19.080 电工和电子试验 标准查询与下载

GSO IEC 62899-301-2:2021 印刷电子 第301-2部分：设备 接触印刷 刚性母版 印版母版图案尺寸的测量方法

IEC 62899-301-2:2017(E) defines measurement terms and methods related to the critical dimension of features and the registration accuracy of features on rigid plate masters. General critical dimensions are defined to evaluate the shape accuracy of features on the plate master. To evaluate the registration accuracy of features on the plate master, the specification for the registration mark for the plate master is specified. Then, common metrology procedures to measure the critical dimensions and the registration accuracy of the plate master are established for device manufacturers, printing master manufacturers and printing master manufacturing equipment vendors. The measurement terms which are measured by agreement between the user and the supplier are measured using the measurement methods given in this document.

Printed electronics - Part 301-2: Equipment - Contact printing - Rigid master - Measurement method of plate master pattern dimension

GSO IEC 61180:2021 低压设备的高压测试技术 定义、测试和程序要求、测试设备

IEC 61180:2016 is applicable to dielectric tests with direct voltage; dielectric tests with alternating voltage; dielectric tests with impulse voltage and test equipment used for dielectric tests on low-voltage equipment. This standard is applicable only to tests on equipment having a rated voltage of not more than 1 kV a.c. or 1,5 kV d.c. This standard is applicable to type and routine tests for objects which are subjected to high voltage tests as specified by the technical committee. The test equipment comprises a voltage generator and a measuring system. This standard covers test equipment in which the measuring system is protected against external interference and coupling by appropriate screening, for example a continuous conducting shield. Therefore, simple comparison tests are sufficient to ensure valid results. This standard is not intended to be used for electromagnetic compatibility tests on electric or electronic equipment. Tests with the combination of impulse voltages and currents are covered by IEC 61000-4-5. This standard provides the relevant technical committees as far as possible with: - defined terms of both general and specific applicability; - general requirements regarding test objects and test procedures; - methods for generation and measurement of test voltages; - test procedures; - methods for the evaluation of test results and to indicate criteria for acceptance; - requirements concerning approved measuring devices and checking methods and measurement uncertainty. Alternative test procedures may be required and these should be specified by the relevant technical committees. Care should be taken if the test object has voltage limiting devices, as they may influence the results of the test. The relevant technical committees should provide guidance for testing objects equipped with voltage limiting devices. This 1st edition of IEC 61180 cancels and replaces the 1st edition of IEC 61180-1, issued in 1992, and the 1st edition of IEC 61180-2, issued in 1994. Key words: High Voltage Test Techniques, Dielectric Tests, Disruptive Discharge, Withstand Voltage.

High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment

PN-EN IEC 61010-2-030-2021-06 E 测量、控制和实验室用电气设备的安全要求 第 2-030 部分：具有测试或测量电路的设备的特殊要求（IEC 61010-2-030:2017）

Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-030: Particular requirements for equipment having testing or measuring circuits (IEC 61010-2-030:2017)

DS/EN IEC 61010-2-130:2021 测量、控制和实验室用电气设备的安全要求 供儿童在教育机构中使用的设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use – Particular requirements for equipment intended to be used in educational establishments by children

BS EN IEC 61010-2-130:2021 测量, 控制和实验室使用电气设备的安全性要求. 第2-130部分: 教育机构中儿童和青少年使用设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for equipment intended to be used in educational establishments by children

EN IEC 61010-2-130:2021 测量、控制和实验室用电气设备的安全要求 第 2-130 部分：用于儿童在教育机构中使用的设备的特殊要求

IEC 61010-2-130:2021 specifies particular safety requirements for the following types of equipment a), b) or c) and their accessories intended to be used in educational establishments by children under the supervision of the responsible body. It specifies general safety requirements for equipment intended to be used in educational establishments by persons between the age of 3 years and the age of 16 years under the supervision of a responsible body. This first edition cancels and replaces IEC TS 62850, published in 2013. This edition includes the following significant technical changes with respect to IEC TS 62850: a) marking and documentation requirements; b) stability and handling requirements.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-130: Particular requirements for equipment intended to be used in educational establishments by children

DS/EN IEC 61010-2-091:2021 《测量、控制和实验室用电气设备安全要求》第2-091部分：柜式X射线系统的特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-091: Particular requirements for cabinet X-ray systems

EN IEC 61010-2-091:2021 测量、控制和实验室用电气设备的安全要求 第 2-091 部分：柜式 X 射线系统的特殊要求

IEC 61010-2-091:2019 is available as IEC 61010-2-091:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61010-2-091:2019 specifies particular safety requirements for cabinet X-ray systems, which fall under any of categories a), b) or c) below. a) Electrical test and measurement equipment This is equipment which by electromagnetic means tests, measures, indicates or records one or more electrical or physical quantities, also non-measuring equipment such as signal generators, measurement standards, power supplies for laboratory use, transducers, transmitters, etc. NOTE 1 This includes bench-top power supplies intended to aid a testing or measuring operation on another piece of equipment. Power supplies intended to power equipment are within the scope of IEC 61558 (see 1.1.2 h)). This standard also applies to test equipment integrated into manufacturing processes and intended for testing manufactured devices. NOTE 2 Manufacturing test equipment is likely to be installed adjacent to and interconnected with industrial machinery in this application. b) Electrical industrial process-control equipment This is equipment which controls one or more output quantities to specific values, with each value determined by manual setting, by local or remote programming, or by one or more input variables. c) Electrical laboratory equipment This is equipment which measures, indicates, monitors, inspects or analyses materials, or is used to prepare materials, and includes in vitro diagnostic (IVD) equipment. This equipment may also be used in areas other than laboratories; examples include selftest IVD equipment to be used in the home and inspection equipment to be used to check people or material during transportation. This second edition cancels and replaces the first edition published in 2012. It constitutes a technical revision. This edition includes the following significant changes from the first edition, as well as numerous other changes: - The scope of the document has been clarified and limited to equipment up to 500 kV. - Additional marking requirements for X-ray generating assemblies have been added. (5.1) - Requirements for high-voltage cables used in the X-ray assembly have been added. (6.5) - Insulation requirements have been added. (6.7) - Temperature requirements for beam-limiting devices have been added. (10.3) - Clarification has been provided on and , and test methods. (12) - Requirements for have been modified, taking into account functional safety standards. (15) - Requirements for reasonably foreseeable misuse have been clarified. (16) - Risk assessment has been made mandatory for specific aspects. (17)

