tissus métalliques
NF X43-265-3*NF ISO 15202-3:2005 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3 : analysis
NF A91-321:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method.
NF EN ISO 21968:2019 Revêtements métalliques non magnétiques sur des matériaux de base métalliques et non métalliques - Mesurage de l'épaisseur de revêtement - Méthode par courants de Foucault sensible aux variations de phase
NF P37-410:1987 Accessoires de couverture - Chatières à grille métalliques - Spécifications
NF C66-439:1981 Insulators and fittings for overhead lines. Metal fittings. Metal sole-plate (SM).
NF A91-321*NF EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
NF C80-202*NF EN 62416:2010 Semiconductor devices - Hot carrier test on MOS transistors
NF EN 62416:2010 Dispositifs à semiconducteurs - Essai de porteur chaud sur les transistors MOS
NF A95-114*NF EN ISO 13517:2020 Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter)
NF A95-113:2008 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter).
NF A95-113:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
NF A95-113*NF EN ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
NF EN ISO 13517:2020 Poudres métalliques - Détermination du temps d'écoulement au moyen d'un entonnoir calibré (cône d'écoulement de Gustavsson)
NF EN 2379:2018 Série aérospatiale - Fluides pour la mise à l'épreuve des matériaux non métalliques
NF C66-473:1978 Insulators and fittings for overhead lines. Metal fittings. Sealing strengthening metal fitting (RS).
NF A05-130:2015 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria
NF L17-038*NF EN 2379:2018 Aerospace series - Fluids for assessment of non-metallic materials
NF ISO 2726:1996 Outils pour le travail du bois - Rabots métalliques, fers de rabots et contrefers
NF EN 4265:2014 Série aérospatiale - Rotules lisses, métal à métal en acier résistant à la corrosion - Série large - Dimensions et charges - Séries en inches
NF Q64-014:1983 Impressions, encres d'imprimerie et supports - Méthode de détermination de la résistance à la stérilisation des impressions sur supports métalliques.
NF A91-149*NF EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.

United States Navy, metal carrier

NAVY UFGS-05 51 33-2010 METAL LADDERS
NAVY UFGS-05 51 33-2009 METAL LADDERS
NAVY MIL-C-19677 C-1990 CLASP, NECKTIE: METAL; GOLD COLOURED
NAVY MIL-G-16265 F NOTICE 1-1998 GASKETS, METALLIC-FLEXIBLE GRAPHITE AND METALLIC ASBESTOS, SPIRAL WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS)
NAVY MIL-G-16265 F-1993 GASKETS, METALLIC-FLEXIBLE GRAPHITE AND METALLIC ASBESTOS, SPIRAL WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS)
NAVY MIL-STD-1322-718-1969 PALLETIZING DOMESTIC UNIT LOAD TRIGGERING DEVICE, FUZE MK 10 MOD 0 (IN METAL BOX)
NAVY MIL-G-24716 A-1993 GASKETS, METALLIC-FLEXIBLE GRAPHITE, SPIRAL WOUND
NAVY MIL-STD-2198-1990 DESIGN REQUIREMENTS FOR METAL ELECTRICAL BACKPLANE ASSEMBLIES
NAVY MIL-P-15736 D NOTICE 1-1998 POWER SUPPLY, METALLIC RECTIFIER, NAVAL SHIPBOARD
NAVY MIL-P-15736 D (4)-1990 POWER SUPPLY, METALLIC RECTIFIER, NAVAL SHIPBOARD
NAVY MIL-P-15736 D SUPP 1A-1973 POWER SUPPLY, METALLIC RECTIFIER, NAVAL SHIPBOARD
NAVY MIL-P-15736 D-1965 POWER SUPPLY, METALLIC RECTIFIER, NAVAL SHIPBOARD
NAVY MIL-STD-1322-128-1969 PALLETIZING DOMESTIC UNIT LOAD FIN ASSEMBLY, BOMB, AN-M113A1, F/1000 LB BOMB (IN METAL CRATE)

US-FCR, metal carrier

FCR UFGS-05 51 33-2010 METAL LADDERS

CZ-CSN, metal carrier

CSN ON 16 6975-1962 metal lid
CSN 42 0890 Cast.7-1982 Determinatlon of flow rate of metal powders
CSN 73 2037-1985 Loading tests of metal building elements
CSN ON 26 9305-1962 Metal milling tool. Technology Delivery Regulations
CSN ON 04 7343-1966 Technical regulations for metal jets METACO TKM 40
CSN ISO 8496:1994 Metallic materials.Tube.Ring tensile test
CSN ISO 8495:1994 Metallic materials.Tube.Ring expanding test
CSN 22 2952-1966 Metal cutting saw blades. Single-sided hand-operated metal cutting saw blades with conjugate serrations
CSN 22 2953-1966 Two-sided hand-operated metal saw blades with conjugate serrations
CSN ON 04 7361-1967 Metal Jet TPZ 0.5 technical requirements and specifications
CSN 03 8364-1978 Measurmg principles at corrosion prevention of earth placed metallic devices. Intensity and direction currents measuring at metallic devices.
CSN 01 5057-1988 Non-destructive testing. Testing of tubes from non-ferrous metals and alloys by eddy-current method
CSN 77 1021-1988 Hermetically sealed metal round cans. Basic dimensions and unit-load sizes
CSN 42 0611 Cast.5-1986 Chemical analysis of non-ferrous metals. Copper-base bearing metals. Determination of zinc by the atomic absorption method
CSN ON 42 8318-1962 Double hot metal straps and bars. Specifications
CSN 03 8367-1978 Measuring; prineiples at eorrosion prcvention of earlh placcd melallicdevices. Intensily delermination of output (input) enrrent from (to) melallic devices.
CSN 03 8541-1973 Metal coatings. Nickel coatings produced by currentless deposition from a hypophosphite bath
CSN 05 0672-1993 Welding Safety measures for electron beam welding of metals
CSN 42 5805-1987 Heads made of plates. Technical delivery terms
CSN ON 42 1387-1962 Thermal bimetallic tapes and strips. Technology Delivery Regulations

