11.040.50 射线照相设备 标准查询与下载



共找到 1766 条与 射线照相设备 相关的标准,共 118

本标准适用于医用诊断X线机械装置(以下简称装置)。本标准不适用于计算机断层(CT)机械装置。

General specification for mechanical units of medical diagnostic X-ray equipment

ICS
11.040.50
CCS
C43
发布
1985-11-30
实施
1986-07-01

本标准适用于医用X射线设备的三芯和四芯高压电缆插头插座,该部件为医用X射线设备的高压接插件。

High-voltage cable plug and socket connections for medical X-ray equipment

ICS
11.040.50
CCS
K13
发布
1985-10-31
实施
1986-07-01

本标准适用于工作电压为10~150kV的医用诊断X线发生装置。本标准不适用于计算机断层扫描的X线发生装置。

The general specifications on medical diagnostic X-ray generating unit

ICS
11.040.50
CCS
C43
发布
1984-06-22
实施
1985-02-01

IEC 61223-3-7:2021 applies to DENTAL CONE-BEAM COMPUTED TOMOGRAPHY X-RAY EQUIPMENT, hereafter also called DENTAL CBCT EQUIPMENT, that conforms to IEC 60601-2-63:2012 and IEC 60601-2-63:2012/AMD1:2017. This document applies to ACCEPTANCE TESTS and CONSTANCY TESTS on DENTAL CONE-BEAM COMPUTED TOMOGRAPHY X-RAY EQUIPMENT. The aim of ACCEPTANCE TESTS is to verify compliance of the installation or MAJOR SERVICE ACTION with specifications affecting the image quality, RADIATION OUTPUT and PATIENT positioning. The requirements specified in this document are minimal requirements. The MANUFACTURER can establish criteria for the tests described here that exceed the levels contained in this document. CONSTANCY TESTS are performed to ensure that the functional performance of ME EQUIPMENT meets established criteria and to enable the early recognition of changes in the properties of components of the ME EQUIPMENT, and to verify compliance with specifications affecting the image quality, RADIATION OUTPUT and PATIENT positioning. This document also contains requirements for the ACCOMPANYING DOCUMENTS associated with ACCEPTANCE AND CONSTANCY TESTING of the DENTAL CBCT EQUIPMENT. This document does not apply to: - aspects of thermal, EMD (electromagnetic disturbances), mechanical and electrical safety; - aspects of mechanical, electrical and software performance, unless they are essential for performing the ACCEPTANCE TESTS and CONSTANCY TESTS, and directly affect image quality, RADIATION OUTPUT and PATIENT positioning. Equipment in the scope of IEC 61223-3-5 is excluded from the scope of this document. DENTAL EXTRA-ORAL X-RAY EQUIPMENT can provide modalities which are in the scope of IEC 61223-3-4. In this case, the respective clauses of the IEC 61223-3-4 apply. The object of this document is to establish: - the essential parameters which describe the performance of DENTAL CBCT EQUIPMENT with regard to the image quality, RADIATION OUTPUT and PATIENT positioning; - methods of testing and whether measured quantities related to those parameters comply with the specified requirements. These methods rely on non-invasive measurements performed once the installation or a MAJOR SERVICE ACTION is completed.

Evaluation and routine testing in medical imaging departments - Part 3-7: Acceptance and constancy tests - Imaging performance of X-ray equipment for dental cone beam computed tomography

ICS
11.040.50
CCS
发布
2024-04-25
实施

BS EN IEC 63465 Calibration and quality control in the use of radionuclide calibrators

ICS
11.040.50
CCS
发布
2024-04-05
实施
2024-04-05

本文件规定了掌上超声仪临床应用规范。包括适应证、禁忌证、应用场景、扫查流程、图像质控、诊断结果报告形式等内容。

Specification for clinical application of handled ultrasound device

ICS
11.040.50
CCS
C358
发布
2024-02-22
实施
2024-05-01

本文件描述了X射线管组件的固有滤过和滤过材料质量等效滤过的测定方法,规定了X射线管组件在随附文件中的符合性声明和X射线管组件标记的要求,以及对滤过材料的指示和符合性声明要求。本文件适用于医疗诊断应用中高压150kV以下的X射线管组件和滤过材料。对于高压大于50kV,本文件仅适用于带有钨或钨合金靶的X射线管组件。

