25.220.60 标准查询与下载

FprEN 13523-25-2021 卷材涂层金属 测试方法 第25部分：耐湿性

Coil coated metals - Test methods - Part 25: Resistance to humidity

ASTM D5178-21 有机涂层耐侯性的标准试验方法

1.1?This test method covers the determination of the mar resistance on smooth, flat surfaces. Results are expressed in terms of force-to-mar films of organic coatings such as paint, varnish, and lacquer when applied to smooth, flat planar panel surfaces. 1.2?Units—The values st

Standard Test Method for Mar Resistance of Organic Coatings

OENORM EN 10169-2021 连续有机涂层（卷材涂层）扁钢产品 交货技术条件

Continuously organic coated (coil coated) steel flat products - Technical delivery conditions

ASTM A975-21 双扭六角网石笼和护墙垫（聚氯乙烯涂层的金属涂层钢丝或金属涂层钢丝）的标准规范

1.1 This specification covers gabions and revet mattresses produced from double-twisted metallic-coated wire mesh, and metallic-coated wire for lacing wire, stiffeners, and fasteners used for manufacturing, assembling, and installation of the product. This specification also covers gabions and revet mattresses in which the wire mesh, lacing wire, and stiffeners are poly(vinyl chloride) (PVC) coated after the metallic coating. 1.2 Double-twisted wire mesh for gabions and revet mattresses is produced in different styles, based on type of coating, as described in Section 4. 1.3 Units—The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.4 This specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification. 1.5 The following safety hazards caveat pertains only to the test methods portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

T/GDEIA 16-2021 铝箔无溶剂复合机

铝箔无溶剂复合机一般由放卷单元、涂布单元、复合单元、收卷单元组成，并配备张力系统及数控操作系统，与输胶机（双组份胶黏剂自动混胶机或单组份胶黏剂自动供胶机）、加温机、冷水机等附属装置共同构成。 机械速度　100～500m/min 运行质量　空料运行质量：在无料、未涂布状态下，机器运转应运行平稳、无异常噪音、润滑正常、运转部件温升正常。 带料运行质量：在带料、未涂布状态下，机器运转应运行平稳、无异常噪音、润滑正常、运转部件温升正常。 涂布质量　在带料、涂布状态下，机器正常运转后，停机涂布取样，实际涂布量与目标涂布量误差≤5%； 涂布均匀性，左、中、右三区涂布均匀误差≤2%。 张力控制　以力矩为单位的张力控制：反馈张力与目标张力波动误差≤±0.5Kgf。  以角度为单位的张力控制：运行过程角度波动误差≤±3°。 放卷质量　在带料、涂布状态下，机器正常运转过程中，基材展开平整，无折皱、无滑移。 平整度偏差±10mm的基材，通过自动纠偏系统稳定控制偏差≤±1 mm。 复合质量　在带料、涂布状态下，机器正常运转过程中，复合在制品应平整，无折皱，无滑移、无夹气现象； 复合在制品边沿应无渗胶，复合面无白点、漏涂缺白等现象。 收卷质量　在带料、涂布状态下，机器正常运转后停机，收卷过程应松紧合适、端面应无渗胶、无粘黏、无窜卷现象；收卷边缘应整齐，无折皱，菜心、凹凸等现象，左右平面平整度偏差≤±2 mm。

Solventless laminating machine?for aluminum foil

JIS K 5674 AMD 1:2021 无铅无铬的防锈漆(修改件1)

Lead-free, Chromium-free anticorrosive paints (Amendment 1)

ASTM D6083/D6083M-21 屋顶用液体丙烯酸涂料的标准规范

1.1?This specification covers liquid-applied water-dispersed acrylic latex elastomeric protective roof coatings. 1.2?This specification does not provide guidance for application. 1.3?The values stated in either SI units or inch-pound units are to be regarded separately as stan

Standard Specification for Liquid-Applied Acrylic Coating Used in Roofing

OENORM EN 13523-7-2021 卷材涂层金属 试验方法 第7部分：抗弯曲开裂（T 型弯曲试验）

Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)

ASTM D3236-15(2021) 热熔胶和涂料的表观粘度的标准测试方法

1.1 This test method covers the determination of the apparent viscosity of hot melt adhesives and coating materials compounded with additives and having apparent viscosities up to 200 000 millipascal second (mPa·s) (Note 3) at temperatures up to 175 °C (347 °F). NOTE 1—Although precision has not been studied, this procedure may be adaptable to viscosities higher than the present 200 000 mPa·s limit and temperatures above 175 °C (347 °F). Equipment described in this test method permits testing of materials having viscosities as high as 16 × 106 mPa·s and provides temperatures up to 260 °C (500 °F). NOTE 2—For petroleum waxes and their blends having apparent viscosities below 15 mPa·s, Test Method D445 is especially applicable. NOTE 3—One pascal second (Pa·s) = 1000 centipoise (cP); one millipascal-second = one centipoise. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials

OENORM EN 13523-25-2021 卷材涂层金属 测试方法 第25部分：耐湿性

Coil coated metals - Test methods - Part 25: Resistance to humidity

OENORM EN 13523-26-2021 卷材涂层金属 试验方法 第26部分：耐水冷凝

Coil coated metals - Test methods - Part 26: Resistance to condensation of water

OENORM EN 13523-3-2021 卷材涂层金属 试验方法 第3部分：色差 仪器比较

Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison

OENORM EN 13523-9-2021 卷材涂层金属 试验方法 第9部分：耐水浸

Coil coated metals - Test methods - Part 9: Resistance to water immersion

GOST R 9.411-2021 统一的腐蚀和老化保护系统 保护性有机涂层 分类

Unified system of corrosion and ageing protection. Protective organic coatings. Classification

PN-EN 13523-6-2020-12 E 卷材涂层金属 试验方法 第6部分：压痕后的附着力（杯突试验）

Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)

PN-EN 13523-18-2020-12 E 卷材涂层金属 试验方法 第18部分：耐污染性

Coil coated metals - Test methods - Part 18: Resistance to staining

PN-EN 13523-20-2020-12 E 卷材涂层金属 测试方法 第20部分：泡沫附着力

Coil coated metals - Test methods - Part 20: Foam adhesion

ASTM D6905-20 有机涂层冲击柔韧性的标准实施规程

1.1 This practice covers a procedure for determining the ability of a coating film and its substrate to resist shattering, cracking, or chipping when the film and substrate are distended beyond their original form by impact. 1.2 This practice does not measure impact resistance but uses rapid impact to improve Test Methods D522, a test method for flexibility. Since the impact of the coating is almost instantaneous, all of the problems associated with time variables in the mandrel tests are eliminated. 1.3 This practice is similar in content but not technically equivalent to Test Method D2794. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Impact Flexibility of Organic Coatings

ASTM D4828-94(2020) 有机涂料实用可洗性的标准试验方法

1.1 These test methods cover the determination of the relative ease of removal of common soil and stains from interior coatings by manual or mechanical washing with a sponge and a liquid or powder cleanser. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Practical Washability of Organic Coatings

ASTM A975-20 双扭六角网石笼和护墙垫（聚氯乙烯涂层的金属涂层钢丝或金属涂层钢丝）的标准规范

Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)