Electronic Components, Assemblies and Materials Association, metal carrier

ECA 377-1970 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application ANSI C83.62-71
ECA 376-1970 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for D.C. Application ANSI C83.61-71
ECA 456-A-1989 Metallized Film Dielectric Capacitors for Alternating Current Application
ECA 277-1949 Designation System for Metal Electron Tube Shells

Society of Automotive Engineers (SAE), metal carrier

SAE AS5833-2006 MALE FERRULE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, SWAGED FSC 4730
SAE AS5839-2006 FEMALE FERRULE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, BUTT WELDED FSC 4730
SAE AS5838-2006 FEMALE FERRULE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, SWAGED FSC 4730
SAE AS5837-2006 MALE FERRULE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, BUTT WELDED FSC 4730
SAE MA2153/1-1991 Clamp, Loop Type, Bare Metal, Aluminum, Metric
SAE J2658-2003 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE MA2153/2-1991 Clamp, Loop Type, Bare Metal, Stainless Steel, Metric
SAE J2551-2001 Recommended Practices for Fluid Conductor Metallic Tubing Applications
SAE ARP618A-2013 Boss Fittings, Metal Seal, Fluid Systems: General Requirements For
SAE MA2152/1-1991 Clamp, Center Mount, Bare Metal, Aluminum, Metric

PL-PKN, metal carrier

PN E05022-1957 Metal high current receiving electrical engineering equipment overload protection device
PN BN 5048-02-1966 Package. Closed. jar metal swivel lid
PN T80009-1989 Electronic components Fixed metallized-paper dielectric capacitors lor direct current General re?uirements and tests
PN BN 5048-01-1966 Package. Closing Feniks jar metal lid
PN BN 5049-02-1967 Metal independent packaging. shoe polish box
PN E93602-1969 Metallic segting glands for conduc?ors in elektrical installa?ions on ships Housings
PN E93601-1969 Melallic sealing glands for conductors in eleclrical inslalla?ions on ships
PN E93607-1969 Me?allic sealing glands for conduc?ors in electrical installalions on ships packings
PN E93606-1969 Melallic sealing glands lor conductors in elec?rical inslollations on ships Washer pads
PN-EN ISO 13517-2020-11 E Metallic powders -- Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
PN E93608-1969 Me?allic sealing glands for conductors in eleclrical installations on ships Plugs

American National Standards Institute （ANSI), metal carrier

ANSI/NEMA C82.14-2016 Lamp Ballasts - Low-Frequency Square Wave Electronic Ballasts - for Metal Halide Lamps
ANSI/EIA 377-1:1972 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application
ANSI/EIA 376:1970 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for DC Application
ANSI/EIA 376-1:1971 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for DC Application
ANSI/AWWA C513-2005 Open-Channel, Fabricated-Metal Slide Gates and Open-Channel, Fabricated-Metal Weir Gates
ANSI/ASTM E855:1990 Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ANSI/ASC A14.2-2017 Ladders - Portable Metal - Safety Requirements
ANSI ASC A14.2-2017 Ladders - Portable Metal - Safety Requirements
ANSI C82.14-2006 Low Frequency Square Wave Ballasts for Metal Halide Lamps
ANSI A14.2-2007 Ladders - Portable Metal - Safety Requirements

NEMA - National Electrical Manufacturers Association, metal carrier

NEMA C82.14-2016 Lamp Ballasts - Low-Frequency Square Wave Electronic Ballasts - for Metal Halide Lamps
NEMA C82.17-2017 Lamp Ballasts - High Frequency (HF) Electronic Ballasts for Metal Halide Lamps
NEMA OS 2-1998 Nonmetallic Outlet Boxes@ Device Boxes@ Covers and Box Supports
NEMA OS 2-2013 Nonmetallic Outlet Boxes@ Device Boxes@ Covers@ and Box Supports
NEMA OS 2-1986 Nonmetallic Outlet Boxes@ Device Boxes@ Covers and Box Supports
NEMA OS 2-2008 Nonmetallic Outlet Boxes@ Device Boxes@ Covers and Box Supports

CU-NC, metal carrier

NC 91-46-1987 Unit Loading and Storing Metallic Pallet-Boxes General Quality Specifications

ES-AENOR, metal carrier

UNE 7-469-1988 Metal materials, metal wire folding AC test

RO-ASRO, metal carrier

STAS 10385-1975 Testing of metals DRIFT EXPANDING TEST ON LIGHT METAL AND LIGHT METAL ALLOY TUBES
STAS 8651-1988 METALLIC POWDERS Rate of flow determination
STAS 8027-1978 Tests of metals AXIAL LOADS FATIGUE TESTING
STAS 6623-1970 Testing of metals VICKERS HARDNESS TEST WITH LIGHT LOADS
STAS 3371/2-1990 Terrestrial surveyings METALLIC PEGS
STAS 5852/2-1986 INDOOR POHCELAIN POST INSULATORS WITII INNER METAL F1TTINGS FOR ELECTRICAL PURPOSES INSUI.ATORS WITHOUT FITTINGS Dimensions
STAS 5852/3-1972 INDOOR PORCELAIN POST INSU- LATORS WITH INNER METAL FITTINGS FOR ELEGTRICAL ENGINEERING PURPOSES Metal fittings
STAS 1485-1973 Schol furniture METAL FRAME CHAIRS
STAS 5555/2-1980 Welding of metals WELD1NG PROCESSES Classilication and terminology
STAS 8094-1968 Metal powder. Determination of mass loss after combustion
STAS 10140-1984 Metal frame furniture TABLE-CHAIR FOR SCHOOL LABORATORIES
STAS 10284-1975 METAL POWDERS COPPER POWDERS Determination of sulphate ion
STAS 10800-1984 Metallic furniture SUPFERPOSABL CHAIR
STAS 1687/3-1982 META1XIC LIDS FOR CYLINDRI- CAL CANS FOR TINS Dimensions
STAS 152-1986 Wood packages CASE FOR METALLIG ASSEMBLING COMPONENTS
STAS 9146-1979 Metal furniture LOCKSMTH'S BENCHES Shapes and dimensions
STAS 1785/3-1973 Indoor post insulators made of porcelan, for electrical engineering purposcs with outer metal fittings METAL FITTINGS

