13.220.99 有关消防的其他标准 标准查询与下载



共找到 275 条与 有关消防的其他标准 相关的标准,共 19

Specifications for testing services of building fire protection facilities

ICS
13.220.99
CCS
C 84
发布
2023-04-03
实施
2023-07-01

本标准技术内容主要包括充换电设备技术要求、充电场所设置要求、换电场所设置要求、运营技术要求等方面。 4 充换电设备技术要求  4.1 总体要求 4.2 充电桩(座) 4.3充换电柜(架) 5 充电场所设置要求 5.1 平面布置 5.2 防火分隔 5.3 安全疏散 5.4 消防设施 5.5 电气安全 5.6 场所标识 6 换电场所设置要求 6.1 平面布置 6.2 防火分隔 6.3 安全疏散 6.4 消防设施 6.5 电气安全 6.6 场所标识 7 运营技术要求 7.1 数字化管理要求 7.2 运营平台技术要求 7.3 运营单位要求 附录A数据元描述 附录B数据字典

Fire Safety Technical Requirements for Electric Bicycle Charging and Swapping

ICS
13.220.99
CCS
O8290
发布
2023-03-27
实施
2023-03-28

宜宾市行政区域范围内换电式重卡换电站消防安全管理

Power-swapping heavy-duty truck swapping station Part 2: Fire safety management specifications

ICS
13.220.99
CCS
C 82
发布
2023-01-10
实施
2023-02-10

宜宾市行政区域内电动自行车集中充电场所的消防安全管理

Centralized charging places for electric bicycles Part 2: Fire safety management regulations

ICS
13.220.99
CCS
P 16
发布
2023-01-10
实施
2023-02-10

宜宾市行政区域范围内换电站火灾事故的专业处置。其他专职消防队伍、社会救援力量可参照执行

Part 3 of battery-swapping heavy-duty truck-swapping station: fire accident handling procedures

ICS
13.220.99
CCS
C 83
发布
2023-01-10
实施
2023-02-10

宜宾市行政区域范围内换电式重卡换电站消防安全设计管理

Power-swapping heavy-duty truck swapping station Part 1: Design code for fire safety

ICS
13.220.99
CCS
C 82
发布
2023-01-10
实施
2023-02-10

宜宾市行政区域范围内电动自行车集中充电场所的设计。电动摩托车、电动轻便摩托车和其他电动非机动车的集中充电场所的设计可参照本文件执行

Centralized charging places for electric bicycles Part 1: Code for fire protection design

ICS
13.220.99
CCS
P 16
发布
2023-01-10
实施
2023-02-10

宜宾市行政区域内电动自行车模块化智能充电系统建设

Centralized Charging Sites for Electric Bicycles Part 3: Guidelines for the Construction of Modular Smart Charging Systems

ICS
13.220.99
CCS
P 16
发布
2023-01-10
实施
2023-02-10

Technical requirements for fire safety in parking and charging places for electric bicycles

ICS
13.220.99
CCS
C 80
发布
2022-12-30
实施
2023-01-30

Operation and maintenance management specifications for building fire protection facilities IoT monitoring system

ICS
13.220.99
CCS
C 81
发布
2022-11-22
实施
2023-01-01

1   Scope This document provides guidance and rules to notified bodies (for fire dampers) allowing them to produce/validate an extended field of application report for fire dampers based on testing undertaken in accordance with EN 1366‑2. This document identifies the parameters that affect the fire resistance of fire dampers. It also identifies the factors that need to be considered when deciding whether, or by how much, the parameter can be extended when contemplating the fire resistance performance of an untested, or untestable variation in the construction. This document explains the principles behind how a conclusion on the influence of specific parameters/constructional details relating to the relevant criteria (E, I, S) can be achieved. This document does not cover dampers used for smoke control or non-mechanical fire barriers. It is the intention that the application of this document makes it possible to identify which specifications to test to maximize the field of application. Some information on test programmes is given for guidance purposes.

