27.060.10 液体和固体燃料燃烧器 标准查询与下载
共找到 326 条与 液体和固体燃料燃烧器 相关的标准，共 22 页
Water conditioning for boiler feed water and boiler water
- ICS
- 27.060.10
- CCS
- 发布
- 20220602
- 实施
- 20220602
The methods for installing wood pellet boiler
- ICS
- 27.060.10
- CCS
- 发布
- 20220602
- 实施
- 20220602
Maximum working pressure and super heated steam temperature of stationary steam boilers
- ICS
- 27.060.10
- CCS
- 发布
- 20220602
- 实施
- 20220602
宜宾市行政区域内无醇燃油的经营单位及使用单位（含工地、学校、企业、机关食堂、酒店、餐厅、农家乐、茶楼及个体商户等）的安全管理
Safety management regulations for the operation and use of alcohol-free fuel
- ICS
- 27.060.10
- CCS
- C 78
- 发布
- 2022-05-12
- 实施
- 2022-06-11
1.1 This test method covers relative stability of middle distillate fuels under high temperature aging conditions with limited air exposure. This test method is suitable for all No. 1 and No. 2 grades in Specifications D396, D975, D2880, and D3699. It is also suitable for similar fuels meeting other specifications. 1.2 This test method is not suitable for fuels whose flash point, as determined by Test Methods D56, D93, or D3828, is less than 38 °C. This test method is not suitable for fuels containing residual oil. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3.1 Exception—The maximum vacuum includes inchpound units in 6.5 and 11.2. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for High Temperature Stability of Middle Distillate Fuels
- ICS
- 27.060.10
- CCS
- 发布
- 2022-05-01
- 实施
1.1 This test method covers a method suitable for measuring the total amount of hydrogen sulfide (H2S) in heavy distillates, heavy distillate/residual fuel blends, or residual fuels as defined in Specification D396 Grade 4, 5 (Light), 5 (Heavy), and 6, when the H2S concentration in the fuel is in the 0.01 µg ⁄g (ppmw) to 100 µg ⁄g (ppmw) range. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 7.5, 8.2, 9.2, 10.1.4, and 11.1. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
- ICS
- 27.060.10
- CCS
- 发布
- 2022-04-01
- 实施
What is ISO 23553 ‑ 1 – Automatic and semi-automatic valves about? ISO 23553 ‑ 1 is an International Standard that focuses on safety and control devices for oil burners and oil burning appliances. ISO 23553 ‑ 1 specifies safety, constructional and performance requirements and testing of automatic and semi-automatic valves for oil. ISO 23553 ‑ 1 applies to automatic and semi-automatic valves which are: Normally closed
Safety and control devices for oil burners and oil-burning appliances. Particular requirements. Automatic and semi-automatic valves
- ICS
- 27.060.10
- CCS
- 发布
- 2022-03-31
- 实施
- 2022-03-31
This document specifies safety, constructional and performance requirements and testing of automatic and semi-automatic valves for oil. It applies to automatic and semi-automatic valves which are: — normally closed; — used in combustion plants to interrupt the oil flow with or without delay on closing; — for use with oil types (e.g. middle distillate fuel oil, crude oil, heavy fuel oil or kerosene) without gasoline; NOTE 1 For other oil types (e.g. oil emulsions), additional test methods can be agreed between the manufacturer and the test authority. NOTE 2 Oil types from petroleum refining processes are classified ISO-F-D in ISO 8216-99 and form part of a device having other function(s), such as oil pumps. In this case, the test methods apply to those parts or components of the device forming the automatic and semi-automatic valves, i.e. those parts which are necessary for the closing function. — for use on burners or in appliances using oil; — directly or indirectly operated, electrically or by mechanical or hydraulic means; — fitted with or without closed-position indicator switches. This document covers type testing only.
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2022)
- ICS
- 27.060.10
- CCS
- 发布
- 2022-02-23
- 实施
- 2022-05-31
This document specifies safety, constructional and performance requirements and testing of automatic and semi-automatic valves for oil. It applies to automatic and semi-automatic valves which are: — normally closed; — used in combustion plants to interrupt the oil flow with or without delay on closing; — for use with oil types (e.g. middle distillate fuel oil, crude oil, heavy fuel oil or kerosene) without gasoline; NOTE 1 For other oil types (e.g. oil emulsions), additional test methods can be agreed between the manufacturer and the test authority. NOTE 2 Oil types from petroleum refining processes are classified ISO-F-D in ISO 8216-99 and form part of a device having other function(s), such as oil pumps. In this case, the test methods apply to those parts or components of the device forming the automatic and semi-automatic valves, i.e. those parts which are necessary for the closing function. — for use on burners or in appliances using oil; — directly or indirectly operated, electrically or by mechanical or hydraulic means; — fitted with or without closed-position indicator switches. This document covers type testing only.
Safety and control devices for oil burners and oil-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves
- ICS
- 27.060.10
- CCS
- 发布
- 2022-02-15
- 实施
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO/FDIS 23553-1:2021)
- ICS
- 27.060.10
- CCS
- 发布
- 2021-10-00
- 实施
This document specifies the terminology, the general requirements for the construction and operation of forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners. This document applies to forced draught oil burners s
Forced draught burners for liquid fuels; German version EN 267:2020
- ICS
- 27.060.10
- CCS
- 发布
- 2021-09-00
- 实施
- 2021-09-01
Components for supply systems for consuming units with liquid fuels; Corrigendum AC
- ICS
- 27.060.10
- CCS
- 发布
- 2021-06-00
- 实施
- 2021-06-01
Components for supply systems for consuming units with liquid fuels
- ICS
- 27.060.10
- CCS
- 发布
- 2021-03-18
- 实施
- 2021-03-18
Components for supply systems for consuming units with liquid fuels
- ICS
- 27.060.10
- CCS
- 发布
- 2021-02-24
- 实施
- 2021-02-24
Components for supply systems for consuming units with liquid fuels
- ICS
- 27.060.10
- CCS
- 发布
- 2021-02-00
- 实施
Components for supply systems for consuming units with liquid fuels
- ICS
- 27.060.10
- CCS
- 发布
- 2021-01-21
- 实施
- 2021-01-21
Components for supply systems for consuming units with liquid fuels
- ICS
- 27.060.10
- CCS
- 发布
- 2021-01-00
- 实施
- 2021-01-01
Oil controler for oil burning appliances
- ICS
- 27.060.10
- CCS
- 发布
- 20201229
- 实施
- 20201229