National Metrological Technical Specifications of the People's Republic of China, metal carrier

JJF 1462-2014 Calibration Specification for DC Electronic Loads
JJF 2014-2022 Calibration specification for metal vibrator type rate gyroscope

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, metal carrier

GB/T 29843-2013 General specification for DC electronic load
GB/T 31942-2015 FeCrAl foil for metallic honeycomb substrates
GB 50959-2013 Load code of nonferrous metals engineering structures
GB/T 25704-2010 Overflow ball mill.Specific metal consumption
GB/T 8757-2006 Determination of carrier concentration in gallium arsenide by the plasma resonance minimum
GB/T 31554-2015 Non-magnetic metallic coatings on metallic and non-metallic basismaterials.Measurement of coating thickness.Phase-sensitive eddy-current method
GB/T 22389-2023 Gapless metal oxide arrester for high voltage DC converter station
GB 11032-2010 Metal-oxide surge arresters without gaps for a.c. systems
GB/T 11032-2010 Metal-oxide surge arresters without gaps for a.c. systems
GB 11032-2000 Metal oxide surge arresters without gaps for a.c. systems
GB/T 15616-1995 Qantitative method for electron probe microanalysis of metals and alloys
GB/T 15616-2008 Quantitative method for electron probe microanalysis of metals and alloys
GB/T 27686-2011 The metal scraps in waste electrical and electronic equipment
GB/T 25083-2010 Metal-oxide surge arresters without gaps for ±800kV UHVDC systems
GB/T 1482-2010 Metallic powders.Determination of flow time by means of a calibrated funnel(Hall flowmeter)
GB/T 1482-2022 Metallic powders—Determination of flow rate—Calibrated funnel methods（Hall flowmeter）
GB/T 22389-2008 Guidelines of metal oxide surge arresters without gaps for HVDC converter stations
GB/T 36705-2018 Test method for carrier concentration of gallium nitride substrates—Raman spectrum method
GB/T 14146-1993 Silicon epitaxial layers--Determination of carrier concentration--Mercury probe Valtage-capacitance method
GB/T 11068-2006 Gallium arsenide epitaxial layer.Determination of carrier concentration voltage-capacitance method
GB/T 14146-2009 Silicon epitaxial layers-determination of carrier concentration-mercury probe voltages-capacitance method
GB 11068-1989 GaAs Epitaxial Layer Carrier Concentration Capacitance-Voltage Measurement Method
GB/T 17472-2008 Specification for pastes of precious metal used for microelectronics
GB/T 17472-2022 Specification for pastes of precious metal used for microelectronics
GB/T 31940-2015 Bimetal composite corrosion-resistant steel pipe for fluid transportation
GB 4874-1985 General specification for direct current fixed metallized paper capacitors
GB/T 26697-2011 Low-frequency square wave electronic ballasts for metal halide lamps
GB/T 1553-1997 Standard test methods for minority carrier lifetime in bulk germanium and silicon by measurement of photoconductivity decay
GB/T 1553-2009 Test methods for minority carrier lifetime in bulk germanium and silicon by measurement of photoconduetivity decay
GB/T 1553-2023 Determination of Minority Carrier Lifetime in Silicon and Germanium by Photoconductivity Decay Method

AR-IRAM, metal carrier

IRAM 2166-1962 Metal rectifier. Selenium

RU-GOST R, metal carrier

GOST R 59734-2021 Optics and photonics. Laser surfacing with metal materials. Technological process
GOST R 59736-2021 Optics and photonics. Laser marking of metal products. Technological process
GOST 16438-1970 Sand and metal moulds for making of fluidity of metals tects
GOST 26665-1997 Metal bodies planes. Specification
GOST 26665-1991 Metal bodied planes. Technical specifications
GOST 14311-1985 Steel cord. Specifiucations
GOST 9.313-1989 Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings on the plastics. General requirements and technological operations
GOST 23401-1990 Metal powders. Catalysts and carriers. Determination of specific area
GOST 5981-2011 Tins and metal lids for canned food. Specifications
GOST R 57410-2017 Corrosion protection of metal wares from non-ferrous metal alloys by diffusion treatment with zinc. General requirements to flow process
GOST 18318-1994 Metallic powders. Determination of particle size by dry sieving
GOST 18318-1973 Metal powders. Method of sieve analysis

Taiwan Provincial Standard of the People's Republic of China, metal carrier

CNS 7746-1981 Wire Netting for Packing Partitions in Mines
CNS 9202-1982 Method for Determining Flow Rate of Metal Powders
CNS 11400-1985 Method of Eddy Current Test for Metal Bars Rods and Wires
CNS 4162-1987 Measurement of Thickness of Metallic Coatings by the Jet Test Method

