27.060.10 液体和固体燃料燃烧器 标准查询与下载
共找到 326 条与 液体和固体燃料燃烧器 相关的标准，共 22 页
This part of ISO 23553 specifies safety, constructional and performance requirements, and testing of safety shut-off devices, for liquid fuels.
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Shut-off devices for oil burners [Superseded: CEN EN 264]
- ICS
- 27.060.10
- CCS
- 发布
- 2009-06-01
- 实施
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Shut-off devices for oil burners; Technical Corrigendum 1
- ICS
- 27.060.10
- CCS
- Q83
- 发布
- 2009-02
- 实施
This European Standard specifies the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners.This European Standard applies to automatic forced draught oil burners supplied with: a fuel having a viscosity at the burner inlet of 1,6 mm2/s (cSt) up to 6 mm2/s (cSt) at 20 ℃; and higher boiling petroleum based first raffinates (viscosity greater than 6 mm 2 /s), that require preheating for proper atomisation.This European Standard is applicable to: single burners fitted to a single combustion chamber; single burners fitted to an appliance with additional requirements, then the relevant standard of this appliance shall be taken into account; single-fuel and dual-fuel burners when operating on oil only; the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, in which case the requirements of EN 676 will also apply in respect of the gaseous fuel function.This European Standard deals with all significant machine hazards, hazardous situations and events relevant to burners, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Annex J.This European Standard also deals with the additional requirements for the burners in the scope with pressurised parts and/or firing pressurised bodies, see Annex K.This European Standard specifies the requirements to be met by the manufacturer to ensure the safety during commissioning, start-up, operation, shut-down and maintenance.This European Standard does not deal with hazards due to specific applications.This European Standard is not applicable to automatic forced draught oil burners which are manufactured before the date of its publication as European Standard.
Automatic forced draught burners for liquid fuels (Incorporates Amendment A1: 2011)
- ICS
- 27.060.10
- CCS
- 发布
- 2009
- 实施
本标准规定了户用生物质炉具的技术、制造和安全使用要求、试验方法和检验规则等。本标准适用于燃用生物质成型燃料（颗粒状、块状、棒状等形状）的户用生物质炊事、采暖炉具及炊事采暖炉。
General technical specification of domestic biomass stove/boiler
- ICS
- 27.060.10
- CCS
- F13
- 发布
- 2008-3-28
- 实施
- 2008-5-1
本标准规定了金属热处理电阻炉的节能监测项目、方法及评价指标。本标准适用于热处理箱式、台车式、井式电阻炉和电热浴炉。
Regulations on Energy Saving Monitoring of Resistance Furnace for Heat Treatment
- ICS
- 27.060.10
- CCS
- J66
- 发布
- 2008-03-01
- 实施
- 2008-05-01
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps
- ICS
- 27.060.10
- CCS
- 发布
- 2008-01-15
- 实施
- 2008-01-15
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 2: Oil burner motors
- ICS
- 27.060.10
- CCS
- 发布
- 2008-01-15
- 实施
- 2008-01-15
This European Standard specifies the dimensions for connectors and certain dimensional characteristics of pumps for atomizing oil burners.
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps
- ICS
- 27.060.10
- CCS
- 发布
- 2008-01-11
- 实施
- 2008-01-11
本标准规定了以农作物秸秆燃气为燃料的燃气灶具的技术要求、试验方法和验收规则等内容。 本标准适用于以农作物秸秆燃气为燃料的家用燃气灶具。
Straw gasiner appliances
- ICS
- 27.060.10
- CCS
- J66
- 发布
- 2007-12-18
- 实施
- 2008-03-01
This European Standard specifies the dimensions of motors for atomizing oil burners.
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 2: Oil burner motors
- ICS
- 27.060.10
- CCS
- 发布
- 2007-12-17
- 实施
- 2007-12-17
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1 : oil burner pumps.
- ICS
- 27.060.10
- CCS
- J94
- 发布
- 2007-12-01
- 实施
- 2007-12-01
This European Standard specifies the dimensions of motors for atomizing oil burners.
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 2: Oil burner motors; English version of DIN EN 225-2:2007-12
- ICS
- 27.060.10
- CCS
- J94
- 发布
- 2007-12
- 实施
This European Standard specifies the dimensions for connectors and certain dimensional characteristics of pumps for atomizing oil burners.
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps; English version of DIN EN 225-1:2007-12
- ICS
- 27.060.10
- CCS
- J94
- 发布
- 2007-12
- 实施
이 규격은 주로 공업용 노 및 보일러 등에 사용하는 연소량 180 kg/h 이하의 저압 공
Low pressure air atomizing oil burners
- ICS
- 27.060.10
- CCS
- J74
- 发布
- 2007-10-31
- 实施
- 2007-10-31
Low pressure air atomizing oil burners
- ICS
- 27.060.10
- CCS
- 发布
- 2007-10-31
- 实施
This European Standard specifies the dimensions for connectors and certain dimensional characteristics of pumps for atomizing oil burners.
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Oil burner pumps
- ICS
- 27.060.10
- CCS
- J94
- 发布
- 2007-10-31
- 实施
- 2007-10-31
This European Standard specifies the dimensions of motors for atomizing oil burners.
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Oil burner motors
- ICS
- 27.060.10
- CCS
- J94
- 发布
- 2007-10-31
- 实施
- 2007-10-31
Low pressure air atomizing oil burners
- ICS
- 27.060.10
- CCS
- 发布
- 2007-10-31
- 实施
This part of ISO 23553 specifies safety, constructional and performance requirements, and testing of safety shut-off devices, for liquid fuels. This part of ISO 23553 covers type testing only. It applies to safety shut-off devices which: - are designed as e.g. automatic valves or fast-closing devices; - are used in combustion plants to interrupt the flow of liquid fuels with or without delay on closing and with or without delay on opening; - are for use with fuel oils; NOTE For other liquid fuels, additional test methods can be agreed between the manufacturer and the test authority. - form part of a device having other function(s), such as oil pumps. In this case the test methods apply to those parts or components of the device forming the safety shut-off device, i.e. those parts which are necessary for the closing function; - have declared maximum working pressures up to and including 5 000 kPa, for use on burners or in appliances using liquid fuels; - are directly or indirectly operated electrically or by mechanical or hydraulic means; - are fitted with or without closed-position indicator switches. The methods of test given in this part of ISO 23553 are intended for product type testing.
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Shut-off devices for oil burners
- ICS
- 27.060.10
- CCS
- Q83
- 发布
- 2007-09
- 实施
この規格は，ポリエチレン缶及びドラム缶の中の灯油を，石油燃焼機器などへ移すために用いる注油ポンプ(以下.ポンプという。)について規定する。
Filler pumps for oil burning appliances
- ICS
- 27.060.10
- CCS
- J94
- 发布
- 2007-03-20
- 实施
- 2007-03-20