Extended application of results from fire resistance tests for service installations - Fire dampers

ICS
13.220.99
CCS
发布
2022-10-31
实施
2022-10-31

前言 III 1  范围 4 2  规范性引用文件 4 3  术语和定义 4 4  驱动气体、高分子吸收剂、规格、型号 2 4.1  驱动气体 2 4.2  高分子吸收剂 2 4.3  规格 3 4.4  型号 3 5  性能要求 3 5.1  使用温度范围 3 5.2  充装量 3 5.3  喷射性能 4 5.4  处置性能 4 5.5  使用温度喷射性能 4 5.6  振撞后的喷射性能 4 5.7  间歇喷射性能 4 5.8  密封性能 4 5.9  手持式处置装置机械强度 4 5.10  结构要求 5 5.11  推车式处置装置车架和行驶性能 6 5.12  抗腐蚀性能 7 5.13  虹吸管 7 5.14  塑料件要求 7 5.15  外观 7 5.16  压力指示器 7 6  试验方法 8 6.1  喷射性能试验 8 6.2  密封试验 9 6.3  振动试验 9 6.4  冲击试验 10 6.5  结构强度试验 10 6.6  操作力试验 10 6.7  行驶性能试验 11 6.8  腐蚀试验 11 6.9  外观检查 11 6.10  处置装置性能试验 11 7  标志 11 8  包装和运输 11 9  手册 12 9.1  使用者手册 12 9.2  维修手册 12 10  检验规则 12

Absorption dispoal device for leakage of organic liquid hazardous chemicals

ICS
13.220.99
CCS
S952
发布
2022-07-21
实施
2023-03-28

本文件适用于肇庆市行政区域内消防车道、救援场地和窗口标识的设置。

Specifications for setting fire lanes, rescue sites and window signs

ICS
13.220.99
CCS
C 80
发布
2022-07-18
实施
2022-08-01

本文件规定了既有建筑设有消防给水系统改造的术语和定义、设计、施工验收、维护管理。 本文件适用于既有建筑存在流量、压力、设置形式、数量不足等问题的消防给水系统的技术改造与维护管理。

Technical specification for retrofit of existing building fire water supply system

ICS
13.220.99
CCS
E4710
发布
2022-06-01
实施
2022-06-07

4  总体原则     4.1  基本原则     4.2  功能      4.3  等级划分      4.4  房屋及场地      4.5  管理人员配备      4.6  装备配置      4.7  指挥调度系统  5  装备技术指标      5.1  通用装备      5.2  安全巡查装备      5.3  智慧应急体系      5.4  初期处置装备      5.5  应急安全科普宣传装备 

Guidelines for construction of community emergency rescue station

ICS
13.220.99
CCS
S9490
发布
2022-01-26
实施
2022-01-26

本文件适用于江苏省民用建筑内管道燃气和瓶装燃气的安全使用和管理。

Gas Safety Code for Civil Buildings

ICS
13.220.99
CCS
C 80
发布
2021-12-31
实施
2022-01-31

Gas Safety Code for Civil Buildings

ICS
13.220.99
CCS
C80
发布
2021-12-31
实施
2022-01-31

本文件适用于民用建筑外墙、门窗洞口、阳台及出入口等处使用的雨篷,不适用于工业建筑、露营、农业等其他场所

Test rules for the combustion performance of civil building awnings

ICS
13.220.99
CCS
C 80
发布
2021-12-24
实施
2022-03-24

本标准包含六个章节、三个附表和参考文献。主要内容包括:范围、规范性引用文件、术语、消防技术服务工作要求、消防技术服务机构能力等级设置、消防技术服务机构能力等级评价指标以及附表。 消防技术服务机构能力等级设置是按照业务工作内容不同,将消防技术服务机构分为消防设施维护保养机构、消防设施检测机构和消防安全评估机构。依据企业基本从业条件、综合实力和社会信用程度,将消防技术服务机构能力分三个等级。 消防技术服务机构能力等级评价指标按照消防设施维护保养(简称维保)、消防设施检测(简称检测)和消防安全评估(简称评估)三个业务分别编制。维保/检测/评估服务机构能力等级评价指标主要内容有参评消防技术服务机构基本要求,消防技术服务机构能力等级评价计分标准和消防技术服务机构能力等级划分。

Evaluation For The Capability Of Fire Technical Service Institutions

ICS
13.220.99
CCS
E499
发布
2021-12-10
实施
2021-12-13

This document specifies the minimum values for power supplies according to DIN EN 12101-10 and control equipment according to ISO 21927-9

Smoke and heat control systems - Part 9: Minimum values for power supplies according to DIN EN 12101-10 and control equipment according to ISO 21927-9

ICS
13.220.99
CCS
发布
2021-12-00
实施
2021-12-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号