Korean Agency for Technology and Standards (KATS), metal carrier

KS B ISO 1099-2002(2012) Metals－Axial load fatigue testing
KS I ISO 15202-3:2005 Workplace air ― Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry ― Part 3: Analysis
KS C 3822-2004 METAL FITTINGS FOR INSULATORS
KS C 3822-1982 METAL FITTINGS FOR INSULATORS
KS C 8109-2014 Ballasts for metalhalide lamps
KS C 8109-2003 Ballasts for metalhalide lamps
KS C 3822-1998 METAL FITTINGS FOR INSULATORS
KS C 6404-1982(1997) FXIED METALIZED PAPER CAPACITORS FOR DIRECT CURRENT
KS C 6404-1982 FXIED METALIZED PAPER CAPACITORS FOR DIRECT CURRENT
KS G 3223-2003 Knives, forks, spoons, chopstick, ladles for table
KS B ISO 8492-2001(2021) Metallic materials－Tube－Flattening test
KS D ISO 4490:2010 Metallic powders-Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
KS D ISO 4490:2013 Metallic powders－Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
KS W ISO 7314-2009(2014) Aerospace－Fluid systems－Metal hose assemblies
KS C 6425-1985(2000) METALLIZED PLASTIC FILM CAPACITORS FOR AC
KS C 6425-1985 METALLIZED PLASTIC FILM CAPACITORS FOR AC
KS D 0035-2006 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS D 0035-1985 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS B ISO 9974-3-2004(2009) Connections for general use and fluid power－Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing－Part 3：Stud ends with metal-to-metal sealing (type B)
KS D 0265-1989(2019) Measurement of minority carrier life time in germanium by photoconductive decay method
KS W ISO 7314:2009 Aerospace-Fluid systems-Metal hose assemblies
KS C 2212-2002 Metallized polyester film for capacitors
KS W ISO 7314:2016 Aerospace－Fluid systems－Metal hose assemblies
KS D 0035-2011 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS D 0257-2002(2017) Measuring of minority - carrier lifetime in silicon single crystal by photoconductive decay method
KS D 0257-2002(2022) Measuring of minority - carrier lifetime in silicon single crystal by photoconductive decay method
KS B ISO 8525:2020 Airborne noise emitted by machine tools — Operating conditions for metal-cutting machines
KS C 4616-2011(2021) Metal-oxide surge arresters without gaps for a.c. systems
KS C 4616-2011(2016) Metal-oxide surge arresters without gaps for a.c. systems
KS F 4908-1996 PUTTY FOR METAL SASH GLAZING
KS F 4908-1986 PUTTY FOR METAL SASH GLAZING
KS I ISO 15202-1:2006 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 1:Sampling
KS I ISO 15202-1:2014 Workplace air — Determination of metals and metalloids in Workplace air — Determination of metals and metalloids in emission spectrometry — Part 1: Sampling

International Organization for Standardization (ISO), metal carrier

ISO 1099:1975 Metals; Axial load fatigue testing
ISO 15202-3:2004 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis
ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method
ISO 4490:2001 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
ISO 4490:2008 Metallic powders — Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (Fourth Edition)
ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
ISO 4490:1978 Metallic powders; Determination of flowability by means of a calibrated funnel (Hall flowmeter)
ISO 7314:1994 Aerospace — Fluid systems — Hose assembly, metal
ISO 17352:2008 Hardmetals - Determination of silicon in cobalt metal powders using graphite-furnace atomic absorption
ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling

IN-BIS, metal carrier

IS 4066-1967 Specification for metal hooks, clips and rings
IS 4840-1984 Method for determination of metal powder flow rate for powder metallurgy
IS 11612-1984 Operating specifications for eddy current testing of non-ferrous metal seamless pipes
IS 4633-1968 Specification for fixed metallic paper dielectric capacitors for direct current

European Committee for Standardization (CEN), metal carrier

EN 13890:2002 Workplace atmospheres Procedures for measuring metals and metalloids in airborne particles Requirements and test methods
EN 13890:2009 Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods
EN ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phasesensitive eddy-current method
EN ISO 4490:2014 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014)
EN ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
EN ISO 4490:2008 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
EN 4265:2013 Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series

American Society for Testing and Materials (ASTM), metal carrier

ASTM D7035-10 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM E238-84(2002) Standard Test Method for Pin-Type Bearing Test of Metallic Materials
ASTM D1002-10(2019) Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM E566-99 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
ASTM E566-99(2004)e1 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
ASTM D3166-99(2012) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D3166-99(2020) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D2293-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
ASTM B213-03 Standard Test Method for Flow Rate of Metal Powders
ASTM B213-97 Standard Test Method for Flow Rate of Metal Powders
ASTM D2295-96(2002) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D2295-96(2008) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D2294-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM E238-12 Standard Test Method for Pin-Type Bearing Test of Metallic Materials
ASTM F180-94(2010)e1 Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
ASTM F180-94(2015) Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
ASTM E1091-98 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
ASTM E703-98(2004)e1 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals
ASTM E703-98 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals
ASTM D2295-96(2016) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM B213-11 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM F28-91(1997) Standard Test Methods for Minority-Carrier Lifetime in Bulk Germanium and Silicon by Measurement of Photoconductivity Decay
ASTM F106-12(2017) Standard Specification for Brazing Filler Metals for Electron Devices
ASTM F106-06 Standard Specification for Brazing Filler Metals for Electron Devices
ASTM B213-20 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM B213-17 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM B213-13 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM E855-90(2000) Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

Defense Logistics Agency, metal carrier

DLA A-A-50118 B-2000 STRAPS, CRAMPONS
DLA MIL-PRF-83421 D-2006 CAPACITORS, FIXED, METALLIZED, PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA RR-F-191/4 F-2008 FENCING, WIRE AND POST, METAL (CHAIN-LINK FENCE ACCESSORIES)
DLA DSCC-DWG-10010-2010 RESISTOR, CURRENT SENSE, OPEN AIR, METAL ALLOY STRIP, 5 WATTS
DLA DESC-DWG-85034 REV D-2011 HOLDER, ELECTRICAL CARD, METAL, CARD GUIDE
DLA A-A-59832-2009 EXTRACTOR, ELECTRICAL CARD, METAL, GENERAL REQUIREMENTS FOR
DLA A-A-59832 A-2011 EXTRACTOR, ELECTRICAL CARD, METAL, GENERAL REQUIREMENTS FOR
DLA QPL-83421-58-2005 CAPACITORS, FIXED, METALLIZED, PLASTIC FILM DIELECTRIC (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-PRF-83421 E-2010 CAPACITORS, FIXED, METALLIZED, PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA QPL-83421-58 NOTICE 1-2008 CAPACITORS, FIXED, METALLIZED, PLASTIC FILM DIELECTRIC (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA QPL-83421-QPD-2008 CAPACITORS, FIXED, METALLIZED, PLASTIC FILM DIELECTRIC (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA QPL-83421-QPD-2010 CAPACITORS, FIXED, METALLIZED, PLASTIC FILM DIELECTRIC (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-PRF-83421/2 D-2012 CAPACITORS, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES, ESTABLISHED RELIABILITY STYLES CRH11, CRH12, AND CRH13 (INSULATED)
DLA QPL-83421-2012 Capacitors, Fixed, Metallized, Plastic Film Dielectric, (DC, AC, or DC and AC), Hermetically Sealed in Metal Cases or Ceramic Cases, Established Reliability, General Specification for
DLA QPL-18312-43-2005 CAPACITORS, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR

