19.080 电工和电子试验 标准查询与下载

EN IEC 61010-2-011:2021 测量、控制和实验室用电气设备的安全要求 第 2-011 部分：制冷设备的特殊要求

IEC 61010-2-011:2019 is available as IEC 61010-2-011:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61010-2-011:2019 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever that equipment incorporates refrigerating systems as an integral part of, or separate from, the equipment and the equipment is in direct control of the refrigerating system. This document details all the requirements when up to 150 g of flammable refrigerant are used per stage of a refrigerating system. Additional requirements beyond the current scope of this document apply if a refrigerant charge of flammable refrigerant exceeds this amount. a) Electrical test and measurement equipment This is equipment which by electromagnetic means tests, measures, indicates or records one or more electrical or physical quantities, also non-measuring equipment such as signal generators, measurement standards, power supplies for laboratory use, transducers, transmitters, etc. b) Electrical industrial process-control equipment This is equipment which controls one or more output quantities to specific values, with each value determined by manual setting, by local or remote programming, or by one or more input variables. c) Electrical laboratory equipment This is equipment which measures, indicates, monitors, inspects or analyses materials, or is used to prepare materials, and includes in vitro diagnostic (IVD) equipment. This second edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) alignment with changes introduced by Amendment 1 of IEC 61010-1:2010; b) introduction of new defined terms or modified terms to align with Part 2-012 and other source documents. Editorial changes to use small capitals only for defined terms. Note the difference of defined term in 4.3.2.101 and abnormal operation in 11.7.104.3 and 11.7.104.5; c) clarifications for cooling tests in 4.4.2.10; d) changes pertaining to the accurate employment of the following terms: temperature, operating temperature, application temperature, controlled temperature, room ambient and ambient temperature; e) use of defined term to replace cooling system; f) move text of 4.4.2.101 to 4.3.2.101, since the purpose of as defined, is to simulate failure of the ambient conditions of 1.4.1 but not of the of the equipment; g) use of the term equipment to replace unit, apparatus, appliance, where applicable; h) in 5.1.2 dd) for high and low sides for each stage are required only under ; i) use of defined term to replace normal operation; j) use of defined term to replace user. It has the status of a group safety publication in accordance with IEC Guide 104.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment

EN IEC 61010-2-033:2021 测量、控制和实验室用电气设备的安全要求 第 2-033 部分：家用和专业用手持式万用表的特殊要求，能够测量电源电压

IEC 61010-2-033:2019 is available as IEC 61010-2-033:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-033:2019 specifies safety requirements for hand-held multimeters for domestic and professional use, capable of measuring mains. Hand-held multimeters are multi-range multifunction measuring instruments intended to measure voltage and other electrical quantities such as resistance or current. Their primary purpose is to measure voltage on a live mains. They are suitable to be supported by one hand during normal use. This second edition cancels and replaces the first edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - The scope has been reduced to hand-held multimeters. Voltmeters and clamp multimeters have been removed. They are addressed respectively by IEC 61010-2-030 and IEC 61010-2-032. The relevant definitions have been removed. - Subclause 4.4.2.101 has been relocated into Clause 102. - Clearances and creepage distances for wet locations and for measuring circuit terminals exceeding 1 000 V a.c. or 1 414 V d.c. have been specified. - Subclause 14.101 related to "Circuits or components used as transient overvoltage limiting devices in measuring circuits used to measure mains" has been removed. - References to IEC 61010-031 for probe assemblies and IEC 61010-2-032 for current sensors have been added. - Requirements for protection against mains overvoltage measuring circuits have been added. - Clause 102 has been rewritten. - Requirements for measuring circuits from 1 000 V to 3 000 V have been added. - An informative Annex CC about dimensions of 4-mm banana terminals has been added. - A flowchart for insulation according to the type of circuit has been added in a new Annex DD.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters for domestic and professional use, capable of measuring mains voltage

EN IEC 61010-2-032:2021 测量、控制和实验室用电气设备的安全要求 第 2-032 部分：用于电气测试和测量的手持式和手持式电流传感器的特殊要求