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems

BS EN IEC 61010-2-030:2021+A11:2021 测量、控制和实验室用电气设备的安全要求 具有测试或测量电路的设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for equipment having testing or measuring circuits

DS/EN IEC 61010-2-034:2021 《测量、控制和实验室用电气设备安全要求》第2-034部分：绝缘电阻测量设备和电气强度试验设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength

EN IEC 61010-2-034:2021 测量、控制和实验室用电气设备的安全要求 第 2-034 部分：绝缘电阻测量设备和电气强度测试设备的特殊要求

IEC 61010-2-034:2017 This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of their publications for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. IEC 61010-2-034:2017 specifies safety requirements for measurement equipment for insulation resistance and test equipment for electric strength with an output voltage exceeding 50 V a.c. or 120 V d.c. This document also applies to combined measuring equipment which has an insulation resistance measurement function or an electric strength test measurement function. It has the status of a horizontal standard in accordance with IEC Guide 104. This publication is to be read in conjunction with IEC 61010-1:2010. Status Published Reference Document IEC 61010-2-034:2017 (EQV) IEC Technical Body IEC/TC 66 date of Availability (DAV) 2021-04-09 ICS 19.080 - Electrical and electronic testing 71.040.10 - Chemical laboratories. Laboratory equipment A-Deviation(s) Special National Condition(s)

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength

DS/EN IEC 61010-2-030:2021 测量、控制和实验室用电气设备的安全要求 第 2-030 部分：具有测试或测量电路的设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-030: Particular requirements for equipment having testing or measuring circuits

EN IEC 61010-2-030:2021 测量、控制和实验室用电气设备的安全要求 第 2-030 部分：具有测试或测量电路的设备的特殊要求

NEW! IEC 61010-2-030:2017 is available as IEC 61010-2-030:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-030:2017 This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of their publications for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. IEC 61010-2-030:2017 specifies safety requirements for equipment having testing or measuring circuits which are connected for test or measurement purposes to devices or circuits outside the measurement equipment itself. These include measuring circuits which are part of electrical test and measurement equipment, laboratory equipment, or process control equipment. The existence of these circuits in equipment requires additional protective means between the circuit and an OPERATOR. This second edition cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: Reference to IEC 61010-031 for probe assemblies and IEC 61010-032 for current sensors has been added. Indirect bonding for testing and measuring circuits has been modified, in particular to take into account the duration of current flow versus body current for a.c. and d.c. currents according to IEC TS 60479-1 and IEC TS 60479-2. Clearance and creepage distance for wet locations and for measuring circuit terminal exceeding 1 000 V a.c. or d.c have been specified. The voltage source for testing overvoltage limiting component or circuit may be limited to 400 V. Requirements against transient overvoltages for mains voltage measuring circuits have been added. Requirements for measuring circuits from 1 000 V d.c. to 1 500 V d.c. have been added. The corrigendum has been included in Tables K.102 to K.104. Requirements for reduction of transient overvoltages have been modified. An informative Annex CC about the dimensions of banana terminals has been added. Flowchart for insulation according to the type of circuit has been added in a new Annex DD. It has the status of a group safety publication in accordance with IEC Guide 104.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits

IEC 61010-2-130:2021 测量、控制和实验室用电气设备的安全要求 供儿童在教育机构中使用的设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Particular requirements for equipment intended to be used in educational establishments by children

T/CSEE 0222-2021 油浸式变压器（电抗器）多局部放电源的 特高频检测与分离技术导则

本文件规范了油浸式变压器（电抗器）多局部放电源的特高频检测装置功能要求、多源放电分离 方法要求和现场应用流程。 本文件适用于 110 kV 及以上变压器（电抗器）内多局部放电源的特高频检测与多源放电分离

Technical guidelines for UHF detection and separation of multiple partial discharge sources in oil-immersed transformers (reactors)

IEC GUIDE 115:2021 RLV

测量不确定度在电工行业合格评定活动中的应用

Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector

NF C41-083-3:2021 用于高压和大电流测试测量的仪器和软件 第3部分：交流和直流电压和电流测试的硬件要求

Instruments and software used for measurement in high-voltage and high current tests - Part 3 : requirements for hardware for tests with alternating and direct voltages and currents

OVE EN 61010-2-051/AA-2021 测量、控制和实验室用电气设备的安全要求 第 2-051 部分：混合和搅拌用实验室设备的特殊要求（修正案）（英文版）

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (Amendment) (english version)

CSA SPE-2021 电气设备现场评估标准规范

Model Code for the field evaluation of electrical equipment

PN-EN 61010-1-2011/A1-2019-04 P 测量、控制和实验室用电气设备的安全要求 第1部分：一般要求

Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 1: General requirements