National Aeronautics and Space Administration (NASA), metal carrier

NASA UFGS-12 31 00-2009 MANUFACTURED METAL CASEWORK

Japanese Industrial Standards Committee (JISC), metal carrier

JIS G 3552:1993 Chain link wire netting
JIS C 3703:1995 Metal fittings for insulators
JIS A 5752:1994 Putty for metal sash glazing
JIS H 0604:1995 Measuring of minority-carrier lifetime in silicon single crystal by photoconductive decay method

AENOR, metal carrier

UNE 40142:1974 METALLIC COMBS OF DOUBLE LIGATURE.
UNE 40183:1971 LOOM COMBS. METALLIC COMBS OF SIMPLE BOND.
UNE-EN ISO 21968:2006 Non-magnetic metallic coatings on metallic and non-metallic basis materials. Measurement of coating thickness. Phase sensitive eddy-current method (ISO 21968:2005)
UNE-EN ISO 13517:2014 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2013)
UNE-EN ISO 4490:2015 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2014)
UNE 81587:2017 Workplace exposure. Determination of metals and metalloids in airborne particles. Atomic Spectrometry method.

Professional Standard - Agriculture, metal carrier

NY/T 1613-2008 Soil quality.Analysis of soil heavy metals-atomic absorption spectrometry with aqua regia digestion

German Institute for Standardization, metal carrier

DIN 3543-2:1984 Metallic tapping stop valves; dimensions
DIN EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005); German version EN ISO 21968:2005
DIN EN ISO 21968:2020-02 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019); German version EN ISO 21968:2019
DIN EN 62416:2010-12 Semiconductor devices - Hot carrier test on MOS transistors (IEC 62416:2010); German version EN 62416:2010
DIN 14880:2013-12 Boxes for fire equipment - Boxes made of wood, light metal and light metal/wood
DIN EN ISO 4490:2009 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2008); English version of DIN EN ISO 4490:2009-02
DIN EN ISO 4490:2018-08 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2018); German version EN ISO 4490:2018
DIN 50440:1998 Testing of materials for semiconductor technology - Measurement of carrier lifetime in silicon single crystals - Recombination carrier lifetime at low injection by photoconductivity method
DIN EN ISO 18086:2021-02 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019); German version EN ISO 18086:2020
DIN EN ISO 13517:2020 Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
DIN EN ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2018)
DIN EN ISO 13517:2020-08 Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020); German version EN ISO 13517:2020
DIN EN 2379:2019 Aerospace series - Fluids for assessment of non-metallic materials; German and English version EN 2379:2018
DIN EN 2379:2019-01 Aerospace series - Fluids for assessment of non-metallic materials; German and English version EN 2379:2018
DIN 18168-2:2008-05 Ceiling linings and suspended ceilings with gypsum plasterboards - Part 2: Verification of the load-carrying capacity of metal sub-constructions and metal suspending rods
DIN EN 4265:2013-03 Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series; German and English version EN 4265:2013
DIN 51520:1995 Lubricants - Metalworking fluids - Straight cutting oils (non aqueous fluids) SN; specifications

Indonesia Standards, metal carrier

SNI 07-3382-1994 Constant amplitudo axial fatigue test for metallic materials
SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
SNI 07-4612-1998 Bend tests for metallic material tubes in full section

HU-MSZT, metal carrier

MNOSZ 8152-1953 Cylindrical metal box with lid
MSZ 1979-1976 Six kinds of metal ion wheel stalks
MSZ 15436-1982 Metal powder flow ability testing
MSZ 7943/6-1979 Metal cover with stone structure
MSZ 10074-1970 Metal cutting tools. Flow performance testing
MSZ 5248/1-1979 grinder. Metal grinder connection. overpressure flow
MSZ 1557-1965 Installation instructions for metal electronic equipment
MNOSZ 8153-1953 Cylindrical metal box with push-pull lid
MSZ 5245/1-1979 tub. Water outflow pipe products. made from metal
MNOSZ 5277-1951 Metal storage cabinets. Double-sided border for 10 people
MNOSZ 5096-1956 Large metal cutting machinery. AC grinding wheel with number of teeth
MNOSZ 8398-1956 Metallic paper for DC generator and transformer insulation
MNOSZ 6288-1955 Welding electronic equipment. For welding of cast metals

Professional Standard - Automobile, metal carrier

QC/T 1003-2015 Determination of precious metal in metal support catalytic converter for motorcycles

Group Standards of the People's Republic of China, metal carrier

T/ZZB 2878-2022 Metal seal non-slam axial flow check valves
T/CEC 604-2022 Specifications for insulators used in AC gas-insulated metal-enclosed transmission lines
T/QGCML 2463-2023 Waste power battery metal logistics box
T/CASME 99-2022 Noble metal catalyst support High purity pseudoboehmite
T/GAMA 26-2022 Measurement method of surface crack in metal components using crack opening load ratio
T/CES 193-2023 Technical specification of metallic tube resistor for HVDC converter valve system
T/CNS 47-2021 Test method for metallic ion dissolution rate in high temperature pressurized water of metallic materials used in nuclear power plants
T/CSBM 0011-2021 In Evaluation Method of Metal Ion Release in Medical Titanium Alloy Implants
T/CASAS 026-2023 Test method for minority carrier lifetime in silicon carbide—microwave photoconductive decay
T/SHXCL 0003-2021 Inorganic metal-ion antibacterial and antiviral additives
T/IAWBS 003-2017 Determination of Carrier Concentration in SiC Epitaxial Layer_Mercury Probe Capacitance-Voltage Method
T/CIAPS 0014-2021 On-board Terminal Sealed Nickel-Metal Hydride Rechargeable Battery Requirements for Intelligent Connected Vehicle
T/CNIA 0097-2021 Green Design Product Evaluation Technical Specifications Noble Metal Carbon-Supported Catalysts