IEC 61010-2-032:2019 is available as IEC 61010-2-032:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-032:2019 specifies safety requirements for hand-held and hand-manipulated current sensors described below. These current sensors are for measuring, detecting or injecting current, or indicating current waveforms on circuits without physically opening the current path of the circuit being measured. They can be stand-alone current sensors or accessories to other equipment or parts of combined equipment (see Figure 101). These include measurement circuits which are part of electrical test and measurement equipment, laboratory equipment, or process control equipment. These current sensors and circuits need additional protective means between the current sensor, the circuit and an operator. This fourth edition cancels and replaces the third edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - It has been indicated that current sensors used as fixed equipment are not within the scope of this document. - Fork-style current sensors have been added. - Requirements from Part 2-033 applicable to clamp multimeters that have a primary purpose of measuring voltage on live mains have been included in the new normative Annex EE. - Clearances and creepage distances for measuring circuit terminals exceeding 1 000 V a.c. or 1 414 V d.c. and for wet locations have been specified. - Reduced creepage distances are allowed to be according to material group I for all insulating materials. - Requirements for input/output circuits of Type A, Type B and Type C current sensors have been detailed in 6.9.102. - Requirements for output circuit leads have been modified. - The Jaw impact test has been limited to the front of the jaws. - The abrasion test for cords of flexible current sensors has been removed and replaced by a pressure test at high temperature. - The voltage source for testing overvoltage limiting components or circuits may be limited to 400 V. - Reference to IEC 61010-031 for probe assemblies has been added. - Requirements for the prevention of transient overvoltages for mains voltage measuring circuits have been added. - Requirements for measuring circuits from 1 000 V to 3 000 V have been added. - An informative Annex CC about the dimensions of banana terminals has been added. - A flowchart for insulation according to the type of circuit has been added in a new Annex DD.

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

OVE EN 62052-31/AC2-2021 电力计量设备（AC） 一般要求、测试和测试条件 第31部分：产品安全要求和测试（勘误表 2）（德文版）

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests (Corrigendum 2) (german version)

T/CSTE 0176-2021 “领跑者”标准评价要求 移动式空调器

4.2 评价指标分类 4.2.1 移动式空调器“领跑者”标准中所包括的指标分为基础指标、核心指标和创新性指标。 4.2.2 基础指标包括安全、电磁兼容、性能。 4.2.3 核心指标包括制冷量、热泵制热量、能效比、性能系数、噪声。 4.2.4 创新性指标包括待机功率、交互功能、排水间隔时间。鼓励根据条件成熟情况适时增加 与产品性能和消费者关注的相关创新性指标。 4.2.5 核心指标和创新性指标分为三个等级，包括先进水平，相当于企业标准排行榜中 5 星级 水平；平均水平，相当于企业标准排行榜中 4 星级水平；基准水平，相当于企业标准排行榜中 3 星级水平。

Assessment requirements for forerunner standard - Mobile air conditioners

JIS C 1010-2-32:2021 测量、控制和试验室用电气设备的安全要求. 第2-32部分: 电测量和试验用手持和手动电流传感器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-32: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

DS/EN IEC 61010-2-051:2021 《测量、控制和实验室用电气设备安全要求》第2-051部分：混合和搅拌用实验室设备的特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

DS/EN IEC 61010-2-061:2021 《测量、控制和实验室用电气设备安全要求》第2-061部分：热雾化和电离实验室原子光谱仪的特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

EN IEC 61010-2-051:2021 测量、控制和实验室用电气设备的安全要求 第 2-051 部分：混合和搅拌实验室设备的特殊要求

NEW! IEC 61010-2-051:2018 is available as IEC 61010-2-051:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-051:2018 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and stirring, where mechanical energy influences the shape or size or homogeneity of materials and their accessories. Such devices can contain heating elements. It has the status of a group safety publication in accordance with IEC Guide 104. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - adaptation of changes introduced by Amendment 1 of IEC 61010-1; - added tolerance for stability of AC voltage test equipment to Clause 6; - added required assessment for equipment intended to be used with flammable, hazardous, or toxic fluids to Clause 17. This Part 2-051 is intended to be used in conjunction with IEC 61010-1. It was established on the basis of the third edition (2010) and its Amendment 1 (2016).

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

EN IEC 61010-2-061:2021 测量、控制和实验室用电气设备的安全要求 第 2-061 部分：具有热雾化和电离功能的实验室原子光谱仪的特殊要求

NEW! IEC 61010-2-061:2018 is available as IEC 61010-2-061:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-061:2018 applies to electrically powered laboratory atomic spectro­meters with thermal atomization. It has the status of a group safety publication in accordance with IEC Guide 104. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - adaptation of changes introduced by Amendment 1 of IEC 61010-1; - added tolerance for stability of AC voltage test equipment to Clause 6; - added requirement for interlock systems containing electric/electronic or programmable components to Clause 15.

