31.140 频率控制和选择用压电器件与介质器件 标准查询与下载
共找到 911 条与 频率控制和选择用压电器件与介质器件 相关的标准，共 61 页
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification (IEC 49/1360/CDV) (english version)
- ICS
- 31.140
- CCS
- 发布
- 2021-05-15
- 实施
- 2021-05-15
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 2: Guidelines for the use (IEC 49/1361/CDV) (english version)
- ICS
- 31.140
- CCS
- 发布
- 2021-05-15
- 实施
- 2021-05-15
Piezoelectric sensors - Part 1: Generic specifications (IEC 49/1357/CDV) (english version)
- ICS
- 31.140
- CCS
- 发布
- 2021-04-01
- 实施
- 2021-04-01
本文件规定了石英晶体微天平晶片的术语和定义、材料、技术要求、测量程序，检验规则及标志、包装、运输、贮存。 本文件适用于石英晶体微天平晶片。
Quartz Crystal Microbalance Element
- ICS
- 31.140
- CCS
- C398
- 发布
- 2021-03-04
- 实施
- 2021-08-06
(1)自由电容CT 10.50±1.05（nF） 根据压电检波器电容与灵敏度的实际匹配情况确定 (2)纵向压电应变常数d33 ≥600pC/N 根据压电检波器接收灵敏度实际需要确定 (3)居里温度Tc ≥210℃ 根据压电检波器温度稳定性要求确定
Piezoelectric ceramic element of hydrophone for solid cable in marine seismic exploration
- ICS
- 31.140
- CCS
- C4090
- 发布
- 2021-02-22
- 实施
- 2021-03-31
(1)声压灵敏度M（ref 1V/μPa） 192.5±1.5（dB） 根据装备的指标要求，并充分考虑使用寿命确定 (2)自由电容CT（1kHz） 8200±820（pF） 根据装备的电路匹配，并结合检波器的老化、失效情况确定 (3)绝缘电阻R ≥2×109Ω 根据实际使用环境要求确定，作为压电检波器水密性的判据
Piezoelectric hydrophone of solid cable for marine seismic exploration
- ICS
- 31.140
- CCS
- C4090
- 发布
- 2021-02-22
- 实施
- 2021-03-31
Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures (IEC 61837-2:2018/A1:2020)
- ICS
- 31.140
- CCS
- 发布
- 2021-01-15
- 实施
- 2021-01-15
Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) (IEC 49/1354/CDV) (english version)
- ICS
- 31.140
- CCS
- 发布
- 2021-01-01
- 实施
- 2021-01-01
Piezoelectric sensors - Part 3: Physical sensors (IEC 63041-3:2020)
- ICS
- 31.140
- CCS
- 发布
- 2020-12-15
- 实施
- 2020-12-15
本文件规定了叠层型压电陶瓷致动器的术语和定义、型号命名方法、测量和试验的大气条件、技术要求和试验方法、检验规则，以及标志、包装、运输和储存等。 本文件适用于无金属封装且无反馈电路的叠层型压电陶瓷致动器，供制定叠层型压电陶瓷致动器详细规范。
General specification for laminated piezoelectric ceramic actuators
- ICS
- 31.140
- CCS
- C398
- 发布
- 2020-12-02
- 实施
- 2020-12-08
Surface mounted piezoelectric devices for frequency control and selection – Standard outlines and terminal lead connections – Part 2: Ceramic enclosures
- ICS
- 31.140
- CCS
- 发布
- 2020-11-11
- 实施
- 2020-11-11
Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2 : ceramic enclosures
- ICS
- 31.140
- CCS
- 发布
- 2020-11-06
- 实施
- 2021-06-26
What is BS EN IEC 63041 ‑ 3 about? BS EN IEC 63041 ‑ 3 is the third part of in multi-series International standard on Piezoelectric sensors. BS EN IEC 63041 ‑ 3 applies to piezoelectric physical sensors mainly used in the field of process control, wireless monitoring, dynamics, thermodynamics, vacuum engineering, and environmental sciences. This document provides users with technical guidelines as well as basic knowledge of common physical sensors. Who is BS EN IEC 63041 ‑ 3 for ? BS EN IEC 63041 ‑ 3 on Piezoelectric sensors is useful for: Manufacturer of piezoelectric devices Aerospace Manufacturer of consumer electronic devices Nuclear instrumentation Why should you use BS EN IEC 63041 ‑ 3? Piezo...
Piezoelectric sensors - Physical sensors
- ICS
- 31.140
- CCS
- 发布
- 2020-09-30
- 实施
- 2020-09-30
IEC 63041-3:2020 is applicable to piezoelectric physical sensors mainly used in the field of process control, wireless monitoring, dynamics, thermodynamics, vacuum engineering, and environmental sciences. This document provides users with technical guidelines as well as basic knowledge of common physical sensors. Piezoelectric sensors covered herein are those applied to the detection and measurement of physical quantities such as force, pressure, torque, viscosity, temperature, film thickness, acceleration, vibration, and tilt angle.
Piezoelectric sensors - Part 3: Physical sensors
- ICS
- 31.140
- CCS
- 发布
- 2020-09-25
- 实施
- 2020-12-16 (7)
Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures
- ICS
- 31.140
- CCS
- 发布
- 2020-09-24
- 实施
Amendment 1 - Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures
- ICS
- 31.140
- CCS
- 发布
- 2020-09-24
- 实施
Piezoelectric sensors - Part 3: Physical sensors
- ICS
- 31.140
- CCS
- 发布
- 2020-08-12
- 实施
What is BS EN IEC 63155 about? BS EN IEC 63155 is an international standard used for radio frequency applications that specifies the power durability of surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices. BS EN IEC 63155 defines the measurement method for the determination of the durability of radio frequency (RF) surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices, such as filters and duplexers, with respect to high power RF signals, which are used in telecommunications, measuring equipment, radar systems and consumer products. RF BAW devices include two types: those based on the film bulk acoustic resonator (FBAR) technology and those based ...
Guidelines for the measurement method of power durability for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) applications
- ICS
- 31.140
- CCS
- 发布
- 2020-06-30
- 实施
- 2020-06-30
IEC 63155:2020 defines the measurement method for the determination of the durability of radio frequency (RF) surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices, such as filters and duplexers, with respect to high power RF signals, which are used in telecommunications, measuring equipment, radar systems and consumer products. RF BAW devices include two types: those based on the film bulk acoustic resonator (FBAR) technology and those based on the solidly mounted resonator (SMR) technology. This document includes basic properties of failure of RF SAW/BAW devices, and guidelines to set up the measurement system and to establish the procedure to estimate the time to failure (TF). Since TF is mainly governed by the RF power applied in the devices, discussions are focused on the power durability. It is not the aim of this document to explain the theory, or to attempt to cover all the eventualities which can arise in practical circumstances. This document draws attention to some of the more fundamental questions which will need to be considered by the user before he/she places an order for an RF SAW/BAW device for a new application. Such a procedure will be the user's means of preventing unsatisfactory performance related to premature device failure resulting from high-power exposure of RF SAW/BAW devices.
Guidelines for the measurement method of power durability for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) applications
- ICS
- 31.140
- CCS
- 发布
- 2020-06-19
- 实施
- 2020-08-29 (7)
Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection
- ICS
- 31.140
- CCS
- 发布
- 2020-05-27
- 实施