Military Standards (MIL-STD), metal carrier

DOD A-A-51724-1986 CARRIER, SUTURE WIRE (RUSH)
DOD A-A-54412-1991 CLAMP, BONE AND PLATE HOLDING, LOWMAN'S MODIFIED

工业和信息化部, metal carrier

JB/T 5806-2018 Marine bimetallic thermal overload relay
QC/T 1075-2017 Technical specifications for metal honeycomb carriers for exhaust catalytic converters

机械电子工业部, metal carrier

JB 5806-1991 Marine bimetallic thermal overload relay
JB 5891-1991 Technical conditions for ferrous metal castings for insulators
JB 5889-1991 Technical conditions for non-ferrous metal castings for insulators

Professional Standard - Aviation, metal carrier

HB 7881-2008 General requirements for direct current power supplies of airborne electronic
HB 5287-1996 Axial loading fatigue test method for metallic materials
HB 5374-1987 Method for measuring galvanic current of different metals
HB 6175-1988 General technical specification for airborne electronic computer DC regulated power supply

国家能源局, metal carrier

NB/T 42105-2016 Pot-type insulators for high-voltage AC gas-insulated metal-enclosed switchgear
NB/T 42153-2018 AC plug-in gapless metal oxide arrester

ECIA - Electronic Components Industry Association, metal carrier

377-1970 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application (ANSI C83.62-71)
277-1949 Designation System for Metal Electron Tube Shells
377-1-1972 "Parts List Supplement to RS-377@ ""Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Applications"""
456-A-1989 Metallized Film Dielectric Capacitors for Alternating Current Application
376-1970 Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for D.C. Application (ANSI C83.61-71)

工业和信息化部/国家能源局, metal carrier

JB/T 12889.2-2016 Diesel exhaust purification catalyst carrier Part 2: Metal carrier

ES-UNE, metal carrier

UNE-EN ISO 21968:2020 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2019)
UNE-EN 62416:2010 Semiconductor devices - Hot carrier test on MOS transistors (Endorsed by AENOR in September of 2010.)
UNE-EN ISO 4490:2018 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2018)
UNE-EN ISO 18086:2022 Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
UNE-EN ISO 13517:2021 Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
UNE-EN 4265:2013 Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series (Endorsed by AENOR in February of 2013.)

SE-SIS, metal carrier

SIS SS 11 10 31-1982 Powder metallurgy - Metallic powders - Determination of flowability
SIS SS IEC 166:1981 Fixed metallized paper dielectric capacitors for direct current
SIS SS 27 11 12-1986 Corrugated metal sheets — Determination of loadbearing capacity at distributed load
SIS SS 11 23 71-1979 Metallic materials — Uniaxial load fatigue testing — Design of test pieces
SIS SS 27 11 13-1986 Corrugated metal sheets — Determination of loadbearing capacity at concentrated load

IECQ - IEC: Quality Assessment System for Electronic Components, metal carrier

QC 400101/ SU 0002-1984 Detail Specification for Electronic Components Fixed Low-Power Non-Wirewound Thin Film Metal Dielectric a.c. and d.c. Resistors
QC 400101/ SU 0001-1984 Detail Specification for Electronic Components Fixed Low-Power Non-Wirewound Thin Film Metal Dielectric a.c. and d.c. Resistors
QC 400101/ SU 0003-1984 Detail Specification for Electronic Components Fixed Low-Power Non-Wirewound Thin Film Metal Dielectric a.c. and d.c. Resistors
QC 400101/ SU 0006-1990 Detail Specification for Electronic Components Fixed Low-Power Non-Wirewound Metal Film a.c. and d.c. and Pulse Resistors Type PI-4

U.S. Air Force, metal carrier

AIR FORCE A-A-59131 A-2004 DETECTOR, METAL FLAW, ELECTRONIC

Aerospace Industries Association/ANSI Aerospace Standards, metal carrier

AIA/NAS NAS 1684-1988 Eyelet, Metallic, Electrical, Flat Flanged Type
AIA/NAS NAS 549-1998 Washer, Nonmetallic - Insulating, Electrical Rev. 4
AIA/NAS NAS 1544-1979 Plate, Wall, Electrical, Weatherproof (Rev. 1)
AIA/NAS NAS 1788-1992 Eyelet, Metallic, Electrical, Rolled Flanged Type Rev. 2
AIA/NAS NAS 1723-1992 Eyelet, Metallic, Electrical, Rolled Flanged Type (Rev. 1)
AIA/NAS NAS 1453-1965 Eyelet, Metallic, Electrical, Printed Circuit Board, Funnel Type

BELST, metal carrier

STB 835-97 Stove conditions metallic. General specifications

Professional Standard - Nuclear Industry, metal carrier

EJ/T 647-1994 Industrial ion implanter for metal

Association of German Mechanical Engineers, metal carrier

DVS 2107-2003 Plasma cutting of metal materials
DVS 2107-2010 Plasma cutting of metal materials
DVS 3204-1988 Electron beam weldability of metallic materials
DVS 3204-2013 Electron beam weldability of metallic materials