Medical electrical equipment - Diagnostic X-rays - Part 1: Determination of equivalent filtration and intrinsic filtration

ICS
11.040.50
CCS
C43
发布
2024-02-07
实施
2025-03-01

本文件规定了用于描述心脏断层成像专用单光子发射计算机断层扫描(SPECT)系统的性能,描述了相应的试验方法。这些系统包括仅专用于心脏断层成像的SPECT系统,或带有专用心脏断层成像子系统(该子系统不在平面、全身和SPECT成像的伽玛照相机标准范围内)的通用SPECT系统。

Cardiac single photon emission computed tomography device performance and test rules

ICS
11.040.50
CCS
C43
发布
2024-02-07
实施
2025-03-01

本文件描述了X射线计算机体层摄影设备(以下简称CT扫描装置)在采用自动曝光控制技术时,相应的成像性能评价方法。本文件适用于全身及专用CT扫描装置,包括为放射治疗计划提供图像数据的CT扫描装置。

Image quality evaluation method of X-ray computed tomography equipment Part 4: Imaging performance evaluation under automatic exposure control

ICS
11.040.50
CCS
C43
发布
2024-02-07
实施
2025-09-01

本文件规定了基于超带宽雷达的导航体动成像系统及方法的术语和定义、要求、构成及原理、成像方法、安装。 本文件适用于基于超带宽雷达的导航体动成像系统及方法。

Navigation body motion imaging system and method based on ultra-bandwidth radar

ICS
11.040.50
CCS
M751
发布
2024-01-19
实施
2024-02-03

本文件规定了用于心电短时或长时采集的干性电极的术语定义、性能要求和试验方法。

ECG dry electrode

ICS
11.040.50
CCS
C358
发布
2023-12-29
实施
2024-03-01

Medical electrical equipment — Diagnostic X-rays — Part 1: Determination of quality equivalent filtration and permanent filtration

ICS
11.040.50
CCS
发布
2023-12-28
实施

Evaluation and routine testing in medical imaging departments — Part 3-5: Acceptance and constancy tests — Imaging performance of computed tomography X-ray equipment

ICS
11.040.50
CCS
发布
2023-12-28
实施

Medical electrical equipment — Dose area product meters

ICS
11.040.50
CCS
发布
2023-12-28
实施

Medical electrical equipment. Characteristics of digital X-ray imaging devices - Determination of dual-energy subtraction efficiency. Detectors used for dual-energy radiographic imaging

ICS
11.040.50
CCS
发布
2023-09-30
实施
2023-09-30

本文件规定了CT球管的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存等技术要求。

CT tube

ICS
11.040.50
CCS
C358
发布
2023-09-22
实施
2023-09-30

本文件规定了红光艾灸防护机构的术语和定义、组成及结构、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于红光艾灸防护机构。

Red light moxibustion protective mechanism

ICS
11.040.50
CCS
C358
发布
2023-09-08
实施
2023-09-23

本文件规定了切片图像处理系统技术规范的术语和定义、技术要求。 本文件适用于切片图像处理系统的技术规范。

Technical specifications of slice image processing system

ICS
11.040.50
CCS
I657
发布
2023-09-07
实施
2023-09-22

Breast cone beam CT quality control technical specifications

ICS
11.040.50
CCS
C 43
发布
2023-09-06
实施
2023-10-10

本文件描述了超声成像设备超声造影成像性能的试验条件和试验方法。本文件适用于具备造影功能的超声成像设备。本文件不适用于采用胃肠助显剂进行信号增强的超声成像设备。

Test methods for contrast-enhanced ultrasound imaging performance

ICS
11.040.50
CCS
C41
发布
2023-09-05
实施
2024-09-15



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号