共找到 1487 条与 手工工具 相关的标准,共 100 页
本标准规定了夹扭钳和剪切钳的术语(包括英文、法文和俄文)。 本标准适用于编写我国夹扭钳和剪切钳的各级产品标准。 本标准的图形仅作为示例,不限制制造厂对产品的设计。 本标准的附录A(提示的附录)中,列出了夹扭钳和剪切钳术语的德文、意大利文和西班牙文,以用作参考。
Pliers and nippers--Nomenclature
本标准规定了夹扭钳和剪切钳的技术要求、试验方法、检验规则与标志、包装、运输、贮存。 本标准适用于夹扭钳、剪切钳、夹扭剪切两用钳,不适用于带电作业和抗静电的钳子。当产品有特殊要求时,可不受本标准限制。
Pliers and nippers--General technical requirements
本标准规定了夹扭钳和剪切钳的试验方法。 本标准适用于夹扭钳、剪切钳和夹扭剪切两用钳。
Pliers and nippers--Methods of test
本标准规定了活扳手的产品分类、技术要求、试验方法、检验规则及包装、标志、运输与贮存。 本标准适用于扳拧螺栓和螺母的活扳手。
Adjustable wrenches
本标准规定了 4、6、80、100、120、160、200号米制圆锥和0、1、2、3、4、5、6号莫氏圆锥的尺寸和公差。 本标准适用于机床和工具柄用自夹圆锥。
Machine tools--Self-holding tapers for tool shanks
本标准适用于直柄麻花钻和直柄机用铰刀用传动扁尾及套筒的尺寸和公差。 本标准等效采用国际标准ISO 4203-1978《直柄工具-传动扁尾及套筒一尺寸》。
Driving tenons and sockets for parallel shank tools--Dimensions and tolerances
IEC 62841-4-7:2022 clause 1 of IEC 62841-1:2014, is applicable, except as follows: Addition: This document applies to pedestrian controlled walk-behind lawn scarifiers and lawn aerators which are designed for regenerating lawns by combing out materials such as grass, thatch and moss or cutting vertically into the lawn face using metallic tines; and/or rigid non-metallic tines which rotate about a horizontal axis. This document does not apply to pedestrian controlled walk-behind lawnmowers; towed/semi-mounted lawn scarifiers and lawn aerators; ride-on machines; non-powered lawn scarifiers and lawn aerators; combustion engine powered lawn scarifiers and lawn aerators; plug aerators (corers); hybrid and fuel cell powered machines and associated charging systems; and garden tractors or their attachments. The contents of the corrigendum of May 2023 have been included in this copy.
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators
ISO 1085:2016 specifies the size pairing of double-ended wrenches with unequal nominal widths across flats. NOTE The wrenches covered by this document are those identified in ISO 1703:2005 under reference nos. 1 1 01 02 0, 1 1 02 03 0, 1 1 02 04 0, 1 1 02 05 0, 1 1 02 06 0, 1 1 02 08 0.
Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
BS IEC 63241-2-11 Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for hand-held reciprocating saws
BS IEC 63241-2-5 Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for hand-held circular saws
BS IEC 63241-2-4 Electric motor-operated tools - Dust measurement procedure - Part 2-4: Particular requirements for hand-held sanders
Pliers and nippers — Slip joint pliers — Dimensions and test values
Pliers and nippers for electronics — Single-purpose nippers — Cutting nippers
1 Scope IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to pedestrian controlled walk-behind lawn scarifiers and lawn aerators which are designed for regenerating lawns by combing out materials such as grass, thatch and moss or cutting vertically into the lawn face using – metallic tines; and/or – rigid non-metallic tines which rotate about a horizontal axis. This document does not apply to – pedestrian controlled walk-behind lawnmowers; – towed/semi-mounted lawn scarifiers and lawn aerators; – ride-on machines; – non-powered lawn scarifiers and lawn aerators; – combustion engine powered lawn scarifiers and lawn aerators; – plug aerators (corers); – hybrid and fuel cell powered machines and associated charging systems; and – garden tractors or their attachments. NOTE 101 Pedestrian controlled walk-behind lawnmowers are covered by IEC 62841-4-3.
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators
产品分类;技术要求;试验方法;检验规则;标志、包装、贮存、运输。
Gardening tools pruning shears
产品分类;技术要求;试验方法;检验规则;标志、包装、贮存、运输。
Gardening tools hedge shears
1 Scope IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to hand-held and backpack – garden blowers; – garden vacuums; and – garden blower/vacuums. This document does not apply to – walk-behind garden blowers, walk-behind garden vacuums and walk-behind garden blower/vacuums; – robotic garden blowers, robotic garden vacuums and robotic garden blower/vacuums; – vacuum cleaners intended primarily for use indoors, for water suction cleaning or animal grooming; and – blowers intended primarily for use indoors, or animal grooming. NOTE 101 Vacuum cleaners and water-suction cleaning appliances, including vacuum cleaners for animal grooming are covered by IEC 60335-2-2. NOTE 102 Vacuum cleaners for commercial use are covered by IEC 60335-2-69.
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums
This document specifies the general technical requirements to be met by pliers and nippers. It does not specify insulating or antistatic characteristics of handle coatings. Plastic coatings or plastic sleeves are intended for gripping comfort only. This document is only applicable to pliers for which ISO standards exist.
Pliers and nippers — General technical requirements
This document specifies the principal dimensions of multiple slip joint pliers. It also specifies test values for the pliers to verify their aptitude to function in conformity with ISO 5744. General technical requirements are given in ISO 5743. The multiple slip joint pliers illustrated in this document are only examples and are not intended to affect the manufacturer's design.
Pliers and nippers — Multiple slip joint pliers — Dimensions and test values
This document specifies the principal dimensions of slip joint pliers, designated as No. 206 in ISO 5742, and the test values, in order to verify their aptitude to function in conformity with ISO 5744. The general technical requirements are given in ISO 5743. The slip joint pliers illustrated in this document are examples only and are not intended to affect the manufacturer's design.
Pliers and nippers — Slip joint pliers — Dimensions and test values
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号