未注明发布机构, metal carrier

DIN EN 10234:1994 Metallic materials; Tube; Drift expanding test
DIN EN ISO 21968 E:2018-11 Measurement of coating thickness of non-magnetic metallic coatings on metallic and non-metallic substrates Phase-sensitive eddy current method (draft)
DIN EN ISO 4490 E:2017-04 Determination of flow rate of metal powder using calibrated funnel (Hall flowmeter) (draft)
DIN 51368 Determination of fraction separated by hydrochloric acid from water mix metal working fluids
DIN 51520 E:2008-05 Lubricants - Metalworking fluids - Straight cutting oils (non aqueous fluids) SN; specifications

FI-SFS, metal carrier

SFS 3068-1974 Metal packaging. deep water round box
SFS 3067-1974 Metal packaging. Deep water rectangular box

BE-NBN, metal carrier

NBN-EN 10234-1994 Metallic materials. Tube. Drift expanding test

Standard Association of Australia （SAA）, metal carrier

AS 2084:1987 Non-destructive testing - Eddy current testing of metal tubes

International Electrotechnical Commission (IEC), metal carrier

IEC 60166:1965 Fixed metallized paper dielectric capacitors for direct current

VDI - Verein Deutscher Ingenieure, metal carrier

VDI 3593-1976 Material flow in the metall stamping plan

GM Daewoo, metal carrier

GMKOREA EDS-T-7422-2011 Test Method of Weatherability of Organic Coating for Metal or Macromolecule Base Metal

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, metal carrier

GB/T 34104-2017 Metallic materials—Verification of the alignment of testing machines

ATIS - Alliance for Telecommunications Industry Solutions, metal carrier

T1.TRQ.7-2002 Non-Loaded Metallic Loops Supporting Basic Voicegrade Services
T1.TR.43-1995 Algorithms for Load Coil Detection on Metallic Pairs Assigned to Digital Subscriber Lines

Professional Standard - Ferrous Metallurgy, metal carrier

YB/T 4335-2013 Metallurgy composite bi-metal seamless steel tubes for liquid service
YB/T 127-2014 Ferrous metals-testing methods for electromagnetic (eddy-current) sorting
YB/T 127-1997 Ferrous metals.Testing methods for electromagnetic (eddy-current ) sorting

Danish Standards Foundation, metal carrier

DS/EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method
DS/EN 62416:2010 Semiconductor devices - Hot carrier test on MOS transistors
DS/EN ISO 13517:2013 Metallic powders - Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)
DS/EN ISO 4490:2008 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
DS/ISO 18086:2021 Corrosion of metals and alloys – Determination of AC corrosion – Protection criteria

CO-ICONTEC, metal carrier

ICONTEC 1031-1981 Electronics. Transformers, measurement of no-load current losses
ICONTEC 1817-1982 Electronics. Metal wire used as a circuit conductor
ICONTEC 2186-1986 Electronics. Metal wires, wires and insulators with heat-resistant mesh polyethylene, mainly used for current shunting and transmission

KR-KS, metal carrier

KS D ISO 4490-2010 Metallic powders－Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
KS B ISO 8525-2020 Airborne noise emitted by machine tools — Operating conditions for metal-cutting machines
KS B 5546-2003(2023) Pendulum impact tester for non-metallic materials

国家市场监督管理总局、中国国家标准化管理委员会, metal carrier

GB/T 11032-2020 Metal-oxide surge arresters without gaps for a.c. systems
GB/T 14146-2021 Test method for carrier concentration of silicon epitaxial layers—Capacitance-voltage method
GB/T 40377-2021 Corrosion of metals and alloys—Determination of AC corrosion—Protection criteria
GB/T 38213-2019 Corrosion of metals and alloys—Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
GB/T 41329-2022 Determination of flow rate of metallic powders—Calibrated funnel method (Gustavsson flowmeter)

Military Standard of the People's Republic of China-General Armament Department, metal carrier

GJB 1214-1991 General Specification for Fixed Capacitors with Reliability Indexes for High-Quality Metalized Plastic Film Dielectric DC, AC or AC, DC Metal Shell Sealed Capacitors
GJB 972-1990 General specification for plastic film or metallized plastic film dielectric direct current or alternating current non-metallic shell fixed capacitors with reliability indicators

SAE - SAE International, metal carrier

SAE J2658-2010 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J2658-2013 Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J2551-2013 Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications
SAE ARP618A-1988 Boss Fittings@ Metal Seal@ Fluid Systems: General Requirements For
SAE ARP618A-1985 Boss Fittings@ Metal Seal@ Fluid Systems: General Requirements for

Professional Standard - Chemical Industry, metal carrier

HG/T 3942-2007 Sodium hydroxide for industrial use.Determination of metal and nonmetal ions content.ICP method

CEN - European Committee for Standardization, metal carrier

EN ISO 4490:2001 Metallic Powders - Determination of Flow Time by Means of a Calibrated Funnel (Hall Flowmeter)
EN 2379:2018 Aerospace series - Fluids for assessment of non-metallic materials
EN 6097:2019 Aerospace series - Bearing@ spherical plain@ metal to metal@ extra wide inner ring in corrosion resisting steel - Dimensions and loads - Inch series

Lithuanian Standards Office , metal carrier

LST EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005)
LST EN 62416-2010 Semiconductor devices - Hot carrier test on MOS transistors (IEC 62416:2010)
LST EN ISO 4490:2008 Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2008)

