25.220.60 标准查询与下载

DIN EN 13523-7:2014 涂覆金属卷材.试验方法.第7部分:耐弯曲开裂(T弯曲试验);德文版本EN 13523-7:2014

Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2014

DIN EN 13523-9:2014 涂覆金属卷材.试验方法.第9部分:耐水浸性;德文版本EN 13523-9:2014

Coil coated metals - Test methods - Part 9: Resistance to water immersion; German version EN 13523-9:2014

DIN EN 13523-13:2014 覆层金属卷材.试验方法.第13部分:耐热加速老化性能;EN 13523-13:2014的德文版本

Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat; German version EN 13523-13:2014

DIN EN 13523-26:2014 卷材覆层金属.第26部分:耐水浓缩;EN 13523-26:2014的德文版本

Coil coated metals - Test methods - Part 26: Resistance to condensation of water; German version EN 13523-26:2014

DIN EN 13523-2:2014 涂覆金属卷材.试验方法.第2部分:光泽度;EN 13523-2:2014的德文版本

Coil coated metals - Test methods - Part 2: Gloss; German version EN 13523-2:2014

DIN EN 13523-25:2014 滚涂金属.试验方法.第25部分:耐潮性;EN 13523-25:2014的德文版本

Coil coated metals - Test methods - Part 25: Resistance to humidity; German version EN 13523-25:2014

DIN EN 13523-0:2014 涂覆金属卷材.试验方法.第0部分:总则;EN 13523-0:2014的德文版本

Coil coated metals - Test methods - Part 0: General introduction; German version EN 13523-0:2014

EN 13523-4:2014 线圈包覆金属.测试方法.第4部分:铅笔硬度

This part of EN 13523 describes the procedure to assess the relative hardness of an organic coating on a metallic substrate, by means of pencils of known hardness. Smooth surfaces will give more accurate results but the method is also applicable for textured surfaces. The more pronounced the texture, the greater the unreliability of results.

Coil coated metals - Test methods - Part 4: Pencil hardness

BS EN 13523-25:2014 卷状涂覆金属.试验方法.第25部分:耐湿性

Coil coated metals. Test methods. Resistance to humidity

BS EN 13523-26:2014 卷状涂覆金属.试验方法.第26部分:耐水浓缩

Coil coated metals. Test methods. Resistance to condensation of water

BS EN 13523-2:2014 卷材覆层金属.试验方法.光泽度

Coil coated metals. Test methods. Gloss

BS EN 13523-0:2014 卷材覆层金属.试验方法.一般说明

Coil coated metals. Test methods. General introduction

BS EN 13523-9:2014 卷材覆层金属.试验方法.耐水浸性能

Coil coated metals. Test methods. Resistance to water immersion

EN 13523-5:2014 卷材覆层金属的试验方法.第5部分:抗快速形变力(冲击试验)

This part of EN 13523 specifies the procedure for determining the resistance to cracking and/or pick-off on rapid deformation of an organic coating on a metallic substrate in terms of energy which the specimen will withstand.

Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)

EN 13523-7:2014 涂覆金属卷材的试验方法.第7部分:抗弯曲破裂力(T形弯曲试验)

This part of EN 13523 specifies the procedure for determining the resistance to cracking of an organic coating on a metallic substrate when bent through 135° to 180°. The degree of adhesion may also be evaluated. Both folding and mandrel methods are considered. The folding method is more often used for practical purposes but where more precise determinations are required, the mandrel method is recommended. The cylindrical bend method may also be used for a pass/fail decision by using an agreed mandrel. The choice of the appropriate test method is limited by the thickness and/or the hardness of the substrate. The feasibility of the test depends on the type and thickness of the substrate. During the procedure, the mandrel should not deform.

Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)

EN 13523-0:2014 卷材覆层金属的试验方法.第0部分:一般指导和试验方法列表

EN 13523 specifies test methods for organic coatings on coil coated metals. This part of EN 13523 specifies the overall scope of all parts of EN 13523, gives definitions common to all parts and describes how sampling and preparation of test panels for most of the individual test methods are to be carried out.

Coil coated metals - Test methods - Part 0: General introduction

EN 13523-3:2014 线圈包覆金属.测试方法.第3部分:色彩差异.仪器比较

This part of EN 13523 specifies procedures for determining the instrumental colour difference (CIELAB) of an organic coating on a metallic substrate. Establishing a standard as well as the magnitude of an acceptable colour difference are not covered by this method. Two methods are given in this part of EN 13523: a) instrumental colour difference measurement using a tristimulus colorimeter; b) instrumental colour difference measurement using a spectrophotometer or equivalent. Care should be taken when measuring e. g.- textured surfaces; - fluorescent coatings; - metameric coatings; - multi-coloured, pearlescent, metallic or special colour effect coatings. In order to determine whether metamerism is present, the metamerism index is determined (see EN 13523-15) and/or a visual examination (see EN 13523-22) is performed with different artificial light sources.

Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison

EN 13523-13:2014 线圈包覆金属.测试方法.第13部分:抵抗热处理造成的加速老化

This Part of EN 13523 specifies the procedure for determining the behaviour of an organic coating on a metallic substrate when submitted to accelerated ageing by heating at a defined temperature for a defined period of time. It is not possible to test heat resistance in such a way as to control all possible conditions of use. The aim of this test is therefore to furnish the basic test method for the effect of heat. Special applications might require that properties other than those mentioned in this Part of EN 13523 be checked. The test(s) to be done should then be agreed between the interested parties.

Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat

EN 13523-26:2014 线圈包覆金属.测试方法.第26部分:抵抗空气冷凝

This Part of EN 13523 specifies a procedure for evaluating the resistance to continuous condensation of an organic coating on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.

Coil coated metals - Test methods - Part 26: Resistance to condensation of water

EN 13523-9:2014 线圈包覆金属.测试方法.第9部分:抵抗水浸

This part of EN 13523 specifies the procedure for determining the resistance to water immersion of an organic coating on a metallic substrate. The test is applicable to all kinds of organic coatings, including metallics and embossed, textured, pearlescent and printed coatings. The results of the test give an indication of the resistance of the coil coated metal to water. The method is not intended to reproduce any particular condition of condensation.

Coil coated metals - Test methods - Part 9: Resistance to water immersion