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

OVE EN EC 62052-41-ED1-2021 电能计量设备 一般要求、试验和试验条件 第41部分：多能量和多费率仪表的能量注册方法和要求（IEC 13/1845/CDV）（英文版）

Electricity metering equipment - General requirements, tests and test conditions - Part 41: Energy registration methods and requirements for multi-energy and multi-rate meters (IEC 13/1845/CDV) (english version)

T/CEEIA 525-2021 光纤传感器电气设备局部放电检测 第 2 部分：气体绝缘金属封闭开关设备（GIS）

本文件描述了基于光纤传感器的 GIS 局部放电检测，包括：术语和定义、GIS 局部放电光纤传感 系统的安装、GIS 局部放电试验、GIS 局部放电的定位、GIS 局部放电光纤传感系统的要求、GIS 局部 放电光纤传感系统的试验项目及要求、执行局部放电检测的条件、检测报告。 本文件适用于 72.5kV 及以上电压等级的 GIS。

Electrical equipment partial discharge detection by optical fiber sensor— Part 2：Gas insulated switchgear (GIS)

T/CEEIA 526-2021 光纤传感器电气设备局部放电检测 第 3 部分：变压器

本文描述了基于光纤传感器的变压器局部放电检测，包括：术语和定义、变压器局部放电光纤传 感系统的安装、变压器局部放电的试验、变压器局部放电的定位、变压器局部放电光纤传感系统的要 求、变压器局部放电光纤传感系统的试验项目及要求、执行局部放电检测的条件、检测报告。 本文件适用于 110kV 及以上电压等级的电力变压器。

Electrical equipment partial discharge detection by optical fiber sensor— Part 3：Transformer

T/CEEIA 528-2021 光纤传感器电气设备振动检测 第2部分：气体绝缘金属封闭开关设备（GIS）

本文件描述了光纤振动传感器对气体绝缘金属封闭开关设备（GIS）振动检测通用的检测方法，包括：振动传感器在GIS设备上的安装位置及安装方法、GIS振动检测及评估方法、检测系统的工作环境和检测结果记录。 本文件适用于72.5kV及以上电压等级的GIS设备。

Electrical equipment vibration detection technology based on fiber optic sensors— Part 2：Gas insulated switchgear (GIS)

T/CEEIA 524-2021 光纤传感器电气设备局部放电检测 第1部分：通则

本文件描述了基于光纤传感器的电气设备局部放电检测，包括：术语和定义、检测原理、光纤局部放电传感系统结构及主要部件参数、传感系统的调试和技术要求。 本文件适用于110 kV及以上电压等级的电力变压器和72.5 kV及以上电压等级的气体绝缘金属封闭开关设备（GIS）。

Electrical equipment partial discharge detection by optical fiber sensor— Part 1：General specification

T/CEEIA 527-2021 光纤传感器电气设备振动检测 第 1 部分：通则

本文件描述了光纤传感器电气设备振动检测通用的检测原理、光纤振动传感系统组成、电气设备 振动检测方法和步骤、电气设备振动评估准则和电气设备振动检测的要求。 本文件适用于110kV及以上电压等级的电力变压器和72.5kV及以上电压等级的气体绝缘金属封闭 开关设备（GIS）。

Electrical equipment vibration detection based on fiber optic sensors— Part 1：General specification

T/CEEIA 529-2021 光纤传感器电气设备振动检测 第 3 部分：变压器

本文件描述了基于光纤振动传感器对变压器振动检测通用的检测方法，包括：振动传感器在变压 器上的安装位置及安装方法、变压器振动检测及评估方法、检测系统的工作环境和检测结果记录。 本文件适用于 110kV 及以上电压等级的变压器设备。

Electrical equipment vibration detection technology based on fiber optic sensors Part 3：Transformer

PN-EN IEC 61010-2-030-2021-06/A11-2021-08 E 测量、控制和实验室用电气设备的安全要求 第 2-030 部分：具有测试或测量电路的设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-030: Particular requirements for equipment having testing or measuring circuits

LST EN IEC 61010-2-130:2021 测量、控制和实验室用电气设备的安全要求 供儿童在教育机构中使用的设备的特殊要求（IEC 61010-2-130:2021）

Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for equipment intended to be used in educational establishments by children (IEC 61010-2-130:2021)

PN-EN IEC 61010-2-091-2021-07 E 测量、控制和实验室用电气设备的安全要求 第 2-091 部分：柜式 X 射线系统的特殊要求（IEC 61010-2-091:2019）

Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-091: Particular requirements for cabinet X-ray systems (IEC 61010-2-091:2019)