American Society of Mechanical Engineers (ASME), metal carrier

ASME STP-PT-073-2014 STRESS INTENSITY FACTOR AND K-FACTOR ALIGNMENT FOR METALLIC PIPES

AT-ON, metal carrier

ONORM Z 1600-1991 Fixeil climbs made of metal; ladders and climbing irons

Underwriters Laboratories (UL), metal carrier

UL 184 BULLETIN-2000 UL Standard for Safety Portable Metal Ladders

U.S. Military Regulations and Norms, metal carrier

ARMY MIL-B-50999 (3)-1996 BOOSTER, AUXILIARY, M122, METAL PARTS FOR, AND ASSEMBLY AND LOADING OF
ARMY MIL-B-50999 NOTICE 1-1996 BOOSTER, AUXILIARY, M122, METAL PARTS FOR, AND ASSEMBLY AND LOADING OF
ARMY MIL-B-50999-1971 BOOSTER, AUXILIARY, M122, METAL PARTS FOR, AND ASSEMBLY AND LOADING OF
ARMY MIL-C-71178 NOTICE 1-1996 CARTRIDGE, 40MM, HIGH VELOCITY, DUMMY, M922A1 METAL PARTS FOR
ARMY MIL-C-71178-1993 CARTRIDGE, 40MM, HIGH VELOCITY, DUMMY, M922A1 METAL PARTS FOR
ARMY MIL-PRF-55514 G SUPP 1-2013 CAPACITORS, FIXED, PLASTIC (OR METALLIZED PLASTIC) DIELECTRIC, DC OR DC-AC, IN NONMETAL CASES, NON-ESTABLISHED AND ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
ARMY MIL-F-46283-1960 FIRING DEVICE, NON-METALLIC, PULL-TYPE, 35E1 LOADING, ASSEMBLING AND PACKING
ARMY MIL-T-70755 (1)-2000 TEST VEHICLE PROJECTILE METAL PARTS AND LOADING, ASSEMBLING, AND PACKAGING
ARMY MIL-T-70755 NOTICE 1-1996 TEST VEHICLE PROJECTILE METAL PARTS AND LOADING, ASSEMBLING, AND PACKAGING
ARMY MIL-T-70755-1988 TEST VEHICLE PROJECTILE METAL PARTS AND LOADING, ASSEMBLING, AND PACKAGING
ARMY QPL-55514-44 NOTICE 1-2008 CAPACITORS, FIXED, PLASTIC (OR METALLIZED PLASTIC) DIELECTRIC, DC OR DC-AC, IN NONMETAL CASES, NON-ESTABLISHED AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-55514/9 C-2013 CAPACITORS, FIXED, METALLIZED PLASTIC DIELECTRIC, DC, IN NONMETAL CASES, ESTABLISHED RELIABILITY, STYLE CFR13 AND CFR14
ARMY MIL-F-48275 (1)-1996 FUZE, PIBD, M550; TEST VEHICLE FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKING [Superseded: ARMY MIL-DTL-50869 H CONT. DIST., ARMY MIL-DTL-50869 G (1) CONT. DIST., ARMY MIL-DTL-50869 G CONT. DIST., ARMY MIL-DTL-0050869F, ARMY MIL-F-50869E (5), A
ARMY MIL-F-48275 REINST NOTICE 2-1991 FUZE, PIBD, M550; TEST VEHICLE FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKING
ARMY MIL-F-48275-1974 FUZE, PIBD, M550; TEST VEHICLE FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKING
ARMY MIL-F-46283 NOTICE 1-1996 FIRING DEVICE, NON-METALLIC, PULL-TYPE, 35E1 LOADING, ASSEMBLING AND PACKING
ARMY MIL-DTL-32268 VALID NOTICE 1-2013 Fuze, Point Detonating, M935 Metal Parts for and Loading, Assembling and Packing
ARMY MIL-PRF-55514/11 C VALID NOTICE 1-2008 Capacitors, Fixed, Metalized Plastic Dielectric, DC, in Nonmetal Cases, Established Reliability, Styles CFR26 and CFR27

Professional Standard - Non-ferrous Metal, metal carrier

YS/T 835-2012 Determination of platinum,palladium and rhodium in exhaust purfication metallic substrate auto-catalysts .Flame atomic absorption spectrometry

Professional Standard - Electron, metal carrier

SJ 2757-1987 Method of measurement by infra-red reflection for charge carrier concentraiton of heavily doped semiconductors
SJ 20390-1993 Specification for glass-to-metal headers used in electron devices
SJ 20818-2002 Metal plating and chemical treatment for electronic equipment

Xinjiang Provincial Standard of the People's Republic of China, metal carrier

DB65/T 3485-2013 Measurement method for minority carrier lifetime of solar grade polysilicon block

Professional Standard - Hydroelectric Power, metal carrier

SD 179-1986 low voltage AC gapless metal oxide arresters

National Association of Corrosion Engineers (NACE), metal carrier

NACE WJ-4-2012 Waterjet Cleaning of Metals-Light Cleaning (WJ-4) (Item No. 21157)
NACE WJ-3-2012 Waterjet Cleaning of Metals-Thorough Cleaning (WJ-3) (Item No. 21156)

GOSTR, metal carrier

GOST R 59037-2020 Additive technologies. Designing metal parts. Guidelines processes

Shandong Provincial Standard of the People's Republic of China, metal carrier

DB37/T 4599-2023 Technical specification for AC electromagnetic field testing of metal structures

Institute of Electrical and Electronics Engineers (IEEE), metal carrier

IEEE Std C62.11-2020 Metal-oxide surge arresters for alternating current power circuits
IEEE Std C62.11-1999 Metal-oxide surge arresters for AC power circuits ( 1 kV)
IEEE Std C62.11-1993 Metal-oxide surge arresters for alternating current power circuits
IEEE 848-2015 Standard Procedure for the Determination of the Ampacity Derating Factor for Fire-Protected Cable Systems

GM North America, metal carrier

GM GM9511P-1998 Scab Corrosion Creepback of Paint Systems on Metal Substrates

国家发展和改革委员会, metal carrier

WB/T 1105-2020 Technical requirements for metal logistics boxes for used power batteries

VE-FONDONORMA, metal carrier

NORVEN 558-1972 Soft metal wires used in electronic devices
NORVEN 559-1971 Soft metal wires used in electronic devices
NORVRN 553-1971 Glossary for metal wire conductors (used in electronic circuits)

Professional Standard - Electricity, metal carrier

DL/T 1581-2016 Accelerated electrolytic corrosion test method for metal accessories of disc suspension porcelain or glass insulators for direct current systems

国家林业和草原局, metal carrier

LY/T 3041-2018 Test method for cyclic load performance of metal fastener connections in wooden structures